| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20120613152751.26274816833e07c29a63ba3d@canb.auug.org.au>
Date: Wed, 13 Jun 2012 15:27:51 +1000
From: Stephen Rothwell <sfr@...b.auug.org.au>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-next@...r.kernel.org, linux-kernel@...r.kernel.org,
Stefan Roese <sr@...x.de>, David Miller <davem@...emloft.net>,
<netdev@...r.kernel.org>, Viresh Kumar <viresh.kumar@...com>
Subject: linux-next: manual merge of the akpm tree with the net tree
Hi Andrew,
Today's linux-next merge of the akpm tree got a conflict in
drivers/net/ethernet/stmicro/stmmac/stmmac.h between commit 883ffd6e6411
("net: stmmac: Fix clock en-/disable calls") from the net tree and commit
"net/stmmac: remove conditional compilation of clk code" from the akpm
tree.
I fixed it up (I think - see below) and can carry the fix as necessary.
--
Cheers,
Stephen Rothwell sfr@...b.auug.org.au
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index dc20c56..900c5e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -82,9 +82,7 @@ struct stmmac_priv {
struct stmmac_counters mmc;
struct dma_features dma_cap;
int hw_cap_support;
-#ifdef CONFIG_HAVE_CLK
struct clk *stmmac_clk;
-#endif
int clk_csr;
int synopsys_id;
};
@@ -105,46 +103,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
struct plat_stmmacenet_data *plat_dat,
void __iomem *addr);
-#ifdef CONFIG_HAVE_CLK
-static inline int stmmac_clk_enable(struct stmmac_priv *priv)
-{
- if (!IS_ERR(priv->stmmac_clk))
- return clk_prepare_enable(priv->stmmac_clk);
-
- return 0;
-}
-
-static inline void stmmac_clk_disable(struct stmmac_priv *priv)
-{
- if (IS_ERR(priv->stmmac_clk))
- return;
-
- clk_disable_unprepare(priv->stmmac_clk);
-}
-static inline int stmmac_clk_get(struct stmmac_priv *priv)
-{
- priv->stmmac_clk = clk_get(priv->device, NULL);
-
- if (IS_ERR(priv->stmmac_clk))
- return PTR_ERR(priv->stmmac_clk);
-
- return 0;
-}
-#else
-static inline int stmmac_clk_enable(struct stmmac_priv *priv)
-{
- return 0;
-}
-static inline void stmmac_clk_disable(struct stmmac_priv *priv)
-{
-}
-static inline int stmmac_clk_get(struct stmmac_priv *priv)
-{
- return 0;
-}
-#endif /* CONFIG_HAVE_CLK */
-
-
#ifdef CONFIG_STMMAC_PLATFORM
extern struct platform_driver stmmac_pltfr_driver;
static inline int stmmac_register_platform(void)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 590e95b..bb63678 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -28,6 +28,7 @@
https://bugzilla.stlinux.com/
*******************************************************************************/
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/ip.h>
@@ -165,12 +166,8 @@ static void stmmac_verify_args(void)
static void stmmac_clk_csr_set(struct stmmac_priv *priv)
{
-#ifdef CONFIG_HAVE_CLK
u32 clk_rate;
- if (IS_ERR(priv->stmmac_clk))
- return;
-
clk_rate = clk_get_rate(priv->stmmac_clk);
/* Platform provided default clk_csr would be assumed valid
@@ -192,7 +189,6 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
* we can not estimate the proper divider as it is not known
* the frequency of clk_csr_i. So we do not change the default
* divider. */
-#endif
}
#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
@@ -974,7 +970,7 @@ static int stmmac_open(struct net_device *dev)
} else
priv->tm->enable = 1;
#endif
- stmmac_clk_enable(priv);
+ clk_prepare_enable(priv->stmmac_clk);
stmmac_check_ether_addr(priv);
@@ -1078,7 +1074,7 @@ open_error:
if (priv->phydev)
phy_disconnect(priv->phydev);
- stmmac_clk_disable(priv);
+ clk_disable_unprepare(priv->stmmac_clk);
return ret;
}
@@ -1131,7 +1127,7 @@ static int stmmac_release(struct net_device *dev)
#ifdef CONFIG_STMMAC_DEBUG_FS
stmmac_exit_fs();
#endif
- stmmac_clk_disable(priv);
+ clk_disable_unprepare(priv->stmmac_clk);
return 0;
}
@@ -1926,11 +1922,14 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
ret = register_netdev(ndev);
if (ret) {
pr_err("%s: ERROR %i registering the device\n", __func__, ret);
- goto error;
+ goto error_netdev_register;
}
- if (stmmac_clk_get(priv))
+ priv->stmmac_clk = clk_get(priv->device, NULL);
+ if (IS_ERR(priv->stmmac_clk)) {
pr_warning("%s: warning: cannot get CSR clock\n", __func__);
+ goto error_clk_get;
+ }
/* If a specific clk_csr value is passed from the platform
* this means that the CSR Clock Range selection cannot be
@@ -1948,15 +1947,17 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
if (ret < 0) {
pr_debug("%s: MDIO bus (id: %d) registration failed",
__func__, priv->plat->bus_id);
- goto error;
+ goto error_mdio_register;
}
return priv;
-error:
- netif_napi_del(&priv->napi);
-
+error_mdio_register:
+ clk_put(priv->stmmac_clk);
+error_clk_get:
unregister_netdev(ndev);
+error_netdev_register:
+ netif_napi_del(&priv->napi);
free_netdev(ndev);
return NULL;
@@ -2025,7 +2026,7 @@ int stmmac_suspend(struct net_device *ndev)
else {
stmmac_set_mac(priv->ioaddr, false);
/* Disable clock in case of PWM is off */
- stmmac_clk_disable(priv);
+ clk_disable_unprepare(priv->stmmac_clk);
}
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
@@ -2050,7 +2051,7 @@ int stmmac_resume(struct net_device *ndev)
priv->hw->mac->pmt(priv->ioaddr, 0);
else
/* enable the clk prevously disabled */
- stmmac_clk_enable(priv);
+ clk_prepare_enable(priv->stmmac_clk);
netif_device_attach(ndev);
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists