| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1341564974-16885-1-git-send-email-yadi.brar@samsung.com>
Date: Fri, 6 Jul 2012 14:26:14 +0530
From: Yadwinder Singh Brar <yadi.brar01@...il.com>
To: linux-kernel@...r.kernel.org
Cc: sameo@...ux.intel.com,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Liam Girdwood <lrg@...com>,
Jonghwa Lee <jonghwa3.lee@...sung.com>,
Myungjoo Ham <myungjoo.ham@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Chiwoong Byun <woong.byun@...sung.com>,
Yadwinder Singh Brar <yadi.brar@...sung.com>
Subject: [PATCH v2] mfd: max77686: Add device tree support.
This patch adds device tree support for mfd driver and adds
Documentation/devicetree/bindings/mfd/max77686.txt
Signed-off-by: Yadwinder Singh Brar <yadi.brar@...sung.com>
---
Documentation/devicetree/bindings/mfd/max77686.txt | 59 ++++++++++++++++++++
drivers/mfd/max77686.c | 43 +++++++++++++--
2 files changed, 97 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/max77686.txt
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
new file mode 100644
index 0000000..c6a3469
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -0,0 +1,59 @@
+Maxim MAX77686 multi-function device
+
+MAX77686 is a Mulitifunction device with PMIC, RTC and Charger on chip. It is
+interfaced to host controller using i2c interface. PMIC and Charger submodules
+are addressed using same i2c slave address whereas RTC submodule uses
+different i2c slave address,presently for which we are statically creating i2c
+client while probing.This document describes the binding for mfd device and
+PMIC submodule.
+
+Required properties:
+- compatible : Must be "maxim,max77686";
+- reg : Specifies the i2c slave address of PMIC block.
+- interrupts : This i2c device has an IRQ line connected to the main SoC.
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- voltage-regulators : The regulators of max77686 have to be instantiated
+ under subnode named "voltage-regulators" using the following format.
+
+ regulator_name {
+ regulator-compatible = LDOn/BUCKn
+ standard regulator constraints....
+ };
+ refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ The regulator-compatible property of regulator should initialized with string
+to get matched with their hardware counterparts as follow:
+
+ -LDOn : for LDOs, where n can lie in range 1 to 26.
+ example: LDO1, LDO2, LDO26.
+ -BUCKn : for BUCKs, where n can lie in range 1 to 9.
+ example: BUCK1, BUCK5, BUCK9.
+
+Example:
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo11_reg {
+ regulator-compatible = "LDO11";
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-always-on;
+ };
+
+ buck1_reg {
+ regulator-compatible = "BUCK1";
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ }
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index 5c78e94..21bc8c5 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -35,6 +35,11 @@
#define I2C_ADDR_RTC (0x0C >> 1)
+static struct of_device_id __devinitdata max77686_pmic_dt_match[] = {
+ {.compatible = "maxim,max77686", .data = 0},
+ {},
+};
+
static struct mfd_cell max77686_devs[] = {
{ .name = "max77686-pmic", },
{ .name = "max77686-rtc", },
@@ -45,6 +50,29 @@ static struct regmap_config max77686_regmap_config = {
.val_bits = 8,
};
+#ifdef CONFIG_OF
+static struct max77686_platform_data *max77686_i2c_parse_dt_pdata(struct device
+ *dev)
+{
+ struct max77686_platform_data *pd;
+
+ pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ dev_err(dev, "could not allocate memory for pdata\n");
+ return NULL;
+ }
+
+ dev->platform_data = pd;
+ return pd;
+}
+#else
+static struct max77686_platform_data *max77686_i2c_parse_dt_pdata(struct device
+ *dev)
+{
+ return 0;
+}
+#endif
+
static int max77686_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -53,6 +81,15 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
unsigned int data;
int ret = 0;
+ if (i2c->dev.of_node)
+ pdata = max77686_i2c_parse_dt_pdata(&i2c->dev);
+
+ if (!pdata) {
+ ret = -EIO;
+ dev_err(&i2c->dev, "No platform data found.\n");
+ goto err;
+ }
+
max77686 = kzalloc(sizeof(struct max77686_dev), GFP_KERNEL);
if (max77686 == NULL)
return -ENOMEM;
@@ -71,11 +108,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
max77686->i2c = i2c;
max77686->type = id->driver_data;
- if (!pdata) {
- ret = -EIO;
- goto err;
- }
-
max77686->wakeup = pdata->wakeup;
max77686->irq_gpio = pdata->irq_gpio;
max77686->irq = i2c->irq;
@@ -133,6 +165,7 @@ static struct i2c_driver max77686_i2c_driver = {
.driver = {
.name = "max77686",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(max77686_pmic_dt_match),
},
.probe = max77686_i2c_probe,
.remove = max77686_i2c_remove,
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists