| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4FF04F79.4090304@redhat.com>
Date: Sun, 01 Jul 2012 15:24:09 +0200
From: Paolo Bonzini <pbonzini@...hat.com>
To: Cong Meng <mc@...ux.vnet.ibm.com>
CC: Rusty Russell <rusty@...tcorp.com.au>,
"Nicholas A. Bellinger" <nab@...ux-iscsi.org>,
stefanha@...ux.vnet.ibm.com, linuxram@...ibm.com,
Anthony Liguori <anthony@...emonkey.ws>,
senwang@...ux.vnet.ibm.com, zwanp@...ibm.com,
"James E.J. Bottomley" <James.Bottomley@...senPartnership.com>,
virtualization@...ts.linux-foundation.org,
linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org
Subject: Re: [PATCH] virtio-scsi: hotplug suppot for virtio-scsi
Il 20/06/2012 08:55, Cong Meng ha scritto:
> This patch implements the hotplug support for virtio-scsi.
> When there is a device attached/detached, the virtio-scsi driver will be
> signaled via event virtual queue and it will add/remove the scsi device
> in question automatically.
>
> Signed-off-by: Cong Meng <mc@...ux.vnet.ibm.com>
> Signed-off-by: Sen Wang <senwang@...ux.vnet.ibm.com>
Looks good (with one nit below), but please rebase over the four patches
at http://permalink.gmane.org/gmane.linux.kernel/1312496
> ---
> drivers/scsi/virtio_scsi.c | 109 ++++++++++++++++++++++++++++++++++++++++++-
> include/linux/virtio_scsi.h | 9 ++++
> 2 files changed, 116 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
> index 1b38431..6dad625 100644
> --- a/drivers/scsi/virtio_scsi.c
> +++ b/drivers/scsi/virtio_scsi.c
> @@ -25,6 +25,7 @@
> #include <scsi/scsi_cmnd.h>
>
> #define VIRTIO_SCSI_MEMPOOL_SZ 64
> +#define VIRTIO_SCSI_EVENT_LEN 8
>
> /* Command queue element */
> struct virtio_scsi_cmd {
> @@ -43,9 +44,15 @@ struct virtio_scsi_cmd {
> } resp;
> } ____cacheline_aligned_in_smp;
>
> +struct virtio_scsi_event_node {
> + struct virtio_scsi *vscsi;
> + struct virtio_scsi_event event;
> + struct work_struct work;
> +};
> +
> /* Driver instance state */
> struct virtio_scsi {
> - /* Protects ctrl_vq, req_vq and sg[] */
> + /* Protects ctrl_vq, event_vq, req_vq and sg[] */
> spinlock_t vq_lock;
>
> struct virtio_device *vdev;
> @@ -53,6 +60,9 @@ struct virtio_scsi {
> struct virtqueue *event_vq;
> struct virtqueue *req_vq;
>
> + /* Get some buffers reday for event vq */
> + struct virtio_scsi_event_node event_list[VIRTIO_SCSI_EVENT_LEN];
> +
> /* For sglist construction when adding commands to the virtqueue. */
> struct scatterlist sg[];
> };
> @@ -184,9 +194,93 @@ static void virtscsi_ctrl_done(struct virtqueue *vq)
> virtscsi_vq_done(vq, virtscsi_complete_free);
> };
>
> +static int virtscsi_kick_event(struct virtio_scsi *vscsi,
> + struct virtio_scsi_event_node *event_node)
> +{
> + int ret;
> + struct scatterlist sg;
> + unsigned long flags;
> +
> + sg_set_buf(&sg, &event_node->event, sizeof(struct virtio_scsi_event));
> +
> + spin_lock_irqsave(&vscsi->vq_lock, flags);
> +
> + ret = virtqueue_add_buf(vscsi->event_vq, &sg, 0, 1, event_node, GFP_ATOMIC);
> + if (ret >= 0)
> + virtqueue_kick(vscsi->event_vq);
> +
> + spin_unlock_irqrestore(&vscsi->vq_lock, flags);
> +
> + return ret;
> +}
> +
> +static int virtscsi_kick_event_all(struct virtio_scsi *vscsi)
> +{
> + int i;
> +
> + for (i = 0; i < VIRTIO_SCSI_EVENT_LEN; i++) {
> + vscsi->event_list[i].vscsi = vscsi;
> + virtscsi_kick_event(vscsi, &vscsi->event_list[i]);
> + }
> +
> + return 0;
> +}
> +
> +static void virtscsi_handle_transport_reset(struct virtio_scsi *vscsi,
> + struct virtio_scsi_event *event)
> +{
> + struct scsi_device *sdev;
> + struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev);
> + unsigned int target = event->lun[1];
> + unsigned int lun = (event->lun[2] << 8) | event->lun[3];
> +
> + switch (event->reason) {
> + case VIRTIO_SCSI_EVT_RESET_RESCAN:
> + scsi_add_device(shost, 0, target, lun);
> + break;
> + case VIRTIO_SCSI_EVT_RESET_REMOVED:
> + sdev = scsi_device_lookup(shost, 0, target, lun);
> + if (sdev) {
> + scsi_remove_device(sdev);
> + scsi_device_put(sdev);
> + } else {
> + pr_err("SCSI device %d 0 %d %d not found\n",
> + shost->host_no, target, lun);
> + }
> + break;
> + default:
> + pr_info("Unsupport virtio scsi event reason %x\n", event->reason);
> + }
> +}
> +
> +static void virtscsi_handle_event(struct work_struct *work)
> +{
> + struct virtio_scsi_event_node *event_node =
> + container_of(work, struct virtio_scsi_event_node, work);
> + struct virtio_scsi *vscsi = event_node->vscsi;
> + struct virtio_scsi_event *event = &event_node->event;
> +
> + switch (event->event) {
> + case VIRTIO_SCSI_T_TRANSPORT_RESET:
> + virtscsi_handle_transport_reset(vscsi, event);
> + break;
Please handle VIRTIO_SCSI_T_NO_EVENT too here, and mask out
VIRTIO_SCSI_T_EVENTS_MISSED even if you do not handle it by triggering a
full rescan.
Paolo
> + default:
> + pr_err("Unsupport virtio scsi event %x\n", event->event);
> + }
> + virtscsi_kick_event(vscsi, event_node);
> +}
> +
> +static void virtscsi_complete_event(void *buf)
> +{
> + struct virtio_scsi_event_node *event_node = buf;
> +
> + INIT_WORK(&event_node->work, virtscsi_handle_event);
> + schedule_work(&event_node->work);
> +}
> +
> static void virtscsi_event_done(struct virtqueue *vq)
> {
> - virtscsi_vq_done(vq, virtscsi_complete_free);
> + virtscsi_vq_done(vq, virtscsi_complete_event);
> };
>
> static void virtscsi_map_sgl(struct scatterlist *sg, unsigned int *p_idx,
> @@ -435,6 +529,11 @@ static int virtscsi_init(struct virtio_device *vdev,
>
> virtscsi_config_set(vdev, cdb_size, VIRTIO_SCSI_CDB_SIZE);
> virtscsi_config_set(vdev, sense_size, VIRTIO_SCSI_SENSE_SIZE);
> +
> + if (virtio_has_feature(vdev, VIRTIO_SCSI_F_HOTPLUG)) {
> + virtscsi_kick_event_all(vscsi);
> + }
> +
> return 0;
> }
>
> @@ -532,7 +631,13 @@ static struct virtio_device_id id_table[] = {
> { 0 },
> };
>
> +static unsigned int features[] = {
> + VIRTIO_SCSI_F_HOTPLUG
> +};
> +
> static struct virtio_driver virtio_scsi_driver = {
> + .feature_table = features,
> + .feature_table_size = ARRAY_SIZE(features),
> .driver.name = KBUILD_MODNAME,
> .driver.owner = THIS_MODULE,
> .id_table = id_table,
> diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h
> index 8ddeafd..dc8d305 100644
> --- a/include/linux/virtio_scsi.h
> +++ b/include/linux/virtio_scsi.h
> @@ -69,6 +69,10 @@ struct virtio_scsi_config {
> u32 max_lun;
> } __packed;
>
> +/* Feature Bits */
> +#define VIRTIO_SCSI_F_INOUT 0
> +#define VIRTIO_SCSI_F_HOTPLUG 1
> +
> /* Response codes */
> #define VIRTIO_SCSI_S_OK 0
> #define VIRTIO_SCSI_S_OVERRUN 1
> @@ -105,6 +109,11 @@ struct virtio_scsi_config {
> #define VIRTIO_SCSI_T_TRANSPORT_RESET 1
> #define VIRTIO_SCSI_T_ASYNC_NOTIFY 2
>
> +/* Reasons of transport reset event */
> +#define VIRTIO_SCSI_EVT_RESET_HARD 0
> +#define VIRTIO_SCSI_EVT_RESET_RESCAN 1
> +#define VIRTIO_SCSI_EVT_RESET_REMOVED 2
> +
> #define VIRTIO_SCSI_S_SIMPLE 0
> #define VIRTIO_SCSI_S_ORDERED 1
> #define VIRTIO_SCSI_S_HEAD 2
>
Thanks,
Paolo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists