| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1339606749-4578-4-git-send-email-andrew@asquaredlabs.com>
Date: Wed, 13 Jun 2012 12:59:09 -0400
From: Andrew Armenia <andrew@...uaredlabs.com>
To: Jean Delvare <khali@...ux-fr.org>, Ben Dooks <ben-linux@...ff.org>,
Wolfram Sang <w.sang@...gutronix.de>
Cc: linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
Andrew Armenia <andrew@...uaredlabs.com>
Subject: [PATCH 3/3] i2c-piix4: support AMD auxiliary SMBus controller
Some AMD chipsets, such as the SP5100, have an auxiliary SMBus
controller with a second set of registers. This patch adds
support for this auxiliary controller.
Tested on ASUS KCMA-D8 motherboard.
Signed-off-by: Andrew Armenia <andrew@...uaredlabs.com>
---
Documentation/i2c/busses/i2c-piix4 | 13 +++++--
drivers/i2c/busses/Kconfig | 6 +++-
drivers/i2c/busses/i2c-piix4.c | 69 ++++++++++++++++++++++++++++++++++--
3 files changed, 82 insertions(+), 6 deletions(-)
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index 475bb4a..474779e 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -8,12 +8,17 @@ Supported adapters:
Datasheet: Only available via NDA from ServerWorks
* ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
Datasheet: Not publicly available
+ SB700 register reference available at:
+ http://support.amd.com/us/Embedded_TechDocs/43009_sb7xx_rrg_pub_1.00.pdf
+ * AMD SP5100 (SB700 derivative found on some server mainboards)
+ Datasheet: Publicly available at the AMD website
+ http://support.amd.com/us/Embedded_TechDocs/44413.pdf
* AMD Hudson-2
Datasheet: Not publicly available
* Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
Datasheet: Publicly available at the SMSC website http://www.smsc.com
-Authors:
+Authors:
Frodo Looijaard <frodol@....nl>
Philip Edelbrock <phil@...roedge.com>
@@ -32,7 +37,7 @@ Description
The PIIX4 (properly known as the 82371AB) is an Intel chip with a lot of
functionality. Among other things, it implements the PCI bus. One of its
-minor functions is implementing a System Management Bus. This is a true
+minor functions is implementing a System Management Bus. This is a true
SMBus - you can not access it on I2C levels. The good news is that it
natively understands SMBus commands and you do not have to worry about
timing problems. The bad news is that non-SMBus devices connected to it can
@@ -68,6 +73,10 @@ this driver on those mainboards.
The ServerWorks Southbridges, the Intel 440MX, and the Victory66 are
identical to the PIIX4 in I2C/SMBus support.
+The AMD SB700 and SP5100 chipsets implement two PIIX4-compatible SMBus
+controllers. If your BIOS initializes the secondary controller, it will
+be detected by this driver as an "Auxiliary SMBus Host Controller".
+
If you own Force CPCI735 motherboard or other OSB4 based systems you may need
to change the SMBus Interrupt Select register so the SMBus controller uses
the SMI mode.
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 7244c8b..2e7530a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -133,7 +133,7 @@ config I2C_PIIX4
ATI IXP300
ATI IXP400
ATI SB600
- ATI SB700
+ ATI SB700/SP5100
ATI SB800
AMD Hudson-2
Serverworks OSB4
@@ -143,6 +143,10 @@ config I2C_PIIX4
Serverworks HT-1100
SMSC Victory66
+ Some AMD chipsets contain two PIIX4-compatible SMBus
+ controllers. This driver will attempt to use both controllers
+ on the SB700/SP5100, if they have been initialized by the BIOS.
+
This driver can also be built as a module. If so, the module
will be called i2c-piix4.
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 8181963..85d3db9 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -21,11 +21,12 @@
Supports:
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
- ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
+ ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
AMD Hudson-2
SMSC Victory66
- Note: we assume there can only be one device, with one SMBus interface.
+ Note: we assume there can only be one device, with one or more
+ SMBus interfaces.
*/
#include <linux/module.h>
@@ -60,6 +61,7 @@
#define SMBIOSIZE 8
/* PCI Address Constants */
+#define SMBAUXBA 0x058
#define SMBBA 0x090
#define SMBHSTCFG 0x0D2
#define SMBSLVC 0x0D3
@@ -293,6 +295,43 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev,
return piix4_smba;
}
+static int __devinit piix4_setup_aux(struct pci_dev *PIIX4_dev,
+ const struct pci_device_id *id,
+ unsigned short base_reg_addr)
+{
+ /* Set up auxiliary SMBus controllers found on some
+ * AMD chipsets e.g. SP5100 (SB700 derivative) */
+
+ unsigned short piix4_smba;
+
+ /* Read address of auxiliary SMBus controller */
+ pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba);
+ piix4_smba &= 0xffe0;
+
+ if (piix4_smba == 0) {
+ dev_dbg(&PIIX4_dev->dev,
+ "Auxiliary SMBus base address uninitialized");
+
+ return -ENODEV;
+ }
+
+ if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+ return -ENODEV;
+
+ if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
+ dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x "
+ "already in use!\n", piix4_smba);
+ return -EBUSY;
+ }
+
+ dev_info(&PIIX4_dev->dev,
+ "Auxiliary SMBus Host Controller at 0x%x\n",
+ piix4_smba
+ );
+
+ return piix4_smba;
+}
+
static int piix4_transaction(struct i2c_adapter *piix4_adapter)
{
int temp;
@@ -504,6 +543,7 @@ static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = {
MODULE_DEVICE_TABLE (pci, piix4_ids);
static struct i2c_adapter *piix4_main_adapter;
+static struct i2c_adapter *piix4_aux_adapter;
static int __devinit piix4_add_adapter(struct pci_dev *dev,
unsigned short smba,
@@ -565,10 +605,28 @@ static int __devinit piix4_probe(struct pci_dev *dev,
else
retval = piix4_setup(dev, id);
+ /* if no main SMBus found, give up */
if (retval < 0)
return retval;
- return piix4_add_adapter(dev, retval, &piix4_main_adapter);
+ /* try to register main SMBus adapter, give up if we can't */
+ retval = piix4_add_adapter(dev, retval, &piix4_main_adapter);
+ if (retval < 0)
+ return retval;
+
+ /* check for auxiliary SMBus on some AMD chipsets */
+ if (dev->vendor == PCI_VENDOR_ID_ATI &&
+ dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+ dev->revision < 0x40) {
+ retval = piix4_setup_aux(dev, id, SMBAUXBA);
+ if (retval > 0) {
+ /* try to add the aux adapter if it exists,
+ * piix4_add_adapter will clean up if this fails */
+ piix4_add_adapter(dev, retval, &piix4_aux_adapter);
+ }
+ }
+
+ return 0;
}
static void __devinit piix4_adap_remove(struct i2c_adapter *adap)
@@ -590,6 +648,11 @@ static void __devexit piix4_remove(struct pci_dev *dev)
piix4_adap_remove(piix4_main_adapter);
piix4_main_adapter = NULL;
}
+
+ if (piix4_aux_adapter) {
+ piix4_adap_remove(piix4_aux_adapter);
+ piix4_aux_adapter = NULL;
+ }
}
static struct pci_driver piix4_driver = {
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists