lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 11 Jun 2012 20:01:20 +0900
From:	Jonghwa Lee <jonghwa3.lee@...sung.com>
To:	linux-kernel@...r.kernel.org,
	Mike Turquette <mturquette@...aro.org>,
	Arnd Bergmann <arnd@...db.de>
Cc:	Hartley Sweeten <hsweeten@...ionengravers.com>,
	Mark Brown <broonie@...nsource.wolfsonmicro.com>,
	Jonghwa Lee <jonghwa3.lee@...sung.com>,
	MyungJoo Ham <myungjoo.ham@...sung.com>,
	Kyungmin Park <kyungmin.park@...sung.com>
Subject: [PATCH v3] clock: max77686: Add driver for Maxim 77686 32KHz crystal
 oscillator

Maxim 77686 has three 32KHz clock outputs through the its crystal oscillator.
This driver can control those ouputs by I2C bus. The clocks are used to supply
to SOC and peripheral chips as a clock source. Clocks can be enabled/disabled only.
It uses regmap interface to communicate with I2C bus.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
---
v3
 - Add mutex to the max77686_clk structure to make atomic execution of enable/disable function.

v2
 - Modify Kconfig symbol to depend on COMMON_CLK and MFD_MAX77686
 - Fix max77686_clk structure and get_max77686_clk fuction to remove obscure points.

 drivers/clk/Kconfig        |    8 ++
 drivers/clk/Makefile       |    2 +
 drivers/clk/clk-max77686.c |  209 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 219 insertions(+), 0 deletions(-)
 create mode 100644 drivers/clk/clk-max77686.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 165e1fe..3f63330 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -45,3 +45,11 @@ config COMMON_CLK_DEBUG
 	  clk_notifier_count.
 
 endmenu
+
+config CLK_MAX77686
+	tristate "Maxim 77686 32KHz crystal oscillator driver"
+	depends on MFD_MAX77686 && COMMON_CLK
+	---help---
+	  This driver supports for Maxim 77686's crystal oscillator.
+	  Maxim 77686 has three 32KHz buffered outputs and It can
+	  controls them over I2C bus.
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 1f736bc..a952555b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -2,3 +2,5 @@
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
 				   clk-mux.o clk-divider.o
+
+obj-$(CONFIG_CLK_MAX77686)	+= clk-max77686.o
diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
new file mode 100644
index 0000000..bf4d452
--- /dev/null
+++ b/drivers/clk/clk-max77686.c
@@ -0,0 +1,209 @@
+/*
+ * clk-max77686.c - Clock driver for Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electornics
+ * Jonghwa Lee <jonghwa3.lee@...sung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+#include <linux/clk-private.h>
+#include <linux/mutex.h>
+
+enum {
+	MAX77686_32KH_AP,
+	MAX77686_32KH_CP,
+	MAX77686_P32KH,
+	MAX77686_CLKS_NUM,
+};
+
+struct max77686_clk {
+	struct max77686_dev *iodev;
+	u32 mask;
+	struct clk_hw hw;
+	struct mutex mutex;
+};
+
+struct clk *clk32khz_ap;
+struct clk *clk32khz_cp;
+struct clk *clk32khz_pmic;
+char *max77686_clks[] = {
+	"32khap",
+	"32khcp",
+	"p32kh",
+};
+
+static struct max77686_clk *get_max77686_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct max77686_clk, hw);
+}
+
+static int max77686_clk_enable(struct clk_hw *hw)
+{
+	struct max77686_clk *max77686;
+	int ret;
+
+	max77686 = get_max77686_clk(hw);
+	if (!max77686)
+		return -ENOMEM;
+
+	mutex_lock(&max77686->mutex);
+	ret = regmap_update_bits(max77686->iodev->regmap,
+		MAX77686_REG_32KHZ, max77686->mask, max77686->mask);
+	mutex_unlock(&max77686->mutex);
+
+	return ret;
+}
+
+static void max77686_clk_disable(struct clk_hw *hw)
+{
+	struct max77686_clk *max77686;
+
+	max77686 = get_max77686_clk(hw);
+	if (!max77686)
+		return;
+
+	mutex_lock(&max77686->mutex);
+	regmap_update_bits(max77686->iodev->regmap,
+		MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
+	mutex_unlock(&max77686->mutex);
+}
+
+static int max77686_clk_is_enabled(struct clk_hw *hw)
+{
+	struct max77686_clk *max77686 = NULL;
+	int ret;
+	u32 val;
+
+	max77686 = get_max77686_clk(hw);
+	if (!max77686)
+		return -ENOMEM;
+
+	mutex_lock(&max77686->mutex);
+	ret = regmap_read(max77686->iodev->regmap,
+				MAX77686_REG_32KHZ, &val);
+	mutex_unlock(&max77686->mutex);
+
+	if (ret < 0)
+		return -EINVAL;
+
+	return val & max77686->mask;
+}
+
+static struct clk_ops max77686_clk_ops = {
+	.enable		= max77686_clk_enable,
+	.disable	= max77686_clk_disable,
+	.is_enabled	= max77686_clk_is_enabled,
+};
+
+
+static __devinit int max77686_clk_probe(struct platform_device *pdev)
+{
+	struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct max77686_clk *max77686[MAX77686_CLKS_NUM];
+	int i, ret;
+
+	for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+		max77686[i] = devm_kzalloc(&pdev->dev,
+				 sizeof(struct max77686_clk), GFP_KERNEL);
+		if (!max77686[i])
+			return -ENOMEM;
+
+		max77686[i]->iodev = iodev;
+		max77686[i]->mask = 1 << i;
+		mutex_init(&max77686[i]->mutex);
+	}
+
+
+	clk32khz_ap = clk_register(&pdev->dev, max77686_clks[MAX77686_32KH_AP],
+				&max77686_clk_ops,
+				&max77686[MAX77686_32KH_AP]->hw,
+				NULL, 0, CLK_IS_ROOT);
+	if (IS_ERR(clk32khz_ap)) {
+		ret = PTR_ERR(clk32khz_ap);
+		goto err;
+	}
+
+	clk32khz_cp = clk_register(&pdev->dev, max77686_clks[MAX77686_32KH_CP],
+				&max77686_clk_ops,
+				&max77686[MAX77686_32KH_CP]->hw,
+				NULL, 0, CLK_IS_ROOT);
+	if (IS_ERR(clk32khz_cp)) {
+		ret = PTR_ERR(clk32khz_cp);
+		goto err;
+	}
+
+	clk32khz_pmic = clk_register(&pdev->dev, max77686_clks[MAX77686_P32KH],
+				&max77686_clk_ops,
+				&max77686[MAX77686_P32KH]->hw,
+				NULL, 0, CLK_IS_ROOT);
+	if (IS_ERR(clk32khz_pmic)) {
+		ret = PTR_ERR(clk32khz_pmic);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	dev_err(&pdev->dev, "Fail to register clock\n");
+	return ret;
+}
+
+static int __devexit max77686_clk_remove(struct platform_device *pdev)
+{
+	kfree(clk32khz_ap);
+	kfree(clk32khz_cp);
+	kfree(clk32khz_pmic);
+	return 0;
+}
+
+static const struct platform_device_id max77686_clk_id[] = {
+	{ "max77686-clk", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, max77686_clk_id);
+
+static struct platform_driver max77686_clk_driver = {
+	.driver = {
+		.name  = "max77686-clk",
+		.owner = THIS_MODULE,
+	},
+	.probe = max77686_clk_probe,
+	.remove = __devexit_p(max77686_clk_remove),
+	.id_table = max77686_clk_id,
+};
+
+static int __init max77686_clk_init(void)
+{
+	return platform_driver_register(&max77686_clk_driver);
+}
+subsys_initcall(max77686_clk_init);
+
+static void __init max77686_clk_cleanup(void)
+{
+	platform_driver_unregister(&max77686_clk_driver);
+}
+module_exit(max77686_clk_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 77686 Clock Driver");
+MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@...sung.com>");
+MODULE_LICENSE("GPL");
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ