[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20120614045125.GA30257@linux.vnet.ibm.com>
Date: Wed, 13 Jun 2012 21:51:25 -0700
From: "Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
To: Thomas Gleixner <tglx@...utronix.de>
Cc: LKML <linux-kernel@...r.kernel.org>,
Peter Zijlstra <peterz@...radead.org>,
Ingo Molnar <mingo@...nel.org>,
"Srivatsa S. Bhat" <srivatsa.bhat@...ux.vnet.ibm.com>,
Rusty Russell <rusty@...tcorp.com.au>,
Tejun Heo <tj@...nel.org>
Subject: Re: [RFC patch 2/5] smpboot: Provide infrastructure for percpu
hotplug threads
On Wed, Jun 13, 2012 at 01:47:25PM -0700, Paul E. McKenney wrote:
> On Wed, Jun 13, 2012 at 12:17:45PM -0700, Paul E. McKenney wrote:
> > On Wed, Jun 13, 2012 at 09:02:55PM +0200, Thomas Gleixner wrote:
> > > On Wed, 13 Jun 2012, Paul E. McKenney wrote:
> > > > On Wed, Jun 13, 2012 at 11:00:54AM -0000, Thomas Gleixner wrote:
> > > > > /* Now call notifier in preparation. */
> > > > > cpu_notify(CPU_ONLINE | mod, hcpu);
> > > > > + smpboot_unpark_threads(cpu);
> > > >
> > > > OK, RCU must use the lower-level interfaces, given that one of
> > > > then CPU_ONLINE notifiers might invoke synchronize_rcu().
> > >
> > > We can start the threads before the notifiers. There is no
> > > restriction.
> >
> > Sounds very good in both cases!
>
> Just for reference, here is what I am using.
And here is a buggy first attempt to make RCU use the smpboot interfaces.
Probably still bugs in my adaptation, as it still hangs in the first
attempt to offline a CPU. If I revert the softirq smpboot commit, the
offline still hangs somewhere near the __stop_machine() processing, but
the system continues running otherwise. Will continue debugging tomorrow.
When doing this sort of conversion, renaming the per-CPU variable used
to hold the kthreads' task_struct pointers is highly recommended --
failing to do so cost me substantial confusion. ;-)
Thanx, Paul
------------------------------------------------------------------------
rcu: Use smp_hotplug_thread facility for RCU's per-CPU kthread
Bring RCU into the new-age CPU-hotplug fold by modifying RCU's per-CPU
kthread code to use the new smp_hotplug_thread facility.
Not-signed-off-by: Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
rcutree.c | 4 -
rcutree.h | 2
rcutree_plugin.h | 177 ++++++++-----------------------------------------------
rcutree_trace.c | 3
4 files changed, 27 insertions(+), 159 deletions(-)
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 0da7b88..7813d7d 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -125,7 +125,6 @@ static int rcu_scheduler_fully_active __read_mostly;
*/
static DEFINE_PER_CPU(struct task_struct *, rcu_cpu_kthread_task);
DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
-DEFINE_PER_CPU(int, rcu_cpu_kthread_cpu);
DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
DEFINE_PER_CPU(char, rcu_cpu_has_work);
@@ -1458,7 +1457,6 @@ static void rcu_cleanup_dead_cpu(int cpu, struct rcu_state *rsp)
struct rcu_node *rnp = rdp->mynode; /* Outgoing CPU's rdp & rnp. */
/* Adjust any no-longer-needed kthreads. */
- rcu_stop_cpu_kthread(cpu);
rcu_node_kthread_setaffinity(rnp, -1);
/* Remove the dead CPU from the bitmasks in the rcu_node hierarchy. */
@@ -2514,11 +2512,9 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
case CPU_ONLINE:
case CPU_DOWN_FAILED:
rcu_node_kthread_setaffinity(rnp, -1);
- rcu_cpu_kthread_setrt(cpu, 1);
break;
case CPU_DOWN_PREPARE:
rcu_node_kthread_setaffinity(rnp, cpu);
- rcu_cpu_kthread_setrt(cpu, 0);
break;
case CPU_DYING:
case CPU_DYING_FROZEN:
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 7f5d138..70883af 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -434,7 +434,6 @@ static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
unsigned long flags);
-static void rcu_stop_cpu_kthread(int cpu);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
static void rcu_print_detail_task_stall(struct rcu_state *rsp);
static int rcu_print_task_stall(struct rcu_node *rnp);
@@ -472,7 +471,6 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
static void invoke_rcu_node_kthread(struct rcu_node *rnp);
static void rcu_yield(void (*f)(unsigned long), unsigned long arg);
#endif /* #ifdef CONFIG_RCU_BOOST */
-static void rcu_cpu_kthread_setrt(int cpu, int to_rt);
static void __cpuinit rcu_prepare_kthreads(int cpu);
static void rcu_prepare_for_idle_init(int cpu);
static void rcu_cleanup_after_idle(int cpu);
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 2411000..f789341 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -25,6 +25,7 @@
*/
#include <linux/delay.h>
+#include <linux/smpboot.h>
#define RCU_KTHREAD_PRIO 1
@@ -1449,25 +1450,6 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
return 0;
}
-#ifdef CONFIG_HOTPLUG_CPU
-
-/*
- * Stop the RCU's per-CPU kthread when its CPU goes offline,.
- */
-static void rcu_stop_cpu_kthread(int cpu)
-{
- struct task_struct *t;
-
- /* Stop the CPU's kthread. */
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (t != NULL) {
- per_cpu(rcu_cpu_kthread_task, cpu) = NULL;
- kthread_stop(t);
- }
-}
-
-#endif /* #ifdef CONFIG_HOTPLUG_CPU */
-
static void rcu_kthread_do_work(void)
{
rcu_do_batch(&rcu_sched_state, &__get_cpu_var(rcu_sched_data));
@@ -1490,30 +1472,6 @@ static void invoke_rcu_node_kthread(struct rcu_node *rnp)
}
/*
- * Set the specified CPU's kthread to run RT or not, as specified by
- * the to_rt argument. The CPU-hotplug locks are held, so the task
- * is not going away.
- */
-static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
-{
- int policy;
- struct sched_param sp;
- struct task_struct *t;
-
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (t == NULL)
- return;
- if (to_rt) {
- policy = SCHED_FIFO;
- sp.sched_priority = RCU_KTHREAD_PRIO;
- } else {
- policy = SCHED_NORMAL;
- sp.sched_priority = 0;
- }
- sched_setscheduler_nocheck(t, policy, &sp);
-}
-
-/*
* Timer handler to initiate the waking up of per-CPU kthreads that
* have yielded the CPU due to excess numbers of RCU callbacks.
* We wake up the per-rcu_node kthread, which in turn will wake up
@@ -1553,63 +1511,35 @@ static void rcu_yield(void (*f)(unsigned long), unsigned long arg)
}
/*
- * Handle cases where the rcu_cpu_kthread() ends up on the wrong CPU.
- * This can happen while the corresponding CPU is either coming online
- * or going offline. We cannot wait until the CPU is fully online
- * before starting the kthread, because the various notifier functions
- * can wait for RCU grace periods. So we park rcu_cpu_kthread() until
- * the corresponding CPU is online.
- *
- * Return 1 if the kthread needs to stop, 0 otherwise.
- *
- * Caller must disable bh. This function can momentarily enable it.
- */
-static int rcu_cpu_kthread_should_stop(int cpu)
-{
- while (cpu_is_offline(cpu) ||
- !cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)) ||
- smp_processor_id() != cpu) {
- if (kthread_should_stop())
- return 1;
- per_cpu(rcu_cpu_kthread_status, cpu) = RCU_KTHREAD_OFFCPU;
- per_cpu(rcu_cpu_kthread_cpu, cpu) = raw_smp_processor_id();
- local_bh_enable();
- schedule_timeout_uninterruptible(1);
- if (!cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)))
- set_cpus_allowed_ptr(current, cpumask_of(cpu));
- local_bh_disable();
- }
- per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
- return 0;
-}
-
-/*
* Per-CPU kernel thread that invokes RCU callbacks. This replaces the
* RCU softirq used in flavors and configurations of RCU that do not
* support RCU priority boosting.
*/
-static int rcu_cpu_kthread(void *arg)
+static int rcu_cpu_kthread(void *cookie)
{
- int cpu = (int)(long)arg;
unsigned long flags;
+ struct sched_param sp;
int spincnt = 0;
- unsigned int *statusp = &per_cpu(rcu_cpu_kthread_status, cpu);
+ unsigned int *statusp = &__get_cpu_var(rcu_cpu_kthread_status);
char work;
- char *workp = &per_cpu(rcu_cpu_has_work, cpu);
+ char *workp = &__get_cpu_var(rcu_cpu_has_work);
- trace_rcu_utilization("Start CPU kthread@...t");
+ trace_rcu_utilization("Start CPU kthread@...ark");
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
for (;;) {
*statusp = RCU_KTHREAD_WAITING;
trace_rcu_utilization("End CPU kthread@..._wait");
- rcu_wait(*workp != 0 || kthread_should_stop());
+ rcu_wait(*workp != 0 ||
+ smpboot_thread_check_parking(cookie));
trace_rcu_utilization("Start CPU kthread@..._wait");
local_bh_disable();
- if (rcu_cpu_kthread_should_stop(cpu)) {
+ if (smpboot_thread_check_parking(cookie)) {
local_bh_enable();
break;
}
*statusp = RCU_KTHREAD_RUNNING;
- per_cpu(rcu_cpu_kthread_loops, cpu)++;
+ this_cpu_inc(rcu_cpu_kthread_loops);
local_irq_save(flags);
work = *workp;
*workp = 0;
@@ -1624,59 +1554,14 @@ static int rcu_cpu_kthread(void *arg)
if (spincnt > 10) {
*statusp = RCU_KTHREAD_YIELDING;
trace_rcu_utilization("End CPU kthread@..._yield");
- rcu_yield(rcu_cpu_kthread_timer, (unsigned long)cpu);
+ rcu_yield(rcu_cpu_kthread_timer,
+ smp_processor_id());
trace_rcu_utilization("Start CPU kthread@..._yield");
spincnt = 0;
}
}
*statusp = RCU_KTHREAD_STOPPED;
- trace_rcu_utilization("End CPU kthread@...m");
- return 0;
-}
-
-/*
- * Spawn a per-CPU kthread, setting up affinity and priority.
- * Because the CPU hotplug lock is held, no other CPU will be attempting
- * to manipulate rcu_cpu_kthread_task. There might be another CPU
- * attempting to access it during boot, but the locking in kthread_bind()
- * will enforce sufficient ordering.
- *
- * Please note that we cannot simply refuse to wake up the per-CPU
- * kthread because kthreads are created in TASK_UNINTERRUPTIBLE state,
- * which can result in softlockup complaints if the task ends up being
- * idle for more than a couple of minutes.
- *
- * However, please note also that we cannot bind the per-CPU kthread to its
- * CPU until that CPU is fully online. We also cannot wait until the
- * CPU is fully online before we create its per-CPU kthread, as this would
- * deadlock the system when CPU notifiers tried waiting for grace
- * periods. So we bind the per-CPU kthread to its CPU only if the CPU
- * is online. If its CPU is not yet fully online, then the code in
- * rcu_cpu_kthread() will wait until it is fully online, and then do
- * the binding.
- */
-static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
-{
- struct sched_param sp;
- struct task_struct *t;
-
- if (!rcu_scheduler_fully_active ||
- per_cpu(rcu_cpu_kthread_task, cpu) != NULL)
- return 0;
- t = kthread_create_on_node(rcu_cpu_kthread,
- (void *)(long)cpu,
- cpu_to_node(cpu),
- "rcuc/%d", cpu);
- if (IS_ERR(t))
- return PTR_ERR(t);
- if (cpu_online(cpu))
- kthread_bind(t, cpu);
- per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
- WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
- sp.sched_priority = RCU_KTHREAD_PRIO;
- sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
- per_cpu(rcu_cpu_kthread_task, cpu) = t;
- wake_up_process(t); /* Get to TASK_INTERRUPTIBLE quickly. */
+ trace_rcu_utilization("End CPU kthread@...k");
return 0;
}
@@ -1788,6 +1673,12 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
}
+static struct smp_hotplug_thread rcu_cpu_thread_spec = {
+ .store = &rcu_cpu_kthread_task,
+ .thread_fn = rcu_cpu_kthread,
+ .thread_comm = "rcuc/%u",
+};
+
/*
* Spawn all kthreads -- called as soon as the scheduler is running.
*/
@@ -1797,11 +1688,9 @@ static int __init rcu_spawn_kthreads(void)
struct rcu_node *rnp;
rcu_scheduler_fully_active = 1;
- for_each_possible_cpu(cpu) {
+ BUG_ON(smpboot_register_percpu_thread(&rcu_cpu_thread_spec));
+ for_each_possible_cpu(cpu)
per_cpu(rcu_cpu_has_work, cpu) = 0;
- if (cpu_online(cpu))
- (void)rcu_spawn_one_cpu_kthread(cpu);
- }
rnp = rcu_get_root(rcu_state);
(void)rcu_spawn_one_node_kthread(rcu_state, rnp);
if (NUM_RCU_NODES > 1) {
@@ -1818,11 +1707,9 @@ static void __cpuinit rcu_prepare_kthreads(int cpu)
struct rcu_node *rnp = rdp->mynode;
/* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */
- if (rcu_scheduler_fully_active) {
- (void)rcu_spawn_one_cpu_kthread(cpu);
- if (rnp->node_kthread_task == NULL)
- (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
- }
+ if (rcu_scheduler_fully_active &&
+ rnp->node_kthread_task == NULL)
+ (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
}
#else /* #ifdef CONFIG_RCU_BOOST */
@@ -1846,22 +1733,10 @@ static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
{
}
-#ifdef CONFIG_HOTPLUG_CPU
-
-static void rcu_stop_cpu_kthread(int cpu)
-{
-}
-
-#endif /* #ifdef CONFIG_HOTPLUG_CPU */
-
static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
{
}
-static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
-{
-}
-
static int __init rcu_scheduler_really_started(void)
{
rcu_scheduler_fully_active = 1;
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index d4bc16d..6b4c76b 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -83,11 +83,10 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
rdp->nxttail[RCU_WAIT_TAIL]],
".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]]);
#ifdef CONFIG_RCU_BOOST
- seq_printf(m, " kt=%d/%c/%d ktl=%x",
+ seq_printf(m, " kt=%d/%c ktl=%x",
per_cpu(rcu_cpu_has_work, rdp->cpu),
convert_kthread_status(per_cpu(rcu_cpu_kthread_status,
rdp->cpu)),
- per_cpu(rcu_cpu_kthread_cpu, rdp->cpu),
per_cpu(rcu_cpu_kthread_loops, rdp->cpu) & 0xffff);
#endif /* #ifdef CONFIG_RCU_BOOST */
seq_printf(m, " b=%ld", rdp->blimit);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists