| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <34b5e216a6dbd83d282dad22c2644136c652c34a.1340139586.git.dvhart@linux.intel.com>
Date: Tue, 19 Jun 2012 14:00:18 -0700
From: Darren Hart <dvhart@...ux.intel.com>
To: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Cc: Darren Hart <dvhart@...ux.intel.com>,
Tomoya MORINAGA <tomoya.rohm@...il.com>,
Feng Tang <feng.tang@...el.com>,
Alexander Stein <alexander.stein@...tec-electronic.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Alan Cox <alan@...ux.intel.com>, linux-serial@...r.kernel.org
Subject: [PATCH V3] pch_uart: Add eg20t_port lock field, avoid recursive spinlocks
pch_uart_interrupt() takes priv->port.lock which leads to two recursive
spinlock calls if low_latency==1 or CONFIG_PREEMPT_RT_FULL=y (one
otherwise):
pch_uart_interrupt
spin_lock_irqsave(priv->port.lock, flags)
case PCH_UART_IID_RDR_TO (data ready)
handle_rx_to
push_rx
tty_port_tty_get
spin_lock_irqsave(&port->lock, flags) <--- already hold this lock
...
tty_flip_buffer_push
...
flush_to_ldisc
spin_lock_irqsave(&tty->buf.lock)
spin_lock_irqsave(&tty->buf.lock)
disc->ops->receive_buf(tty, char_buf)
n_tty_receive_buf
tty->ops->flush_chars()
uart_flush_chars
uart_start
spin_lock_irqsave(&port->lock) <--- already hold this lock
Avoid this by using a dedicated lock to protect the eg20t_port structure
and IO access to its membase. This is more consistent with the 8250
driver. Ensure priv->lock is always take prior to priv->port.lock when
taken at the same time.
V2: Remove inadvertent whitespace change.
V3: Account for oops_in_progress for the private lock in
pch_console_write().
Note: Like the 8250 driver, if a printk is introduced anywhere inside
the pch_console_write() critical section, the kernel will hang
on a recursive spinlock on the private lock. The oops case is
handled by using a trylock in the oops_in_progress case.
Signed-off-by: Darren Hart <dvhart@...ux.intel.com>
CC: Tomoya MORINAGA <tomoya.rohm@...il.com>
CC: Feng Tang <feng.tang@...el.com>
CC: Alexander Stein <alexander.stein@...tec-electronic.com>
CC: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: Alan Cox <alan@...ux.intel.com>
CC: linux-serial@...r.kernel.org
---
drivers/tty/serial/pch_uart.c | 38 ++++++++++++++++++++++++++------------
1 files changed, 26 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 4fdec6a..d291518 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -253,6 +253,9 @@ struct eg20t_port {
dma_addr_t rx_buf_dma;
struct dentry *debugfs;
+
+ /* protect the eg20t_port private structure and io access to membase */
+ spinlock_t lock;
};
/**
@@ -1058,7 +1061,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
int next = 1;
u8 msr;
- spin_lock_irqsave(&priv->port.lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
handled = 0;
while (next) {
iid = pch_uart_hal_get_iid(priv);
@@ -1116,7 +1119,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
handled |= (unsigned int)ret;
}
- spin_unlock_irqrestore(&priv->port.lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
return IRQ_RETVAL(handled);
}
@@ -1226,9 +1229,9 @@ static void pch_uart_break_ctl(struct uart_port *port, int ctl)
unsigned long flags;
priv = container_of(port, struct eg20t_port, port);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
pch_uart_hal_set_break(priv, ctl);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
/* Grab any interrupt resources and initialise any low level driver state. */
@@ -1376,7 +1379,8 @@ static void pch_uart_set_termios(struct uart_port *port,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
+ spin_lock(&port->lock);
uart_update_timeout(port, termios->c_cflag, baud);
rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
@@ -1389,7 +1393,8 @@ static void pch_uart_set_termios(struct uart_port *port,
tty_termios_encode_baud_rate(termios, baud, baud);
out:
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
static const char *pch_uart_type(struct uart_port *port)
@@ -1538,8 +1543,9 @@ pch_console_write(struct console *co, const char *s, unsigned int count)
{
struct eg20t_port *priv;
unsigned long flags;
+ int priv_locked = 1;
+ int port_locked = 1;
u8 ier;
- int locked = 1;
priv = pch_uart_ports[co->index];
@@ -1547,12 +1553,16 @@ pch_console_write(struct console *co, const char *s, unsigned int count)
local_irq_save(flags);
if (priv->port.sysrq) {
- /* serial8250_handle_port() already took the lock */
- locked = 0;
+ spin_lock(&priv->lock);
+ /* serial8250_handle_port() already took the port lock */
+ port_locked = 0;
} else if (oops_in_progress) {
- locked = spin_trylock(&priv->port.lock);
- } else
+ priv_locked = spin_trylock(&priv->lock);
+ port_locked = spin_trylock(&priv->port.lock);
+ } else {
+ spin_lock(&priv->lock);
spin_lock(&priv->port.lock);
+ }
/*
* First save the IER then disable the interrupts
@@ -1570,8 +1580,10 @@ pch_console_write(struct console *co, const char *s, unsigned int count)
wait_for_xmitr(priv, BOTH_EMPTY);
iowrite8(ier, priv->membase + UART_IER);
- if (locked)
+ if (port_locked)
spin_unlock(&priv->port.lock);
+ if (priv_locked)
+ spin_unlock(&priv->lock);
local_irq_restore(flags);
}
@@ -1669,6 +1681,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
pci_enable_msi(pdev);
pci_set_master(pdev);
+ spin_lock_init(&priv->lock);
+
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
priv->mapbase = mapbase;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists