[ 0.000000] Linux version 3.5.0-rc6+ (wfg@bee) (gcc version 4.7.0 (Debian 4.7.1-1) ) #16 Tue Jul 10 17:23:51 CST 2012 [ 0.000000] Command line: rcutorture.rcutorture_runnable=0 trinity=10m tree=mm:akpm auth_hashtable_size=10 sunrpc.auth_hashtable_size=10 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2012-07-10-17-24-27-mm-origin.akpm-81aee07-46a7146-x86_64-randconfig-mm2-1-slim BOOT_IMAGE=kernel-tests/kernels/x86_64-randconfig-mm2/46a7146478b4526950011838a0e249ddf594ef7c/vmlinuz-3.5.0-rc6+ [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093bff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000093c00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffcfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffd000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xfffd max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdac0-0x000fdacf] mapped at [ffff8800000fdac0] [ 0.000000] mpc: fdad0-fdbec [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff88000008d000] 8d000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x0fffcfff] [ 0.000000] [mem 0x00000000-0x0fdfffff] page 2M [ 0.000000] [mem 0x0fe00000-0x0fffcfff] page 4k [ 0.000000] kernel direct mapping tables up to 0xfffcfff @ [mem 0x0e854000-0x0e8d5fff] [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 127912(97%) [ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fda70 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffdbd0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000ffffe40 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffde40 01FB7 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000ffffe00 00040 [ 0.000000] ACPI: SSDT 000000000fffdd40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000fffdc50 0007A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000fffdc10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 12 and 11 [ 0.000000] kvm-clock: cpu 0, msr 0:1d598c1, boot clock [ 0.000000] Section 1 and 0 (node 0) have a circular dependency on usemap and pgdat allocations [ 0.000000] [ffffea0000000000-ffffea00003fffff] PMD -> [ffff88000d400000-ffff88000d7fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00092fff] [ 0.000000] node 0: [mem 0x00100000-0x0fffcfff] [ 0.000000] On node 0 totalpages: 65408 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3901 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 960 pages used for memmap [ 0.000000] DMA32 zone: 60477 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000093000 - 0000000000094000 [ 0.000000] PM: Registered nosave memory: 0000000000094000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64378 [ 0.000000] Kernel command line: rcutorture.rcutorture_runnable=0 trinity=10m tree=mm:akpm auth_hashtable_size=10 sunrpc.auth_hashtable_size=10 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2012-07-10-17-24-27-mm-origin.akpm-81aee07-46a7146-x86_64-randconfig-mm2-1-slim BOOT_IMAGE=kernel-tests/kernels/x86_64-randconfig-mm2/46a7146478b4526950011838a0e249ddf594ef7c/vmlinuz-3.5.0-rc6+ [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 208972k/262132k available (10508k kernel code, 500k absent, 52660k reserved, 3962k data, 680k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2999.462 MHz processor [ 0.004000] Calibrating delay loop (skipped) preset value.. 5998.92 BogoMIPS (lpj=11997848) [ 0.005755] pid_max: default: 32768 minimum: 301 [ 0.008057] Security Framework initialized [ 0.009779] AppArmor: AppArmor initialized [ 0.012025] Mount-cache hash table entries: 256 [ 0.014314] Disabled fast string operations [ 0.016027] mce: CPU supports 10 MCE banks [ 0.017783] CPU: Intel Common KVM processor stepping 01 [ 0.037445] ACPI: Core revision 20120518 [ 0.042323] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.045976] Getting VERSION: 50014 [ 0.048013] Getting VERSION: 50014 [ 0.049532] Getting ID: 0 [ 0.052013] Getting ID: ff000000 [ 0.053463] Getting LVT0: 8700 [ 0.054869] Getting LVT1: 8400 [ 0.056070] enabled ExtINT on CPU#0 [ 0.058683] ENABLING IO-APIC IRQs [ 0.060011] init IO_APIC IRQs [ 0.061396] apic 2 pin 0 not connected [ 0.064013] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.067243] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.068025] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.072023] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.076023] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.080023] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.083197] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.084023] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.088024] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.092024] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.096024] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.100024] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.103237] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.104025] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.108025] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.112023] apic 2 pin 16 not connected [ 0.113662] apic 2 pin 17 not connected [ 0.116008] apic 2 pin 18 not connected [ 0.117632] apic 2 pin 19 not connected [ 0.120008] apic 2 pin 20 not connected [ 0.121643] apic 2 pin 21 not connected [ 0.124008] apic 2 pin 22 not connected [ 0.125692] apic 2 pin 23 not connected [ 0.127504] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.128009] Using local APIC timer interrupts. [ 0.128009] calibrating APIC timer ... [ 0.136007] ... lapic delta = 6250005 [ 0.136007] ... PM-Timer delta = 357955 [ 0.136007] ... PM-Timer result ok [ 0.136007] ..... delta 6250005 [ 0.136007] ..... mult: 268418894 [ 0.136007] ..... calibration result: 4000003 [ 0.136007] ..... CPU clock speed is 2999.1870 MHz. [ 0.136007] ..... host bus clock speed is 1000.0003 MHz. [ 0.137134] EVM: security.capability [ 0.139606] dummy: [ 0.140105] NET: Registered protocol family 16 [ 0.142926] i2c-core: driver [dummy] registered [ 0.144310] ACPI: bus type pci registered [ 0.148102] PCI: Using configuration type 1 for base access [ 0.157987] bio: create slab at 0 [ 0.160106] i2c-core: driver [max7300] registered [ 0.162634] i2c-core: driver [mcp230xx] registered [ 0.164022] i2c-core: driver [pca953x] registered [ 0.168027] i2c-core: driver [pcf857x] registered [ 0.170537] i2c-core: driver [sx150x] registered [ 0.172063] ACPI: Added _OSI(Module Device) [ 0.174356] ACPI: Added _OSI(Processor Device) [ 0.176013] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.180013] ACPI: Added _OSI(Processor Aggregator Device) [ 0.184027] ACPI: EC: Look up EC in DSDT [ 0.191552] ACPI: Interpreter enabled [ 0.192012] ACPI: (supports S0 S4 S5) [ 0.196017] ACPI: Using IOAPIC for interrupt routing [ 0.205053] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.208045] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.212042] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.216015] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.219590] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.220015] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 0.224017] PCI: root bus 00: using default resources [ 0.228051] PCI host bridge to bus 0000:00 [ 0.229855] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 0.232016] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.236017] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.240017] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff] [ 0.243058] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.244553] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.248768] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.252456] pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f] [ 0.254918] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.256672] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.260032] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.264269] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.272100] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref] [ 0.276116] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff] [ 0.287489] pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref] [ 0.288349] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.292400] pci 0000:00:03.0: reg 10: [mem 0xf2020000-0xf203ffff] [ 0.296378] pci 0000:00:03.0: reg 14: [io 0xc040-0xc07f] [ 0.302199] pci 0000:00:03.0: reg 30: [mem 0xf2040000-0xf205ffff pref] [ 0.304332] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.308179] pci 0000:00:04.0: reg 10: [io 0xc080-0xc0bf] [ 0.310551] pci 0000:00:04.0: reg 14: [mem 0xf2060000-0xf2060fff] [ 0.312987] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.316213] pci 0000:00:05.0: reg 10: [io 0xc0c0-0xc0ff] [ 0.318780] pci 0000:00:05.0: reg 14: [mem 0xf2061000-0xf2061fff] [ 0.320982] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.324203] pci 0000:00:06.0: reg 10: [io 0xc100-0xc13f] [ 0.326760] pci 0000:00:06.0: reg 14: [mem 0xf2062000-0xf2062fff] [ 0.328987] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.332207] pci 0000:00:07.0: reg 10: [io 0xc140-0xc17f] [ 0.336126] pci 0000:00:07.0: reg 14: [mem 0xf2063000-0xf2063fff] [ 0.340144] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.342561] pci 0000:00:08.0: reg 10: [io 0xc180-0xc1bf] [ 0.344127] pci 0000:00:08.0: reg 14: [mem 0xf2064000-0xf2064fff] [ 0.348516] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.351343] pci 0000:00:09.0: reg 10: [io 0xc1c0-0xc1ff] [ 0.352129] pci 0000:00:09.0: reg 14: [mem 0xf2065000-0xf2065fff] [ 0.356947] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.359754] pci 0000:00:0a.0: reg 10: [mem 0xf2066000-0xf206600f] [ 0.361023] pci_bus 0000:00: on NUMA node 0 [ 0.364081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.370114] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x18) [ 0.389699] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.392975] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.396123] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.399605] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.401754] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 [ 0.405461] i2c-core: driver [ad5398] registered [ 0.408072] i2c-core: driver [max1586] registered [ 0.410259] i2c-core: driver [max8660] registered [ 0.412068] i2c-core: driver [tps62360] registered [ 0.414021] i2c-core: driver [tps65023] registered [ 0.416166] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.420034] vgaarb: loaded [ 0.421521] vgaarb: bridge control possible 0000:00:02.0 [ 0.424118] i2c-core: driver [stmpe-i2c] registered [ 0.426368] i2c-core: driver [tc3589x] registered [ 0.428042] i2c-core: driver [wm831x] registered [ 0.430230] i2c-core: driver [tps6105x] registered [ 0.432033] tps65010: version 2 May 2005 [ 0.433735] i2c-core: driver [tps65010] registered [ 0.436044] i2c-core: driver [tps65010] unregistered [ 0.452050] i2c-core: driver [tps65010] registered [ 0.454698] i2c-core: driver [tps65010] unregistered [ 0.472051] i2c-core: driver [tps65010] registered [ 0.474953] i2c-core: driver [tps65010] unregistered [ 0.476031] tps65010: no chip? [ 0.480054] i2c-core: driver [tps6507x] registered [ 0.483354] i2c-core: driver [tps65912] registered [ 0.484047] i2c-core: driver [da903x] registered [ 0.488041] i2c-core: driver [da9052] registered [ 0.490214] i2c-core: driver [max8997] registered [ 0.492046] i2c-core: driver [max8998] registered [ 0.496042] i2c-core: driver [pcf50633] registered [ 0.498292] i2c-core: driver [tps6586x] registered [ 0.500052] i2c-core: driver [tps65090] registered [ 0.502278] i2c-core: driver [palmas] registered [ 0.504050] i2c-core: driver [rc5t583] registered [ 0.506222] i2c-core: driver [s5m87xx] registered [ 0.508047] i2c-core: driver [lm3533] registered [ 0.512211] SCSI subsystem initialized [ 0.513957] ACPI: bus type usb registered [ 0.515749] usbcore: registered new interface driver usbfs [ 0.516059] usbcore: registered new interface driver hub [ 0.520146] usbcore: registered new device driver usb [ 0.528115] i2c-core: driver [tca8418_keypad] registered [ 0.530673] PCI: Using ACPI for IRQ routing [ 0.532046] PCI: pci_cache_line_size set to 64 bytes [ 0.534534] e820: reserve RAM buffer [mem 0x00093c00-0x0009ffff] [ 0.536042] e820: reserve RAM buffer [mem 0x0fffd000-0x0fffffff] [ 0.540298] irda_init() [ 0.541581] NET: Registered protocol family 23 [ 0.544566] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.547381] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.549365] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.556152] Switching to clocksource kvm-clock [ 0.558563] AppArmor: AppArmor Filesystem Enabled [ 0.558563] pnp: PnP ACPI init [ 0.560178] ACPI: bus type pnp registered [ 0.562162] pnp 00:00: [bus 00-ff] [ 0.563901] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.565908] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.568107] pnp 00:00: [io 0x0d00-0xffff window] [ 0.570284] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.572970] pnp 00:00: [mem 0xe0000000-0xfebfffff window] [ 0.575426] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.578400] pnp 00:01: [io 0x0070-0x0071] [ 0.580393] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.583877] pnp 00:01: [irq 8] [ 0.585510] pnp 00:01: [io 0x0072-0x0077] [ 0.587523] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.590431] pnp 00:02: [io 0x0060] [ 0.592383] pnp 00:02: [io 0x0064] [ 0.594290] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.598041] pnp 00:02: [irq 1] [ 0.599514] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.602204] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.605797] pnp 00:03: [irq 12] [ 0.607462] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.610371] pnp 00:04: [io 0x03f2-0x03f5] [ 0.612549] pnp 00:04: [io 0x03f7] [ 0.614440] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.618205] pnp 00:04: [irq 6] [ 0.619818] pnp 00:04: [dma 2] [ 0.621454] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.624416] pnp 00:05: [io 0x0378-0x037f] [ 0.626404] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.630095] pnp 00:05: [irq 7] [ 0.631798] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.635180] pnp 00:06: [io 0x03f8-0x03ff] [ 0.637196] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.640927] pnp 00:06: [irq 4] [ 0.642369] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.645384] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 0.647644] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.650436] pnp: PnP ACPI: found 8 devices [ 0.653090] ACPI: ACPI bus type pnp unregistered [ 0.661544] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.664067] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff] [ 0.666923] NET: Registered protocol family 2 [ 0.669054] IP route cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.672504] TCP established hash table entries: 8192 (order: 5, 131072 bytes) [ 0.675990] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.678872] TCP: Hash tables configured (established 8192 bind 8192) [ 0.681648] TCP: reno registered [ 0.683305] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.685921] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.688723] NET: Registered protocol family 1 [ 0.690510] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.693835] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.696428] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.699153] pci 0000:00:02.0: Boot video device [ 0.701425] PCI: CLS 0 bytes, default 64 [ 0.703480] Unpacking initramfs... [ 1.403760] Freeing initrd memory: 23656k freed [ 1.430045] Machine check injector initialized [ 1.432180] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 1.436785] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 1.439643] audit: initializing netlink socket (disabled) [ 1.441926] type=2000 audit(1341912457.440:1): initialized [ 1.444612] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.456627] NTFS driver 2.1.30 [Flags: R/O DEBUG]. [ 1.459392] QNX4 filesystem 0.2.3 registered. [ 1.461542] QNX6 filesystem 1.0.0 registered. [ 1.464519] GFS2 installed [ 1.466070] msgmni has been set to 454 [ 1.468495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.471841] io scheduler noop registered [ 1.473526] io scheduler deadline registered (default) [ 1.476000] xz_dec_test: module loaded [ 1.477882] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it. [ 1.482331] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.484926] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.487838] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.490798] acpiphp: Slot [1] registered [ 1.492511] acpiphp: Slot [2] registered [ 1.494601] acpiphp: Slot [3] registered [ 1.496597] acpiphp: Slot [4] registered [ 1.498532] acpiphp: Slot [5] registered [ 1.500513] acpiphp: Slot [6] registered [ 1.502481] acpiphp: Slot [7] registered [ 1.504460] acpiphp: Slot [8] registered [ 1.506439] acpiphp: Slot [9] registered [ 1.508409] acpiphp: Slot [10] registered [ 1.510391] acpiphp: Slot [11] registered [ 1.512145] acpiphp: Slot [12] registered [ 1.514402] acpiphp: Slot [13] registered [ 1.516411] acpiphp: Slot [14] registered [ 1.518395] acpiphp: Slot [15] registered [ 1.520414] acpiphp: Slot [16] registered [ 1.522400] acpiphp: Slot [17] registered [ 1.524403] acpiphp: Slot [18] registered [ 1.526345] acpiphp: Slot [19] registered [ 1.528078] acpiphp: Slot [20] registered [ 1.530050] acpiphp: Slot [21] registered [ 1.531850] acpiphp: Slot [22] registered [ 1.533625] acpiphp: Slot [23] registered [ 1.535638] acpiphp: Slot [24] registered [ 1.537652] acpiphp: Slot [25] registered [ 1.539636] acpiphp: Slot [26] registered [ 1.541640] acpiphp: Slot [27] registered [ 1.543650] acpiphp: Slot [28] registered [ 1.545696] acpiphp: Slot [29] registered [ 1.547693] acpiphp: Slot [30] registered [ 1.549684] acpiphp: Slot [31] registered [ 1.551838] i2c-core: driver [lp855x] registered [ 1.553804] rivafb_setup START [ 1.555428] nvidiafb_setup START [ 1.557317] usbcore: registered new interface driver smscufx [ 1.559947] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.563502] ACPI: Power Button [PWRF] [ 1.568694] i2c-core: driver [LP3971] registered [ 1.570903] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 1.573013] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.601742] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.630762] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.633067] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 1.635720] ac.o: No PCI boards found. [ 1.637598] ac.o: For an ISA board you must supply memory and irq parameters. [ 1.640722] Generic RTC Driver v1.07 [ 1.642575] Non-volatile memory driver v1.3 [ 1.644633] ppdev: user-space parallel port driver [ 1.646890] smapi::smapi_init, ERROR invalid usSmapiID [ 1.649221] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 1.652958] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 1.655941] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 1.658262] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.662238] Hangcheck: Using getrawmonotonic(). [ 1.664482] [drm] Initialized drm 1.1.0 20060810 [ 1.666731] [drm] radeon defaulting to userspace modesetting. [ 1.669695] i2c-core: driver [ch7006] using legacy suspend method [ 1.672108] i2c-core: driver [ch7006] using legacy resume method [ 1.674331] i2c-core: driver [ch7006] registered [ 1.677224] loop: module loaded [ 1.678667] HP CISS Driver (v 3.6.26) [ 1.680783] nbd: registered device at major 43 [ 1.683950] 'Low Performance USB Block' driver is deprecated. Please switch to usb-storage [ 1.687848] usbcore: registered new interface driver ub [ 1.691392] drbd: initialized. Version: 8.3.13 (api:88/proto:86-96) [ 1.693795] drbd: built-in [ 1.695307] drbd: registered as block device major 147 [ 1.697684] drbd: minor_table @ 0xffff880007bc7148 [ 1.699625] mtip32xx Version 1.2.6os3 [ 1.701317] Error creating debugfs parent [ 1.703136] i2c-core: driver [ad_dpot] registered [ 1.705326] i2c-core: driver [bh1770glc] registered [ 1.707646] i2c-core: driver [apds9802als] using legacy suspend method [ 1.710097] i2c-core: driver [apds9802als] using legacy resume method [ 1.712543] i2c-core: driver [apds9802als] registered [ 1.714916] i2c-core: driver [isl29003] using legacy suspend method [ 1.717721] i2c-core: driver [isl29003] using legacy resume method [ 1.725787] i2c-core: driver [isl29003] registered [ 1.728024] i2c-core: driver [isl29020] registered [ 1.730250] i2c-core: driver [tsl2550] using legacy suspend method [ 1.732606] i2c-core: driver [tsl2550] using legacy resume method [ 1.735271] i2c-core: driver [tsl2550] registered [ 1.737489] i2c-core: driver [hmc6352] registered [ 1.739459] i2c-core: driver [at24] registered [ 1.741353] i2c-core: driver [htcpld-chip] registered [ 1.743691] i2c-core: driver [twl6040] registered [ 1.745916] Driver for timberdale has been successfully registered. [ 1.748849] Loading iSCSI transport class v2.0-870. [ 1.751276] emc: device handler registered [ 1.753180] fnic: Cisco FCoE HBA Driver, ver 1.5.0.2 [ 1.755700] bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.12 (Jun 04, 2012) [ 1.759483] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 1.762306] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0 [ 1.765252] iscsi: registered transport (qla4xxx) [ 1.767458] QLogic iSCSI HBA Driver [ 1.769256] mpt2sas version 13.100.00.00 loaded [ 1.771398] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 1.774239] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 1.777793] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 1.780565] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 1.784231] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. [ 1.787258] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010) [ 1.789853] iscsi: registered transport (cxgb4i) [ 1.791866] osst :I: Tape driver with OnStream support version 0.99.4 [ 1.791866] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 1.800836] scsi_debug: host protection [ 1.802782] scsi0 : scsi_debug, version 1.82 [20100324], dev_size_mb=8, opts=0x0 [ 1.806629] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0004 PQ: 0 ANSI: 5 [ 1.810416] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 1.813480] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.816496] D-Link DE-620 pocket adapter not identified in the printer port [ 1.820305] libphy: Fixed MDIO Bus: probed [ 1.822434] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012) [ 1.826078] cxgb4vf: could not create debugfs entry, continuing [ 1.828751] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 1.831279] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 1.833531] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.0.1-k [ 1.836288] igb: Copyright (c) 2007-2012 Intel Corporation. [ 1.838410] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.9.15-k [ 1.842042] ixgbe: Copyright (c) 1999-2012 Intel Corporation. [ 1.844621] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.6.0-k [ 1.848824] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.851518] usbcore: registered new interface driver irda-usb [ 1.853739] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. [ 1.856491] usbcore: registered new interface driver kaweth [ 1.858910] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 1.862097] usbcore: registered new interface driver pegasus [ 1.864657] usbcore: registered new interface driver ipheth [ 1.867448] aoe: AoE v47 initialised. [ 1.869326] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.871944] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 1.874943] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.877674] ohci_hcd: block sizes: ed 80 td 96 [ 1.879792] usbcore: registered new interface driver usblp [ 1.882275] usbcore: registered new interface driver cdc_wdm [ 1.884829] usbcore: registered new interface driver uas [ 1.887246] usbcore: registered new interface driver libusual [ 1.889830] usbcore: registered new interface driver mdc800 [ 1.892091] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 1.895820] usbcore: registered new interface driver usbserial [ 1.898413] usbserial: USB Serial Driver core [ 1.900497] usbcore: registered new interface driver aircable [ 1.902889] USB Serial support registered for aircable [ 1.905267] usbcore: registered new interface driver ark3116 [ 1.907808] USB Serial support registered for ark3116 [ 1.910139] usbcore: registered new interface driver usb_debug [ 1.912410] USB Serial support registered for debug [ 1.914490] usbcore: registered new interface driver io_edgeport [ 1.917170] USB Serial support registered for Edgeport 2 port adapter [ 1.919778] USB Serial support registered for Edgeport 4 port adapter [ 1.922283] USB Serial support registered for Edgeport 8 port adapter [ 1.925117] USB Serial support registered for EPiC device [ 1.927558] usbcore: registered new interface driver garmin_gps [ 1.930193] USB Serial support registered for Garmin GPS usb/tty [ 1.932503] usbcore: registered new interface driver ipaq [ 1.934810] USB Serial support registered for PocketPC PDA [ 1.937330] usbcore: registered new interface driver ir_usb [ 1.939838] USB Serial support registered for IR Dongle [ 1.942001] ir_usb: v0.5:USB IR Dongle driver [ 1.944105] usbcore: registered new interface driver iuu_phoenix [ 1.946766] USB Serial support registered for iuu_phoenix [ 1.949090] usbcore: registered new interface driver keyspan [ 1.951345] USB Serial support registered for Keyspan - (without firmware) [ 1.954361] USB Serial support registered for Keyspan 1 port adapter [ 1.957161] USB Serial support registered for Keyspan 2 port adapter [ 1.959928] USB Serial support registered for Keyspan 4 port adapter [ 1.962476] usbcore: registered new interface driver keyspan_pda [ 1.965192] USB Serial support registered for Keyspan PDA [ 1.967681] USB Serial support registered for Keyspan PDA - (prerenumeration) [ 1.970733] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) [ 1.973961] usbcore: registered new interface driver mos7720 [ 1.976522] USB Serial support registered for Moschip 2 port adapter [ 1.979152] usbcore: registered new interface driver mos7840 [ 1.981433] USB Serial support registered for Moschip 7840/7820 USB Serial Driver [ 1.985016] usbcore: registered new interface driver moto_modem [ 1.987649] USB Serial support registered for moto-modem [ 1.990063] usbcore: registered new interface driver omninet [ 1.992291] USB Serial support registered for ZyXEL - omni.net lcd plus usb [ 1.994941] usbcore: registered new interface driver pl2303 [ 1.997467] USB Serial support registered for pl2303 [ 1.999761] usbcore: registered new interface driver qcaux [ 2.002237] USB Serial support registered for qcaux [ 2.004529] usbcore: registered new interface driver qcserial [ 2.007097] USB Serial support registered for Qualcomm USB modem [ 2.009519] usbcore: registered new interface driver quatech2 [ 2.011786] USB Serial support registered for Quatech 2nd gen USB to Serial Driver [ 2.015162] safe_serial: v0.1:USB Safe Encapsulated Serial [ 2.017663] usbcore: registered new interface driver safe_serial [ 2.020313] USB Serial support registered for safe_serial [ 2.022557] usbcore: registered new interface driver siemens_mpi [ 2.025282] USB Serial support registered for siemens_mpi [ 2.027742] usbcore: registered new interface driver sierra [ 2.030261] USB Serial support registered for Sierra USB modem [ 2.032511] usbcore: registered new interface driver spcp8x5 [ 2.035148] USB Serial support registered for SPCP8x5 [ 2.037489] usbcore: registered new interface driver visor [ 2.039677] USB Serial support registered for Handspring Visor / Palm OS [ 2.042385] USB Serial support registered for Sony Clie 5.0 [ 2.044895] USB Serial support registered for Sony Clie 3.5 [ 2.047399] usbcore: registered new interface driver cypress_cy7c63 [ 2.050191] usbcore: registered new interface driver cytherm [ 2.052410] usbcore: registered new interface driver legousbtower [ 2.054887] usbcore: registered new interface driver rio500 [ 2.057434] usbcore: registered new interface driver usbtest [ 2.059992] usbcore: registered new interface driver uss720 [ 2.062498] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 2.066703] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 2.069870] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 2.073003] uss720: If you just want to connect to a printer, use usblp instead [ 2.076525] usbcore: registered new interface driver usbsevseg [ 2.079112] usbcore: registered new interface driver yurex [ 2.081594] i2c-core: driver [isp1301] registered [ 2.083819] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.088693] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.090967] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.093008] parkbd: no such parport [ 2.094948] mousedev: PS/2 mouse device common for all mice [ 2.097518] i2c-core: driver [adp5589_keys] registered [ 2.100026] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.104253] i2c-core: driver [mcs_touchkey] registered [ 2.106639] i2c-core: driver [qt1070] registered [ 2.108869] usbcore: registered new interface driver appletouch [ 2.111395] usbcore: registered new interface driver bcm5974 [ 2.116099] i2c-core: driver [synaptics_i2c] registered [ 2.118477] usbcore: registered new interface driver synaptics_usb [ 2.123537] i2c-core: driver [as5011] registered [ 2.125867] i2c-core: driver [mma8450] registered [ 2.128070] i2c-core: driver [mpu3050] registered [ 2.130261] usbcore: registered new interface driver powermate [ 2.132554] i2c-core: driver [smbus_alert] registered [ 2.134900] i2c /dev entries driver [ 2.136798] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 2.140217] i2c-dev: adapter [SMBus PIIX4 adapter at b100] registered as minor 0 [ 2.143727] i2c i2c-0: adapter [SMBus PIIX4 adapter at b100] registered [ 2.146769] usbcore: registered new interface driver i2c-diolan-u2c [ 2.149505] i2c-parport: adapter type unspecified [ 2.157240] i2c-core: driver [ds2782-battery] registered [ 2.159432] i2c-core: driver [max17040] using legacy suspend method [ 2.161918] i2c-core: driver [max17040] using legacy resume method [ 2.164627] i2c-core: driver [max17040] registered [ 2.166879] i2c-core: driver [lp8727] registered [ 2.169078] i2c-core: driver [w83791d] registered [ 2.171231] i2c i2c-0: found normal entry for adapter 0, addr 0x2c [ 2.188093] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 2.204093] i2c i2c-0: found normal entry for adapter 0, addr 0x2e [ 2.220091] i2c i2c-0: found normal entry for adapter 0, addr 0x2f [ 2.236084] i2c-core: driver [adm1026] registered [ 2.238633] i2c i2c-0: found normal entry for adapter 0, addr 0x2c [ 2.264092] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 2.288096] i2c i2c-0: found normal entry for adapter 0, addr 0x2e [ 2.316129] i2c-core: driver [adm9240] registered [ 2.319366] i2c i2c-0: found normal entry for adapter 0, addr 0x2c [ 2.336113] i2c i2c-0: detect fail: address match, 0x2c [ 2.338555] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 2.356094] i2c i2c-0: detect fail: address match, 0x2d [ 2.359614] i2c i2c-0: found normal entry for adapter 0, addr 0x2e [ 2.376097] i2c i2c-0: detect fail: address match, 0x2e [ 2.379623] i2c i2c-0: found normal entry for adapter 0, addr 0x2f [ 2.396100] i2c i2c-0: detect fail: address match, 0x2f [ 2.399670] i2c-core: driver [emc6w201] registered [ 2.402979] i2c i2c-0: found normal entry for adapter 0, addr 0x2c [ 2.420098] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 2.428102] tsc: Refined TSC clocksource calibration: 2999.467 MHz [ 2.436095] i2c i2c-0: found normal entry for adapter 0, addr 0x2e [ 2.456085] i2c-core: driver [f75375] registered [ 2.458264] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 2.500093] i2c i2c-0: found normal entry for adapter 0, addr 0x2e [ 2.522040] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 2.540143] i2c-core: driver [fschmd] registered [ 2.543196] i2c i2c-0: found normal entry for adapter 0, addr 0x73 [ 2.576082] i2c-core: driver [gl520sm] registered [ 2.578295] i2c i2c-0: found normal entry for adapter 0, addr 0x2c [ 2.596096] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 2.616234] i2c-core: driver [lm75] registered [ 2.619353] i2c i2c-0: found normal entry for adapter 0, addr 0x48 [ 2.636108] i2c i2c-0: found normal entry for adapter 0, addr 0x49 [ 2.656099] i2c i2c-0: found normal entry for adapter 0, addr 0x4a [ 2.676095] i2c i2c-0: found normal entry for adapter 0, addr 0x4b [ 2.696096] i2c i2c-0: found normal entry for adapter 0, addr 0x4c [ 2.712085] i2c i2c-0: found normal entry for adapter 0, addr 0x4d [ 2.732068] i2c i2c-0: found normal entry for adapter 0, addr 0x4e [ 2.752065] i2c i2c-0: found normal entry for adapter 0, addr 0x4f [ 2.772074] i2c-core: driver [lm77] registered [ 2.775616] i2c i2c-0: found normal entry for adapter 0, addr 0x48 [ 4.072105] i2c i2c-0: found normal entry for adapter 0, addr 0x49 [ 5.372104] i2c i2c-0: found normal entry for adapter 0, addr 0x4a [ 6.672100] i2c i2c-0: found normal entry for adapter 0, addr 0x4b [ 7.972152] i2c-core: driver [lm78] registered [ 7.975792] i2c i2c-0: found normal entry for adapter 0, addr 0x28 [ 7.992089] i2c i2c-0: found normal entry for adapter 0, addr 0x29 [ 8.012068] i2c i2c-0: found normal entry for adapter 0, addr 0x2a [ 8.032064] i2c i2c-0: found normal entry for adapter 0, addr 0x2b [ 8.052091] i2c i2c-0: found normal entry for adapter 0, addr 0x2c [ 8.072093] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 8.092093] i2c i2c-0: found normal entry for adapter 0, addr 0x2e [ 8.112064] i2c i2c-0: found normal entry for adapter 0, addr 0x2f [ 8.132142] i2c-core: driver [lm80] registered [ 8.145495] i2c i2c-0: found normal entry for adapter 0, addr 0x28 [ 8.164098] i2c i2c-0: found normal entry for adapter 0, addr 0x29 [ 8.184097] i2c i2c-0: found normal entry for adapter 0, addr 0x2a [ 8.200096] i2c i2c-0: found normal entry for adapter 0, addr 0x2b [ 8.220107] i2c i2c-0: found normal entry for adapter 0, addr 0x2c [ 8.240093] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 8.260094] i2c i2c-0: found normal entry for adapter 0, addr 0x2e [ 8.280063] i2c i2c-0: found normal entry for adapter 0, addr 0x2f [ 8.296102] i2c-core: driver [lm85] registered [ 8.298284] i2c i2c-0: found normal entry for adapter 0, addr 0x2c [ 8.324064] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 8.348097] i2c i2c-0: found normal entry for adapter 0, addr 0x2e [ 8.372103] i2c-core: driver [lm87] registered [ 8.374568] i2c i2c-0: found normal entry for adapter 0, addr 0x2c [ 8.392080] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 8.408086] i2c i2c-0: found normal entry for adapter 0, addr 0x2e [ 8.424126] i2c-core: driver [lm90] registered [ 8.426606] i2c i2c-0: found normal entry for adapter 0, addr 0x18 [ 8.468076] i2c i2c-0: found normal entry for adapter 0, addr 0x19 [ 8.508086] i2c i2c-0: found normal entry for adapter 0, addr 0x1a [ 8.548071] i2c i2c-0: found normal entry for adapter 0, addr 0x29 [ 8.588103] i2c i2c-0: found normal entry for adapter 0, addr 0x2a [ 8.632096] i2c i2c-0: found normal entry for adapter 0, addr 0x2b [ 8.676103] i2c i2c-0: found normal entry for adapter 0, addr 0x48 [ 8.720098] i2c i2c-0: found normal entry for adapter 0, addr 0x49 [ 8.764100] i2c i2c-0: found normal entry for adapter 0, addr 0x4a [ 8.808099] i2c i2c-0: found normal entry for adapter 0, addr 0x4b [ 8.852094] i2c i2c-0: found normal entry for adapter 0, addr 0x4c [ 8.896101] i2c i2c-0: found normal entry for adapter 0, addr 0x4d [ 8.940109] i2c i2c-0: found normal entry for adapter 0, addr 0x4e [ 8.984176] i2c i2c-0: found normal entry for adapter 0, addr 0x4f [ 9.028159] i2c-core: driver [lm92] registered [ 9.031520] i2c i2c-0: found normal entry for adapter 0, addr 0x48 [ 9.092111] i2c i2c-0: found normal entry for adapter 0, addr 0x49 [ 9.152114] i2c i2c-0: found normal entry for adapter 0, addr 0x4a [ 9.212114] i2c i2c-0: found normal entry for adapter 0, addr 0x4b [ 9.268199] i2c-core: driver [ltc4151] registered [ 9.271017] i2c-core: driver [max1619] registered [ 9.273647] i2c i2c-0: found normal entry for adapter 0, addr 0x18 [ 9.308122] i2c i2c-0: found normal entry for adapter 0, addr 0x19 [ 9.344067] i2c i2c-0: found normal entry for adapter 0, addr 0x1a [ 9.376064] i2c i2c-0: found normal entry for adapter 0, addr 0x29 [ 9.408072] i2c i2c-0: found normal entry for adapter 0, addr 0x2a [ 9.440064] i2c i2c-0: found normal entry for adapter 0, addr 0x2b [ 9.472063] i2c i2c-0: found normal entry for adapter 0, addr 0x4c [ 9.504062] i2c i2c-0: found normal entry for adapter 0, addr 0x4d [ 9.536063] i2c i2c-0: found normal entry for adapter 0, addr 0x4e [ 9.568173] pc87360: PC8736x not detected, module not inserted [ 9.570978] i2c-core: driver [smsc47m192] registered [ 9.573298] i2c i2c-0: found normal entry for adapter 0, addr 0x2c [ 9.600091] i2c i2c-0: found normal entry for adapter 0, addr 0x2d [ 9.624239] acquirewdt: WDT driver for Acquire single board computer initialising [ 9.628409] acquirewdt: I/O address 0x0043 already in use [ 9.630824] acquirewdt: probe of acquirewdt failed with error -5 [ 9.633376] eurotechwdt: Eurotech WDT driver 0.01 at 3F0 (Interrupt 10) - timeout event: int [ 9.637016] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 9.640726] wafer5823wdt: cannot register miscdev on minor=130 (err=-16) [ 9.643650] sc1200wdt: build 20020303 [ 9.645552] sc1200wdt: io parameter must be specified [ 9.647878] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 9.650268] sbc60xxwdt: cannot register miscdev on minor=130 (err=-16) [ 9.653212] w83627hf_wdt: WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising [ 9.657534] w83627hf_wdt: Watchdog already running. Resetting timeout to 60 sec [ 9.660923] w83627hf_wdt: cannot register miscdev on minor=130 (err=-16) [ 9.663546] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 9.666449] md: linear personality registered for level -1 [ 9.668930] md: multipath personality registered for level -4 [ 9.671818] device-mapper: ioctl: 4.22.1-ioctl (2012-06-01) initialised: dm-devel@redhat.com [ 9.675874] device-mapper: multipath: version 1.4.0 loaded [ 9.678356] device-mapper: multipath round-robin: version 1.0.0 loaded [ 9.681198] device-mapper: multipath queue-length: version 0.1.0 loaded [ 9.684063] device-mapper: multipath service-time: version 0.2.0 loaded [ 9.687379] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/none/none/1.1.2.2 [ 9.690841] Modular ISDN core version 1.1.29 [ 9.692892] NET: Registered protocol family 34 [ 9.694985] mISDN: Layer-1-over-IP driver Rev. 2.00 [ 9.697435] 0 virtual devices registered [ 9.699363] usbcore: registered new interface driver HFC-S_USB [ 9.701964] AVM Fritz PCI driver Rev. 2.3 [ 9.703913] Sedlbauer Speedfax+ Driver Rev. 2.0 [ 9.706128] mISDNipac module version 2.0 [ 9.708067] mISDN: ISAR driver Rev. 2.1 [ 9.709959] isdnloop-ISDN-driver Rev 1.11.6.7 [ 9.712191] isdnloop: (loop0) virtual card added [ 9.714364] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81e5b55b [ 9.714364] [ 9.719546] Pid: 1, comm: swapper Not tainted 3.5.0-rc6+ #16 [ 9.722091] Call Trace: [ 9.723510] [] panic+0xa0/0x19d [ 9.725771] [] ? isdnloop_init+0x9b/0x9d [ 9.728266] [] ? isar_mod_init+0x1d/0x1d [ 9.730771] [] __stack_chk_fail+0x16/0x20 [ 9.733294] [] isdnloop_init+0x9b/0x9d [ 9.735803] [] do_one_initcall+0x78/0x131 [ 9.738336] [] kernel_init+0xf1/0x175 [ 9.740749] [] ? do_early_param+0x8c/0x8c [ 9.743247] [] kernel_thread_helper+0x4/0x10 [ 9.745885] [] ? do_one_initcall+0x131/0x131 [ 9.748499] [] ? gs_change+0x13/0x13 [ 9.750856] Rebooting in 10 seconds..