| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4FFBC1D0.5030506@ti.com>
Date: Tue, 10 Jul 2012 11:16:56 +0530
From: Rajendra Nayak <rnayak@...com>
To: Kishon Vijay Abraham I <kishon@...com>
CC: grant.likely@...retlab.ca, rob.herring@...xeda.com,
rob@...dley.net, linux@....linux.org.uk,
gregkh@...uxfoundation.org, b-cousson@...com, tony@...mide.com,
devicetree-discuss@...ts.ozlabs.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
balbi@...com, linux-omap@...r.kernel.org,
linux-usb@...r.kernel.org, hvaibhav@...com
Subject: Re: [PATCH v1 01/11] drivers: usb: otg: add a new driver for omap
usb2 phy
> diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
> new file mode 100644
> index 0000000..80a28c9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
> @@ -0,0 +1,16 @@
> +OMAP USB PHY
> +
> +OMAP USB2 PHY
> +
> +Required properties:
> + - compatible: Should be "ti,omap-usb2"
> + - reg : Address and length of the register set for the device. Also
> +add the address of control module dev conf register until a driver for
> +control module is added
> +
> +This is usually a subnode of ocp2scp to which it is connected.
> +
> +usb2phy@...a0ad080 {
> + compatible = "ti,omap-usb2";
> + reg =<0x4a0ad080 0x58>;
Don;t you need a 'ti,hwmods' entry for this one?
> --- /dev/null
> +++ b/drivers/usb/otg/omap-usb2.c
> @@ -0,0 +1,273 @@
> +/*
> + * omap-usb2.c - USB PHY, talking to musb controller in OMAP.
> + *
> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
Copyright (C) 2012? Same for the couple of headers below.
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Author: Kishon Vijay Abraham I<kishon@...com>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +
> +static int __devinit omap_usb2_probe(struct platform_device *pdev)
> +{
> + struct omap_usb *phy;
> + struct usb_otg *otg;
> + struct resource *res;
> +
> + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy) {
> + dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
> + return -ENOMEM;
> + }
> +
> + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
> + if (!otg) {
> + dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
> + return -ENOMEM;
> + }
> +
> + phy->dev =&pdev->dev;
> +
> + phy->phy.dev = phy->dev;
> + phy->phy.label = "omap-usb2";
> + phy->phy.set_suspend = omap_usb2_suspend;
> + phy->phy.otg = otg;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +
> + phy->control_dev_conf = devm_request_and_ioremap(&pdev->dev, res);
> + if (phy->control_dev_conf == NULL) {
> + dev_err(&pdev->dev, "Failed to obtain io memory\n");
> + return -ENXIO;
> + }
> +
> + phy->is_suspended = 1;
> + omap_usb_phy_power(phy, 0);
> +
> + otg->set_host = omap_usb_set_host;
> + otg->set_peripheral = omap_usb_set_peripheral;
> + otg->set_vbus = omap_usb_set_vbus;
> + otg->start_srp = omap_usb_start_srp;
> + otg->phy =&phy->phy;
> +
> + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
Why not just use clk_get()? What does devm_clk_get() do?
> + if (IS_ERR(phy->wkupclk)) {
> + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
> + return PTR_ERR(phy->wkupclk);
> + }
> + clk_prepare(phy->wkupclk);
Ideally clk_prepare() is an extension of clk_enable() and is expected
to be used that way. Not to be clubbed with clk_get(). Same with
clk_unprepare(). Do you do a clk_enable()/_disable() in interrupt/
atomic context?
> +
> + usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2);
> +
> + platform_set_drvdata(pdev, phy);
> +
> + pm_runtime_enable(phy->dev);
> +
> + return 0;
> +}
> +
> +static int __devexit omap_usb2_remove(struct platform_device *pdev)
> +{
> + struct omap_usb *phy = platform_get_drvdata(pdev);
> +
> + clk_unprepare(phy->wkupclk);
> + usb_remove_phy(&phy->phy);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +
> +static int omap_usb2_runtime_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct omap_usb *phy = platform_get_drvdata(pdev);
> +
> + clk_disable(phy->wkupclk);
> +
> + return 0;
> +}
> +
> +static int omap_usb2_runtime_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct omap_usb *phy = platform_get_drvdata(pdev);
> +
> + clk_enable(phy->wkupclk);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops omap_usb2_pm_ops = {
> + SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
> + NULL)
> +};
> +
> +#define DEV_PM_OPS (&omap_usb2_pm_ops)
> +#else
> +#define DEV_PM_OPS NULL
> +#endif
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id omap_usb2_id_table[] = {
> + { .compatible = "ti,omap-usb2" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
> +#else
> +#define omap_usb2_id_table NULL;
> +#endif
> +
> +static struct platform_driver omap_usb2_driver = {
> + .probe = omap_usb2_probe,
> + .remove = __devexit_p(omap_usb2_remove),
> + .driver = {
> + .name = "omap-usb2",
> + .owner = THIS_MODULE,
> + .pm = DEV_PM_OPS,
> + .of_match_table = omap_usb2_id_table,
Use of_match_ptr() instead.
regards,
Rajendra
> + },
> +};
> +
> +static int __init usb2_omap_init(void)
> +{
> + return platform_driver_register(&omap_usb2_driver);
> +}
> +arch_initcall(usb2_omap_init);
> +
> +static void __exit usb2_omap_exit(void)
> +{
> + platform_driver_unregister(&omap_usb2_driver);
> +}
> +module_exit(usb2_omap_exit);
> +
> +MODULE_ALIAS("platform: omap_usb2");
> +MODULE_AUTHOR("Texas Instruments Inc.");
> +MODULE_DESCRIPTION("OMAP USB2 PHY DRIVER");
> +MODULE_LICENSE("GPLv2");
> diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h
> new file mode 100644
> index 0000000..ebcbca6
> --- /dev/null
> +++ b/include/linux/usb/omap_usb.h
> @@ -0,0 +1,45 @@
> +/*
> + * omap_usb.h -- omap usb2 phy header file
> + *
> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Author: Kishon Vijay Abraham I<kishon@...com>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __DRIVERS_OMAP_USB2_H
> +#define __DRIVERS_OMAP_USB2_H
> +
> +#include<linux/usb/otg.h>
> +
> +struct omap_usb {
> + struct usb_phy phy;
> + struct phy_companion *comparator;
> + struct device *dev;
> + u32 __iomem *control_dev_conf;
> + struct clk *wkupclk;
> + u8 is_suspended:1;
> +};
> +
> +#define PHY_PD 0x1
> +
> +#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy)
> +
> +#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
> +void omap_usb2_set_comparator(struct phy_companion *comparator);
> +#else
> +static inline void omap_usb2_set_comparator(struct phy_companion *comparator)
> +{
> +}
> +#endif
> +
> +#endif /* __DRIVERS_OMAP_USB_H */
> diff --git a/include/linux/usb/phy_companion.h b/include/linux/usb/phy_companion.h
> new file mode 100644
> index 0000000..321290f
> --- /dev/null
> +++ b/include/linux/usb/phy_companion.h
> @@ -0,0 +1,34 @@
> +/*
> + * phy-companion.h -- phy companion to indicate the comparator part of PHY
> + *
> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Author: Kishon Vijay Abraham I<kishon@...com>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __DRIVERS_PHY_COMPANION_H
> +#define __DRIVERS_PHY_COMPANION_H
> +
> +#include<linux/usb/otg.h>
> +
> +/* phy_companion to take care of VBUS, ID and srp capabilities */
> +struct phy_companion {
> +
> + /* effective for A-peripheral, ignored for B devices */
> + int (*set_vbus)(struct phy_companion *x, bool enabled);
> +
> + /* for B devices only: start session with A-Host */
> + int (*start_srp)(struct phy_companion *x);
> +};
> +
> +#endif /* __DRIVERS_PHY_COMPANION_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists