[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20120627190103.29245704@endymion.delvare>
Date: Wed, 27 Jun 2012 19:01:03 +0200
From: Jean Delvare <khali@...ux-fr.org>
To: Daniel Kurtz <djkurtz@...omium.org>
Cc: Ben Dooks <ben-linux@...ff.org>,
Wolfram Sang <w.sang@...gutronix.de>,
Seth Heasley <seth.heasley@...el.com>,
Olof Johansson <olof@...om.net>,
Benson Leung <bleung@...omium.org>, linux-i2c@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 5/8 v3] i2c: i801: rename some SMBHSTCNT bit constants
On Wed, 27 Jun 2012 21:54:12 +0800, Daniel Kurtz wrote:
> Rename the SMBHSTCNT register bit access constants to match the style of
> other register bits.
>
> Signed-off-by: Daniel Kurtz <djkurtz@...omium.org>
> ---
> drivers/i2c/busses/i2c-i801.c | 21 +++++++++++----------
> 1 files changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index ba56b74..c57bb0c 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -102,9 +102,6 @@
> #define SMBAUXCTL_CRC 1
> #define SMBAUXCTL_E32B 2
>
> -/* kill bit for SMBHSTCNT */
> -#define SMBHSTCNT_KILL 2
> -
> /* Other settings */
> #define MAX_RETRIES 400
> #define ENABLE_INT9 0 /* set to 0x01 to enable - untested */
> @@ -117,9 +114,13 @@
> #define I801_PROC_CALL 0x10 /* unimplemented */
> #define I801_BLOCK_DATA 0x14
> #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
> -#define I801_LAST_BYTE 0x20
> -#define I801_START 0x40
> -#define I801_PEC_EN 0x80 /* ICH3 and later */
> +
> +/* I801 Host Control register bits */
> +#define SMBHSTCNT_INTREN 0x01
> +#define SMBHSTCNT_KILL 0x02
> +#define SMBHSTCNT_LAST_BYTE 0x20
> +#define SMBHSTCNT_START 0x40
> +#define SMBHSTCNT_PEC_EN 0x80 /* ICH3 and later */
>
> /* I801 Hosts Status register bits */
> #define SMBHSTSTS_BYTE_DONE 0x80
> @@ -289,7 +290,7 @@ static int i801_transaction(struct i801_priv *priv, int xact)
>
> /* the current contents of SMBHSTCNT can be overwritten, since PEC,
> * INTREN, SMBSCMD are passed in xact */
> - outb_p(xact | I801_START, SMBHSTCNT(priv));
> + outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
>
> /* We will always wait for a fraction of a second! */
> do {
> @@ -324,7 +325,7 @@ static int i801_block_transaction_by_block(struct i801_priv *priv,
> }
>
> status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 |
> - I801_PEC_EN * hwpec);
> + SMBHSTCNT_PEC_EN * hwpec);
Would be the right time to change this to a saner construct as your
original patch set was doing.
> if (status)
> return status;
>
> @@ -375,11 +376,11 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
>
> for (i = 1; i <= len; i++) {
> if (i == len && read_write == I2C_SMBUS_READ)
> - smbcmd |= I801_LAST_BYTE;
> + smbcmd |= SMBHSTCNT_LAST_BYTE;
> outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
>
> if (i == 1)
> - outb_p(inb(SMBHSTCNT(priv)) | I801_START,
> + outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
> SMBHSTCNT(priv));
>
> /* We will always wait for a fraction of a second! */
Other than this, looks good, applied.
--
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists