| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120710092403.GF3049@piware.de>
Date: Tue, 10 Jul 2012 11:24:03 +0200
From: Martin Pitt <martin.pitt@...ntu.com>
To: "James E.J. Bottomley" <JBottomley@...allels.com>,
linux-scsi@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH 1/1] [SCSI] scsi_debug: Add "removable" parameter
Add "removable" module parameter to set the "removable" attribute of any
subsequently created debug block device. It is a writable driver option, so
that you can switch between removable and "fixed" media block devices in
between the add_host calls.
This is useful for being able to test the different behaviour/required
privileges in e. g. the udisks test suite.
Signed-off-by: Martin Pitt <martin.pitt@...ntu.com>
Acked-By: David Zeuthen <zeuthen@...il.com>
---
drivers/scsi/scsi_debug.c | 30 +++++++++++++++++++++++++++---
1 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 182d5a5..57fbd5a 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -109,6 +109,7 @@ static const char * scsi_debug_version_date = "20100324";
#define DEF_OPT_BLKS 64
#define DEF_PHYSBLK_EXP 0
#define DEF_PTYPE 0
+#define DEF_REMOVABLE false
#define DEF_SCSI_LEVEL 5 /* INQUIRY, byte2 [5->SPC-3] */
#define DEF_SECTOR_SIZE 512
#define DEF_UNMAP_ALIGNMENT 0
@@ -193,11 +194,11 @@ static unsigned int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY;
static unsigned int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS;
static unsigned int scsi_debug_unmap_max_desc = DEF_UNMAP_MAX_DESC;
static unsigned int scsi_debug_write_same_length = DEF_WRITESAME_LENGTH;
+static bool scsi_debug_removable = DEF_REMOVABLE;
static int scsi_debug_cmnd_count = 0;
#define DEV_READONLY(TGT) (0)
-#define DEV_REMOVEABLE(TGT) (0)
static unsigned int sdebug_store_sectors;
static sector_t sdebug_capacity; /* in sectors */
@@ -919,7 +920,7 @@ static int resp_inquiry(struct scsi_cmnd * scp, int target,
return ret;
}
/* drops through here for a standard inquiry */
- arr[1] = DEV_REMOVEABLE(target) ? 0x80 : 0; /* Removable disk */
+ arr[1] = scsi_debug_removable ? 0x80 : 0; /* Removable disk */
arr[2] = scsi_debug_scsi_level;
arr[3] = 2; /* response_data_format==2 */
arr[4] = SDEBUG_LONG_INQ_SZ - 5;
@@ -1211,7 +1212,7 @@ static int resp_format_pg(unsigned char * p, int pcontrol, int target)
p[11] = sdebug_sectors_per & 0xff;
p[12] = (scsi_debug_sector_size >> 8) & 0xff;
p[13] = scsi_debug_sector_size & 0xff;
- if (DEV_REMOVEABLE(target))
+ if (scsi_debug_removable)
p[20] |= 0x20; /* should agree with INQUIRY */
if (1 == pcontrol)
memset(p + 2, 0, sizeof(format_pg) - 2);
@@ -2754,6 +2755,7 @@ module_param_named(opt_blks, scsi_debug_opt_blks, int, S_IRUGO);
module_param_named(opts, scsi_debug_opts, int, S_IRUGO | S_IWUSR);
module_param_named(physblk_exp, scsi_debug_physblk_exp, int, S_IRUGO);
module_param_named(ptype, scsi_debug_ptype, int, S_IRUGO | S_IWUSR);
+module_param_named(removable, scsi_debug_removable, bool, S_IRUGO | S_IWUSR);
module_param_named(scsi_level, scsi_debug_scsi_level, int, S_IRUGO);
module_param_named(sector_size, scsi_debug_sector_size, int, S_IRUGO);
module_param_named(unmap_alignment, scsi_debug_unmap_alignment, int, S_IRUGO);
@@ -2796,6 +2798,7 @@ MODULE_PARM_DESC(opt_blks, "optimal transfer length in block (def=64)");
MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)");
MODULE_PARM_DESC(physblk_exp, "physical block exponent (def=0)");
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
+MODULE_PARM_DESC(removable, "claim to have removable media (def=0)");
MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])");
MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
MODULE_PARM_DESC(unmap_alignment, "lowest aligned thin provisioning lba (def=0)");
@@ -3205,6 +3208,25 @@ static ssize_t sdebug_map_show(struct device_driver *ddp, char *buf)
}
DRIVER_ATTR(map, S_IRUGO, sdebug_map_show, NULL);
+static ssize_t sdebug_removable_show(struct device_driver *ddp,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_removable ? 1 : 0);
+}
+static ssize_t sdebug_removable_store(struct device_driver *ddp,
+ const char *buf, size_t count)
+{
+ int n;
+
+ if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
+ scsi_debug_removable = (n > 0);
+ return count;
+ }
+ return -EINVAL;
+}
+DRIVER_ATTR(removable, S_IRUGO | S_IWUSR, sdebug_removable_show,
+ sdebug_removable_store);
+
/* Note: The following function creates attribute files in the
/sys/bus/pseudo/drivers/scsi_debug directory. The advantage of these
@@ -3230,6 +3252,7 @@ static int do_create_driverfs_files(void)
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_removable);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno);
@@ -3255,6 +3278,7 @@ static void do_remove_driverfs_files(void)
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_scsi_level);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_opts);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_ptype);
+ driver_remove_file(&sdebug_driverfs_driver, &driver_attr_removable);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_parts);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_no_uld);
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists