linux-kernel - Re: [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1460334.RCi3doz24X@harkonnen>
Date:	Wed, 11 Jul 2012 15:36:25 +0200
From:	Federico Vaga <federico.vaga@...il.com>
To:	Hans Verkuil <hverkuil@...all.nl>
Cc:	Mauro Carvalho Chehab <mchehab@...radead.org>,
	Giancarlo Asnaghi <giancarlo.asnaghi@...com>,
	linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH RFC] [media] adv7180.c: convert to v4l2 control framework

Hi Hans,

Thank you for your review

> > +static int adv7180_init_controls(struct adv7180_state *state)
> > +{
> > +	v4l2_ctrl_handler_init(&state->ctrl_hdl, 2);
> 
> 2 -> 4, since there are 4 controls. It's a hint only, but it helps
> optimizing the internal hash data structure.

Sure :)

> > 
> > @@ -445,9 +402,9 @@ static const struct v4l2_subdev_video_ops
> > adv7180_video_ops = {> 
> >  static const struct v4l2_subdev_core_ops adv7180_core_ops = {
> >  
> >  	.g_chip_ident = adv7180_g_chip_ident,
> >  	.s_std = adv7180_s_std,
> > 
> > -	.queryctrl = adv7180_queryctrl,
> > -	.g_ctrl = adv7180_g_ctrl,
> > -	.s_ctrl = adv7180_s_ctrl,
> > +	.queryctrl = v4l2_subdev_queryctrl,
> > +	.g_ctrl = v4l2_subdev_g_ctrl,
> > +	.s_ctrl = v4l2_subdev_s_ctrl,
> 
> If adv7180 is currently *only* used by bridge/platform drivers that
> also use the control framework, then you can remove
> queryctrl/g/s_ctrl altogether.

I'm not sure to undestand this point. I "grepped" for the adv7180 and it 
seem that I'm the only user of the adv7180 (sta2x11 VIP driver). In the
VIP driver I don't use the control framework (there aren't controls), so 
I think these lines must be there. Am I wrong?

I think you are thinking at the "Inheriting Controls" section of the 
v4l2-controls.txt document. Right?


> > -	ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG,
> > state->hue); +	ret = i2c_smbus_write_byte_data(client,
> > ADV7180_HUE_REG,
> > +					ADV7180_HUE_DEF);
> 
> It shouldn't be necessary to initialize the controls since
> v4l2_ctrl_handler_setup does that for you already.

Removed

-- 
Federico Vaga
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/