lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1343092165-9470-24-git-send-email-cyril@ti.com>
Date:	Mon, 23 Jul 2012 21:09:25 -0400
From:	Cyril Chemparathy <cyril@...com>
To:	<linux-arm-kernel@...ts.infradead.org>
CC:	<linux-kernel@...r.kernel.org>, <nico@...aro.org>,
	<will.deacon@....com>, <catalin.marinas@....com>,
	Cyril Chemparathy <cyril@...com>,
	Vitaly Andrianov <vitalya@...com>
Subject: [RFC 23/23] ARM: keystone: add switch over to high physical address range

Keystone platforms have their physical memory mapped at an address outside the
32-bit physical range.  A Keystone machine with 16G of RAM would find its
memory at 0x0800000000 - 0x0bffffffff.

For boot purposes, the interconnect supports a limited alias of some of this
memory within the 32-bit addressable space (0x80000000 - 0xffffffff).  This
aliasing is implemented in hardware, and is not intended to be used much
beyond boot.  For instance, DMA coherence does not work when running out of
this aliased address space.

Therefore, we've taken the approach of booting out of the low physical address
range, and subsequently we switch over to the high range once we're safely
inside machine specific territory.  This patch implements this switch over
mechanism, which involves rewiring the TTBRs and page tables to point to the
new physical address space.

Signed-off-by: Vitaly Andrianov <vitalya@...com>
Signed-off-by: Cyril Chemparathy <cyril@...com>
---
 arch/arm/Kconfig                             |    1 +
 arch/arm/boot/dts/keystone-sim.dts           |    6 +-
 arch/arm/configs/keystone_defconfig          |    1 +
 arch/arm/mach-keystone/include/mach/memory.h |   29 ++++++++
 arch/arm/mach-keystone/keystone.c            |   92 ++++++++++++++++++++++++++
 arch/arm/mach-keystone/platsmp.c             |   21 ++++++
 6 files changed, 147 insertions(+), 3 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5b82879..f970ee1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -373,6 +373,7 @@ config ARCH_KEYSTONE
 	select NEED_MACH_MEMORY_H
 	select HAVE_SCHED_CLOCK
 	select HAVE_SMP
+	select ZONE_DMA if ARM_LPAE
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
 	  SoCs.
diff --git a/arch/arm/boot/dts/keystone-sim.dts b/arch/arm/boot/dts/keystone-sim.dts
index 118d631..afdef89 100644
--- a/arch/arm/boot/dts/keystone-sim.dts
+++ b/arch/arm/boot/dts/keystone-sim.dts
@@ -4,7 +4,7 @@
 / {
 	model = "Texas Instruments Keystone 2 SoC";
 	compatible = "ti,keystone-evm";
-	#address-cells = <1>;
+	#address-cells = <2>;
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
@@ -13,11 +13,11 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8 debug earlyprintk lpj=50000 rdinit=/bin/ash rw root=/dev/ram0 initrd=0x85000000,9M";
+		bootargs = "console=ttyS0,115200n8 debug earlyprintk lpj=50000 rdinit=/bin/ash rw root=/dev/ram0 initrd=0x805000000,9M";
 	};
 
 	memory {
-		reg = <0x80000000 0x8000000>;
+		reg = <0x00000008 0x00000000 0x8000000>;
 	};
 
 	cpus {
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 5f71e66..8ea3b96 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -1,6 +1,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_KEYSTONE=y
+CONFIG_ARM_LPAE=y
 CONFIG_SMP=y
 CONFIG_ARM_ARCH_TIMER=y
 CONFIG_NR_CPUS=4
diff --git a/arch/arm/mach-keystone/include/mach/memory.h b/arch/arm/mach-keystone/include/mach/memory.h
index 7c78b1e..6404633 100644
--- a/arch/arm/mach-keystone/include/mach/memory.h
+++ b/arch/arm/mach-keystone/include/mach/memory.h
@@ -19,4 +19,33 @@
 #define MAX_PHYSMEM_BITS	36
 #define SECTION_SIZE_BITS	34
 
+#define KEYSTONE_LOW_PHYS_START		0x80000000ULL
+#define KEYSTONE_LOW_PHYS_SIZE		0x80000000ULL /* 2G */
+#define KEYSTONE_LOW_PHYS_END		(KEYSTONE_LOW_PHYS_START + \
+					 KEYSTONE_LOW_PHYS_SIZE - 1)
+
+#define KEYSTONE_HIGH_PHYS_START	0x800000000ULL
+#define KEYSTONE_HIGH_PHYS_SIZE		0x400000000ULL	/* 16G */
+#define KEYSTONE_HIGH_PHYS_END		(KEYSTONE_HIGH_PHYS_START + \
+					 KEYSTONE_HIGH_PHYS_SIZE - 1)
+#ifdef CONFIG_ARM_LPAE
+
+#ifndef __ASSEMBLY__
+
+extern phys_addr_t  keystone_phys_offset;
+
+#define PLAT_PHYS_OFFSET keystone_phys_offset
+
+static inline phys_addr_t __virt_to_idmap(unsigned long x)
+{
+	return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET +
+		KEYSTONE_LOW_PHYS_START;
+}
+
+#define virt_to_idmap(x)	__virt_to_idmap((unsigned long)(x))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_ARM_LPAE */
+
 #endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index 650e202..f0f4a08 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -19,12 +19,20 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
+#include <linux/sched.h>
 
 #include <asm/arch_timer.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
+#include <asm/setup.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/cputype.h>
+#include <asm/procinfo.h>
 
 extern struct smp_ops keystone_smp_ops;
 
@@ -74,6 +82,86 @@ static const char *keystone_match[] __initconst = {
 	NULL,
 };
 
+#ifdef CONFIG_ARM_LPAE
+
+phys_addr_t keystone_phys_offset  = KEYSTONE_LOW_PHYS_START;
+
+extern struct proc_info_list *lookup_processor_type(unsigned int);
+
+static void __init keystone_init_meminfo(void)
+{
+	unsigned long map_start, map_end;
+	struct proc_info_list *procinfo;
+	phys_addr_t mem_start, mem_end;
+	pgd_t *pgd0, *pgdk;
+	pud_t *pud0, *pudk;
+	pmd_t *pmd0, *pmdk;
+	phys_addr_t phys;
+	pmdval_t pmdprot;
+	int i;
+
+	BUG_ON(meminfo.nr_banks < 1);
+
+	mem_start = meminfo.bank[0].start;
+	mem_end   = mem_start + meminfo.bank[0].size - 1;
+
+	/* nothing to do if we are running out of the <32-bit space */
+	if (mem_start >= KEYSTONE_LOW_PHYS_START &&
+	    mem_end   <= KEYSTONE_LOW_PHYS_END)
+		return;
+
+	BUG_ON(mem_start < KEYSTONE_HIGH_PHYS_START ||
+	       mem_end   > KEYSTONE_HIGH_PHYS_END);
+
+	/* remap kernel code and data */
+	map_start = init_mm.start_code;
+	map_end   = init_mm.brk;
+
+	/* get a handle on things -  */
+	pgd0 = pgd_offset_k(0);
+	pud0 = pud_offset(pgd0, 0);
+	pmd0 = pmd_offset(pud0, 0);
+
+	pgdk = pgd_offset_k(map_start);
+	pudk = pud_offset(pgdk, map_start);
+	pmdk = pmd_offset(pudk, map_start);
+
+	procinfo = lookup_processor_type(read_cpuid_id());
+	pmdprot  = procinfo->__cpu_mm_mmu_flags;
+
+	/* set the phys offset, all pa/va operations now use this */
+	keystone_phys_offset = KEYSTONE_HIGH_PHYS_START;
+
+	/* remap level 1 table */
+	for (i = 0; i < PTRS_PER_PGD; i++) {
+		*pud0++ = __pud(__pa(pmd0) | PMD_TYPE_TABLE | L_PGD_SWAPPER);
+		pmd0 += PTRS_PER_PMD;
+	}
+
+	/* remap pmds for kernel mapping */
+	phys = __pa(map_start) & PMD_MASK;
+	do {
+		*pmdk++ = __pmd(phys | pmdprot);
+		phys += PMD_SIZE;
+	} while (phys < map_end);
+
+	flush_cache_all();
+	cpu_set_ttbr(0, __pa(pgd0));
+	cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET);
+	local_flush_tlb_all();
+
+	pr_err("relocated to high address space\n");
+}
+
+#else
+
+static void __init keystone_init_meminfo(void)
+{
+	/* nothing to do here */
+}
+
+#endif
+
 DT_MACHINE_START(KEYSTONE, "Keystone")
 	smp_ops(keystone_smp_ops)
 	.map_io		= keystone_map_io,
@@ -82,5 +170,9 @@ DT_MACHINE_START(KEYSTONE, "Keystone")
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= keystone_init,
 	.dt_compat	= keystone_match,
+	.init_meminfo	= keystone_init_meminfo,
+#ifdef CONFIG_ZONE_DMA
+	.dma_zone_size	= SZ_2G,
+#endif
 	.nr_irqs	= 480,
 MACHINE_END
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
index 437659a..074fccb 100644
--- a/arch/arm/mach-keystone/platsmp.c
+++ b/arch/arm/mach-keystone/platsmp.c
@@ -24,6 +24,7 @@
 #include <asm/smp_ops.h>
 #include <asm/hardware/gic.h>
 #include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
 #include <asm/memory.h>
 
 extern void secondary_startup(void);
@@ -51,15 +52,35 @@ static void __init keystone_smp_prepare_cpus(unsigned int max_cpus)
 	/* nothing for now */
 }
 
+#ifdef CONFIG_ARM_LPAE
+static void __cpuinit keystone_secondary_initmem(void)
+{
+	pgd_t *pgd0;
+
+	pgd0 = pgd_offset_k(0);
+	cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET);
+	local_flush_tlb_all();
+}
+#else
+static void __cpuinit keystone_secondary_initmem(void)
+{
+}
+#endif
+
 static void __cpuinit keystone_secondary_init(unsigned int cpu)
 {
 	gic_secondary_init(0);
+	keystone_secondary_initmem();
 }
 
 static int __cpuinit
 keystone_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
+#ifdef CONFIG_ARM_LPAE
+	unsigned long *jump_ptr = phys_to_virt(0x8000001f0);
+#else
 	unsigned long *jump_ptr = phys_to_virt(0x800001f0);
+#endif
 
 	jump_ptr[cpu] = virt_to_idmap(&secondary_startup);
 	__cpuc_flush_dcache_area(jump_ptr, sizeof(jump_ptr) * 4);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ