lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1340035678-2195-1-git-send-email-saranya.gopal@intel.com>
Date:	Mon, 18 Jun 2012 21:37:58 +0530
From:	Saranya Gopal <saranya.gopal@...el.com>
To:	cbou@...l.ru, dwmw2@...radead.org
Cc:	linux-kernel@...r.kernel.org,
	Saranya Gopal <saranya.gopal@...el.com>
Subject: [PATCHv2] bq27x00_battery: Add support for BQ27425 chip

This patch adds support for BQ27425 (TI) chip. This
chip is same as BQ27500 with few registers removed
and register address map changed. The data sheet for
this chip is publicly available at
http://www.ti.com/product/bq27425-g1

Changes since v1:
	Remove the additional Kconfig entry
	Add a second power_supply_property array for bq27425
	 and assign the appropriate array at run-time based
	 on battery type.
Signed-off-by: Saranya Gopal <saranya.gopal@...el.com>
---
 drivers/power/bq27x00_battery.c |   99 +++++++++++++++++++++++++++++++--------
 1 files changed, 79 insertions(+), 20 deletions(-)

diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index f5d6d37..58775ea 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -22,6 +22,7 @@
  * Datasheets:
  * http://focus.ti.com/docs/prod/folders/print/bq27000.html
  * http://focus.ti.com/docs/prod/folders/print/bq27500.html
+ * http://www.ti.com/product/bq27425-g1
  */
 
 #include <linux/module.h>
@@ -67,6 +68,14 @@
 #define BQ27500_FLAG_SOC1		BIT(2) /* State-of-Charge threshold 1 */
 #define BQ27500_FLAG_FC			BIT(9)
 
+#define BQ27425_REG_TEMP		0x02
+#define BQ27425_REG_VOLT		0x04
+#define BQ27425_REG_FLAGS		0x06
+#define BQ27425_REG_NAC			0x08
+#define BQ27425_REG_FCC			0x0E
+#define BQ27425_REG_AI			0x10
+#define BQ27425_REG_SOC			0x1C
+
 #define BQ27000_RS			20 /* Resistor sense */
 
 struct bq27x00_device_info;
@@ -74,7 +83,7 @@ struct bq27x00_access_methods {
 	int (*read)(struct bq27x00_device_info *di, u8 reg, bool single);
 };
 
-enum bq27x00_chip { BQ27000, BQ27500 };
+enum bq27x00_chip { BQ27000, BQ27500, BQ27425};
 
 struct bq27x00_reg_cache {
 	int temperature;
@@ -125,6 +134,20 @@ static enum power_supply_property bq27x00_battery_props[] = {
 	POWER_SUPPLY_PROP_ENERGY_NOW,
 };
 
+static enum power_supply_property bq27425_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+};
+
 static unsigned int poll_interval = 360;
 module_param(poll_interval, uint, 0644);
 MODULE_PARM_DESC(poll_interval, "battery poll interval in seconds - " \
@@ -150,6 +173,8 @@ static int bq27x00_battery_read_rsoc(struct bq27x00_device_info *di)
 
 	if (di->chip == BQ27500)
 		rsoc = bq27x00_read(di, BQ27500_REG_SOC, false);
+	else if (di->chip == BQ27425)
+		rsoc = bq27x00_read(di, BQ27425_REG_SOC, false);
 	else
 		rsoc = bq27x00_read(di, BQ27000_REG_RSOC, true);
 
@@ -174,7 +199,7 @@ static int bq27x00_battery_read_charge(struct bq27x00_device_info *di, u8 reg)
 		return charge;
 	}
 
-	if (di->chip == BQ27500)
+	if (di->chip == BQ27500 || di->chip == BQ27425)
 		charge *= 1000;
 	else
 		charge = charge * 3570 / BQ27000_RS;
@@ -188,6 +213,8 @@ static int bq27x00_battery_read_charge(struct bq27x00_device_info *di, u8 reg)
  */
 static inline int bq27x00_battery_read_nac(struct bq27x00_device_info *di)
 {
+	if (di->chip == BQ27425)
+		return bq27x00_battery_read_charge(di, BQ27425_REG_NAC);
 	return bq27x00_battery_read_charge(di, BQ27x00_REG_NAC);
 }
 
@@ -197,6 +224,8 @@ static inline int bq27x00_battery_read_nac(struct bq27x00_device_info *di)
  */
 static inline int bq27x00_battery_read_lmd(struct bq27x00_device_info *di)
 {
+	if (di->chip == BQ27425)
+		return bq27x00_battery_read_charge(di, BQ27425_REG_FCC);
 	return bq27x00_battery_read_charge(di, BQ27x00_REG_LMD);
 }
 
@@ -208,7 +237,7 @@ static int bq27x00_battery_read_ilmd(struct bq27x00_device_info *di)
 {
 	int ilmd;
 
-	if (di->chip == BQ27500)
+	if (di->chip == BQ27500  || di->chip == BQ27425)
 		ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false);
 	else
 		ilmd = bq27x00_read(di, BQ27000_REG_ILMD, true);
@@ -218,7 +247,7 @@ static int bq27x00_battery_read_ilmd(struct bq27x00_device_info *di)
 		return ilmd;
 	}
 
-	if (di->chip == BQ27500)
+	if (di->chip == BQ27500 || di->chip == BQ27425)
 		ilmd *= 1000;
 	else
 		ilmd = ilmd * 256 * 3570 / BQ27000_RS;
@@ -256,13 +285,16 @@ static int bq27x00_battery_read_temperature(struct bq27x00_device_info *di)
 {
 	int temp;
 
-	temp = bq27x00_read(di, BQ27x00_REG_TEMP, false);
+	if (di->chip == BQ27425)
+		temp = bq27x00_read(di, BQ27425_REG_TEMP, false);
+	else
+		temp = bq27x00_read(di, BQ27x00_REG_TEMP, false);
 	if (temp < 0) {
 		dev_err(di->dev, "error reading temperature\n");
 		return temp;
 	}
 
-	if (di->chip == BQ27500)
+	if (di->chip == BQ27500 || di->chip == BQ27425)
 		temp -= 2731;
 	else
 		temp = ((temp * 5) - 5463) / 2;
@@ -310,10 +342,15 @@ static void bq27x00_update(struct bq27x00_device_info *di)
 {
 	struct bq27x00_reg_cache cache = {0, };
 	bool is_bq27500 = di->chip == BQ27500;
+	bool is_bq27425 = di->chip == BQ27425;
 
-	cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, !is_bq27500);
+	if (is_bq27425)
+		cache.flags = bq27x00_read(di, BQ27425_REG_FLAGS, !is_bq27425);
+	else
+		cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, !is_bq27500);
 	if (cache.flags >= 0) {
-		if (!is_bq27500 && (cache.flags & BQ27000_FLAG_CI)) {
+		if (!is_bq27500 && !is_bq27425
+				&& (cache.flags & BQ27000_FLAG_CI)) {
 			dev_info(di->dev, "battery is not calibrated! ignoring capacity values\n");
 			cache.capacity = -ENODATA;
 			cache.energy = -ENODATA;
@@ -323,14 +360,23 @@ static void bq27x00_update(struct bq27x00_device_info *di)
 			cache.charge_full = -ENODATA;
 		} else {
 			cache.capacity = bq27x00_battery_read_rsoc(di);
-			cache.energy = bq27x00_battery_read_energy(di);
-			cache.time_to_empty = bq27x00_battery_read_time(di, BQ27x00_REG_TTE);
-			cache.time_to_empty_avg = bq27x00_battery_read_time(di, BQ27x00_REG_TTECP);
-			cache.time_to_full = bq27x00_battery_read_time(di, BQ27x00_REG_TTF);
+			if (!is_bq27425) {
+				cache.energy = bq27x00_battery_read_energy(di);
+				cache.time_to_empty =
+					bq27x00_battery_read_time(di,
+							BQ27x00_REG_TTE);
+				cache.time_to_empty_avg =
+					bq27x00_battery_read_time(di,
+							BQ27x00_REG_TTECP);
+				cache.time_to_full =
+					bq27x00_battery_read_time(di,
+							BQ27x00_REG_TTF);
+			}
 			cache.charge_full = bq27x00_battery_read_lmd(di);
 		}
 		cache.temperature = bq27x00_battery_read_temperature(di);
-		cache.cycle_count = bq27x00_battery_read_cyct(di);
+		if (!is_bq27425)
+			cache.cycle_count = bq27x00_battery_read_cyct(di);
 
 		/* We only have to read charge design full once */
 		if (di->charge_design_full <= 0)
@@ -370,13 +416,16 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di,
 	int curr;
 	int flags;
 
-	curr = bq27x00_read(di, BQ27x00_REG_AI, false);
+	if (di->chip == BQ27425)
+		curr = bq27x00_read(di, BQ27425_REG_AI, false);
+	else
+		curr = bq27x00_read(di, BQ27x00_REG_AI, false);
 	if (curr < 0) {
 		dev_err(di->dev, "error reading current\n");
 		return curr;
 	}
 
-	if (di->chip == BQ27500) {
+	if (di->chip == BQ27500 || di->chip == BQ27425) {
 		/* bq27500 returns signed value */
 		val->intval = (int)((s16)curr) * 1000;
 	} else {
@@ -397,7 +446,7 @@ static int bq27x00_battery_status(struct bq27x00_device_info *di,
 {
 	int status;
 
-	if (di->chip == BQ27500) {
+	if (di->chip == BQ27500 || di->chip == BQ27425) {
 		if (di->cache.flags & BQ27500_FLAG_FC)
 			status = POWER_SUPPLY_STATUS_FULL;
 		else if (di->cache.flags & BQ27500_FLAG_DSC)
@@ -425,7 +474,7 @@ static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di,
 {
 	int level;
 
-	if (di->chip == BQ27500) {
+	if (di->chip == BQ27500 || di->chip == BQ27425) {
 		if (di->cache.flags & BQ27500_FLAG_FC)
 			level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
 		else if (di->cache.flags & BQ27500_FLAG_SOC1)
@@ -459,7 +508,10 @@ static int bq27x00_battery_voltage(struct bq27x00_device_info *di,
 {
 	int volt;
 
-	volt = bq27x00_read(di, BQ27x00_REG_VOLT, false);
+	if (di->chip == BQ27425)
+		volt = bq27x00_read(di, BQ27425_REG_VOLT, false);
+	else
+		volt = bq27x00_read(di, BQ27x00_REG_VOLT, false);
 	if (volt < 0) {
 		dev_err(di->dev, "error reading voltage\n");
 		return volt;
@@ -570,8 +622,14 @@ static int bq27x00_powersupply_init(struct bq27x00_device_info *di)
 	int ret;
 
 	di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
-	di->bat.properties = bq27x00_battery_props;
-	di->bat.num_properties = ARRAY_SIZE(bq27x00_battery_props);
+	di->chip = BQ27425;
+	if (di->chip == BQ27425) {
+		di->bat.properties = bq27425_battery_props;
+		di->bat.num_properties = ARRAY_SIZE(bq27425_battery_props);
+	} else {
+		di->bat.properties = bq27x00_battery_props;
+		di->bat.num_properties = ARRAY_SIZE(bq27x00_battery_props);
+	}
 	di->bat.get_property = bq27x00_battery_get_property;
 	di->bat.external_power_changed = bq27x00_external_power_changed;
 
@@ -729,6 +787,7 @@ static int bq27x00_battery_remove(struct i2c_client *client)
 static const struct i2c_device_id bq27x00_id[] = {
 	{ "bq27200", BQ27000 },	/* bq27200 is same as bq27000, but with i2c */
 	{ "bq27500", BQ27500 },
+	{ "bq27425", BQ27425 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27x00_id);
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ