lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:	Mon, 25 Jun 2012 14:48:30 -0600
From:	Shuah Khan <shuahkhan@...il.com>
To:	"G.Shark Jeong" <gshark.jeong@...il.com>
Cc:	shuahkhan@...il.com, Bryan Wu <bryan.wu@...onical.com>,
	Richard Purdie <rpurdie@...ys.net>,
	Daniel Jeong <daniel.jeong@...com>,
	linux-kernel@...r.kernel.org, milo kim <milo.kim@...com>
Subject: Re: [PATCH 1/1 v3] leds: Add LED driver for lm3556 chip

On Wed, 2012-06-20 at 14:11 +0900, G.Shark Jeong wrote:
> From: "G.Shark Jeong" <gshark.jeong@...il.com>
> 
> LM3556 :
> The LM3556 is a 4 MHz fixed-frequency synchronous boost
> converter plus 1.5A constant current driver for a high-current white LED.
> Datasheet: www.national.com/ds/LM/LM3556.pdf
> 
> Tested on OMAP4430
> 
> Signed-off-by: G.Shark Jeong <gshark.jeong@...il.com>
> ---
>  drivers/leds/Kconfig                      |    7 +
>  drivers/leds/Makefile                     |    1 +
>  drivers/leds/leds-lm3556.c                |  529 +++++++++++++++++++++++++++++
>  include/linux/platform_data/leds-lm3556.h |   50 +++
>  4 files changed, 587 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/leds/leds-lm3556.c
>  create mode 100644 include/linux/platform_data/leds-lm3556.h
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 04cb8c8..a5f3e00 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -415,6 +415,13 @@ config LEDS_MAX8997
>  	  This option enables support for on-chip LED drivers on
>  	  MAXIM MAX8997 PMIC.
>  
> +config LEDS_LM3556
> +	tristate "LED support for LM3556 Chip"
> +	depends on LEDS_CLASS && I2C
> +	help
> +	  This option enables support for LEDs connected LM3556.
> +	  LM3556 includes Torch, Flash and Indicator functions.
> +
>  config LEDS_OT200
>  	tristate "LED support for the Bachmann OT200"
>  	depends on LEDS_CLASS && HAS_IOMEM
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index f8958cd..2d69a86 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -47,6 +47,7 @@ obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
>  obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
>  obj-$(CONFIG_LEDS_RENESAS_TPU)		+= leds-renesas-tpu.o
>  obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
> +obj-$(CONFIG_LEDS_LM3556)		+= leds-lm3556.o
>  
>  # LED SPI Drivers
>  obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
> diff --git a/drivers/leds/leds-lm3556.c b/drivers/leds/leds-lm3556.c
> new file mode 100644
> index 0000000..954dd59
> --- /dev/null
> +++ b/drivers/leds/leds-lm3556.c
> @@ -0,0 +1,529 @@
> +/*
> + * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03)
> + * Copyright (C) 2012 Texas Instruments
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Please refer Documentation/leds/leds-lm3556.txt file.
> + */
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/leds.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/fs.h>
> +#include <linux/regmap.h>
> +#include <linux/platform_data/leds-lm3556.h>
> +
> +#define REG_FILT_TIME			(0x0)
> +#define REG_IVFM_MODE			(0x1)
> +#define REG_NTC				(0x2)
> +#define REG_INDIC_TIME			(0x3)
> +#define REG_INDIC_BLINK			(0x4)
> +#define REG_INDIC_PERIOD		(0x5)
> +#define REG_TORCH_TIME			(0x6)
> +#define REG_CONF			(0x7)
> +#define REG_FLASH			(0x8)
> +#define REG_I_CTRL			(0x9)
> +#define REG_ENABLE			(0xA)
> +#define REG_FLAG			(0xB)
> +#define REG_MAX				(0xC)
> +
> +#define IVFM_FILTER_TIME_SHIFT		(3)
> +#define UVLO_EN_SHIFT			(7)
> +#define HYSTERSIS_SHIFT			(5)
> +#define IVM_D_TH_SHIFT			(2)
> +#define IVFM_ADJ_MODE_SHIFT		(0)
> +#define NTC_EVENT_LVL_SHIFT		(5)
> +#define NTC_TRIP_TH_SHIFT		(2)
> +#define NTC_BIAS_I_LVL_SHIFT		(0)
> +#define INDIC_RAMP_UP_TIME_SHIFT	(3)
> +#define INDIC_RAMP_DN_TIME_SHIFT	(0)
> +#define INDIC_N_BLANK_SHIFT		(4)
> +#define INDIC_PULSE_TIME_SHIFT		(0)
> +#define INDIC_N_PERIOD_SHIFT		(0)
> +#define TORCH_RAMP_UP_TIME_SHIFT	(3)
> +#define TORCH_RAMP_DN_TIME_SHIFT	(0)
> +#define STROBE_USUAGE_SHIFT		(7)
> +#define STROBE_PIN_POLARITY_SHIFT	(6)
> +#define TORCH_PIN_POLARITY_SHIFT	(5)
> +#define TX_PIN_POLARITY_SHIFT		(4)
> +#define TX_EVENT_LVL_SHIFT		(3)
> +#define IVFM_EN_SHIFT			(2)
> +#define NTC_MODE_SHIFT			(1)
> +#define INDIC_MODE_SHIFT		(0)
> +#define INDUCTOR_I_LIMIT_SHIFT		(6)
> +#define FLASH_RAMP_TIME_SHIFT		(3)
> +#define FLASH_TOUT_TIME_SHIFT		(0)
> +#define TORCH_I_SHIFT			(4)
> +#define FLASH_I_SHIFT			(0)
> +#define NTC_EN_SHIFT			(7)
> +#define TX_PIN_EN_SHIFT			(6)
> +#define STROBE_PIN_EN_SHIFT		(5)
> +#define TORCH_PIN_EN_SHIFT		(4)
> +#define PRECHG_MODE_EN_SHIFT		(3)
> +#define PASS_MODE_ONLY_EN_SHIFT		(2)
> +#define MODE_BITS_SHIFT			(0)
> +
> +#define IVFM_FILTER_TIME_MASK		(0x3)
> +#define UVLO_EN_MASK			(0x1)
> +#define HYSTERSIS_MASK			(0x3)
> +#define IVM_D_TH_MASK			(0x7)
> +#define IVFM_ADJ_MODE_MASK		(0x3)
> +#define NTC_EVENT_LVL_MASK		(0x1)
> +#define NTC_TRIP_TH_MASK		(0x7)
> +#define NTC_BIAS_I_LVL_MASK		(0x3)
> +#define INDIC_RAMP_UP_TIME_MASK		(0x7)
> +#define INDIC_RAMP_DN_TIME_MASK		(0x7)
> +#define INDIC_N_BLANK_MASK		(0x7)
> +#define INDIC_PULSE_TIME_MASK		(0x7)
> +#define INDIC_N_PERIOD_MASK		(0x7)
> +#define TORCH_RAMP_UP_TIME_MASK		(0x7)
> +#define TORCH_RAMP_DN_TIME_MASK		(0x7)
> +#define STROBE_USUAGE_MASK		(0x1)
> +#define STROBE_PIN_POLARITY_MASK	(0x1)
> +#define TORCH_PIN_POLARITY_MASK		(0x1)
> +#define TX_PIN_POLARITY_MASK		(0x1)
> +#define TX_EVENT_LVL_MASK		(0x1)
> +#define IVFM_EN_MASK			(0x1)
> +#define NTC_MODE_MASK			(0x1)
> +#define INDIC_MODE_MASK			(0x1)
> +#define INDUCTOR_I_LIMIT_MASK		(0x3)
> +#define FLASH_RAMP_TIME_MASK		(0x7)
> +#define FLASH_TOUT_TIME_MASK		(0x7)
> +#define TORCH_I_MASK			(0x7)
> +#define FLASH_I_MASK			(0xF)
> +#define NTC_EN_MASK			(0x1)
> +#define TX_PIN_EN_MASK			(0x1)
> +#define STROBE_PIN_EN_MASK		(0x1)
> +#define TORCH_PIN_EN_MASK		(0x1)
> +#define PRECHG_MODE_EN_MASK		(0x1)
> +#define PASS_MODE_ONLY_EN_MASK		(0x1)
> +#define MODE_BITS_MASK			(0x13)
> +#define EX_PIN_CONTROL_MASK		(0xF1)
> +#define EX_PIN_ENABLE_MASK		(0x70)
> +
> +enum lm3556_indic_pulse_time {
> +	PULSE_TIME_0_MS = 0,
> +	PULSE_TIME_32_MS,
> +	PULSE_TIME_64_MS,
> +	PULSE_TIME_92_MS,
> +	PULSE_TIME_128_MS,
> +	PULSE_TIME_160_MS,
> +	PULSE_TIME_196_MS,
> +	PULSE_TIME_224_MS,
> +	PULSE_TIME_256_MS,
> +	PULSE_TIME_288_MS,
> +	PULSE_TIME_320_MS,
> +	PULSE_TIME_352_MS,
> +	PULSE_TIME_384_MS,
> +	PULSE_TIME_416_MS,
> +	PULSE_TIME_448_MS,
> +	PULSE_TIME_480_MS,
> +};
> +
> +enum lm3556_indic_n_blank {
> +	INDIC_N_BLANK_0 = 0,
> +	INDIC_N_BLANK_1,
> +	INDIC_N_BLANK_2,
> +	INDIC_N_BLANK_3,
> +	INDIC_N_BLANK_4,
> +	INDIC_N_BLANK_5,
> +	INDIC_N_BLANK_6,
> +	INDIC_N_BLANK_7,
> +	INDIC_N_BLANK_8,
> +	INDIC_N_BLANK_9,
> +	INDIC_N_BLANK_10,
> +	INDIC_N_BLANK_11,
> +	INDIC_N_BLANK_12,
> +	INDIC_N_BLANK_13,
> +	INDIC_N_BLANK_14,
> +	INDIC_N_BLANK_15,
> +};
> +
> +enum lm3556_indic_period {
> +	INDIC_PERIOD_0 = 0,
> +	INDIC_PERIOD_1,
> +	INDIC_PERIOD_2,
> +	INDIC_PERIOD_3,
> +	INDIC_PERIOD_4,
> +	INDIC_PERIOD_5,
> +	INDIC_PERIOD_6,
> +	INDIC_PERIOD_7,
> +};
> +
> +enum lm3556_mode {
> +	MODES_STASNDBY = 0,
> +	MODES_INDIC,
> +	MODES_TORCH,
> +	MODES_FLASH
> +};
> +
> +#define INDIC_PATTERN_SIZE 4
> +
> +struct indicator {
> +	u8 blinking;
> +	u8 period_cnt;
> +};
> +
> +struct lm3556_chip_data {
> +	struct i2c_client *client;
> +
> +	struct led_classdev cdev_flash;
> +	struct led_classdev cdev_torch;
> +	struct led_classdev cdev_indicator;
> +
> +	struct lm3556_platform_data *pdata;
> +	struct regmap *regmap;
> +	struct mutex lock;
> +
> +	unsigned int last_flag;
> +};
> +
> +/* indicator pattern */
> +static struct indicator indicator_pattern[INDIC_PATTERN_SIZE] = {
> +	[0] = {(INDIC_N_BLANK_1 << INDIC_N_BLANK_SHIFT)
> +	       | PULSE_TIME_32_MS, INDIC_PERIOD_1},
> +	[1] = {(INDIC_N_BLANK_15 << INDIC_N_BLANK_SHIFT)
> +	       | PULSE_TIME_32_MS, INDIC_PERIOD_2},
> +	[2] = {(INDIC_N_BLANK_10 << INDIC_N_BLANK_SHIFT)
> +	       | PULSE_TIME_32_MS, INDIC_PERIOD_4},
> +	[3] = {(INDIC_N_BLANK_5 << INDIC_N_BLANK_SHIFT)
> +	       | PULSE_TIME_32_MS, INDIC_PERIOD_7},
> +};
> +
> +/* chip initialize */
> +static int lm3556_chip_init(struct lm3556_chip_data *chip)
> +{
> +	unsigned int reg_val;
> +	int ret;
> +	struct i2c_client *client = chip->client;
> +	struct lm3556_platform_data *pdata = chip->pdata;
> +
> +	/* set config register */
> +	ret = regmap_read(chip->regmap, REG_CONF, &reg_val);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to read REG_CONF Register\n");
> +		goto out;
> +	}
> +
> +	reg_val &= (~EX_PIN_CONTROL_MASK);
> +	reg_val |= ((pdata->torch_pin_polarity & 0x01)
> +		    << TORCH_PIN_POLARITY_SHIFT);
> +	reg_val |= ((pdata->strobe_usuage & 0x01) << STROBE_USUAGE_SHIFT);
> +	reg_val |= ((pdata->strobe_pin_polarity & 0x01)
> +		    << STROBE_PIN_POLARITY_SHIFT);
> +	reg_val |= ((pdata->tx_pin_polarity & 0x01) << TX_PIN_POLARITY_SHIFT);
> +	reg_val |= ((pdata->indicator_mode & 0x01) << INDIC_MODE_SHIFT);
> +
> +	ret = regmap_write(chip->regmap, REG_CONF, reg_val);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to write REG_CONF Regisgter\n");
> +		goto out;
> +	}
> +
> +	/* set enable register */
> +	ret = regmap_read(chip->regmap, REG_ENABLE, &reg_val);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to read REG_ENABLE Register\n");
> +		goto out;
> +	}
> +
> +	reg_val &= (~EX_PIN_ENABLE_MASK);
> +	reg_val |= ((pdata->torch_pin_en & 0x01) << TORCH_PIN_EN_SHIFT);
> +	reg_val |= ((pdata->strobe_pin_en & 0x01) << STROBE_PIN_EN_SHIFT);
> +	reg_val |= ((pdata->tx_pin_en & 0x01) << TX_PIN_EN_SHIFT);
> +
> +	ret = regmap_write(chip->regmap, REG_ENABLE, reg_val);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to write REG_ENABLE Regisgter\n");
> +		goto out;
> +	}
> +
> +out:
> +	return ret;
> +}
> +
> +/* chip control */
> +static int lm3556_control(struct lm3556_chip_data *chip,
> +			  u8 brightness, enum lm3556_mode opmode)
> +{
> +	int ret;
> +	struct i2c_client *client = chip->client;
> +	struct lm3556_platform_data *pdata = chip->pdata;
> +
> +	ret = regmap_read(chip->regmap, REG_FLAG, &chip->last_flag);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to read REG_FLAG Register\n");
> +		goto out;
> +	}
> +
> +	if (chip->last_flag)
> +		dev_info(&client->dev, "Last FLAG is 0x%x\n", chip->last_flag);
> +
> +	/* brightness 0 means off-state */
> +	if (!brightness)
> +		opmode = MODES_STASNDBY;
> +
> +	switch (opmode) {
> +	case MODES_TORCH:
> +		ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
> +					 TORCH_I_MASK << TORCH_I_SHIFT,
> +					 (brightness - 1) << TORCH_I_SHIFT);
> +
> +		if (pdata->torch_pin_en)
> +			opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT);
> +		break;
> +
> +	case MODES_FLASH:
> +		ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
> +					 FLASH_I_MASK << FLASH_I_SHIFT,
> +					 (brightness - 1) << FLASH_I_SHIFT);
> +		break;
> +
> +	case MODES_INDIC:
> +		ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
> +					 TORCH_I_MASK << TORCH_I_SHIFT,
> +					 (brightness - 1) << TORCH_I_SHIFT);
> +		break;
> +
> +	case MODES_STASNDBY:
> +		if (pdata->torch_pin_en)
> +			opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT);
> +		break;
> +
> +	default:
> +		return ret;
> +	}
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to write REG_I_CTRL Register\n");
> +		goto out;
> +	}
> +	ret = regmap_update_bits(chip->regmap, REG_ENABLE,
> +				 MODE_BITS_MASK << MODE_BITS_SHIFT,
> +				 opmode << MODE_BITS_SHIFT);
> +
> +out:
> +	return ret;
> +}
> +
> +/* torch */
> +static void lm3556_torch_brightness_set(struct led_classdev *cdev,
> +					enum led_brightness brightness)
> +{
> +	struct lm3556_chip_data *chip =
> +	    container_of(cdev, struct lm3556_chip_data, cdev_torch);
> +
> +	mutex_lock(&chip->lock);
> +	lm3556_control(chip, brightness, MODES_TORCH);
> +	mutex_unlock(&chip->lock);
> +	return;
> +}
> +
> +/* flash */
> +static void lm3556_strobe_brightness_set(struct led_classdev *cdev,
> +					 enum led_brightness brightness)
> +{
> +	struct lm3556_chip_data *chip =
> +	    container_of(cdev, struct lm3556_chip_data, cdev_flash);
> +
> +	mutex_lock(&chip->lock);
> +	lm3556_control(chip, brightness, MODES_FLASH);
> +	mutex_unlock(&chip->lock);
> +	return;
> +}
> +
> +/* indicator */
> +static void lm3556_indicator_brightness_set(struct led_classdev *cdev,
> +					    enum led_brightness brightness)
> +{
> +	struct lm3556_chip_data *chip =
> +	    container_of(cdev, struct lm3556_chip_data, cdev_indicator);
> +
> +	mutex_lock(&chip->lock);
> +	lm3556_control(chip, brightness, MODES_INDIC);
> +	mutex_unlock(&chip->lock);
> +	return;
> +}
> +
> +static ssize_t lm3556_indicator_pattern_store(struct device *dev,
> +					      struct device_attribute *devAttr,
> +					      const char *buf, size_t size)
> +{
> +	ssize_t ret;
> +	struct i2c_client *client = container_of(dev->parent,
> +						 struct i2c_client, dev);
> +	struct lm3556_chip_data *chip = i2c_get_clientdata(client);
> +	unsigned int state;
> +
> +	ret = kstrtouint(buf, 10, &state);
> +	if (ret)
> +		goto out;
> +	if (state > INDIC_PATTERN_SIZE - 1)
> +		state = INDIC_PATTERN_SIZE - 1;
> +
> +	ret = regmap_write(chip->regmap, REG_INDIC_BLINK,
> +			   indicator_pattern[state].blinking);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to write REG_ENABLE Regisgter\n");
> +		goto out;
> +	}
> +
> +	ret = regmap_write(chip->regmap, REG_INDIC_PERIOD,
> +			   indicator_pattern[state].period_cnt);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to write REG_ENABLE Regisgter\n");
> +		goto out;
> +	}
> +
> +	return size;
> +out:
> +	dev_err(&client->dev, "Indicator pattern doesn't saved\n");
> +	return size;
> +}
> +
> +static DEVICE_ATTR(pattern, 0666, NULL, lm3556_indicator_pattern_store);
> +
> +static const struct regmap_config lm3556_regmap = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +};
> +
> +/* module initialize */
> +static int lm3556_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct lm3556_platform_data *pdata = client->dev.platform_data;
> +	struct lm3556_chip_data *chip;
> +
> +	int err;
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> +		dev_err(&client->dev, "i2c functionality check fail.\n");
> +		return -EOPNOTSUPP;
> +	}
> +
> +	if (pdata == NULL) {
> +		dev_err(&client->dev, "Needs Platform Data.\n");
> +		return -ENODATA;
> +	}
> +
> +	chip =
> +	    devm_kzalloc(&client->dev, sizeof(struct lm3556_chip_data),
> +			 GFP_KERNEL);
> +	if (!chip)
> +		return -ENOMEM;
> +
> +	chip->client = client;
> +	chip->pdata = pdata;
> +
> +	chip->regmap = regmap_init_i2c(client, &lm3556_regmap);
> +	if (IS_ERR(chip->regmap)) {
> +		err = PTR_ERR(chip->regmap);
> +		dev_err(&client->dev, "Failed to allocate register map: %d\n",
> +			err);
> +		return err;
> +	}
> +
> +	mutex_init(&chip->lock);
> +	i2c_set_clientdata(client, chip);
> +
> +	err = lm3556_chip_init(chip);
> +	if (err < 0)
> +		goto err_chip_init;
> +
> +	/* flash */
> +	chip->cdev_flash.name = "flash";
> +	chip->cdev_flash.max_brightness = 16;
> +	chip->cdev_flash.brightness_set = lm3556_strobe_brightness_set;
> +	err = led_classdev_register((struct device *)
> +				    &client->dev, &chip->cdev_flash);
> +	if (err < 0)
> +		goto err_create_flash_file;
> +	/* torch */
> +	chip->cdev_torch.name = "torch";
> +	chip->cdev_torch.max_brightness = 8;
> +	chip->cdev_torch.brightness_set = lm3556_torch_brightness_set;
> +	err = led_classdev_register((struct device *)
> +				    &client->dev, &chip->cdev_torch);
> +	if (err < 0)
> +		goto err_create_torch_file;
> +	/* indicator */
> +	chip->cdev_indicator.name = "indicator";
> +	chip->cdev_indicator.max_brightness = 8;
> +	chip->cdev_indicator.brightness_set = lm3556_indicator_brightness_set;
> +	err = led_classdev_register((struct device *)
> +				    &client->dev, &chip->cdev_indicator);
> +	if (err < 0)
> +		goto err_create_indicator_file;
> +
> +	err = device_create_file(chip->cdev_indicator.dev, &dev_attr_pattern);
> +	if (err < 0)
> +		goto err_create_pattern_file;
> +
> +	dev_info(&client->dev, "LM3556 is initialized\n");
> +	return 0;
> +
> +err_create_pattern_file:
> +	led_classdev_unregister(&chip->cdev_indicator);
> +err_create_indicator_file:
> +	led_classdev_unregister(&chip->cdev_torch);
> +err_create_torch_file:
> +	led_classdev_unregister(&chip->cdev_flash);
> +err_create_flash_file:
> +err_chip_init:
> +	i2c_set_clientdata(client, NULL);

Is calling i2c_set_clientdata() necessary here, since i2c_device_probe()
does it when i2c driver probe routines returns error?

> +	return err;
> +}
> +
> +static int lm3556_remove(struct i2c_client *client)
> +{
> +	struct lm3556_chip_data *chip = i2c_get_clientdata(client);
> +
> +	device_remove_file(chip->cdev_indicator.dev, &dev_attr_pattern);
> +	led_classdev_unregister(&chip->cdev_indicator);
> +	led_classdev_unregister(&chip->cdev_torch);
> +	led_classdev_unregister(&chip->cdev_flash);
> +	regmap_write(chip->regmap, REG_ENABLE, 0);
> +	regmap_exit(chip->regmap);
> +	return 0;
> +}
> +
> +static const struct i2c_device_id lm3556_id[] = {
> +	{LM3556_NAME, 0},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, lm3556_id);
> +
> +static struct i2c_driver lm3556_i2c_driver = {
> +	.driver = {
> +		   .name = LM3556_NAME,
> +		   .owner = THIS_MODULE,
> +		   .pm = NULL,
> +		   },
> +	.probe = lm3556_probe,
> +	.remove = __devexit_p(lm3556_remove),
> +	.id_table = lm3556_id,
> +};
> +
> +static int __init lm3556_init(void)
> +{
> +	return i2c_add_driver(&lm3556_i2c_driver);
> +}
> +
> +static void __exit lm3556_exit(void)
> +{
> +	i2c_del_driver(&lm3556_i2c_driver);
> +}
> +
> +module_init(lm3556_init);
> +module_exit(lm3556_exit);
> +
> +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3556");
> +MODULE_AUTHOR("Daniel Jeong <daniel.jeong@...com>");
> +MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@...il.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/platform_data/leds-lm3556.h b/include/linux/platform_data/leds-lm3556.h
> new file mode 100644
> index 0000000..4b4e7d6
> --- /dev/null
> +++ b/include/linux/platform_data/leds-lm3556.h
> @@ -0,0 +1,50 @@
> +/*
> + * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03)
> + * Copyright (C) 2012 Texas Instruments
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __LINUX_LM3556_H
> +#define __LINUX_LM3556_H
> +
> +#define LM3556_NAME "leds-lm3556"
> +
> +enum lm3556_pin_polarity {
> +	PIN_LOW_ACTIVE = 0,
> +	PIN_HIGH_ACTIVE,
> +};
> +
> +enum lm3556_pin_enable {
> +	PIN_DISABLED = 0,
> +	PIN_ENABLED,
> +};
> +
> +enum lm3556_strobe_usuage {
> +	STROBE_EDGE_DETECT = 0,
> +	STROBE_LEVEL_DETECT,
> +};
> +
> +enum lm3556_indic_mode {
> +	INDIC_MODE_INTERNAL = 0,
> +	INDIC_MODE_EXTERNAL,
> +};
> +
> +struct lm3556_platform_data {
> +	enum lm3556_pin_enable torch_pin_en;
> +	enum lm3556_pin_polarity torch_pin_polarity;
> +
> +	enum lm3556_strobe_usuage strobe_usuage;
> +	enum lm3556_pin_enable strobe_pin_en;
> +	enum lm3556_pin_polarity strobe_pin_polarity;
> +
> +	enum lm3556_pin_enable tx_pin_en;
> +	enum lm3556_pin_polarity tx_pin_polarity;
> +
> +	enum lm3556_indic_mode indicator_mode;
> +};
> +
> +#endif /* __LINUX_LM3556_H */


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ