[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1339164125-32534-5-git-send-email-peter.ujfalusi@ti.com>
Date: Fri, 8 Jun 2012 17:02:02 +0300
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: Russell King <linux@....linux.org.uk>,
Benoit Cousson <b-cousson@...com>,
Tony Lindgren <tony@...mide.com>,
Grant Likely <grant.likely@...retlab.ca>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree-discuss@...ts.ozlabs.org, linux-omap@...r.kernel.org,
Rajendra Nayak <rnayak@...com>, Liam Girdwood <lrg@...com>
Subject: [PATCH 4/7] arm/dts: omap4-sdp: Add support for twl6040
The twl6040 provides the audio and vibra support on OMAP4 SDP boards.
It is connected to i2c1 bus with 0x4b address.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
arch/arm/boot/dts/omap4-sdp.dts | 25 +++++++++++++++++++++++++
1 files changed, 25 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 4b51611..f09d1f5 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -99,6 +99,31 @@
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+
+ /* regulators for vibra motor */
+ vddvibl-supply = <&vbat>;
+ vddvibr-supply = <&vbat>;
+
+ vibra {
+ /* Vibra driver, motor resistance parameters */
+ ti,vibldrv-res = <8>;
+ ti,vibrdrv-res = <3>;
+ ti,viblmotor-res = <10>;
+ ti,vibrmotor-res = <10>;
+ };
+ };
};
/include/ "twl6030.dtsi"
--
1.7.8.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists