lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <201208012304.46593.linux@rainbow-software.org>
Date:	Wed, 1 Aug 2012 23:04:46 +0200
From:	Ondrej Zary <linux@...nbow-software.org>
To:	Márton Németh <nm127@...email.hu>
Cc:	Bryan Wu <bryan.wu@...onical.com>,
	Richard Purdie <rpurdie@...ys.net>, linux-leds@...r.kernel.org,
	Kernel development list <linux-kernel@...r.kernel.org>
Subject: [PATCH 1/2] leds-clevo-mail: add MODULE_DEVICE_TABLE

Enable autoloading of leds-clevo-mail by using MODULE_DEVICE_TABLE.

Signed-off-by: Ondrej Zary <linux@...nbow-software.org>

--- a/drivers/leds/leds-clevo-mail.c
+++ b/drivers/leds/leds-clevo-mail.c
@@ -31,7 +31,7 @@ static int __init clevo_mail_led_dmi_callback(const struct dmi_system_id *id)
 }
 
 /*
- * struct mail_led_whitelist - List of known good models
+ * struct clevo_mail_led_dmi_table - List of known good models
  *
  * Contains the known good models this driver is compatible with.
  * When adding a new model try to be as strict as possible. This
@@ -39,7 +39,7 @@ static int __init clevo_mail_led_dmi_callback(const struct dmi_system_id *id)
  * detected as working, but in reality it is not) as low as
  * possible.
  */
-static struct dmi_system_id __initdata mail_led_whitelist[] = {
+static struct dmi_system_id __initdata clevo_mail_led_dmi_table[] = {
 	{
 		.callback = clevo_mail_led_dmi_callback,
 		.ident = "Clevo D410J",
@@ -89,6 +89,7 @@ static struct dmi_system_id __initdata mail_led_whitelist[] = {
 	},
 	{ }
 };
+MODULE_DEVICE_TABLE(dmi, clevo_mail_led_dmi_table);
 
 static void clevo_mail_led_set(struct led_classdev *led_cdev,
 				enum led_brightness value)
@@ -180,7 +181,7 @@ static int __init clevo_mail_led_init(void)
 
 	/* Check with the help of DMI if we are running on supported hardware */
 	if (!nodetect) {
-		count = dmi_check_system(mail_led_whitelist);
+		count = dmi_check_system(clevo_mail_led_dmi_table);
 	} else {
 		count = 1;
 		printk(KERN_ERR KBUILD_MODNAME ": Skipping DMI detection. "




-- 
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ