linux-kernel - RE: How to use the generic thermal sysfs.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1342164616.27605.129.camel@tegra-chromium-2>
Date:	Fri, 13 Jul 2012 15:30:16 +0800
From:	Wei Ni <wni@...dia.com>
To:	Zhang Rui <rui.zhang@...el.com>
CC:	"R, Durgadoss" <durgadoss.r@...el.com>,
	"Brown, Len" <len.brown@...el.com>,
	"akpm@...ux-foundation.org" <akpm@...ux-foundation.org>,
	"khali@...ux-fr.org" <khali@...ux-fr.org>,
	"joe@...ches.com" <joe@...ches.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-tegra@....kernel.org" <linux-tegra@....kernel.org>,
	Alex Courbot <acourbot@...dia.com>
Subject: RE: How to use the generic thermal sysfs.

On Fri, 2012-07-13 at 09:51 +0800, Zhang Rui wrote:
> On 四, 2012-07-12 at 04:54 -0600, R, Durgadoss wrote:
> > Hi,
> > 
> > > -----Original Message-----
> > > From: Wei Ni [mailto:wni@...dia.com]
> > > Sent: Thursday, July 12, 2012 3:53 PM
> > > To: Zhang, Rui; Brown, Len; akpm@...ux-foundation.org; khali@...ux-fr.org;
> > > joe@...ches.com; R, Durgadoss
> > > Cc: linux-kernel@...r.kernel.org; linux-tegra@....kernel.org;
> > > acourbot@...dia.com
> > > Subject: How to use the generic thermal sysfs.
> > > 
> > > Hi, all
> > > I'm working on the tegra thermal throttling upstream issue.
> > > The tegra30 board use the nct1008 as the thermal sensor, and the lm90 is
> > > the sensor driver. We want to use the generic thermal sysfs.
> > > 
> > > My question is where should we register the thermal zone device? We may
> > > have two place to do it:
> > > 1. register it in the sensor driver, such as lm90.c
> > > In this way, the sensor driver doesn't need to export any APIs, such as
> > > get_temp.
> > 
> > This approach is preferred.
> > 
> > > 2. register in my tegra thermal framework.
> > > In this way, the sensor driver need to export some APIs, which are used
> > > to register the ops and do any other things.
> > 
> > What do you mean by "my tegra thermal framework" ? Where does the source
> > file for this sit in the mainline kernel ?
> > 
> I have the same question.
> It sounds like that you want to use the tegra thermal framework to do
> thermal management instead of the generic thermal layer, right?
> 
> IMO, the purpose of the generic thermal layer is
> 1) do kernel thermal management
> 2) export unique sysfs I/F to userspace so that users/userspace
> applications can take over the thermal management.
> 
> what is the benefit to have another driver to do thermal management in
> kernel?
> If the current thermal management in the generic thermal layer can not
> work well on your platform, it is a good chance to enhance the kernel
> thermal manager. :)

Our tegra thermal framework also will use the generic thermal layer. It
will register the cooling device, and run the throttling in this generic
framework.
But we have a special mechanism, when the temp is below the trip temp,
we will set different cpu capability for different temp range. For
example, set the low/high temp as 20C/30C to the sensor, and set the cpu
to the max capability, it mean the cpu can run up to the max freq and
voltage in this temp range. if the temp is out that range, the sensor
will have irq/alert to notify the tegra framework, then we will set to
another temperature range and cpu capability.
I think we can try to add this mechanism to the generic framework as a
new policy, right?

> 
> thanks,
> rui
> 
> > > 
> > > How should I do it?
> > > 
> > > And in current codes, there have the event notification, in the form of
> > > a netlink event. But it's difficult to be used in the kernel, it's
> > > normally for the communication with user-space. How about to add a
> > > notify call chain for it? So when the sensor has irq alert, it can send
> > > a notify to my thermal framework in kernel.
> > 
> > We are working on a notification API from any generic sensor driver to
> > the thermal framework.
> > Please have a look at the 'notify_thermal_framework' API in the patch here:
> > http://www.spinics.net/lists/linux-acpi/msg36049.html

It's cool. I will cherry pick them to run it.

> > 
> > Thanks,
> > Durga
> > 
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/