Initializing cgroup subsys cpu Linux version 3.3.0.bisect25+ (root@wensxps) (gcc version 4.6.3 (Debian 4.6.3-1) ) #72 SMP Thu Jun 14 13:18:20 BST 2012 Command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0.bisect25+ root=UUID=39c0ed04-fbf1-43b0-8e7a-09e446a8bea6 ro KERNEL supported cpus: Intel GenuineIntel Disabled fast string operations BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bac8f000 (usable) BIOS-e820: 00000000bac8f000 - 00000000bade2000 (reserved) BIOS-e820: 00000000bade2000 - 00000000badea000 (ACPI NVS) BIOS-e820: 00000000badea000 - 00000000baf1f000 (reserved) BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS) BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data) BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable) BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000023e9ff000 (usable) BIOS-e820: 000000023e9ff000 - 000000023fe00000 (reserved) NX (Execute Disable) protection: active DMI 2.6 present. DMI: Dell Inc. Dell System XPS L702X/0XN71K, BIOS A17 02/22/2012 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x23e9ff max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0FFC00000 mask FFFC00000 write-protect 1 base 000000000 mask F80000000 write-back 2 base 080000000 mask FC0000000 write-back 3 base 0BC000000 mask FFC000000 uncachable 4 base 0BB000000 mask FFF000000 uncachable 5 base 100000000 mask F00000000 write-back 6 base 200000000 mask FC0000000 write-back 7 base 23FE00000 mask FFFE00000 uncachable 8 disabled 9 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbb000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff880000098000] 98000 size 20480 init_memory_mapping: 0000000000000000-00000000bb000000 0000000000 - 00bb000000 page 2M kernel direct mapping tables up to bb000000 @ 1fffc000-20000000 init_memory_mapping: 0000000100000000-000000023e9ff000 0100000000 - 023e800000 page 2M 023e800000 - 023e9ff000 page 4k kernel direct mapping tables up to 23e9ff000 @ bac84000-bac8f000 RAMDISK: 37adc000 - 37d66000 ACPI: RSDP 00000000000f00e0 00024 (v02 DELL ) ACPI: XSDT 00000000baffe120 0008C (v01 DELL QA09 00000002 LOHR 00000002) ACPI: FACP 00000000bafef000 000F4 (v03 DELL QA09 00000002 PTL 00000002) ACPI: DSDT 00000000baff2000 09178 (v02 DELL SNB-CPT 00000000 INTL 20061109) ACPI: FACS 00000000baf40000 00040 ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001) ACPI: SSDT 00000000baffc000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109) ACPI: ASF! 00000000baff1000 000A5 (v32 DELL QA09 00000002 PTL 00000002) ACPI: HPET 00000000bafee000 00038 (v01 DELL QA09 00000002 PTL 00000002) ACPI: APIC 00000000bafed000 00098 (v01 DELL QA09 00000002 PTL 00000002) ACPI: MCFG 00000000bafec000 0003C (v01 DELL QA09 00000002 PTL 00000002) ACPI: SSDT 00000000bafea000 012AD (v01 NvORef NvOptTbl 00001000 INTL 20061109) ACPI: SSDT 00000000bafe9000 0094E (v01 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 00000000bafe8000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) ACPI: UEFI 00000000bafe7000 0003E (v01 DELL QA09 00000002 PTL 00000002) ACPI: UEFI 00000000bafe6000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) ACPI: UEFI 00000000bafe5000 0026A (v01 DELL QA09 00000002 PTL 00000002) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000023e9ff000 Initmem setup node 0 0000000000000000-000000023e9ff000 NODE_DATA [000000023e9fa000 - 000000023e9fefff] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236000000-ffff88023cffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0023e9ff Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x000bac8f 0: 0x000bafff -> 0x000bb000 0: 0x00100000 -> 0x0023e9ff On node 0 totalpages: 2070044 DMA zone: 56 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3920 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 746696 pages, LIFO batch:31 Normal zone: 17843 pages used for memmap Normal zone: 1287244 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000bac8f000 - 00000000bade2000 PM: Registered nosave memory: 00000000bade2000 - 00000000badea000 PM: Registered nosave memory: 00000000badea000 - 00000000baf1f000 PM: Registered nosave memory: 00000000baf1f000 - 00000000baf9f000 PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000 PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000 PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000) setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff88023e600000 s77440 r8192 d20864 u262144 pcpu-alloc: s77440 r8192 d20864 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037860 Policy zone: Normal Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0.bisect25+ root=UUID=39c0ed04-fbf1-43b0-8e7a-09e446a8bea6 ro PID hash table entries: 4096 (order: 3, 32768 bytes) xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 Memory: 8085740k/9414652k available (4110k kernel code, 1134476k absent, 194436k reserved, 4582k data, 468k init) Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. NR_IRQS:33024 nr_irqs:744 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2194.995 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.99 BogoMIPS (lpj=8779980) pid_max: default: 32768 minimum: 301 Security Framework initialized Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) mce: CPU supports 9 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20120111 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07 Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. PEBS disabled due to CPU errata. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 98000 Disabled fast string operations CPU1: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. #2 smpboot cpu 2: start_ip = 98000 Disabled fast string operations CPU2: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. #3 smpboot cpu 3: start_ip = 98000 Disabled fast string operations CPU3: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. #4 smpboot cpu 4: start_ip = 98000 Disabled fast string operations CPU4: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. #5 smpboot cpu 5: start_ip = 98000 Disabled fast string operations CPU5: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. #6 smpboot cpu 6: start_ip = 98000 Disabled fast string operations CPU6: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. #7 Ok. smpboot cpu 7: start_ip = 98000 Disabled fast string operations CPU7: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. Brought up 8 CPUs Total of 8 processors activated (35119.92 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region at bade2000 (32768 bytes) PM: Registering ACPI NVS region at baf1f000 (524288 bytes) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 00000000baf10718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI: SSDT 00000000baf11a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: SSDT 00000000baf0fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: [8086:0116] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xf2400000-0xf27fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 pci 0000:00:16.0: reg 10: [mem 0xf3c05000-0xf3c0500f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 pci 0000:00:1a.0: reg 10: [mem 0xf3c0a000-0xf3c0a3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xf3c00000-0xf3c03fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 pci 0000:00:1d.0: reg 10: [mem 0xf3c09000-0xf3c093ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601 pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f] pci 0000:00:1f.2: reg 24: [mem 0xf3c08000-0xf3c087ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0xf3c04000-0xf3c040ff 64bit] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] pci 0000:01:00.0: [10de:124d] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf1ffffff] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd3ffffff 64bit pref] pci 0000:01:00.0: reg 24: [io 0x4000-0x407f] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:03:00.0: [8086:0091] type 0 class 0x000280 pci 0000:03:00.0: reg 10: [mem 0xf3b00000-0xf3b01fff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03 pci 0000:04:00.0: reg 10: [mem 0xf3a00000-0xf3a01fff 64bit] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PCI bridge to [bus 04-04] pci 0000:00:1c.3: bridge window [mem 0xf3a00000-0xf3afffff] pci 0000:00:1c.4: PCI bridge to [bus 05-09] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xf3100000-0xf39fffff] pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff 64bit pref] pci 0000:0a:00.0: [10ec:8168] type 0 class 0x000200 pci 0000:0a:00.0: reg 10: [io 0x2000-0x20ff] pci 0000:0a:00.0: reg 18: [mem 0xf3004000-0xf3004fff 64bit pref] pci 0000:0a:00.0: reg 20: [mem 0xf3000000-0xf3003fff 64bit pref] pci 0000:0a:00.0: supports D1 D2 pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf30fffff 64bit pref] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 1f 1f pci0000:00: Requesting ACPI _OSC control (0x1d) \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1d pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 *6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 vgaarb: no bridge control possible 0000:00:02.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009d800 - 000000000009ffff reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff reserve RAM buffer: 00000000bb000000 - 00000000bbffffff reserve RAM buffer: 000000023e9ff000 - 000000023fffffff hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-3e] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x000f0000-0x000fffff window] pnp 00:00: [mem 0xbfa00000-0xfeafffff window] pnp 00:00: [mem 0xfed40000-0xfed44fff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [io 0x0000-0x001f] pnp 00:01: [io 0x0081-0x0091] pnp 00:01: [io 0x0093-0x009f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: [dma 4] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [mem 0xfed00000-0xfed003ff] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:03: [io 0x00f0] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x002e-0x002f] pnp 00:04: [io 0x004e-0x004f] pnp 00:04: [io 0x0061] pnp 00:04: [io 0x0063] pnp 00:04: [io 0x0065] pnp 00:04: [io 0x0067] pnp 00:04: [io 0x0068] pnp 00:04: [io 0x006c] pnp 00:04: [io 0x0070] pnp 00:04: [io 0x0080] pnp 00:04: [io 0x0092] pnp 00:04: [io 0x00b2-0x00b3] pnp 00:04: [io 0x0680-0x069f] pnp 00:04: [io 0x1000-0x1003] pnp 00:04: [io 0x1004-0x1013] pnp 00:04: [io 0xffff] pnp 00:04: [io 0x0400-0x0453] pnp 00:04: [io 0x0458-0x047f] pnp 00:04: [io 0x0500-0x057f] pnp 00:04: [io 0x164e-0x164f] system 00:04: [io 0x0680-0x069f] has been reserved system 00:04: [io 0x1000-0x1003] has been reserved system 00:04: [io 0x1004-0x1013] has been reserved system 00:04: [io 0xffff] has been reserved system 00:04: [io 0x0400-0x0453] has been reserved system 00:04: [io 0x0458-0x047f] has been reserved system 00:04: [io 0x0500-0x057f] has been reserved system 00:04: [io 0x164e-0x164f] has been reserved system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:05: [io 0x0070-0x0077] pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x0454-0x0457] system 00:06: [io 0x0454-0x0457] has been reserved system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs DLL0571 PNP0f13 (active) pnp 00:09: [mem 0xfed1c000-0xfed1ffff] pnp 00:09: [mem 0xfed10000-0xfed17fff] pnp 00:09: [mem 0xfed18000-0xfed18fff] pnp 00:09: [mem 0xfed19000-0xfed19fff] pnp 00:09: [mem 0xf8000000-0xfbffffff] pnp 00:09: [mem 0xfed20000-0xfed3ffff] pnp 00:09: [mem 0xfed90000-0xfed93fff] pnp 00:09: [mem 0xfed45000-0xfed8ffff] pnp 00:09: [mem 0xff000000-0xffffffff] pnp 00:09: [mem 0xfee00000-0xfeefffff] pnp 00:09: [mem 0xfffff000-0xffffffff] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:09: [mem 0xff000000-0xffffffff] could not be reserved system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [irq 20] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] PCI: max bus depth: 1 pci_try_num: 2 pci 0000:01:00.0: BAR 6: assigned [mem 0xf2000000-0xf207ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff] pci 0000:00:1c.3: PCI bridge to [bus 04-04] pci 0000:00:1c.3: bridge window [mem 0xf3a00000-0xf3afffff] pci 0000:00:1c.4: PCI bridge to [bus 05-09] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xf3100000-0xf39fffff] pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf30fffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf20fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd3ffffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xf3b00000-0xf3bfffff] pci_bus 0000:04: resource 1 [mem 0xf3a00000-0xf3afffff] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] pci_bus 0000:05: resource 1 [mem 0xf3100000-0xf39fffff] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf2ffffff 64bit pref] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff] pci_bus 0000:0a: resource 2 [mem 0xf3000000-0xf30fffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 2600k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800b6c84000 - ffff8800bac84000 software IO TLB at phys 0xb6c84000 - 0xbac84000 HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 15797 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 40 for MSI/MSI-X intel_idle: MWAIT substates: 0x21120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] GHES: HEST is not enabled! Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 65536K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 41 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 fbcon: inteldrmfb (fb0) is primary device Refined TSC clocksource calibration: 2195.012 MHz. Switching to clocksource tsc Console: switching to colour frame buffer device 160x64 fb0: inteldrmfb frame buffer device drm: registered panic notifier [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS acpi device:2f: registered as cooling_device0 video: probe of LNXVIDEO:00 failed with error -5 acpi device:31: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 Registering the dns_resolver key type PM: Hibernation image not present or could not be loaded. registered taskstats version 1 rtc_cmos 00:05: setting system clock to 2012-06-14 12:20:52 UTC (1339676452) Initializing network drop monitor service Freeing unused kernel memory: 468k freed Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 2012k freed Freeing unused kernel memory: 744k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 udevd[75]: starting version 175 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (54 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (54 C) SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: irq 42 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08100 irq 42 ata2: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08180 irq 42 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08300 irq 42 ata6: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08380 irq 42 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata2.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATAPI: HL-DT-ST DVD+-RW GT50N, A101, max UDMA/133 ata6.00: configured for UDMA/133 scsi 5:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT50N A101 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] 4096-byte physical blocks sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk PM: Starting manual resume from disk PM: Hibernation image partition 8:6 present PM: Looking for hibernation image. PM: Image not found (code -22) PM: Hibernation image not present or could not be loaded. EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) udevd[323]: starting version 175 ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120111/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver wmi: Mapper loaded iTCO_vendor_support: vendor-support=0 mei: module is from the staging directory, the quality is unknown, you have been warned. dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) mei 0000:00:16.0: setting latency timer to 64 mei 0000:00:16.0: irq 43 for MSI/MSI-X input: PC Speaker as /devices/platform/pcspkr/input/input6 ACPI: Battery Slot [BAT0] (battery present) r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:0a:00.0: irq 44 for MSI/MSI-X r8169 0000:0a:00.0: eth0: RTL8168e/8111e at 0xffffc900057ba000, 84:8f:69:c4:09:63, XID 0c200000 IRQ 44 r8169 0000:0a:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb input: Dell WMI hotkeys as /devices/virtual/input/input7 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf3c0a000 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.3.0.bisect25+ ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf3c09000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.3.0.bisect25+ ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found ACPI: AC Adapter [ADP0] (on-line) hub 2-0:1.0: 2 ports detected xhci_hcd 0000:04:00.0: xHCI Host Controller xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 xhci_hcd 0000:04:00.0: irq 19, io mem 0xf3a00000 xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: xHCI Host Controller usb usb3: Manufacturer: Linux 3.3.0.bisect25+ xhci_hcd usb usb3: SerialNumber: 0000:04:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xhci_hcd 0000:04:00.0: xHCI Host Controller xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: xHCI Host Controller usb usb4: Manufacturer: Linux 3.3.0.bisect25+ xhci_hcd usb usb4: SerialNumber: 0000:04:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X usb 1-1: new high-speed USB device number 2 using ehci_hcd sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 cfg80211: Calling CRDA to update world regulatory domain Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: Copyright(c) 2003-2011 Intel Corporation iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057b4000 iwlwifi 0000:03:00.0: HW Revision ID = 0x34 iwlwifi 0000:03:00.0: irq 54 for MSI/MSI-X iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6 iwlwifi 0000:03:00.0: Device SKU: 0x1F0 iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3 iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels usb 1-1: New USB device found, idVendor=8087, idProduct=0024 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high-speed USB device number 2 using ehci_hcd psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x8a0400 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 usb 2-1: New USB device found, idVendor=8087, idProduct=0024 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 Registered led device: phy0-led ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' usb 3-1: new low-speed USB device number 2 using xhci_hcd hda_codec: ALC665: SKU not ready 0x598301f0 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 usb 3-1: New USB device found, idVendor=045e, idProduct=0040 usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 usb 3-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM) usb 3-1: Manufacturer: Microsoft usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 usb 3-2: new low-speed USB device number 3 using xhci_hcd usb 3-2: New USB device found, idVendor=0a81, idProduct=0205 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: PS2 to USB Converter usb 3-2: Manufacturer: CHESEN usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input14 generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:04:00.0-1/input0 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2:1.0/input/input15 generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:04:00.0-2/input0 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2:1.1/input/input16 generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:04:00.0-2/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 1-1.4: new high-speed USB device number 3 using ehci_hcd usb 1-1.4: New USB device found, idVendor=0408, idProduct=2fb1 usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM usb 1-1.4: Manufacturer: CN07CN2C7866421A1605A00 Linux media interface: v0.10 usb 2-1.5: new full-speed USB device number 3 using ehci_hcd cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0408:2fb1) uvcvideo: No streaming interface found for terminal 6. input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usbcore: registered new interface driver btusb Adding 15007740k swap on /dev/sda6. Priority:-1 extents:1 across:15007740k EXT4-fs (sda5): re-mounted. Opts: (null) EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro loop: module loaded fuse init (API version 7.18) iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 ADDRCONF(NETDEV_UP): wlan0: link is not ready input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18 r8169 0000:0a:00.0: eth0: link down r8169 0000:0a:00.0: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, +vsync) Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast r8169 0000:0a:00.0: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23 microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23 microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23 microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23 microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x23 microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x23 microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x23 microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x23 microcode: Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated to revision 0x28, date = 2012-04-24 microcode: CPU1 updated to revision 0x28, date = 2012-04-24 microcode: CPU2 updated to revision 0x28, date = 2012-04-24 microcode: CPU3 updated to revision 0x28, date = 2012-04-24 microcode: CPU4 updated to revision 0x28, date = 2012-04-24 microcode: CPU5 updated to revision 0x28, date = 2012-04-24 microcode: CPU6 updated to revision 0x28, date = 2012-04-24 microcode: CPU7 updated to revision 0x28, date = 2012-04-24 eth0: no IPv6 routers present [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync) wlan0: authenticate with d8:c7:c8:ad:e3:a9 (try 1) wlan0: authenticate with d8:c7:c8:ad:e3:a9 (try 2) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a9 (try 1) wlan0: associate with d8:c7:c8:ad:e3:a9 (try 2) wlan0: RX AssocResp from d8:c7:c8:ad:e3:a9 (capab=0x401 status=0 aid=2) wlan0: associated wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 1 wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 2 wlan0: Wrong control channel in association response: configured center-freq: 5180 hti-cfreq: 5540 hti->control_chan: 108 band: 1. Disabling HT. ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 3 wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 2 wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 1 wlan0: moving STA d8:c7:c8:ad:e3:a9 to state 0 cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 1 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 2 wlan0: Wrong control channel in association response: configured center-freq: 2412 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT. wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 3 wlan0: no IPv6 routers present [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, +vsync) wlan0: deauthenticating from d8:c7:c8:ad:e3:a1 by local choice (reason=3) wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 2 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 1 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 0 cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync) wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 1 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 2 wlan0: Wrong control channel in association response: configured center-freq: 2412 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT. wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 3 wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 2 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 1 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 0 wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=3) wlan0: associated wlan0: moving STA 00:24:6c:82:b2:f1 to state 1 wlan0: moving STA 00:24:6c:82:b2:f1 to state 2 wlan0: Wrong control channel in association response: configured center-freq: 2437 hti-cfreq: 2412 hti->control_chan: 1 band: 0. Disabling HT. wlan0: moving STA 00:24:6c:82:b2:f1 to state 3 wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: moving STA 00:24:6c:82:b2:f1 to state 2 wlan0: moving STA 00:24:6c:82:b2:f1 to state 1 wlan0: moving STA 00:24:6c:82:b2:f1 to state 0 wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 1 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 2 wlan0: Wrong control channel in association response: configured center-freq: 2412 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT. wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 3 iwlwifi 0000:03:00.0: Microcode SW error detected. Restarting 0x2000000. iwlwifi 0000:03:00.0: Loaded firmware version: 18.168.6.1 iwlwifi 0000:03:00.0: Start IWL Error Log Dump: iwlwifi 0000:03:00.0: Status: 0x000412E5, count: 6 iwlwifi 0000:03:00.0: 0x00002076 | ADVANCED_SYSASSERT iwlwifi 0000:03:00.0: 0x00009C14 | uPc iwlwifi 0000:03:00.0: 0x00009BCE | branchlink1 iwlwifi 0000:03:00.0: 0x00009BCE | branchlink2 iwlwifi 0000:03:00.0: 0x0000DBEA | interruptlink1 iwlwifi 0000:03:00.0: 0x00000000 | interruptlink2 iwlwifi 0000:03:00.0: 0x00000000 | data1 iwlwifi 0000:03:00.0: 0x00000200 | data2 iwlwifi 0000:03:00.0: 0x00000609 | line iwlwifi 0000:03:00.0: 0x000141F5 | beacon time iwlwifi 0000:03:00.0: 0x00004E0A | tsf low iwlwifi 0000:03:00.0: 0x00000000 | tsf hi iwlwifi 0000:03:00.0: 0x00000000 | time gp1 iwlwifi 0000:03:00.0: 0x3FD5DF46 | time gp2 iwlwifi 0000:03:00.0: 0x00000000 | time gp3 iwlwifi 0000:03:00.0: 0x754312A8 | uCode version iwlwifi 0000:03:00.0: 0x000000B0 | hw version iwlwifi 0000:03:00.0: 0x00480303 | board version iwlwifi 0000:03:00.0: 0x047D004E | hcmd iwlwifi 0000:03:00.0: 0xAF963080 | isr0 iwlwifi 0000:03:00.0: 0x11C9F800 | isr1 iwlwifi 0000:03:00.0: 0x00000E02 | isr2 iwlwifi 0000:03:00.0: 0x8142C8C2 | isr3 iwlwifi 0000:03:00.0: 0x00000000 | isr4 iwlwifi 0000:03:00.0: 0x01800112 | isr_pref iwlwifi 0000:03:00.0: 0x000260A4 | wait_event iwlwifi 0000:03:00.0: 0x000000D4 | l2p_control iwlwifi 0000:03:00.0: 0x00000000 | l2p_duration iwlwifi 0000:03:00.0: 0x00000007 | l2p_mhvalid iwlwifi 0000:03:00.0: 0x00101040 | l2p_addr_match iwlwifi 0000:03:00.0: 0x00000005 | lmpm_pmg_sel iwlwifi 0000:03:00.0: 0x13011136 | timestamp iwlwifi 0000:03:00.0: 0x0000B0C0 | flow_handler iwlwifi 0000:03:00.0: CSR values: iwlwifi 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) iwlwifi 0000:03:00.0: CSR_HW_IF_CONFIG_REG: 0X00480303 iwlwifi 0000:03:00.0: CSR_INT_COALESCING: 0X00000040 iwlwifi 0000:03:00.0: CSR_INT: 0X00000000 iwlwifi 0000:03:00.0: CSR_INT_MASK: 0X00000000 iwlwifi 0000:03:00.0: CSR_FH_INT_STATUS: 0X00000000 iwlwifi 0000:03:00.0: CSR_GPIO_IN: 0X00000038 iwlwifi 0000:03:00.0: CSR_RESET: 0X00000000 iwlwifi 0000:03:00.0: CSR_GP_CNTRL: 0X080403c5 iwlwifi 0000:03:00.0: CSR_HW_REV: 0X000000b0 iwlwifi 0000:03:00.0: CSR_EEPROM_REG: 0Xf3f80ffd iwlwifi 0000:03:00.0: CSR_EEPROM_GP: 0X90000801 iwlwifi 0000:03:00.0: CSR_OTP_GP_REG: 0X00030001 iwlwifi 0000:03:00.0: CSR_GIO_REG: 0X00080042 iwlwifi 0000:03:00.0: CSR_GP_UCODE_REG: 0X0000bbfe iwlwifi 0000:03:00.0: CSR_GP_DRIVER_REG: 0X00000000 iwlwifi 0000:03:00.0: CSR_UCODE_DRV_GP1: 0X00000000 iwlwifi 0000:03:00.0: CSR_UCODE_DRV_GP2: 0X00000000 iwlwifi 0000:03:00.0: CSR_LED_REG: 0X00000058 iwlwifi 0000:03:00.0: CSR_DRAM_INT_TBL_REG: 0X88234ac3 iwlwifi 0000:03:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 iwlwifi 0000:03:00.0: CSR_ANA_PLL_CFG: 0X00000000 iwlwifi 0000:03:00.0: CSR_HW_REV_WA_REG: 0X0001001a iwlwifi 0000:03:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 iwlwifi 0000:03:00.0: FH register values: iwlwifi 0000:03:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X230c1500 iwlwifi 0000:03:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X02325f30 iwlwifi 0000:03:00.0: FH_RSCSR_CHNL0_WPTR: 0X000000b0 iwlwifi 0000:03:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 iwlwifi 0000:03:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc iwlwifi 0000:03:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 iwlwifi 0000:03:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 iwlwifi 0000:03:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 iwlwifi 0000:03:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 iwlwifi 0000:03:00.0: Start IWL Event Log Dump: nothing in log iwlwifi 0000:03:00.0: Error: Response NULL in 'REPLY_ADD_STA' iwlwifi 0000:03:00.0: Adding station d8:c7:c8:ad:e3:a1 failed. iwlwifi 0000:03:00.0: Command REPLY_ADD_STA failed: FW Error iwlwifi 0000:03:00.0: Adding station ff:ff:ff:ff:ff:ff failed. iwlwifi 0000:03:00.0: Command REPLY_RXON_TIMING failed: FW Error iwlwifi 0000:03:00.0: Failed to send timing (-5)! wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) ieee80211 phy0: Hardware restart was requested iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 wlan0: authenticated wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 2 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 1 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 0 wlan0: waiting for beacon from 00:24:6c:82:b2:f1 wlan0: beacon received wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=3) wlan0: associated wlan0: moving STA 00:24:6c:82:b2:f1 to state 1 wlan0: moving STA 00:24:6c:82:b2:f1 to state 2 wlan0: Wrong control channel in association response: configured center-freq: 2437 hti-cfreq: 2412 hti->control_chan: 1 band: 0. Disabling HT. wlan0: moving STA 00:24:6c:82:b2:f1 to state 3 wlan0: authenticate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: authenticated wlan0: moving STA 00:24:6c:82:b2:f1 to state 2 wlan0: moving STA 00:24:6c:82:b2:f1 to state 1 wlan0: moving STA 00:24:6c:82:b2:f1 to state 0 wlan0: waiting for beacon from d8:c7:c8:ad:e3:a1 wlan0: beacon received wlan0: associate with d8:c7:c8:ad:e3:a1 (try 1) wlan0: RX ReassocResp from d8:c7:c8:ad:e3:a1 (capab=0x421 status=0 aid=2) wlan0: associated wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 1 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 2 wlan0: Wrong control channel in association response: configured center-freq: 2412 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT. wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 3 wlan0: authenticate with 00:24:6c:82:b2:f1 (try 1) wlan0: authenticated wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 2 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 1 wlan0: moving STA d8:c7:c8:ad:e3:a1 to state 0 wlan0: waiting for beacon from 00:24:6c:82:b2:f1 wlan0: beacon received wlan0: associate with 00:24:6c:82:b2:f1 (try 1) wlan0: RX ReassocResp from 00:24:6c:82:b2:f1 (capab=0x421 status=0 aid=3) wlan0: associated wlan0: moving STA 00:24:6c:82:b2:f1 to state 1 wlan0: moving STA 00:24:6c:82:b2:f1 to state 2 wlan0: Wrong control channel in association response: configured center-freq: 2437 hti-cfreq: 2412 hti->control_chan: 1 band: 0. Disabling HT. wlan0: moving STA 00:24:6c:82:b2:f1 to state 3