linux-kernel - Re: [PATCH 0/3 v2] i2c: i801: enable irq

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20120627160121.3c3c3a88@endymion.delvare>
Date:	Wed, 27 Jun 2012 16:01:21 +0200
From:	Jean Delvare <khali@...ux-fr.org>
To:	Daniel Kurtz <djkurtz@...omium.org>
Cc:	ben-linux@...ff.org, seth.heasley@...el.com, ben@...adent.org.uk,
	David.Woodhouse@...el.com, linux-i2c@...r.kernel.org,
	linux-kernel@...r.kernel.org, olofj@...omium.org,
	bleung@...omium.org
Subject: Re: [PATCH 0/3 v2] i2c: i801: enable irq

On Wed, 27 Jun 2012 21:56:34 +0800, Daniel Kurtz wrote:
> On Wed, Jun 27, 2012 at 5:24 PM, Jean Delvare <khali@...ux-fr.org> wrote:
> > I planned on testing this on my ICH3-M system, but it turns out your
> > interrupt-based implementation only works for ICH5 and later chips. As
> > ICH5 and later chips all implement the block buffer, there's no reason
> > for the byte-by-byte-code to ever be used for SMBus block transactions.
> > However, the block buffer feature can be disabled for testing purpose
> > by passing module parameter disable_features=0x0002.
> >
> > I just did, and actually it doesn't work. i2cdump shows 32 bytes no
> > matter what the device said. Debug log shows that the driver reads
> > fewer bytes from the device though, as it is supposed to. So I think
> > the problem is simply that the interrupt path is missing this compared
> > to the polled path:
> >
> >                if (i == 1 && read_write == I2C_SMBUS_READ
> >                 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
> >                        len = inb_p(SMBHSTDAT0(priv));
> >                        (...)
> >                        data->block[0] = len;
> >                }
> >
> > I.e. we don't let the caller know how many bytes we actually read from
> > the device. I fixed it with:
> >
> 
> I was just in the middle of finalizing a new patchset when I saw your
> last email.
> I incorporated (and tested for no-regressions) the snippet below.
> Unfortunately, I'm not set up to test this type of transaction, so
> hopefully you can double check my version of this patch with your
> setup.

Sure, no problem, I will do another full round of testing on the new
patchset.

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/