| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1339896869.12833.3.camel@phoenix>
Date: Sun, 17 Jun 2012 09:34:29 +0800
From: Axel Lin <axel.lin@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Kyungmin Park <kyungmin.park@...sung.com>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Liam Girdwood <lrg@...com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>
Subject: [PATCH RFT 2/2] regulator: max8998: Convert to set_voltage_sel and
regulator_map_voltage_linear
Signed-off-by: Axel Lin <axel.lin@...il.com>
---
drivers/regulator/max8998.c | 97 ++++++++++++-------------------------------
1 file changed, 27 insertions(+), 70 deletions(-)
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 105dafc..a1fa266 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -276,41 +276,18 @@ static int max8998_get_voltage_sel(struct regulator_dev *rdev)
return val;
}
-static int max8998_set_voltage_ldo(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
+static int max8998_set_voltage_ldo_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8998->iodev->i2c;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
- const struct voltage_map_desc *desc;
- int ldo = rdev_get_id(rdev);
- int reg, shift = 0, mask, ret, i;
-
- if (ldo >= ARRAY_SIZE(ldo_voltage_map))
- return -EINVAL;
-
- desc = ldo_voltage_map[ldo];
- if (desc == NULL)
- return -EINVAL;
-
- if (max_vol < desc->min || min_vol > desc->max)
- return -EINVAL;
-
- if (min_vol < desc->min)
- min_vol = desc->min;
-
- i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
-
- if (desc->min + desc->step*i > max_vol)
- return -EINVAL;
-
- *selector = i;
+ int reg, shift = 0, mask, ret;
ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
if (ret)
return ret;
- ret = max8998_update_reg(i2c, reg, i<<shift, mask<<shift);
+ ret = max8998_update_reg(i2c, reg, selector<<shift, mask<<shift);
return ret;
}
@@ -326,41 +303,18 @@ static inline void buck2_gpio_set(int gpio, int v)
gpio_set_value(gpio, v & 0x1);
}
-static int max8998_set_voltage_buck(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
+static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct max8998_platform_data *pdata =
dev_get_platdata(max8998->iodev->dev);
struct i2c_client *i2c = max8998->iodev->i2c;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
- const struct voltage_map_desc *desc;
int buck = rdev_get_id(rdev);
int reg, shift = 0, mask, ret;
- int i, j, previous_sel;
+ int j, previous_sel;
static u8 buck1_last_val;
- if (buck >= ARRAY_SIZE(ldo_voltage_map))
- return -EINVAL;
-
- desc = ldo_voltage_map[buck];
-
- if (desc == NULL)
- return -EINVAL;
-
- if (max_vol < desc->min || min_vol > desc->max)
- return -EINVAL;
-
- if (min_vol < desc->min)
- min_vol = desc->min;
-
- i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
-
- if (desc->min + desc->step*i > max_vol)
- return -EINVAL;
-
- *selector = i;
-
ret = max8998_get_voltage_register(rdev, ®, &shift, &mask);
if (ret)
return ret;
@@ -369,19 +323,19 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
/* Check if voltage needs to be changed */
/* if previous_voltage equal new voltage, return */
- if (previous_sel == i) {
+ if (previous_sel == selector) {
dev_dbg(max8998->dev, "No voltage change, old:%d, new:%d\n",
regulator_list_voltage_linear(rdev, previous_sel),
- regulator_list_voltage_linear(rdev, i));
+ regulator_list_voltage_linear(rdev, selector));
return ret;
}
switch (buck) {
case MAX8998_BUCK1:
dev_dbg(max8998->dev,
- "BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n"
+ "BUCK1, selector:%d, buck1_vol1:%d, buck1_vol2:%d\n"
"buck1_vol3:%d, buck1_vol4:%d\n",
- i, max8998->buck1_vol[0], max8998->buck1_vol[1],
+ selector, max8998->buck1_vol[0], max8998->buck1_vol[1],
max8998->buck1_vol[2], max8998->buck1_vol[3]);
if (gpio_is_valid(pdata->buck1_set1) &&
@@ -390,7 +344,7 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
/* check if requested voltage */
/* value is already defined */
for (j = 0; j < ARRAY_SIZE(max8998->buck1_vol); j++) {
- if (max8998->buck1_vol[j] == i) {
+ if (max8998->buck1_vol[j] == selector) {
max8998->buck1_idx = j;
buck1_gpio_set(pdata->buck1_set1,
pdata->buck1_set2, j);
@@ -405,11 +359,11 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
max8998->buck1_idx = (buck1_last_val % 2) + 2;
dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n",
max8998->buck1_idx);
- max8998->buck1_vol[max8998->buck1_idx] = i;
+ max8998->buck1_vol[max8998->buck1_idx] = selector;
ret = max8998_get_voltage_register(rdev, ®,
&shift,
&mask);
- ret = max8998_write_reg(i2c, reg, i);
+ ret = max8998_write_reg(i2c, reg, selector);
buck1_gpio_set(pdata->buck1_set1,
pdata->buck1_set2, max8998->buck1_idx);
buck1_last_val++;
@@ -419,20 +373,20 @@ buck1_exit:
gpio_get_value(pdata->buck1_set2));
break;
} else {
- ret = max8998_write_reg(i2c, reg, i);
+ ret = max8998_write_reg(i2c, reg, selector);
}
break;
case MAX8998_BUCK2:
dev_dbg(max8998->dev,
- "BUCK2, i:%d buck2_vol1:%d, buck2_vol2:%d\n"
- , i, max8998->buck2_vol[0], max8998->buck2_vol[1]);
+ "BUCK2, selector:%d buck2_vol1:%d, buck2_vol2:%d\n",
+ selector, max8998->buck2_vol[0], max8998->buck2_vol[1]);
if (gpio_is_valid(pdata->buck2_set3)) {
/* check if requested voltage */
/* value is already defined */
for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) {
- if (max8998->buck2_vol[j] == i) {
+ if (max8998->buck2_vol[j] == selector) {
max8998->buck2_idx = j;
buck2_gpio_set(pdata->buck2_set3, j);
goto buck2_exit;
@@ -444,20 +398,21 @@ buck1_exit:
max8998_get_voltage_register(rdev,
®, &shift, &mask);
- ret = max8998_write_reg(i2c, reg, i);
- max8998->buck2_vol[max8998->buck2_idx] = i;
+ ret = max8998_write_reg(i2c, reg, selector);
+ max8998->buck2_vol[max8998->buck2_idx] = selector;
buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx);
buck2_exit:
dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name,
gpio_get_value(pdata->buck2_set3));
} else {
- ret = max8998_write_reg(i2c, reg, i);
+ ret = max8998_write_reg(i2c, reg, selector);
}
break;
case MAX8998_BUCK3:
case MAX8998_BUCK4:
- ret = max8998_update_reg(i2c, reg, i<<shift, mask<<shift);
+ ret = max8998_update_reg(i2c, reg, selector<<shift,
+ mask<<shift);
break;
}
@@ -499,22 +454,24 @@ static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev,
static struct regulator_ops max8998_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.is_enabled = max8998_ldo_is_enabled,
.enable = max8998_ldo_enable,
.disable = max8998_ldo_disable,
.get_voltage_sel = max8998_get_voltage_sel,
- .set_voltage = max8998_set_voltage_ldo,
+ .set_voltage_sel = max8998_set_voltage_ldo_sel,
.set_suspend_enable = max8998_ldo_enable,
.set_suspend_disable = max8998_ldo_disable,
};
static struct regulator_ops max8998_buck_ops = {
.list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.is_enabled = max8998_ldo_is_enabled,
.enable = max8998_ldo_enable,
.disable = max8998_ldo_disable,
.get_voltage_sel = max8998_get_voltage_sel,
- .set_voltage = max8998_set_voltage_buck,
+ .set_voltage_sel = max8998_set_voltage_buck_sel,
.set_voltage_time_sel = max8998_set_voltage_buck_time_sel,
.set_suspend_enable = max8998_ldo_enable,
.set_suspend_disable = max8998_ldo_disable,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists