lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1339762011-28159-1-git-send-email-linus.walleij@stericsson.com>
Date:	Fri, 15 Jun 2012 14:06:51 +0200
From:	Linus Walleij <linus.walleij@...ricsson.com>
To:	<linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>
Cc:	Stephen Warren <swarren@...dia.com>,
	Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH] pinctrl/nomadik: document Alt-C glitch

From: Linus Walleij <linus.walleij@...aro.org>

This documentation comment existed in an earlier patch set for
GPIO consolidation, so I'm saving it for maintainability of the
code.

Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
 drivers/pinctrl/pinctrl-nomadik.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index e8937e7..3e7e47d 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -1438,7 +1438,27 @@ static int nmk_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
 
 	dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins);
 
-	/* Handle this special glitch on altfunction C */
+	/*
+	 * If we're setting altfunc C by setting both AFSLA and AFSLB to 1,
+	 * we may pass through an undesired state. In this case we take
+	 * some extra care.
+	 *
+	 * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
+	 *  - Save SLPM registers (since we have a shadow register in the
+	 *    nmk_chip we're using that as backup)
+	 *  - Set SLPM=0 for the IOs you want to switch and others to 1
+	 *  - Configure the GPIO registers for the IOs that are being switched
+	 *  - Set IOFORCE=1
+	 *  - Modify the AFLSA/B registers for the IOs that are being switched
+	 *  - Set IOFORCE=0
+	 *  - Restore SLPM registers
+	 *  - Any spurious wake up event during switch sequence to be ignored
+	 *    and cleared
+	 *
+	 * We REALLY need to save ALL slpm registers, because the external
+	 * IOFORCE will switch *all* ports to their sleepmode setting to as
+	 * to avoid glitches. (Not just one port!)
+	 */
 	glitch = (g->altsetting == NMK_GPIO_ALT_C);
 
 	if (glitch) {
-- 
1.7.9.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ