| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <201207021810.46457.hartleys@visionengravers.com>
Date: Mon, 2 Jul 2012 18:10:46 -0700
From: H Hartley Sweeten <hartleys@...ionengravers.com>
To: Linux Kernel <linux-kernel@...r.kernel.org>
CC: <devel@...verdev.osuosl.org>, <abbotti@....co.uk>,
<fmhess@...rs.sourceforge.net>, <gregkh@...uxfoundation.org>
Subject: [PATCH 1/8] staging: comedi: dmm32at: use module_comedi_driver
Convert driver to use the module_comedi_driver() macro to remove
some of the boilerplate.
Move the comedi_driver variable to the end of the file to keep it
with the module_comedi_driver() macro. This also removes the need
for some of the forward declarations. While moving the variable:
1) strip out the unnecessary cut-and-paste skel driver comments
2) add whitespace to improve the readability
3) rename the variable from driver* to *driver
Signed-off-by: H Hartley Sweeten <hsweeten@...ionengravers.com>
Cc: Ian Abbott <abbotti@....co.uk>
Cc: Frank Mori Hess <fmhess@...rs.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/staging/comedi/drivers/dmm32at.c | 63 +++++---------------------------
1 file changed, 10 insertions(+), 53 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index af353167..ad7fef9 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -211,43 +211,6 @@ struct dmm32at_private {
*/
#define devpriv ((struct dmm32at_private *)dev->private)
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int dmm32at_attach(struct comedi_device *dev,
- struct comedi_devconfig *it);
-static void dmm32at_detach(struct comedi_device *dev);
-static struct comedi_driver driver_dmm32at = {
- .driver_name = "dmm32at",
- .module = THIS_MODULE,
- .attach = dmm32at_attach,
- .detach = dmm32at_detach,
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
-/* Most drivers will support multiple types of boards by
- * having an array of board structures. These were defined
- * in dmm32at_boards[] above. Note that the element 'name'
- * was first in the structure -- Comedi uses this fact to
- * extract the name of the board without knowing any details
- * about the structure except for its length.
- * When a device is attached (by comedi_config), the name
- * of the device is given to Comedi, and Comedi tries to
- * match it by going through the list of board names. If
- * there is a match, the address of the pointer is put
- * into dev->board_ptr and driver->attach() is called.
- *
- * Note that these are not necessary if you can determine
- * the type of board in software. ISA PnP, PCI, and PCMCIA
- * devices are such boards.
- */
- .board_name = &dmm32at_boards[0].name,
- .offset = sizeof(struct dmm32at_board),
- .num_names = ARRAY_SIZE(dmm32at_boards),
-};
-
/* prototypes for driver functions below */
static int dmm32at_ai_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -1027,22 +990,16 @@ void dmm32at_setaitimer(struct comedi_device *dev, unsigned int nansec)
}
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __init driver_dmm32at_init_module(void)
-{
- return comedi_driver_register(&driver_dmm32at);
-}
-
-static void __exit driver_dmm32at_cleanup_module(void)
-{
- comedi_driver_unregister(&driver_dmm32at);
-}
-
-module_init(driver_dmm32at_init_module);
-module_exit(driver_dmm32at_cleanup_module);
+static struct comedi_driver dmm32at_driver = {
+ .driver_name = "dmm32at",
+ .module = THIS_MODULE,
+ .attach = dmm32at_attach,
+ .detach = dmm32at_detach,
+ .board_name = &dmm32at_boards[0].name,
+ .offset = sizeof(struct dmm32at_board),
+ .num_names = ARRAY_SIZE(dmm32at_boards),
+};
+module_comedi_driver(dmm32at_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
--
1.7.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists