| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.SOC.1.00.1207050956300.515@math.ut.ee> Date: Thu, 5 Jul 2012 10:00:37 +0300 (EEST) From: Meelis Roos <mroos@...ux.ee> To: Linux Kernel list <linux-kernel@...r.kernel.org>, dri-devel@...ts.freedesktop.org Subject: 3.5-rc5: radeon acceleration regression on Transmeta system In 2.6.32, radeon worked fine. In 3.4, radeon worked with a glitch - window titles were see-throug (not drawn). In 3.5-rc5, radeon driver seems to be more careful and disables acceleration on this system at all. Full dmesg below. Fujitsu Lifebook P series, 256M RAM, 239 usable. [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-rc5-00098-g9e85a6f (mroos@...mat) (gcc version 4.4.5 (Debian 4.4.5-8) ) #61 Thu Jul 5 04:17:43 EEST 2012 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000efdffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000efe0000-0x000000000efefbff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000000efefc00-0x000000000efeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000eff0000-0x000000000f0fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: FUJITSU LifeBook P Series/FJNB164, BIOS Version 1.08 02/24/2005 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xefe0 max_arch_pfn = 0x100000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff] [ 0.000000] Base memory trampoline at [c0098000] 98000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x0efdffff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x0ebfffff] page 2M [ 0.000000] [mem 0x0ec00000-0x0efdffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xefdffff @ [mem 0x017fa000-0x017fffff] [ 0.000000] ACPI: RSDP 000f70a0 00014 (v00 FUJ ) [ 0.000000] ACPI: RSDT 0efedad0 0002C (v01 FUJ MOMUS3 01080000 FUJ 00001000) [ 0.000000] ACPI: FACP 0efefa92 00074 (v01 FUJ MOMUS3 01080000 FUJ 00001000) [ 0.000000] ACPI: DSDT 0efedafc 01F96 (v01 FUJ MOMUS3 01080000 MSFT 01000007) [ 0.000000] ACPI: FACS 0efeffc0 00040 [ 0.000000] ACPI: SSDT 0efefb06 000FA (v01 PTLTD ACPIPST1 00000001 PTL 00000001) [ 0.000000] 239MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0efe0000 [ 0.000000] low ram: 0 - 0efe0000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x0efdffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009bfff] [ 0.000000] node 0: [mem 0x00100000-0x0efdffff] [ 0.000000] On node 0 totalpages: 61292 [ 0.000000] free_area_init_node: node 0, pgdat c12ff888, node_mem_map cee00200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3948 pages, LIFO batch:0 [ 0.000000] Normal zone: 448 pages used for memmap [ 0.000000] Normal zone: 56864 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xff08 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] e820: [mem 0x0f100000-0xffefffff] available for PCI devices [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60812 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-rc5-00098-g9e85a6f root=/dev/sda1 ro debug radeon.modeset=1 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 239300k/245632k available (2103k kernel code, 5868k reserved, 984k data, 284k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) [ 0.000000] vmalloc : 0xcf7e0000 - 0xfffe2000 ( 776 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcefe0000 ( 239 MB) [ 0.000000] .init : 0xc1305000 - 0xc134c000 ( 284 kB) [ 0.000000] .data : 0xc120de7e - 0xc13040c0 ( 984 kB) [ 0.000000] .text : 0xc1000000 - 0xc120de7e (2103 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] CPU 0 irqstacks, hard=ce806000 soft=ce808000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 793.245 MHz processor. [ 0.020034] Calibrating delay loop (skipped), value calculated using timer frequency.. 1586.49 BogoMIPS (lpj=7932450) [ 0.020283] pid_max: default: 32768 minimum: 301 [ 0.021593] Security Framework initialized [ 0.021900] Mount-cache hash table entries: 512 [ 0.038591] Initializing cgroup subsys blkio [ 0.042141] CPU: Processor revision 1.4.1.0, 800 MHz [ 0.042290] CPU: Code Morphing Software revision 4.3.2-9-566 [ 0.042399] CPU: 20030108 13:03 official release 28.0.3-4.3.2#1 [ 0.042734] CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 stepping 03 [ 0.044291] ACPI: Core revision 20120320 [ 0.093271] ACPI: setting ELCR to 0200 (from 0c00) [ 0.101539] Performance Events: [ 0.115702] PM: Registering ACPI NVS region [mem 0x0efefc00-0x0efeffff] (1024 bytes) [ 0.121209] NET: Registered protocol family 16 [ 0.145615] ACPI: bus type pci registered [ 0.171379] PCI: PCI BIOS revision 2.10 entry at 0xfd8ae, last bus=1 [ 0.171513] PCI: Using configuration type 1 for base access [ 0.295302] bio: create slab <bio-0> at 0 [ 0.297567] ACPI: Added _OSI(Module Device) [ 0.297986] ACPI: Added _OSI(Processor Device) [ 0.298098] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.298192] ACPI: Added _OSI(Processor Aggregator Device) [ 0.303575] ACPI: EC: Look up EC in DSDT [ 0.347351] ACPI: Interpreter enabled [ 0.347521] ACPI: (supports S0 S3 S4 S5) [ 0.348070] ACPI: Using PIC for interrupt routing [ 0.411673] ACPI: Power Resource [USBP] (on) [ 0.430747] ACPI: EC: GPE = 0x0, I/O: command/status = 0x66, data = 0x62 [ 0.432793] ACPI: No dock devices found. [ 0.432985] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.441759] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.453184] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.453409] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.453581] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.453745] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000e7fff] (ignored) [ 0.453917] pci_root PNP0A03:00: host bridge window [mem 0x0f100000-0xffefffff] (ignored) [ 0.454044] PCI: root bus 00: using default resources [ 0.455496] PCI host bridge to bus 0000:00 [ 0.455828] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.455982] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.456188] pci 0000:00:00.0: [1279:0395] type 00 class 0x060000 [ 0.456734] pci 0000:00:00.0: reg 10: [mem 0xe8100000-0xe81fffff] [ 0.457639] pci 0000:00:00.1: [1279:0396] type 00 class 0x050000 [ 0.459685] pci 0000:00:00.2: [1279:0397] type 00 class 0x050000 [ 0.461085] pci 0000:00:02.0: [10b9:5237] type 00 class 0x0c0310 [ 0.461656] pci 0000:00:02.0: reg 10: [mem 0xe8010000-0xe8010fff] [ 0.463397] pci 0000:00:04.0: [10b9:5451] type 00 class 0x040100 [ 0.464555] pci 0000:00:04.0: reg 10: [io 0x1000-0x10ff] [ 0.464754] pci 0000:00:04.0: reg 14: [mem 0xe8011000-0xe8011fff] [ 0.465523] pci 0000:00:04.0: supports D1 D2 [ 0.465759] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold [ 0.466565] pci 0000:00:06.0: [10b9:7101] type 00 class 0x068000 [ 0.466857] pci 0000:00:06.0: quirk: [io 0xff00-0xff3f] claimed by ali7101 ACPI [ 0.467025] pci 0000:00:06.0: quirk: [io 0xff80-0xff9f] claimed by ali7101 SMB [ 0.467263] pci 0000:00:07.0: [10b9:1533] type 00 class 0x060100 [ 0.468090] pci 0000:00:0c.0: [104c:ac50] type 02 class 0x060700 [ 0.468256] pci 0000:00:0c.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.469312] pci 0000:00:0c.0: supports D1 D2 [ 0.469505] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.470204] pci 0000:00:0f.0: [10b9:5229] type 00 class 0x0101ee [ 0.470377] pci 0000:00:0f.0: reg 18: [io 0x0170-0x0177] [ 0.470638] pci 0000:00:0f.0: reg 1c: [io 0x0374-0x0377] [ 0.470804] pci 0000:00:0f.0: reg 20: [io 0x1800-0x180f] [ 0.471123] pci 0000:00:10.0: [10ec:8139] type 00 class 0x020000 [ 0.471266] pci 0000:00:10.0: reg 10: [io 0x8000-0x80ff] [ 0.471381] pci 0000:00:10.0: reg 14: [mem 0xe8012000-0xe80120ff] [ 0.471542] pci 0000:00:10.0: supports D1 D2 [ 0.471795] pci 0000:00:10.0: PME# supported from D1 D2 D3hot D3cold [ 0.472663] pci 0000:00:12.0: [1260:3873] type 00 class 0x028000 [ 0.472815] pci 0000:00:12.0: reg 10: [mem 0xe8013000-0xe8013fff pref] [ 0.473131] pci 0000:00:12.0: supports D1 D2 [ 0.473352] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot [ 0.473713] pci 0000:00:14.0: [1002:4c59] type 00 class 0x030000 [ 0.473849] pci 0000:00:14.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.474002] pci 0000:00:14.0: reg 14: [io 0x1400-0x14ff] [ 0.474505] pci 0000:00:14.0: reg 18: [mem 0xe8000000-0xe800ffff] [ 0.475176] pci 0000:00:14.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.475315] pci 0000:00:14.0: supports D1 D2 [ 0.476190] pci_bus 0000:00: on NUMA node 0 [ 0.476310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.477639] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.490894] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11) [ 0.493250] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11) [ 0.496402] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11) *0, disabled. [ 0.498552] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11) [ 0.501014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11) [ 0.504631] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11) *0, disabled. [ 0.506908] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11) *0, disabled. [ 0.508373] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11) [ 0.511603] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7 10 *11) [ 0.514308] vgaarb: device added: PCI:0000:00:14.0,decodes=io+mem,owns=io+mem,locks=none [ 0.514815] vgaarb: loaded [ 0.514892] vgaarb: bridge control possible 0000:00:14.0 [ 0.517519] SCSI subsystem initialized [ 0.518727] libata version 3.00 loaded. [ 0.520365] PCI: Using ACPI for IRQ routing [ 0.520707] PCI: pci_cache_line_size set to 32 bytes [ 0.523404] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff] [ 0.523504] e820: reserve RAM buffer [mem 0x0efe0000-0x0fffffff] [ 0.527307] Switching to clocksource pit [ 0.529513] pnp: PnP ACPI init [ 0.529694] ACPI: bus type pnp registered [ 0.529694] pnp 00:00: [bus 00-ff] [ 0.529694] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.529694] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.529694] pnp 00:00: [io 0x0d00-0xffff window] [ 0.529694] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.529694] pnp 00:00: [mem 0x000d0000-0x000e7fff window] [ 0.529694] pnp 00:00: [mem 0x0f100000-0xffefffff window] [ 0.529694] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.529694] pnp 00:01: [io 0x0072-0x0073] [ 0.529694] pnp 00:01: [io 0x0080] [ 0.529703] pnp 00:01: [io 0x0092] [ 0.529784] pnp 00:01: [io 0x00b0-0x00b3] [ 0.529863] pnp 00:01: [io 0x00ea-0x00eb] [ 0.529942] pnp 00:01: [io 0x040b] [ 0.530023] pnp 00:01: [io 0x0480-0x048f] [ 0.530101] pnp 00:01: [io 0x04d0-0x04d1] [ 0.530179] pnp 00:01: [io 0x04d6] [ 0.530258] pnp 00:01: [io 0xf800-0xf87f] [ 0.530338] pnp 00:01: [io 0xf880-0xf8ff] [ 0.530419] pnp 00:01: [io 0xfd60-0xfd67] [ 0.530499] pnp 00:01: [io 0xfe00] [ 0.530580] pnp 00:01: [io 0xff00-0xff3f] [ 0.530660] pnp 00:01: [io 0xff80-0xff9f] [ 0.532304] system 00:01: [io 0x040b] has been reserved [ 0.532853] system 00:01: [io 0x0480-0x048f] has been reserved [ 0.533213] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.540130] system 00:01: [io 0x04d6] has been reserved [ 0.540225] system 00:01: [io 0xf800-0xf87f] has been reserved [ 0.540312] system 00:01: [io 0xf880-0xf8ff] has been reserved [ 0.540597] system 00:01: [io 0xfd60-0xfd67] has been reserved [ 0.540805] system 00:01: [io 0xfe00] has been reserved [ 0.540901] system 00:01: [io 0xff00-0xff3f] has been reserved [ 0.540994] system 00:01: [io 0xff80-0xff9f] has been reserved [ 0.541107] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.541603] pnp 00:02: [io 0x0000-0x000f] [ 0.541769] pnp 00:02: [io 0x0081-0x008f] [ 0.542033] pnp 00:02: [io 0x00c0-0x00df] [ 0.542122] pnp 00:02: [dma 4] [ 0.542928] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.543271] pnp 00:03: [io 0x00f0-0x00fe] [ 0.543374] pnp 00:03: [irq 13] [ 0.543794] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.544304] pnp 00:04: [io 0x0070-0x0071] [ 0.544409] pnp 00:04: [irq 8] [ 0.545001] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.545390] pnp 00:05: [io 0x0061] [ 0.546014] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.546554] pnp 00:06: [irq 12] [ 0.547001] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.547615] pnp 00:07: [io 0x0060] [ 0.547784] pnp 00:07: [io 0x0064] [ 0.547876] pnp 00:07: [irq 1] [ 0.548318] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.550850] pnp: PnP ACPI: found 8 devices [ 0.550953] ACPI: ACPI bus type pnp unregistered [ 0.614042] Switching to clocksource acpi_pm [ 0.614647] pci 0000:00:0c.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.614782] pci 0000:00:0c.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.614889] pci 0000:00:0c.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.614991] pci 0000:00:0c.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.615186] pci 0000:00:0c.0: BAR 0: assigned [mem 0x10000000-0x10000fff] [ 0.615504] pci 0000:00:0c.0: BAR 9: assigned [mem 0x14000000-0x17ffffff pref] [ 0.616052] pci 0000:00:0c.0: BAR 10: assigned [mem 0x18000000-0x1bffffff] [ 0.616193] pci 0000:00:14.0: BAR 6: assigned [mem 0x10020000-0x1003ffff pref] [ 0.617156] pci 0000:00:0c.0: BAR 7: assigned [io 0x1c00-0x1cff] [ 0.617397] pci 0000:00:0c.0: BAR 8: assigned [io 0x2000-0x20ff] [ 0.617519] pci 0000:00:0c.0: CardBus bridge to [bus 01-04] [ 0.617599] pci 0000:00:0c.0: bridge window [io 0x1c00-0x1cff] [ 0.617686] pci 0000:00:0c.0: bridge window [io 0x2000-0x20ff] [ 0.617778] pci 0000:00:0c.0: bridge window [mem 0x14000000-0x17ffffff pref] [ 0.617890] pci 0000:00:0c.0: bridge window [mem 0x18000000-0x1bffffff] [ 0.619203] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.619311] PCI: setting IRQ 10 as level-triggered [ 0.619442] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.619523] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.619607] pci_bus 0000:01: resource 0 [io 0x1c00-0x1cff] [ 0.619680] pci_bus 0000:01: resource 1 [io 0x2000-0x20ff] [ 0.619760] pci_bus 0000:01: resource 2 [mem 0x14000000-0x17ffffff pref] [ 0.619838] pci_bus 0000:01: resource 3 [mem 0x18000000-0x1bffffff] [ 0.620322] NET: Registered protocol family 2 [ 0.623647] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.627144] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.627600] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.627936] TCP: Hash tables configured (established 8192 bind 8192) [ 0.628027] TCP: reno registered [ 0.628124] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.628495] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.630596] NET: Registered protocol family 1 [ 0.631124] pci 0000:00:02.0: power state changed by ACPI to D0 [ 0.631231] pci 0000:00:02.0: power state changed by ACPI to D0 [ 0.632229] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 11 [ 0.632330] PCI: setting IRQ 11 as level-triggered [ 0.690897] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 0.691080] pci 0000:00:14.0: Boot video device [ 0.691172] PCI: CLS 32 bytes, default 32 [ 0.698723] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.703380] msgmni has been set to 467 [ 0.705277] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.705417] io scheduler noop registered [ 0.705551] io scheduler cfq registered (default) [ 0.707289] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.713311] pata_ali 0000:00:0f.0: can't derive routing for PCI INT A [ 0.713424] pata_ali 0000:00:0f.0: PCI INT A: no GSI [ 0.713493] [ 0.718390] scsi0 : pata_ali [ 0.720305] scsi1 : pata_ali [ 0.721375] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14 [ 0.721484] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x374 bmdma 0x1808 irq 15 [ 0.724647] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.727897] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.728034] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.730046] mousedev: PS/2 mouse device common for all mice [ 0.731241] rtc_cmos 00:04: RTC can wake from S4 [ 0.733019] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.733225] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.733527] cpuidle: using governor ladder [ 0.733614] cpuidle: using governor menu [ 0.742895] TCP: cubic registered [ 0.743008] NET: Registered protocol family 17 [ 0.743606] Key type dns_resolver registered [ 0.752037] rtc_cmos 00:04: setting system clock to 2012-07-05 05:32:14 UTC (1341466334) [ 0.772265] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.384194] ata1.00: ATA-4: TOSHIBA MK6014MAP, N2.14 G, max UDMA/66 [ 1.384377] ata1.00: 11733120 sectors, multi 16: LBA [ 1.402773] ata1.00: configured for UDMA/66 [ 1.408845] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6014MA N2.1 PQ: 0 ANSI: 5 [ 1.412622] sd 0:0:0:0: [sda] 11733120 512-byte logical blocks: (6.00 GB/5.59 GiB) [ 1.416328] sd 0:0:0:0: [sda] Write Protect is off [ 1.416449] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.418440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.690446] Refined TSC clocksource calibration: 793.226 MHz. [ 1.690788] Switching to clocksource tsc [ 1.922803] sda: sda1 sda2 < sda5 > [ 1.971289] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.025718] kjournald starting. Commit interval 5 seconds [ 2.027704] EXT3-fs (sda1): mounted filesystem with writeback data mode [ 2.028168] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 2.033706] Freeing unused kernel memory: 284k freed [ 2.037306] Write protecting the kernel text: 2104k [ 2.037528] Write protecting the kernel read-only data: 804k [ 9.470599] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 9.479199] Linux agpgart interface v0.103 [ 9.508425] ACPI: AC Adapter [AC] (on-line) [ 9.515317] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 9.515499] ACPI: Battery Slot [CMB1] (battery present) [ 9.518358] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 9.518729] ACPI: Power Button [PWRB] [ 9.519442] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 9.519955] ACPI: Lid Switch [LID] [ 9.521240] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 9.521421] ACPI: Power Button [PWRF] [ 10.425726] Marking TSC unstable due to TSC halts in idle [ 10.426177] ACPI: acpi_idle registered with cpuidle [ 10.433737] Switching to clocksource acpi_pm [ 10.526655] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/FUJ02B1:00/input/input4 [ 10.526968] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on) [ 10.535226] fujitsu_laptop: driver 0.6.0 successfully loaded [ 10.634201] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 10.765315] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 10.765597] 8139cp 0000:00:10.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 11.177717] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 11.189874] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 11.195012] 8139too 0000:00:10.0: eth0: RealTek RTL8139 at 0xcf7fc000, 00:0b:5d:48:63:fb, IRQ 10 [ 11.296360] ali1535_smbus 0000:00:06.0: enabling device (0000 -> 0001) [ 11.331111] ACPI: bus type usb registered [ 11.331822] usbcore: registered new interface driver usbfs [ 11.332200] usbcore: registered new interface driver hub [ 11.378908] usbcore: registered new device driver usb [ 11.636828] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 11.654296] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6 [ 11.690237] yenta_cardbus 0000:00:0c.0: CardBus bridge found [10cf:10c6] [ 11.690462] yenta_cardbus 0000:00:0c.0: adjusting diagnostic: 41 -> 61 [ 11.690576] yenta_cardbus 0000:00:0c.0: Using CSCINT to route CSC interrupts to PCI [ 11.690682] yenta_cardbus 0000:00:0c.0: Routing CardBus interrupts to PCI [ 11.690782] yenta_cardbus 0000:00:0c.0: TI: mfunc 0x00c61d22, devctl 0x46 [ 11.791867] apanel: unknown device 11 found [ 11.943919] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x08f8, PCI irq 10 [ 11.950948] yenta_cardbus 0000:00:0c.0: Socket status: 30000006 [ 12.093912] cfg80211: Calling CRDA to update world regulatory domain [ 12.322813] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 12.323361] ohci_hcd 0000:00:02.0: power state changed by ACPI to D0 [ 12.323546] ohci_hcd 0000:00:02.0: power state changed by ACPI to D0 [ 12.324551] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 12.324880] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 12.325380] ohci_hcd 0000:00:02.0: irq 11, io mem 0xe8010000 [ 12.385161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.385375] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.385524] usb usb1: Product: OHCI Host Controller [ 12.385631] usb usb1: Manufacturer: Linux 3.5.0-rc5-00098-g9e85a6f ohci_hcd [ 12.385740] usb usb1: SerialNumber: 0000:00:02.0 [ 12.387147] hub 1-0:1.0: USB hub found [ 12.387465] hub 1-0:1.0: 3 ports detected [ 12.731337] usb 1-3: new low-speed USB device number 2 using ohci_hcd [ 12.781008] orinoco 0.15 (David Gibson <hermes@...son.dropbear.id.au>, Pavel Roskin <proski@....org>, et al) [ 12.830261] Error: Driver 'pcspkr' is already registered, aborting... [ 12.913309] usb 1-3: New USB device found, idVendor=0430, idProduct=0508 [ 12.913431] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.913520] usb 1-3: Product: USB Touch Panel [ 12.913594] usb 1-3: Manufacturer: Fujitsu Takamisawa [ 12.929992] [drm] Initialized drm 1.1.0 20060810 [ 13.131830] orinoco_pci 0.15 (Pavel Roskin <proski@....org>, David Gibson <hermes@...son.dropbear.id.au> & Jean Tourrilhes <jt@....hp.com>) [ 13.139002] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [ 14.090815] orinoco_pci 0000:00:12.0: Hardware identity 8013:0000:0001:0000 [ 14.091063] orinoco_pci 0000:00:12.0: Station identity 001f:0001:0001:0004 [ 14.091151] orinoco_pci 0000:00:12.0: Firmware determined as Intersil 1.4.1 [ 14.091227] orinoco_pci 0000:00:12.0: Ad-hoc demo mode supported [ 14.091299] orinoco_pci 0000:00:12.0: IEEE standard IBSS ad-hoc mode supported [ 14.091398] orinoco_pci 0000:00:12.0: WEP supported, 104-bit key [ 14.444900] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 14.445939] excluding 0xc0000-0xcffff 0xe8000-0xfffff [ 14.450332] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 14.451528] clean. [ 14.454732] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 14.454937] clean. [ 14.520360] lib80211: common routines for IEEE802.11 drivers [ 14.520523] lib80211_crypt: registered algorithm 'NULL' [ 14.970756] usbcore: registered new interface driver usbhid [ 14.970908] usbhid: USB HID core driver [ 15.164302] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 15.301057] input: Fujitsu Takamisawa USB Touch Panel as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.0/input/input7 [ 15.302309] hid-generic 0003:0430:0508.0001: input,hidraw0: USB HID v1.00 Mouse [Fujitsu Takamisawa USB Touch Panel] on usb-0000:00:02.0-3/input0 [ 15.881213] [drm] radeon kernel modesetting enabled. [ 20.188866] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 [ 20.196126] [drm] initializing kernel modesetting (RV100 0x1002:0x4C59 0x10CF:0x11C8). [ 20.197349] [drm] register mmio base: 0xE8000000 [ 20.197442] [drm] register mmio size: 65536 [ 20.200966] radeon 0000:00:14.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (8M used) [ 20.201124] radeon 0000:00:14.0: GTT: 512M 0x00000000D0000000 - 0x00000000EFFFFFFF [ 20.201386] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 20.201471] [drm] Driver supports precise vblank timestamp query. [ 20.201712] [drm] radeon: irq initialized. [ 20.201803] [drm] Detected VRAM RAM=128M, BAR=128M [ 20.201879] [drm] RAM width 32bits DDR [ 20.305506] [TTM] Zone kernel: Available graphics memory: 119792 kiB [ 20.305610] [TTM] Initializing pool allocator [ 20.306407] [drm] radeon: 8M of VRAM memory ready [ 20.306512] [drm] radeon: 512M of GTT memory ready. [ 20.307206] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 20.343886] [drm] PCI GART of 512M enabled (table at 0x000000000D480000). [ 20.345063] radeon 0000:00:14.0: WB disabled [ 20.345207] radeon 0000:00:14.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xceaca000 [ 20.345709] [drm] Loading R100 Microcode [ 20.542930] [drm] radeon: ring at 0x00000000D0001000 [ 20.710779] [drm:r100_ring_test] *ERROR* radeon: ring test failed (scratch(0x15E4)=0xCAFEDEAD) [ 20.711162] [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22). [ 20.711261] radeon 0000:00:14.0: failed initializing CP (-22). [ 20.711339] radeon 0000:00:14.0: Disabling GPU acceleration [ 20.876370] [drm:r100_cp_fini] *ERROR* Wait for CP idle timeout, shutting down CP. [ 20.884008] [drm] radeon: cp finalized [ 20.885280] radeon 0000:00:14.0: cd968c00 unpin not necessary [ 20.892713] [drm] Panel ID String: Toshiba LTM07C382 XSGA [ 20.892827] [drm] Panel Size 1024x600 [ 20.905158] [drm] radeon legacy LVDS backlight initialized [ 20.905272] [drm] Radeon Display Connectors [ 20.905342] [drm] Connector 0: [ 20.905410] [drm] VGA-1 [ 20.905480] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 20.905548] [drm] Encoders: [ 20.905613] [drm] CRT1: INTERNAL_DAC1 [ 20.905681] [drm] Connector 1: [ 20.905746] [drm] LVDS-1 [ 20.905805] [drm] Encoders: [ 20.905872] [drm] LCD1: INTERNAL_LVDS [ 21.053621] [drm] fb mappable at 0xF0040000 [ 21.053720] [drm] vram apper at 0xF0000000 [ 21.053780] [drm] size 614400 [ 21.053838] [drm] fb depth is 8 [ 21.053895] [drm] pitch is 1024 [ 21.054308] fbcon: radeondrmfb (fb0) is primary device [ 21.141202] Console: switching to colour frame buffer device 128x37 [ 21.148690] fb0: radeondrmfb frame buffer device [ 21.148842] drm: registered panic notifier [ 21.149053] [drm] Initialized radeon 2.17.0 20080528 for 0000:00:14.0 on minor 0 [ 24.053066] Adding 305196k swap on /dev/sda5. Priority:-1 extents:1 across:305196k [ 24.635020] EXT3-fs (sda1): using internal journal [ 25.283203] loop: module loaded [ 29.418184] 8139too 0000:00:10.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 40.521817] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8 [ 45.384034] Bluetooth: Core ver 2.16 [ 45.387260] NET: Registered protocol family 31 [ 45.390291] Bluetooth: HCI device and connection manager initialized [ 45.393200] Bluetooth: HCI socket layer initialized [ 45.396075] Bluetooth: L2CAP socket layer initialized [ 45.398988] Bluetooth: SCO socket layer initialized [ 45.530408] Bluetooth: RFCOMM TTY layer initialized [ 45.533374] Bluetooth: RFCOMM socket layer initialized [ 45.536185] Bluetooth: RFCOMM ver 1.11 [ 46.475693] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 46.479178] Bluetooth: BNEP filters: protocol multicast [ 47.510590] NET: Registered protocol family 10 [ 47.792722] Bridge firewalling registered [ 59.527042] sshd (1391): /proc/1391/oom_adj is deprecated, please use /proc/1391/oom_score_adj instead. -- Meelis Roos (mroos@...ux.ee) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists