| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a781edbbecfb4a0ebd22746b3110b2f130352509.1339076448.git.rubini@gnudd.com>
Date: Thu, 7 Jun 2012 15:52:49 +0200
From: Alessandro Rubini <rubini@...dd.com>
To: linux-kernel@...r.kernel.org
Cc: Giancarlo Asnaghi <giancarlo.asnaghi@...com>,
Alan Cox <alan@...ux.intel.com>,
Srinidhi Kasagar <srinidhi.kasagar@...ricsson.com>,
STEricsson_nomadik_linux@...t.st.com,
Linus Walleij <linus.walleij@...ricsson.com>,
Russell King <linux@....linux.org.uk>,
Jean Delvare <khali@...ux-fr.org>,
Wolfram Sang <w.sang@...gutronix.de>,
linux-arm-kernel@...ts.infradead.org, linux-i2c@...r.kernel.org,
Lee Jones <lee.jones@...aro.org>
Subject: [PATCH V2 2/3] i2c-nomadik: turn the platform driver to an amba
driver
The i2c-nomadik gateware is really a PrimeCell APB device. By hosting
the driver under the amba bus we can access it more easily, for
example using the generic pci-amba driver. The patch also fixes the
mach-ux500 users, so they register an amba device instead than a
platform device.
The cell-id I used in the amba table are the one for ux500 (only as far as
I know from the stn-8815 manuals) and the one for STA2X11.
Signed-off-by: Alessandro Rubini <rubini@...dd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@...com>
---
arch/arm/mach-ux500/devices-common.h | 21 +-----
drivers/i2c/busses/i2c-nomadik.c | 137 +++++++++++++++++-----------------
2 files changed, 71 insertions(+), 87 deletions(-)
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 23cf734..cfee556 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -56,27 +56,12 @@ dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
struct nmk_i2c_controller;
-static inline struct platform_device *
+static inline struct amba_device *
dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
struct nmk_i2c_controller *data)
{
- struct resource res[] = {
- DEFINE_RES_MEM(base, SZ_4K),
- DEFINE_RES_IRQ(irq),
- };
-
- struct platform_device_info pdevinfo = {
- .parent = parent,
- .name = "nmk-i2c",
- .id = id,
- .res = res,
- .num_res = ARRAY_SIZE(res),
- .data = data,
- .size_data = sizeof(*data),
- .dma_mask = DMA_BIT_MASK(32),
- };
-
- return platform_device_register_full(&pdevinfo);
+ return amba_apb_device_add(parent, "nmk-i2c", base, SZ_4K, irq, 0,
+ data, 0);
}
static inline struct amba_device *
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 752f1fd..e9ed731 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -14,7 +14,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
@@ -135,7 +135,7 @@ struct i2c_nmk_client {
/**
* struct nmk_i2c_dev - private data structure of the controller.
- * @pdev: parent platform device.
+ * @adev: parent amba device.
* @adap: corresponding I2C adapter.
* @irq: interrupt line for the controller.
* @virtbase: virtual io memory area.
@@ -149,7 +149,7 @@ struct i2c_nmk_client {
* @busy: Busy doing transfer.
*/
struct nmk_i2c_dev {
- struct platform_device *pdev;
+ struct amba_device *adev;
struct i2c_adapter adap;
int irq;
void __iomem *virtbase;
@@ -216,7 +216,7 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
}
}
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"flushing operation timed out giving up after %d attempts",
LOOP_ATTEMPTS);
@@ -363,7 +363,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
* and high speed (up to 3.4 Mb/s)
*/
if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"do not support this mode defaulting to std. mode\n");
brcr2 = i2c_clk/(100000 * 2) & 0xffff;
writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
@@ -422,7 +422,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
&dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"wait_for_completion_timeout "
"returned %d waiting for event\n", timeout);
status = timeout;
@@ -430,7 +430,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
if (timeout == 0) {
/* Controller timed out */
- dev_err(&dev->pdev->dev, "read from slave 0x%x timed out\n",
+ dev_err(&dev->adev->dev, "read from slave 0x%x timed out\n",
dev->cli.slave_adr);
status = -ETIMEDOUT;
}
@@ -509,7 +509,7 @@ static int write_i2c(struct nmk_i2c_dev *dev)
&dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"wait_for_completion_timeout "
"returned %d waiting for event\n", timeout);
status = timeout;
@@ -517,7 +517,7 @@ static int write_i2c(struct nmk_i2c_dev *dev)
if (timeout == 0) {
/* Controller timed out */
- dev_err(&dev->pdev->dev, "write to slave 0x%x timed out\n",
+ dev_err(&dev->adev->dev, "write to slave 0x%x timed out\n",
dev->cli.slave_adr);
status = -ETIMEDOUT;
}
@@ -556,7 +556,7 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
if (((i2c_sr >> 2) & 0x3) == 0x3) {
/* get the abort cause */
cause = (i2c_sr >> 4) & 0x7;
- dev_err(&dev->pdev->dev, "%s\n",
+ dev_err(&dev->adev->dev, "%s\n",
cause >= ARRAY_SIZE(abort_causes) ?
"unknown reason" :
abort_causes[cause]);
@@ -629,7 +629,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
if (dev->regulator)
regulator_enable(dev->regulator);
- pm_runtime_get_sync(&dev->pdev->dev);
+ pm_runtime_get_sync(&dev->adev->dev);
clk_enable(dev->clk);
@@ -644,7 +644,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
for (i = 0; i < num_msgs; i++) {
if (unlikely(msgs[i].flags & I2C_M_TEN)) {
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"10 bit addressing not supported\n");
status = -EINVAL;
@@ -666,7 +666,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
out:
clk_disable(dev->clk);
- pm_runtime_put_sync(&dev->pdev->dev);
+ pm_runtime_put_sync(&dev->adev->dev);
if (dev->regulator)
regulator_disable(dev->regulator);
@@ -789,7 +789,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
if (dev->cli.count) {
dev->result = -EIO;
- dev_err(&dev->pdev->dev,
+ dev_err(&dev->adev->dev,
"%lu bytes still remain to be xfered\n",
dev->cli.count);
(void) init_hw(dev);
@@ -833,7 +833,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
dev->result = -EIO;
(void) init_hw(dev);
- dev_err(&dev->pdev->dev, "Tx Fifo Over run\n");
+ dev_err(&dev->adev->dev, "Tx Fifo Over run\n");
complete(&dev->xfer_complete);
break;
@@ -846,10 +846,10 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
case I2C_IT_RFSE:
case I2C_IT_WTSR:
case I2C_IT_STD:
- dev_err(&dev->pdev->dev, "unhandled Interrupt\n");
+ dev_err(&dev->adev->dev, "unhandled Interrupt\n");
break;
default:
- dev_err(&dev->pdev->dev, "spurious Interrupt..\n");
+ dev_err(&dev->adev->dev, "spurious Interrupt..\n");
break;
}
@@ -860,8 +860,8 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
#ifdef CONFIG_PM
static int nmk_i2c_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct nmk_i2c_dev *nmk_i2c = platform_get_drvdata(pdev);
+ struct amba_device *adev = to_amba_device(dev);
+ struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
if (nmk_i2c->busy)
return -EBUSY;
@@ -898,79 +898,67 @@ static const struct i2c_algorithm nmk_i2c_algo = {
.functionality = nmk_i2c_functionality
};
-static int __devinit nmk_i2c_probe(struct platform_device *pdev)
+static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
- struct resource *res;
struct nmk_i2c_controller *pdata =
- pdev->dev.platform_data;
+ adev->dev.platform_data;
struct nmk_i2c_dev *dev;
struct i2c_adapter *adap;
+ if (!pdata) {
+ dev_warn(&adev->dev, "no platform data\n");
+ return -ENODEV;
+ }
dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
if (!dev) {
- dev_err(&pdev->dev, "cannot allocate memory\n");
+ dev_err(&adev->dev, "cannot allocate memory\n");
ret = -ENOMEM;
goto err_no_mem;
}
dev->busy = false;
- dev->pdev = pdev;
- platform_set_drvdata(pdev, dev);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENOENT;
- goto err_no_resource;
- }
+ dev->adev = adev;
+ amba_set_drvdata(adev, dev);
- if (request_mem_region(res->start, resource_size(res),
- DRIVER_NAME "I/O region") == NULL) {
- ret = -EBUSY;
- goto err_no_region;
- }
-
- dev->virtbase = ioremap(res->start, resource_size(res));
+ dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
if (!dev->virtbase) {
ret = -ENOMEM;
goto err_no_ioremap;
}
- dev->irq = platform_get_irq(pdev, 0);
+ dev->irq = adev->irq[0];
ret = request_irq(dev->irq, i2c_irq_handler, 0,
DRIVER_NAME, dev);
if (ret) {
- dev_err(&pdev->dev, "cannot claim the irq %d\n", dev->irq);
+ dev_err(&adev->dev, "cannot claim the irq %d\n", dev->irq);
goto err_irq;
}
- dev->regulator = regulator_get(&pdev->dev, "v-i2c");
+ dev->regulator = regulator_get(&adev->dev, "v-i2c");
if (IS_ERR(dev->regulator)) {
- dev_warn(&pdev->dev, "could not get i2c regulator\n");
+ dev_warn(&adev->dev, "could not get i2c regulator\n");
dev->regulator = NULL;
}
- pm_suspend_ignore_children(&pdev->dev, true);
- pm_runtime_enable(&pdev->dev);
+ pm_suspend_ignore_children(&adev->dev, true);
+ pm_runtime_enable(&adev->dev);
- dev->clk = clk_get(&pdev->dev, NULL);
+ dev->clk = clk_get(&adev->dev, NULL);
if (IS_ERR(dev->clk)) {
- dev_err(&pdev->dev, "could not get i2c clock\n");
+ dev_err(&adev->dev, "could not get i2c clock\n");
ret = PTR_ERR(dev->clk);
goto err_no_clk;
}
adap = &dev->adap;
- adap->dev.parent = &pdev->dev;
+ adap->dev.parent = &adev->dev;
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &nmk_i2c_algo;
adap->timeout = pdata->timeout ? msecs_to_jiffies(pdata->timeout) :
msecs_to_jiffies(20000);
snprintf(adap->name, sizeof(adap->name),
- "Nomadik I2C%d at %lx", pdev->id, (unsigned long)res->start);
-
- /* fetch the controller id */
- adap->nr = pdev->id;
+ "Nomadik I2C%d at %pR", adap->nr, &adev->res);
/* fetch the controller configuration from machine */
dev->cfg.clk_freq = pdata->clk_freq;
@@ -981,13 +969,13 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(adap, dev);
- dev_info(&pdev->dev,
+ dev_info(&adev->dev,
"initialize %s on virtual base %p\n",
adap->name, dev->virtbase);
ret = i2c_add_numbered_adapter(adap);
if (ret) {
- dev_err(&pdev->dev, "failed to add adapter\n");
+ dev_err(&adev->dev, "failed to add adapter\n");
goto err_add_adap;
}
@@ -998,25 +986,22 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
err_no_clk:
if (dev->regulator)
regulator_put(dev->regulator);
- pm_runtime_disable(&pdev->dev);
+ pm_runtime_disable(&adev->dev);
free_irq(dev->irq, dev);
err_irq:
iounmap(dev->virtbase);
err_no_ioremap:
- release_mem_region(res->start, resource_size(res));
- err_no_region:
- platform_set_drvdata(pdev, NULL);
- err_no_resource:
+ amba_set_drvdata(adev, NULL);
kfree(dev);
err_no_mem:
return ret;
}
-static int __devexit nmk_i2c_remove(struct platform_device *pdev)
+static int nmk_i2c_remove(struct amba_device *adev)
{
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- struct nmk_i2c_dev *dev = platform_get_drvdata(pdev);
+ struct resource *res = &adev->res;
+ struct nmk_i2c_dev *dev = amba_get_drvdata(adev);
i2c_del_adapter(&dev->adap);
flush_i2c_fifo(dev);
@@ -1031,31 +1016,46 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
clk_put(dev->clk);
if (dev->regulator)
regulator_put(dev->regulator);
- pm_runtime_disable(&pdev->dev);
- platform_set_drvdata(pdev, NULL);
+ pm_runtime_disable(&adev->dev);
+ amba_set_drvdata(adev, NULL);
kfree(dev);
return 0;
}
-static struct platform_driver nmk_i2c_driver = {
- .driver = {
+static struct amba_id nmk_i2c_ids[] = {
+ {
+ .id = 0x00018024,
+ .mask = 0x00ffffff,
+ },
+ {
+ .id = 0x00380024,
+ .mask = 0x00ffffff,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(amba, nmk_i2c_ids);
+
+static struct amba_driver nmk_i2c_driver = {
+ .drv = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.pm = &nmk_i2c_pm,
},
+ .id_table = nmk_i2c_ids,
.probe = nmk_i2c_probe,
- .remove = __devexit_p(nmk_i2c_remove),
+ .remove = nmk_i2c_remove,
};
static int __init nmk_i2c_init(void)
{
- return platform_driver_register(&nmk_i2c_driver);
+ return amba_driver_register(&nmk_i2c_driver);
}
static void __exit nmk_i2c_exit(void)
{
- platform_driver_unregister(&nmk_i2c_driver);
+ amba_driver_unregister(&nmk_i2c_driver);
}
subsys_initcall(nmk_i2c_init);
@@ -1064,4 +1064,3 @@ module_exit(nmk_i2c_exit);
MODULE_AUTHOR("Sachin Verma, Srinidhi KASAGAR");
MODULE_DESCRIPTION("Nomadik/Ux500 I2C driver");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRIVER_NAME);
--
1.7.7.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists