| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1343390750-3642-3-git-send-email-acourbot@nvidia.com>
Date: Fri, 27 Jul 2012 21:05:49 +0900
From: Alexandre Courbot <acourbot@...dia.com>
To: Stephen Warren <swarren@...dia.com>,
Thierry Reding <thierry.reding@...onic-design.de>,
Simon Glass <sjg@...omium.org>,
Grant Likely <grant.likely@...retlab.ca>,
Rob Herring <rob.herring@...xeda.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Arnd Bergmann <arnd@...db.de>
CC: <linux-tegra@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-fbdev@...r.kernel.org>,
<devicetree-discuss@...ts.ozlabs.org>,
Alexandre Courbot <acourbot@...dia.com>
Subject: [RFC][PATCH v3 2/3] pwm_backlight: use power sequences
Make use of the power sequences specified in the device tree or platform
data, if any.
Signed-off-by: Alexandre Courbot <acourbot@...dia.com>
---
.../bindings/video/backlight/pwm-backlight.txt | 55 +++++-
drivers/video/backlight/Kconfig | 1 +
drivers/video/backlight/pwm_bl.c | 213 +++++++++++++++------
include/linux/pwm_backlight.h | 18 +-
4 files changed, 225 insertions(+), 62 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
index 1e4fc72..59abeba 100644
--- a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
+++ b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
@@ -2,7 +2,6 @@ pwm-backlight bindings
Required properties:
- compatible: "pwm-backlight"
- - pwms: OF device-tree PWM specification (see PWM binding[0])
- brightness-levels: Array of distinct brightness levels. Typically these
are in the range from 0 to 255, but any range starting at 0 will do.
The actual brightness level (PWM duty cycle) will be interpolated
@@ -10,10 +9,22 @@ Required properties:
last value in the array represents a 100% duty cycle (brightest).
- default-brightness-level: the default brightness level (index into the
array defined by the "brightness-levels" property)
+ - pwms: OF device-tree PWM specification (see PWM binding[0]). Exactly one PWM
+ must be specified
+ - pwm-names: a list of names for the PWM devices specified in the
+ "pwms" property (see PWM binding[0])
+ - power-on-sequence: Power sequence that will bring the backlight on. This
+ sequence must reference the PWM specified in the pwms property by its
+ name. It can also reference extra GPIOs or regulators, and introduce
+ delays between sequence steps
+ - power-off-sequence: Power sequence that will bring the backlight off. This
+ sequence must reference the PWM specified in the pwms property by its
+ name. It can also reference extra GPIOs or regulators, and introduce
+ delays between sequence steps
Optional properties:
- - pwm-names: a list of names for the PWM devices specified in the
- "pwms" property (see PWM binding[0])
+ - *-supply: regulators used within a power sequence
+ - *-gpio: GPIOs used within a power sequence
[0]: Documentation/devicetree/bindings/pwm/pwm.txt
@@ -21,8 +32,42 @@ Example:
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 5000000>;
-
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
+
+ pwms = <&pwm 0 5000000>;
+ pwm-names = "backlight";
+ power-supply = <&backlight_reg>;
+ enable-gpio = <&gpio 6 0>;
+
+ power-on-sequence {
+ regulator@0 {
+ id = "power";
+ enable;
+ post-delay = <10>;
+ };
+ pwm@1 {
+ id = "backlight";
+ enable;
+ };
+ gpio@2 {
+ id = "enable-gpio";
+ enable;
+ };
+ };
+ power-off-sequence {
+ gpio@0 {
+ id = "enable-gpio";
+ disable;
+ };
+ pwm@1 {
+ id = "backlight";
+ disable;
+ };
+ regulator@2 {
+ id = "power";
+ disable;
+ pre-delay = <10>;
+ };
+ };
};
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index cf28276..6fb8aa3 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -246,6 +246,7 @@ config BACKLIGHT_CARILLO_RANCH
config BACKLIGHT_PWM
tristate "Generic PWM based Backlight Driver"
depends on PWM
+ select POWER_SEQ
help
If you have a LCD backlight adjustable by PWM, say Y to enable
this driver.
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 995f016..6e3a49e 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -27,6 +27,12 @@ struct pwm_bl_data {
unsigned int period;
unsigned int lth_brightness;
unsigned int *levels;
+ bool enabled;
+ power_seq_resources resources;
+ power_seq *power_on_seq;
+ power_seq *power_off_seq;
+
+ /* Legacy callbacks */
int (*notify)(struct device *,
int brightness);
void (*notify_after)(struct device *,
@@ -35,6 +41,34 @@ struct pwm_bl_data {
void (*exit)(struct device *);
};
+static void pwm_backlight_on(struct backlight_device *bl)
+{
+ struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+ int ret;
+
+ if (pb->enabled)
+ return;
+
+ if ((ret = power_seq_run(pb->dev, pb->power_on_seq)) < 0)
+ dev_err(&bl->dev, "cannot run power on sequence\n");
+
+ pb->enabled = true;
+}
+
+static void pwm_backlight_off(struct backlight_device *bl)
+{
+ struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+ int ret;
+
+ if (!pb->enabled)
+ return;
+
+ if ((ret = power_seq_run(pb->dev, pb->power_off_seq)) < 0)
+ dev_err(&bl->dev, "cannot run power off sequence\n");
+
+ pb->enabled = false;
+}
+
static int pwm_backlight_update_status(struct backlight_device *bl)
{
struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
@@ -51,8 +85,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
brightness = pb->notify(pb->dev, brightness);
if (brightness == 0) {
- pwm_config(pb->pwm, 0, pb->period);
- pwm_disable(pb->pwm);
+ pwm_backlight_off(bl);
} else {
int duty_cycle;
@@ -66,7 +99,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
duty_cycle = pb->lth_brightness +
(duty_cycle * (pb->period - pb->lth_brightness) / max);
pwm_config(pb->pwm, duty_cycle, pb->period);
- pwm_enable(pb->pwm);
+ pwm_backlight_on(bl);
}
if (pb->notify_after)
@@ -145,12 +178,16 @@ static int pwm_backlight_parse_dt(struct device *dev,
data->max_brightness--;
}
- /*
- * TODO: Most users of this driver use a number of GPIOs to control
- * backlight power. Support for specifying these needs to be
- * added.
- */
+ data->power_on_seq = of_parse_power_seq(dev, of_find_node_by_name(node,
+ "power-on-sequence"));
+ if (IS_ERR(data->power_on_seq))
+ return PTR_ERR(data->power_on_seq);
+ data->power_off_seq = of_parse_power_seq(dev, of_find_node_by_name(node,
+ "power-off-sequence"));
+ if (IS_ERR(data->power_off_seq))
+ return PTR_ERR(data->power_off_seq);
+ data->use_power_sequences = true;
return 0;
}
@@ -168,73 +205,141 @@ static int pwm_backlight_parse_dt(struct device *dev,
}
#endif
+/**
+ * Construct the power sequences corresponding to the legacy platform data.
+ */
+static int pwm_backlight_legacy_probe(struct platform_device *pdev,
+ struct pwm_bl_data *pb)
+{
+ struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct power_seq_resource *res;
+ struct power_seq_step *step;
+
+ pb->pwm = pwm_get(dev, NULL);
+ if (IS_ERR(pb->pwm)) {
+ dev_warn(dev, "unable to request PWM, trying legacy API\n");
+
+ pb->pwm = pwm_request(data->pwm_id, "pwm-backlight");
+ if (IS_ERR(pb->pwm)) {
+ dev_err(dev, "unable to request legacy PWM\n");
+ return PTR_ERR(pb->pwm);
+ }
+ pwm_set_period(pb->pwm, data->pwm_period_ns);
+ }
+
+ pb->notify = data->notify;
+ pb->notify_after = data->notify_after;
+ pb->check_fb = data->check_fb;
+ pb->exit = data->exit;
+ pb->dev = dev;
+
+ /* Now build the resources and sequences corresponding to this PWM */
+ res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+ if (!res) return -ENOMEM;
+ res->type = POWER_SEQ_PWM;
+ res->id = "pwm-backlight";
+ res->pwm = pb->pwm;
+ list_add(&res->list, &pb->resources);
+
+ /* allocate both power on and off sequences at the same time */
+ step = devm_kzalloc(dev, sizeof(*step) * 4, GFP_KERNEL);
+ if (!step) return -ENOMEM;
+ step->resource = res;
+ memcpy(&step[2], &step[0], sizeof(*step));
+ step[0].params.enable = 1;
+ pb->power_on_seq = &step[0];
+ pb->power_off_seq = &step[2];
+
+ return 0;
+}
+
static int pwm_backlight_probe(struct platform_device *pdev)
{
struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
struct platform_pwm_backlight_data defdata;
+ struct power_seq_resource *res;
struct backlight_properties props;
struct backlight_device *bl;
struct pwm_bl_data *pb;
unsigned int max;
int ret;
+ pb = devm_kzalloc(&pdev->dev, sizeof(*pb), GFP_KERNEL);
+ if (!pb) {
+ dev_err(&pdev->dev, "no memory for state\n");
+ return -ENOMEM;
+ }
+
+ INIT_LIST_HEAD(&pb->resources);
+
+ /* using new interface or device tree */
if (!data) {
+ /* build platform data from device tree */
ret = pwm_backlight_parse_dt(&pdev->dev, &defdata);
- if (ret < 0) {
+ if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else if (ret < 0) {
dev_err(&pdev->dev, "failed to find platform data\n");
return ret;
}
-
data = &defdata;
}
- if (data->init) {
- ret = data->init(&pdev->dev);
+ if (!data->use_power_sequences) {
+ /* using legacy interface */
+ ret = pwm_backlight_legacy_probe(pdev, pb);
if (ret < 0)
return ret;
+ } else {
+ /* build sequences and allocate resources from platform data */
+ if (data->power_on_seq) {
+ pb->power_on_seq = power_seq_build(&pdev->dev,
+ &pb->resources,
+ data->power_on_seq);
+ if (IS_ERR(pb->power_on_seq))
+ return PTR_ERR(pb->power_on_seq);
+ }
+ if (data->power_off_seq) {
+ pb->power_off_seq = power_seq_build(&pdev->dev,
+ &pb->resources,
+ data->power_off_seq);
+ if (IS_ERR(pb->power_off_seq))
+ return PTR_ERR(pb->power_off_seq);
+ }
+
+ /* we must have exactly one PWM for this driver */
+ list_for_each_entry(res, &pb->resources, list) {
+ if (res->type != POWER_SEQ_PWM)
+ continue;
+ if (pb->pwm) {
+ dev_err(&pdev->dev, "more than one PWM used\n");
+ return -EINVAL;
+ }
+ /* keep the pwm at hand */
+ pb->pwm = res->pwm;
+ }
}
- pb = devm_kzalloc(&pdev->dev, sizeof(*pb), GFP_KERNEL);
- if (!pb) {
- dev_err(&pdev->dev, "no memory for state\n");
- ret = -ENOMEM;
- goto err_alloc;
+ /* from here we should have a PWM */
+ if (!pb->pwm) {
+ dev_err(&pdev->dev, "no PWM defined!\n");
+ return -EINVAL;
+ }
+
+ if (data->init) {
+ ret = data->init(&pdev->dev);
+ if (ret < 0)
+ goto err;
}
if (data->levels) {
max = data->levels[data->max_brightness];
pb->levels = data->levels;
- } else
+ } else {
max = data->max_brightness;
-
- pb->notify = data->notify;
- pb->notify_after = data->notify_after;
- pb->check_fb = data->check_fb;
- pb->exit = data->exit;
- pb->dev = &pdev->dev;
-
- pb->pwm = pwm_get(&pdev->dev, NULL);
- if (IS_ERR(pb->pwm)) {
- dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
-
- pb->pwm = pwm_request(data->pwm_id, "pwm-backlight");
- if (IS_ERR(pb->pwm)) {
- dev_err(&pdev->dev, "unable to request legacy PWM\n");
- ret = PTR_ERR(pb->pwm);
- goto err_alloc;
- }
}
- dev_dbg(&pdev->dev, "got pwm for backlight\n");
-
- /*
- * The DT case will set the pwm_period_ns field to 0 and store the
- * period, parsed from the DT, in the PWM device. For the non-DT case,
- * set the period from platform data.
- */
- if (data->pwm_period_ns > 0)
- pwm_set_period(pb->pwm, data->pwm_period_ns);
-
pb->period = pwm_get_period(pb->pwm);
pb->lth_brightness = data->lth_brightness * (pb->period / max);
@@ -246,20 +351,20 @@ static int pwm_backlight_probe(struct platform_device *pdev)
if (IS_ERR(bl)) {
dev_err(&pdev->dev, "failed to register backlight\n");
ret = PTR_ERR(bl);
- goto err_bl;
+ goto err;
}
bl->props.brightness = data->dft_brightness;
backlight_update_status(bl);
platform_set_drvdata(pdev, bl);
+
return 0;
-err_bl:
- pwm_put(pb->pwm);
-err_alloc:
+err:
if (data->exit)
data->exit(&pdev->dev);
+ power_seq_free_resources(&pb->resources);
return ret;
}
@@ -269,9 +374,9 @@ static int pwm_backlight_remove(struct platform_device *pdev)
struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
backlight_device_unregister(bl);
- pwm_config(pb->pwm, 0, pb->period);
- pwm_disable(pb->pwm);
- pwm_put(pb->pwm);
+ pwm_backlight_off(bl);
+ power_seq_free_resources(&pb->resources);
+
if (pb->exit)
pb->exit(&pdev->dev);
return 0;
@@ -285,8 +390,7 @@ static int pwm_backlight_suspend(struct device *dev)
if (pb->notify)
pb->notify(pb->dev, 0);
- pwm_config(pb->pwm, 0, pb->period);
- pwm_disable(pb->pwm);
+ pwm_backlight_off(bl);
if (pb->notify_after)
pb->notify_after(pb->dev, 0);
return 0;
@@ -323,4 +427,3 @@ module_platform_driver(pwm_backlight_driver);
MODULE_DESCRIPTION("PWM based Backlight Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pwm-backlight");
-
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
index 56f4a86..3e8bd2c 100644
--- a/include/linux/pwm_backlight.h
+++ b/include/linux/pwm_backlight.h
@@ -5,14 +5,28 @@
#define __LINUX_PWM_BACKLIGHT_H
#include <linux/backlight.h>
+#include <linux/power_seq.h>
struct platform_pwm_backlight_data {
- int pwm_id;
unsigned int max_brightness;
unsigned int dft_brightness;
unsigned int lth_brightness;
- unsigned int pwm_period_ns;
unsigned int *levels;
+ /* Set this to true otherwise the legacy interface will be used */
+ bool use_power_sequences;
+ /*
+ * New interface - arrays of steps terminated by a STOP instance, or
+ * NULL if unused.
+ */
+ struct platform_power_seq_step *power_on_seq;
+ struct platform_power_seq_step *power_off_seq;
+ /*
+ * Legacy interface - single PWM and callback methods to control
+ * the power sequence. pwm_id and pwm_period_ns need only be specified
+ * if get_pwm(dev, NULL) will return NULL.
+ */
+ int pwm_id;
+ unsigned int pwm_period_ns;
int (*init)(struct device *dev);
int (*notify)(struct device *dev, int brightness);
void (*notify_after)(struct device *dev, int brightness);
--
1.7.11.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists