| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 13 Jul 2012 10:58:17 -0600
From: Shuah Khan <shuahkhan@...il.com>
To: "G.Shark Jeong" <gshark.jeong@...il.com>
Cc: shuahkhan@...il.com, Bryan Wu <bryan.wu@...onical.com>,
Richard Purdie <rpurdie@...ys.net>,
Daniel Jeong <daniel.jeong@...com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] leds: Add LED driver for lm3554 chip
On Fri, 2012-07-13 at 18:11 +0900, G.Shark Jeong wrote:
> From: "G.Shark Jeong" <gshark.jeong@...il.com>
>
> LM3554 :
> The LM3554 is a 2 MHz fixed-frequency synchronous boost
> converter with 1.2A dual high side led drivers.
> Datasheet: www.ti.com
>
> Signed-off-by: G.Shark Jeong <gshark.jeong@...il.com>
> ---
> drivers/leds/Kconfig | 8 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-lm3554.c | 324 +++++++++++++++++++++++++++++
> include/linux/platform_data/leds-lm3554.h | 66 ++++++
> 4 files changed, 399 insertions(+), 0 deletions(-)
> create mode 100644 drivers/leds/leds-lm3554.c
> create mode 100644 include/linux/platform_data/leds-lm3554.h
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 12b2b55..ad54bc2 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -415,6 +415,14 @@ config LEDS_MAX8997
> This option enables support for on-chip LED drivers on
> MAXIM MAX8997 PMIC.
>
> +config LEDS_LM3554
> + tristate "LED support for LM3554"
> + depends on LEDS_CLASS && I2C
> + select REGMAP_I2C
> + help
> + This option enables support for LEDs connected to LM3554.
> + LM3554 includes Torch, Flash and Indicator functions.
> +
There are two other leds drivers leds-lm3556.c for Texas Instruments
LM3556, and leds-lm3533.c for LM3533 chip in the leds sub-system. Are
these chip-sets that different that a special driver is needed? Can they
be handled by one driver that can handle chip specific variations? I am
speculating based on the minor number change in the chip-set numbering,
maybe they are not that different to warrant a new driver.
-- Shuah
> config LEDS_OT200
> tristate "LED support for the Bachmann OT200"
> depends on LEDS_CLASS && HAS_IOMEM
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index f8958cd..19903ed 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -47,6 +47,7 @@ obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
> obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
> obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o
> obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
> +obj-$(CONFIG_LEDS_LM3554) += leds-lm3554.o
>
> # LED SPI Drivers
> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
> diff --git a/drivers/leds/leds-lm3554.c b/drivers/leds/leds-lm3554.c
> new file mode 100644
> index 0000000..4f53086
> --- /dev/null
> +++ b/drivers/leds/leds-lm3554.c
> @@ -0,0 +1,324 @@
> +/*
> +* Simple driver for Texas Instruments LM3554 LED Flash driver chip
> +* Copyright (C) 2012 Texas Instruments
> +*
> +* This program is free software; you can redistribute it and/or modify
> +* it under the terms of the GNU General Public License version 2 as
> +* published by the Free Software Foundation.
> +*
> +*/
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/gpio.h>
> +#include <linux/leds.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/fs.h>
> +#include <linux/regmap.h>
> +#include <linux/platform_data/leds-lm3554.h>
> +
> +#define REG_TORCH (0xA0)
> +#define REG_FLASH (0xB0)
> +#define REG_FLASH_TIME (0xC0)
> +#define REG_FLAG (0xD0)
> +#define REG_CONF1 (0xE0)
> +#define REG_CONF2 (0xF0)
> +#define REG_GPIO (0x20)
> +#define REG_VIN_MON (0x80)
> +#define REG_MAX REG_VIN_MON
> +
> +enum lm3554_mode {
> + MODE_SHDN = 0,
> + MODE_INDIC,
> + MODE_TORCH,
> + MODE_FLASH,
> + MODE_VOUT,
> + MODE_VOUT_INDIC,
> + MODE_VOUT_TORCH,
> + MODE_VOUT_FLASH,
> +};
> +
> +struct lm3554_chip_data {
> + struct device *dev;
> +
> + struct led_classdev cdev_flash;
> + struct led_classdev cdev_torch;
> + struct led_classdev cdev_indicator;
> +
> + struct lm3554_platform_data *pdata;
> +
> + struct mutex lock;
> + struct regmap *regmap;
> + unsigned int last_flag;
> +};
> +
> +/* chip initialize */
> +static int __devinit lm3554_chip_init(struct lm3554_chip_data *chip)
> +{
> + int ret;
> + unsigned int reg_val;
> + struct lm3554_platform_data *pdata = chip->pdata;
> +
> + /* input and output pins configuration */
> + reg_val = pdata->pin_strobe | pdata->pin_tx1
> + | pdata->pin_tx2 | pdata->ledi_pin;
> + ret = regmap_update_bits(chip->regmap, REG_CONF1, 0xAC, reg_val);
> + if (ret < 0)
> + goto out;
> +
> + return ret;
> +out:
> + dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
> + return ret;
> +}
> +
> +/* chip control */
> +static void lm3554_control(struct lm3554_chip_data *chip,
> + u8 brightness, enum lm3554_mode opmode)
> +{
> + int ret;
> + unsigned int reg_val;
> + struct lm3554_platform_data *pdata = chip->pdata;
> +
> + ret = regmap_read(chip->regmap, REG_FLAG, &chip->last_flag);
> + if (ret < 0)
> + goto out;
> + if (chip->last_flag)
> + dev_info(chip->dev, "LM3554 Last FLAG is 0x%x\n",
> + chip->last_flag);
> + /* brightness 0 means shutdown */
> + if (!brightness)
> + opmode = MODE_SHDN;
> +
> + switch (opmode) {
> + case MODE_TORCH:
> + if (pdata->pin_tx1 == LM3554_TX1_HW_TORCH) {
> + ret = regmap_update_bits(chip->regmap,
> + REG_CONF1, 0x80, 0x80);
> + if (ret < 0)
> + goto out;
> + opmode = MODE_SHDN;
> + }
> + ret = regmap_update_bits(chip->regmap,
> + REG_TORCH, 0x38,
> + (brightness - 1) << 3);
> + if (ret < 0)
> + goto out;
> + break;
> +
> + case MODE_FLASH:
> + if (pdata->pin_strobe == LM3554_STROBE_EN) {
> + ret = regmap_update_bits(chip->regmap,
> + REG_CONF1, 0x84, 0x04);
> + if (ret < 0)
> + goto out;
> + opmode = MODE_SHDN;
> + }
> + ret = regmap_update_bits(chip->regmap, REG_FLASH, 0x78,
> + (brightness - 1) << 3);
> + if (ret < 0)
> + goto out;
> + break;
> +
> + case MODE_INDIC:
> + if (pdata->ledi_pin == LM3554_LEDI_INDICATOR) {
> + ret = regmap_update_bits(chip->regmap,
> + REG_CONF1, 0x08, 0x08);
> + if (ret < 0)
> + goto out;
> + opmode = MODE_SHDN;
> + }
> + ret = regmap_update_bits(chip->regmap, REG_TORCH, 0x38,
> + (brightness - 1) << 3);
> + if (ret < 0)
> + goto out;
> + break;
> + case MODE_SHDN:
> + break;
> + default:
> + return;
> + }
> +
> + /* set voltage out mode */
> + reg_val = opmode | pdata->vout_mode;
> + ret = regmap_update_bits(chip->regmap, REG_TORCH, 0x07, reg_val);
> + if (ret < 0)
> + goto out;
> + return;
> +out:
> + dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
> + return;
> +}
> +
> +/* torch */
> +static void lm3554_torch_brightness_set(struct led_classdev *cdev,
> + enum led_brightness brightness)
> +{
> + struct lm3554_chip_data *chip =
> + container_of(cdev, struct lm3554_chip_data, cdev_torch);
> +
> + mutex_lock(&chip->lock);
> + lm3554_control(chip, brightness, MODE_TORCH);
> + mutex_unlock(&chip->lock);
> + return;
> +}
> +
> +/* flash */
> +static void lm3554_strobe_brightness_set(struct led_classdev *cdev,
> + enum led_brightness brightness)
> +{
> + struct lm3554_chip_data *chip =
> + container_of(cdev, struct lm3554_chip_data, cdev_flash);
> +
> + mutex_lock(&chip->lock);
> + lm3554_control(chip, brightness, MODE_FLASH);
> + mutex_unlock(&chip->lock);
> + return;
> +}
> +
> +/* indicator */
> +static void lm3554_indicator_brightness_set(struct led_classdev *cdev,
> + enum led_brightness brightness)
> +{
> + struct lm3554_chip_data *chip =
> + container_of(cdev, struct lm3554_chip_data, cdev_indicator);
> +
> + mutex_lock(&chip->lock);
> + lm3554_control(chip, brightness, MODE_INDIC);
> + mutex_unlock(&chip->lock);
> + return;
> +}
> +
> +static const struct regmap_config lm3554_regmap = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = REG_MAX,
> +};
> +
> +/* module initialize */
> +static int __devinit lm3554_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + int ret;
> + struct lm3554_chip_data *chip;
> + struct lm3554_platform_data *pdata = client->dev.platform_data;
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> + dev_err(&client->dev, "i2c functionality check fail.\n");
> + return -EOPNOTSUPP;
> + }
> +
> + if (pdata == NULL) {
> + dev_err(&client->dev, "Needs Platform Data.\n");
> + return -ENODATA;
> + }
> +
> + chip =
> + devm_kzalloc(&client->dev, sizeof(struct lm3554_chip_data),
> + GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + chip->dev = &client->dev;
> + chip->pdata = pdata;
> +
> + chip->regmap = /*devm_ */ regmap_init_i2c(client, &lm3554_regmap);
> + if (IS_ERR(chip->regmap)) {
> + ret = PTR_ERR(chip->regmap);
> + dev_err(&client->dev,
> + "Failed to allocate register map: %d\n", ret);
> + return ret;
> + }
> +
> + mutex_init(&chip->lock);
> + i2c_set_clientdata(client, chip);
> +
> + ret = lm3554_chip_init(chip);
> + if (ret < 0)
> + goto err_chip_init;
> +
> + /* flash */
> + chip->cdev_flash.name = "flash";
> + chip->cdev_flash.max_brightness = 16;
> + chip->cdev_flash.brightness_set = lm3554_strobe_brightness_set;
> + ret = led_classdev_register((struct device *)
> + &client->dev, &chip->cdev_flash);
> + if (ret < 0)
> + goto err_chip_init;
> + /* torch */
> + chip->cdev_torch.name = "torch";
> + chip->cdev_torch.max_brightness = 8;
> + chip->cdev_torch.brightness_set = lm3554_torch_brightness_set;
> + ret = led_classdev_register((struct device *)
> + &client->dev, &chip->cdev_torch);
> + if (ret < 0)
> + goto err_chip_init;
> + /* indicator */
> + chip->cdev_indicator.name = "indicator";
> + chip->cdev_indicator.max_brightness = 4;
> + chip->cdev_indicator.brightness_set = lm3554_indicator_brightness_set;
> + ret = led_classdev_register((struct device *)
> + &client->dev, &chip->cdev_indicator);
> + if (ret < 0)
> + goto err_chip_init;
> +
> + dev_info(chip->dev, "lm3554 initialize OK\n");
> +
> + return 0;
> +
> +err_chip_init:
> + if (&chip->cdev_indicator)
> + led_classdev_unregister(&chip->cdev_indicator);
> + if (&chip->cdev_torch)
> + led_classdev_unregister(&chip->cdev_torch);
> + if (&chip->cdev_flash)
> + led_classdev_unregister(&chip->cdev_flash);
> +
> + dev_err(chip->dev, "lm3554 initialize fail\n");
> + return ret;
> +}
> +
> +static int __devexit lm3554_remove(struct i2c_client *client)
> +{
> + int ret;
> + struct lm3554_chip_data *chip = i2c_get_clientdata(client);
> +
> + if (&chip->cdev_indicator)
> + led_classdev_unregister(&chip->cdev_indicator);
> + if (&chip->cdev_torch)
> + led_classdev_unregister(&chip->cdev_torch);
> + if (&chip->cdev_flash)
> + led_classdev_unregister(&chip->cdev_flash);
> + ret = regmap_write(chip->regmap, REG_TORCH, 0x00);
> + if (ret < 0)
> + dev_err(chip->dev,
> + "%s:i2c access fail to register\n", __func__);
> + dev_info(chip->dev, "lm3554 is removed");
> + return 0;
> +}
> +
> +static const struct i2c_device_id lm3554_id[] = {
> + {LM3554_NAME, 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, lm3554_id);
> +
> +static struct i2c_driver lm3554_i2c_driver = {
> + .driver = {
> + .name = LM3554_NAME,
> + .owner = THIS_MODULE,
> + .pm = NULL,
> + },
> + .probe = lm3554_probe,
> + .remove = __devexit_p(lm3554_remove),
> + .id_table = lm3554_id,
> +};
> +
> +module_i2c_driver(lm3554_i2c_driver);
> +
> +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3554");
> +MODULE_AUTHOR("Daniel Jeong <daniel.jeong@...com>");
> +MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@...il.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/platform_data/leds-lm3554.h b/include/linux/platform_data/leds-lm3554.h
> new file mode 100644
> index 0000000..883cfbd
> --- /dev/null
> +++ b/include/linux/platform_data/leds-lm3554.h
> @@ -0,0 +1,66 @@
> +/*
> + * Copyright (C) 2012 Texas Instruments
> + *
> + * License Terms: GNU General Public License v2
> + *
> + * Simple driver for Texas Instruments LM3554 LED driver chip
> + *
> + * Author: Daniel Jeong <daniel.jeong@...il.com>
> + * G.Shark Jeong <gshark.jeong@...il.com>
> + */
> +
> +#ifndef _LINUX_LED_FLASH_LM3554_H__
> +#define _LINUX_LED_FLASH_LM3554_H__
> +
> +#define LM3554_NAME "leds-lm3554"
> +
> +/* input pin configuration */
> +enum lm3554_strobe {
> + LM3554_STROBE_DISABLE = 0x04,
> + LM3554_STROBE_EN = 0x00,
> +};
> +
> +/* input pin configuration */
> +enum lm3554_tx1 {
> + LM3554_TX1_FL_INT = 0x00,
> + LM3554_TX1_HW_TORCH = 0x80,
> + LM3554_TX1_GPIO = 0x10,
> +};
> +
> +/* input pin configuration */
> +enum lm3554_tx2 {
> + LM3554_TX2_EMVM = 0x00,
> + LM3554_TX2_PAM_SYNC = 0x20,
> + LM3554_TX2_GPIO = 0x10,
> +};
> +
> +/* output pin configuration */
> +enum lm3554_ledi {
> + LM3554_LEDI_INDICATOR = 0x00,
> + LM3554_LEDI_THERMAL_COMP = 0x08,
> +};
> +
> +enum lm3554_vout {
> + LM3554_VOUTMODE_DISABLE = 0x00,
> + LM3554_VOUTMODE_ENABLE = 0x04,
> +};
> +
> +/**
> + * struct lm3554_platform_data
> + * @strobe : strobe input enable
> + * @pin_tx1 : input pin tx1/torch/gpio1
> + * @pin_tx2 : input pin envm/tx2/gpio2
> + * @ledi_pin : output pin ledi/ntc
> + * @vout_mode : voltage out mode
> + */
> +struct lm3554_platform_data {
> + enum lm3554_strobe pin_strobe;
> +
> + enum lm3554_tx1 pin_tx1;
> + enum lm3554_tx2 pin_tx2;
> +
> + enum lm3554_ledi ledi_pin;
> + enum lm3554_vout vout_mode;
> +};
> +
> +#endif /* _LINUX_LED_FLASH_LM3554_H__ */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists