| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1340241040-22257-1-git-send-email-cw00.choi@samsung.com>
Date: Thu, 21 Jun 2012 10:10:40 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: gregkh@...uxfoundation.org
Cc: thomas.abraham@...aro.org, broonie@...nsource.wolfsonmicro.com,
grant.likely@...retlab.ca, sameo@...ux.intel.com,
myungjoo.ham@...sung.com, kyungmin.park@...sung.com,
linux-kernel@...r.kernel.org, Chanwoo Choi <cw00.choi@...sung.com>
Subject: [PATCH 1/2] mfd: add irq domain support for max8997 interrupts
From: Thomas Abraham <thomas.abraham@...aro.org>
Add irq domain support for max8997 interrupts. The reverse mapping method
used is linear mapping since the sub-drivers of max8997 such as regulator
and charger drivers can use the max8997 irq_domain to get the linux irq
number for max8997 interrupts. All uses of irq_base in platform data and
max8997 driver private data are removed.
Signed-off-by: Thomas Abraham <thomas.abraham@...aro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@...sung.com>
Acked-by: Grant Likely <grant.likely@...retlab.ca>
Acked-by: Samuel Ortiz <sameo@...ux.intel.com>
Signed-off-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
[Fix two bug which set max8997->irq_domain and correct wrong parameter]
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
---
arch/arm/mach-exynos/mach-nuri.c | 4 --
arch/arm/mach-exynos/mach-origen.c | 1 -
drivers/mfd/Kconfig | 1 +
drivers/mfd/max8997-irq.c | 62 +++++++++++++++++++++--------------
drivers/mfd/max8997.c | 1 -
include/linux/mfd/max8997-private.h | 4 ++-
include/linux/mfd/max8997.h | 1 -
7 files changed, 41 insertions(+), 33 deletions(-)
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 656f8fc..acb58f5 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1067,12 +1067,8 @@ static struct platform_device nuri_max8903_device = {
static void __init nuri_power_init(void)
{
int gpio;
- int irq_base = IRQ_GPIO_END + 1;
int ta_en = 0;
- nuri_max8997_pdata.irq_base = irq_base;
- irq_base += MAX8997_IRQ_NR;
-
gpio = EXYNOS4_GPX0(7);
gpio_request(gpio, "AP_PMIC_IRQ");
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index f5572be..3ce403d 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -425,7 +425,6 @@ static struct max8997_platform_data __initdata origen_max8997_pdata = {
.buck1_gpiodvs = false,
.buck2_gpiodvs = false,
.buck5_gpiodvs = false,
- .irq_base = IRQ_GPIO_END + 1,
.ignore_gpiodvs_side_effect = true,
.buck125_default_idx = 0x0,
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e129c82..295941b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -449,6 +449,7 @@ config MFD_MAX8997
bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
+ select IRQ_DOMAIN
help
Say yes here to support for Maxim Semiconductor MAX8997/8966.
This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
diff --git a/drivers/mfd/max8997-irq.c b/drivers/mfd/max8997-irq.c
index 09274cf..43fa614 100644
--- a/drivers/mfd/max8997-irq.c
+++ b/drivers/mfd/max8997-irq.c
@@ -142,7 +142,8 @@ static void max8997_irq_sync_unlock(struct irq_data *data)
static const inline struct max8997_irq_data *
irq_to_max8997_irq(struct max8997_dev *max8997, int irq)
{
- return &max8997_irqs[irq - max8997->irq_base];
+ struct irq_data *data = irq_get_irq_data(irq);
+ return &max8997_irqs[data->hwirq];
}
static void max8997_irq_mask(struct irq_data *data)
@@ -182,7 +183,7 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
u8 irq_reg[MAX8997_IRQ_GROUP_NR] = {};
u8 irq_src;
int ret;
- int i;
+ int i, cur_irq;
ret = max8997_read_reg(max8997->i2c, MAX8997_REG_INTSRC, &irq_src);
if (ret < 0) {
@@ -269,8 +270,11 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
/* Report */
for (i = 0; i < MAX8997_IRQ_NR; i++) {
- if (irq_reg[max8997_irqs[i].group] & max8997_irqs[i].mask)
- handle_nested_irq(max8997->irq_base + i);
+ if (irq_reg[max8997_irqs[i].group] & max8997_irqs[i].mask) {
+ cur_irq = irq_find_mapping(max8997->irq_domain, i);
+ if (cur_irq)
+ handle_nested_irq(cur_irq);
+ }
}
return IRQ_HANDLED;
@@ -278,26 +282,40 @@ static irqreturn_t max8997_irq_thread(int irq, void *data)
int max8997_irq_resume(struct max8997_dev *max8997)
{
- if (max8997->irq && max8997->irq_base)
- max8997_irq_thread(max8997->irq_base, max8997);
+ if (max8997->irq && max8997->irq_domain)
+ max8997_irq_thread(0, max8997);
+ return 0;
+}
+
+static int max8997_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ struct max8997_dev *max8997 = d->host_data;
+
+ irq_set_chip_data(irq, max8997);
+ irq_set_chip_and_handler(irq, &max8997_irq_chip, handle_edge_irq);
+ irq_set_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ irq_set_noprobe(irq);
+#endif
return 0;
}
+static struct irq_domain_ops max8997_irq_domain_ops = {
+ .map = max8997_irq_domain_map,
+};
+
int max8997_irq_init(struct max8997_dev *max8997)
{
+ struct irq_domain *domain;
int i;
- int cur_irq;
int ret;
u8 val;
if (!max8997->irq) {
dev_warn(max8997->dev, "No interrupt specified.\n");
- max8997->irq_base = 0;
- return 0;
- }
-
- if (!max8997->irq_base) {
- dev_err(max8997->dev, "No interrupt base specified.\n");
return 0;
}
@@ -327,19 +345,13 @@ int max8997_irq_init(struct max8997_dev *max8997)
true : false;
}
- /* Register with genirq */
- for (i = 0; i < MAX8997_IRQ_NR; i++) {
- cur_irq = i + max8997->irq_base;
- irq_set_chip_data(cur_irq, max8997);
- irq_set_chip_and_handler(cur_irq, &max8997_irq_chip,
- handle_edge_irq);
- irq_set_nested_thread(cur_irq, 1);
-#ifdef CONFIG_ARM
- set_irq_flags(cur_irq, IRQF_VALID);
-#else
- irq_set_noprobe(cur_irq);
-#endif
+ domain = irq_domain_add_linear(NULL, MAX8997_IRQ_NR,
+ &max8997_irq_domain_ops, max8997);
+ if (!domain) {
+ dev_err(max8997->dev, "could not create irq domain\n");
+ return -ENODEV;
}
+ max8997->irq_domain = domain;
ret = request_threaded_irq(max8997->irq, NULL, max8997_irq_thread,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index cb83a7a..20ecad3 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -143,7 +143,6 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
if (!pdata)
goto err;
- max8997->irq_base = pdata->irq_base;
max8997->ono = pdata->ono;
mutex_init(&max8997->iolock);
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
index 3f4deb6..830152c 100644
--- a/include/linux/mfd/max8997-private.h
+++ b/include/linux/mfd/max8997-private.h
@@ -23,6 +23,8 @@
#define __LINUX_MFD_MAX8997_PRIV_H
#include <linux/i2c.h>
+#include <linux/export.h>
+#include <linux/irqdomain.h>
#define MAX8997_REG_INVALID (0xff)
@@ -325,7 +327,7 @@ struct max8997_dev {
int irq;
int ono;
- int irq_base;
+ struct irq_domain *irq_domain;
struct mutex irqlock;
int irq_masks_cur[MAX8997_IRQ_GROUP_NR];
int irq_masks_cache[MAX8997_IRQ_GROUP_NR];
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index b40c08c..328d8e2 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -181,7 +181,6 @@ struct max8997_led_platform_data {
struct max8997_platform_data {
/* IRQ */
- int irq_base;
int ono;
int wakeup;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists