| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120728103739.5aae9bac@mat-laptop>
Date: Sat, 28 Jul 2012 10:37:39 +0200
From: matthieu castet <castet.matthieu@...e.fr>
To: Tim Gardner <tim.gardner@...onical.com>
Cc: linux-kernel@...r.kernel.org, Stanislaw Gruszka <stf_xl@...pl>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-usb@...r.kernel.org
Subject: Re: [PATCH] ueagle-atm: Declare MODULE_FIRMWARE usage
Ack-by: matthieu castet <castet.matthieu@...e.fr>
Le Wed, 25 Jul 2012 14:32:50 -0600,
Tim Gardner <tim.gardner@...onical.com> a écrit :
> Cc: Matthieu CASTET <castet.matthieu@...e.fr>
> Cc: Stanislaw Gruszka <stf_xl@...pl>
> Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
> Cc: linux-usb@...r.kernel.org
> Signed-off-by: Tim Gardner <tim.gardner@...onical.com>
> ---
> drivers/usb/atm/ueagle-atm.c | 79
> +++++++++++++++++++++++++++++++++++------- 1 file changed, 66
> insertions(+), 13 deletions(-)
>
> diff --git a/drivers/usb/atm/ueagle-atm.c
> b/drivers/usb/atm/ueagle-atm.c index d7e422d..e1f8b2c 100644
> --- a/drivers/usb/atm/ueagle-atm.c
> +++ b/drivers/usb/atm/ueagle-atm.c
> @@ -307,6 +307,34 @@ enum {
> #define FW_GET_BYTE(p) (*((__u8 *) (p)))
>
> #define FW_DIR "ueagle-atm/"
> +#define EAGLE_FIRMWARE FW_DIR "eagle.fw"
> +#define ADI930_FIRMWARE FW_DIR "adi930.fw"
> +#define EAGLE_I_FIRMWARE FW_DIR "eagleI.fw"
> +#define EAGLE_II_FIRMWARE FW_DIR "eagleII.fw"
> +#define EAGLE_III_FIRMWARE FW_DIR "eagleIII.fw"
> +#define EAGLE_IV_FIRMWARE FW_DIR "eagleIV.fw"
> +
> +#define DSP4I_FIRMWARE FW_DIR "DSP4i.bin"
> +#define DSP4P_FIRMWARE FW_DIR "DSP4p.bin"
> +#define DSP9I_FIRMWARE FW_DIR "DSP9i.bin"
> +#define DSP9P_FIRMWARE FW_DIR "DSP9p.bin"
> +#define DSPEI_FIRMWARE FW_DIR "DSPei.bin"
> +#define DSPEP_FIRMWARE FW_DIR "DSPep.bin"
> +#define FPGA930_FIRMWARE FW_DIR "930-fpga.bin"
> +
> +#define CMV4P_FIRMWARE FW_DIR "CMV4p.bin"
> +#define CMV4PV2_FIRMWARE FW_DIR "CMV4p.bin.v2"
> +#define CMV4I_FIRMWARE FW_DIR "CMV4i.bin"
> +#define CMV4IV2_FIRMWARE FW_DIR "CMV4i.bin.v2"
> +#define CMV9P_FIRMWARE FW_DIR "CMV9p.bin"
> +#define CMV9PV2_FIRMWARE FW_DIR "CMV9p.bin.v2"
> +#define CMV9I_FIRMWARE FW_DIR "CMV9i.bin"
> +#define CMV9IV2_FIRMWARE FW_DIR "CMV9i.bin.v2"
> +#define CMVEP_FIRMWARE FW_DIR "CMVep.bin"
> +#define CMVEPV2_FIRMWARE FW_DIR "CMVep.bin.v2"
> +#define CMVEI_FIRMWARE FW_DIR "CMVei.bin"
> +#define CMVEIV2_FIRMWARE FW_DIR "CMVei.bin.v2"
> +
> #define UEA_FW_NAME_MAX 30
> #define NB_MODEM 4
>
> @@ -694,26 +722,26 @@ err:
> static int uea_load_firmware(struct usb_device *usb, unsigned int
> ver) {
> int ret;
> - char *fw_name = FW_DIR "eagle.fw";
> + char *fw_name = EAGLE_FIRMWARE;
>
> uea_enters(usb);
> uea_info(usb, "pre-firmware device, uploading firmware\n");
>
> switch (ver) {
> case ADI930:
> - fw_name = FW_DIR "adi930.fw";
> + fw_name = ADI930_FIRMWARE;
> break;
> case EAGLE_I:
> - fw_name = FW_DIR "eagleI.fw";
> + fw_name = EAGLE_I_FIRMWARE;
> break;
> case EAGLE_II:
> - fw_name = FW_DIR "eagleII.fw";
> + fw_name = EAGLE_II_FIRMWARE;
> break;
> case EAGLE_III:
> - fw_name = FW_DIR "eagleIII.fw";
> + fw_name = EAGLE_III_FIRMWARE;
> break;
> case EAGLE_IV:
> - fw_name = FW_DIR "eagleIV.fw";
> + fw_name = EAGLE_IV_FIRMWARE;
> break;
> }
>
> @@ -869,19 +897,19 @@ static int request_dsp(struct uea_softc *sc)
>
> if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
> if (IS_ISDN(sc))
> - dsp_name = FW_DIR "DSP4i.bin";
> + dsp_name = DSP4I_FIRMWARE;
> else
> - dsp_name = FW_DIR "DSP4p.bin";
> + dsp_name = DSP4P_FIRMWARE;
> } else if (UEA_CHIP_VERSION(sc) == ADI930) {
> if (IS_ISDN(sc))
> - dsp_name = FW_DIR "DSP9i.bin";
> + dsp_name = DSP9I_FIRMWARE;
> else
> - dsp_name = FW_DIR "DSP9p.bin";
> + dsp_name = DSP9P_FIRMWARE;
> } else {
> if (IS_ISDN(sc))
> - dsp_name = FW_DIR "DSPei.bin";
> + dsp_name = DSPEI_FIRMWARE;
> else
> - dsp_name = FW_DIR "DSPep.bin";
> + dsp_name = DSPEP_FIRMWARE;
> }
>
> ret = request_firmware(&sc->dsp_firm, dsp_name,
> &sc->usb_dev->dev); @@ -1925,7 +1953,7 @@ static int
> load_XILINX_firmware(struct uea_softc *sc) int ret, size, u, ln;
> const u8 *pfw;
> u8 value;
> - char *fw_name = FW_DIR "930-fpga.bin";
> + char *fw_name = FPGA930_FIRMWARE;
>
> uea_enters(INS_TO_USBDEV(sc));
>
> @@ -2753,3 +2781,28 @@ module_usb_driver(uea_driver);
> MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W.
> Gruszka"); MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver");
> MODULE_LICENSE("Dual BSD/GPL");
> +MODULE_FIRMWARE(EAGLE_FIRMWARE);
> +MODULE_FIRMWARE(ADI930_FIRMWARE);
> +MODULE_FIRMWARE(EAGLE_I_FIRMWARE);
> +MODULE_FIRMWARE(EAGLE_II_FIRMWARE);
> +MODULE_FIRMWARE(EAGLE_III_FIRMWARE);
> +MODULE_FIRMWARE(EAGLE_IV_FIRMWARE);
> +MODULE_FIRMWARE(DSP4I_FIRMWARE);
> +MODULE_FIRMWARE(DSP4P_FIRMWARE);
> +MODULE_FIRMWARE(DSP9I_FIRMWARE);
> +MODULE_FIRMWARE(DSP9P_FIRMWARE);
> +MODULE_FIRMWARE(DSPEI_FIRMWARE);
> +MODULE_FIRMWARE(DSPEP_FIRMWARE);
> +MODULE_FIRMWARE(FPGA930_FIRMWARE);
> +MODULE_FIRMWARE(CMV4P_FIRMWARE);
> +MODULE_FIRMWARE(CMV4PV2_FIRMWARE);
> +MODULE_FIRMWARE(CMV4I_FIRMWARE);
> +MODULE_FIRMWARE(CMV4IV2_FIRMWARE);
> +MODULE_FIRMWARE(CMV9P_FIRMWARE);
> +MODULE_FIRMWARE(CMV9PV2_FIRMWARE);
> +MODULE_FIRMWARE(CMV9I_FIRMWARE);
> +MODULE_FIRMWARE(CMV9IV2_FIRMWARE);
> +MODULE_FIRMWARE(CMVEP_FIRMWARE);
> +MODULE_FIRMWARE(CMVEPV2_FIRMWARE);
> +MODULE_FIRMWARE(CMVEI_FIRMWARE);
> +MODULE_FIRMWARE(CMVEIV2_FIRMWARE);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists