[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1342009699-7031-1-git-send-email-abbotti@mev.co.uk>
Date: Wed, 11 Jul 2012 13:28:19 +0100
From: Ian Abbott <abbotti@....co.uk>
To: Linux Kernel <linux-kernel@...r.kernel.org>
CC: "devel@...verdev.osuosl.org" <devel@...verdev.osuosl.org>,
Ian Abbott <abbotti@....co.uk>,
H Hartley Sweeten <hsweeten@...ionengravers.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: [PATCH] staging: comedi: rtd520: add a few comments
H Hartley Sweeten's recent series of patches to clean up the rtd520
driver made some of the register accesses harder to understand. Add a
few comments to provide some clues to the reader.
Signed-off-by: Ian Abbott <abbotti@....co.uk>
Cc: H Hartley Sweeten <hsweeten@...ionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
To be applied after Hartley's 83 patches.
---
drivers/staging/comedi/drivers/rtd520.c | 23 ++++++++++++++++++-----
1 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 5a2953e..9998d6b 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -494,6 +494,7 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
writel(0, devpriv->las0 + LAS0_ADC_FIFO_CLEAR);
rtd_load_channelgain_list(dev, 1, &chanspec);
+ /* ADC conversion trigger source: SOFTWARE */
writel(0, devpriv->las0 + LAS0_ADC_CONVERSION);
/* convert samples */
for (i = 0; i < limit; ++i) {
@@ -544,7 +545,7 @@ static int rtd_ai_rinsn(struct comedi_device *dev,
/* write channel to multiplexer and clear channel gain table */
rtd_load_channelgain_list(dev, 1, &insn->chanspec);
- /* set conversion source */
+ /* ADC conversion trigger source: SOFTWARE */
writel(0, devpriv->las0 + LAS0_ADC_CONVERSION);
/* convert n samples */
@@ -908,8 +909,9 @@ abortTransfer:
/* fall into transferDone */
transferDone:
+ /* pacer stop source: SOFTWARE */
writel(0, devpriv->las0 + LAS0_PACER_STOP);
- writel(0, devpriv->las0 + LAS0_PACER);
+ writel(0, devpriv->las0 + LAS0_PACER); /* stop pacer */
writel(0, devpriv->las0 + LAS0_ADC_CONVERSION);
devpriv->intMask = 0;
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
@@ -1180,8 +1182,9 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
int timer;
/* stop anything currently running */
+ /* pacer stop source: SOFTWARE */
writel(0, devpriv->las0 + LAS0_PACER_STOP);
- writel(0, devpriv->las0 + LAS0_PACER);
+ writel(0, devpriv->las0 + LAS0_PACER); /* stop pacer */
writel(0, devpriv->las0 + LAS0_ADC_CONVERSION);
devpriv->intMask = 0;
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
@@ -1215,12 +1218,17 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
/* setup the common case and override if needed */
if (cmd->chanlist_len > 1) {
/*DPRINTK ("rtd520: Multi channel setup\n"); */
+ /* pacer start source: SOFTWARE */
writel(0, devpriv->las0 + LAS0_PACER_START);
+ /* burst trigger source: PACER */
writel(1, devpriv->las0 + LAS0_BURST_START);
+ /* ADC conversion trigger source: BURST */
writel(2, devpriv->las0 + LAS0_ADC_CONVERSION);
} else { /* single channel */
/*DPRINTK ("rtd520: single channel setup\n"); */
+ /* pacer start source: SOFTWARE */
writel(0, devpriv->las0 + LAS0_PACER_START);
+ /* ADC conversion trigger source: PACER */
writel(1, devpriv->las0 + LAS0_ADC_CONVERSION);
}
writel((devpriv->fifoLen / 2 - 1) & 0xffff, devpriv->las0 + LAS0_ACNT);
@@ -1269,7 +1277,9 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->transCount = 0;
devpriv->flags &= ~SEND_EOS;
}
+ /* pacer clock source: INTERNAL 8MHz */
writel(1, devpriv->las0 + LAS0_PACER_SELECT);
+ /* just interrupt, don't stop */
writel(1, devpriv->las0 + LAS0_ACNT_STOP_ENABLE);
/* BUG??? these look like enumerated values, but they are bit fields */
@@ -1305,6 +1315,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
break;
case TRIG_EXT:
+ /* pacer start source: EXTERNAL */
writel(1, devpriv->las0 + LAS0_PACER_START);
break;
@@ -1327,6 +1338,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
break;
case TRIG_EXT: /* external */
+ /* burst trigger source: EXTERNAL */
writel(2, devpriv->las0 + LAS0_BURST_START);
break;
@@ -1378,7 +1390,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
/* BUG: start_src is ASSUMED to be TRIG_NOW */
/* BUG? it seems like things are running before the "start" */
- readl(devpriv->las0 + LAS0_PACER);
+ readl(devpriv->las0 + LAS0_PACER); /* start pacer */
return 0;
}
@@ -1391,8 +1403,9 @@ static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
u32 overrun;
u16 status;
+ /* pacer stop source: SOFTWARE */
writel(0, devpriv->las0 + LAS0_PACER_STOP);
- writel(0, devpriv->las0 + LAS0_PACER);
+ writel(0, devpriv->las0 + LAS0_PACER); /* stop pacer */
writel(0, devpriv->las0 + LAS0_ADC_CONVERSION);
devpriv->intMask = 0;
writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
--
1.7.8.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists