<5>Linux version 3.5.0-mini (root@solidstate) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #12 Fri Aug 3 21:28:08 UTC 2012 <6>e820: BIOS-provided physical RAM map: <6>BIOS-88: [mem 0x0000000000000000-0x000000000009efff] usable <6>BIOS-88: [mem 0x0000000000100000-0x000000000102ffff] usable <5>Notice: NX (Execute Disable) protection missing in CPU! <7>e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved <7>e820: remove [mem 0x000a0000-0x000fffff] usable <6>e820: last_pfn = 0x1030 max_arch_pfn = 0x100000 <7>initial memory mapped: [mem 0x00000000-0x007fffff] <7>Base memory trampoline at [c009b000] 9b000 size 16384 <6>init_memory_mapping: [mem 0x00000000-0x0102ffff] <7> [mem 0x00000000-0x003fffff] page 4k <7> [mem 0x00400000-0x00ffffff] page 2M <7> [mem 0x01000000-0x0102ffff] page 4k <7>kernel direct mapping tables up to 0x102ffff @ [mem 0x007fa000-0x007fffff] <4>ACPI Error: A valid RSDP was not found (20120320/tbxfroot-219) <5>16MB LOWMEM available. <6> mapped low ram: 0 - 01030000 <6> low ram: 0 - 01030000 <4>Zone ranges: <4> DMA [mem 0x00010000-0x00ffffff] <4> Normal [mem 0x01000000-0x0102ffff] <4>Movable zone start for each node <4>Early memory node ranges <4> node 0: [mem 0x00010000-0x0009efff] <4> node 0: [mem 0x00100000-0x0102ffff] <7>On node 0 totalpages: 4031 <7> DMA zone: 32 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 3951 pages, LIFO batch:0 <7> Normal zone: 1 pages used for memmap <7> Normal zone: 47 pages, LIFO batch:0 <6>PM: Registered nosave memory: 000000000009f000 - 0000000000100000 <6>e820: [mem 0x01030000-0xffffffff] available for PCI devices <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 <7>pcpu-alloc: [0] 0 <4>Built 1 zonelists in Zone order, mobility grouping off. Total pages: 3998 <5>Kernel command line: vga=06 rw resume=/dev/sda1 root=/dev/sda2 rw panic=40 <6>PID hash table entries: 64 (order: -4, 256 bytes) <6>Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) <6>Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) <5>__ex_table already sorted, skipping sort <6>Initializing CPU#0 <6>Memory: 12172k/16576k available (2370k kernel code, 3952k reserved, 551k data, 220k init, 0k highmem) <6>virtual kernel memory layout: <6> fixmap : 0xfffe3000 - 0xfffff000 ( 112 kB) <6> vmalloc : 0xc1830000 - 0xfffe1000 ( 999 MB) <6> lowmem : 0xc0000000 - 0xc1030000 ( 16 MB) <6> .init : 0xc03db000 - 0xc0412000 ( 220 kB) <6> .data : 0xc03508c2 - 0xc03da7c0 ( 551 kB) <6> .text : 0xc0100000 - 0xc03508c2 (2370 kB) <6>Checking if this processor honours the WP bit even in supervisor mode...Ok. <6>NR_IRQS:16 nr_irqs:16 16 <7>CPU 0 irqstacks, hard=c0090000 soft=c0092000 <6>Console: colour VGA+ 80x60 <6>console [tty0] enabled <4>Fast TSC calibration using PIT <4>Detected 99.950 MHz processor. <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 199.90 BogoMIPS (lpj=999500) <6>pid_max: default: 4096 minimum: 301 <6>Mount-cache hash table entries: 512 <5>Intel Pentium with F0 0F bug - workaround enabled. <6>CPU: Intel Pentium 75 - 200 stepping 0c <6>Performance Events: no PMU driver, software events only. <6>devtmpfs: initialized <6>NET: Registered protocol family 16 <3>PCI: Fatal: No config space access function found <6>bio: create slab at 0 <6>ACPI: Interpreter disabled. <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <4>PCI: System does not support PCI <4>PCI: System does not support PCI <6>Switching to clocksource pit <6>pnp: PnP ACPI: disabled <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes) <6>TCP established hash table entries: 512 (order: 0, 4096 bytes) <6>TCP bind hash table entries: 512 (order: -1, 2048 bytes) <6>TCP: Hash tables configured (established 512 bind 512) <6>TCP: reno registered <6>UDP hash table entries: 256 (order: 0, 4096 bytes) <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) <6>NET: Registered protocol family 1 <7>PCI: CLS 0 bytes, default 32 <6>platform rtc_cmos: registered platform RTC device (no PNP device found) <6>apm: BIOS version 1.1 Flags 0x02 (Driver version 1.16ac) <6>squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>Btrfs loaded <6>io scheduler noop registered (default) <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] <6>parport0: irq 7 detected <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is an 8272A <6>brd: module loaded <6>loop: module loaded <6>scsi0 : pata_legacy <6>ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 <6>ata1.00: ATA-0: TOSHIBA MK1724FCV, R0.15 L, max PIO2 <6>ata1.00: 511936 sectors, multi 0, CHS 842/16/38 <6>ata1.00: configured for PIO <5>scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1724FC R0.1 PQ: 0 ANSI: 5 <5>sd 0:0:0:0: [sda] 511936 512-byte logical blocks: (262 MB/249 MiB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <6>scsi1 : pata_legacy <6>ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 <5>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 <5>sd 0:0:0:0: [sda] Attached SCSI disk <6>scsi2 : pata_legacy <6>ata3: PATA max PIO4 cmd 0x1e8 ctl 0x3ee irq 11 <6>Switching to clocksource tsc <6>scsi3 : pata_legacy <6>ata4: PATA max PIO4 cmd 0x168 ctl 0x36e irq 10 <6>scsi4 : pata_legacy <6>ata5: PATA max PIO4 cmd 0x1e0 ctl 0x3e6 irq 8 <6>scsi5 : pata_legacy <6>ata6: PATA max PIO4 cmd 0x160 ctl 0x366 irq 12 <6>plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient! <6>NET3 PLIP version 2.4-parport gniibe@mri.co.jp <6>plip0: Parallel port at 0x378, not using IRQ. <6>PPP generic driver version 2.4.2 <6>PPP BSD Compression module registered <6>PPP Deflate Compression module registered <6>Intel ISA PCIC probe: <6> Intel i82365sl B step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets <6> host opts [0]: none <6> host opts [1]: none <6> ISA irqs (scanned) = 3,4,5,7,9,10,11,12,15 status change on irq 15 <6>i8042: PNP: No PS/2 controller found. Probing ports directly. <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mousedev: PS/2 mouse device common for all mice <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <6>zram: num_devices not specified. Using default: 1 <6>zram: Creating 1 devices ... <6>TCP: cubic registered <6>NET: Registered protocol family 17 <6>lib80211: common routines for IEEE802.11 drivers <7>lib80211_crypt: registered algorithm 'NULL' <7>lib80211_crypt: registered algorithm 'WEP' <7>lib80211_crypt: registered algorithm 'CCMP' <7>lib80211_crypt: registered algorithm 'TKIP' <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <6>input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1 <4>EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended <6>VFS: Mounted root (ext2 filesystem) on device 8:2. <6>devtmpfs: mounted <6>Freeing unused kernel memory: 220k freed <6>Write protecting the kernel text: 2372k <6>Write protecting the kernel read-only data: 388k <5>pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 <6>warning: `init' uses 32-bit capabilities (legacy support in use) <4>EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended <4>EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended <6>Adding 31592k swap on /dev/sda1. Priority:-1 extents:1 across:31592k <2>EXT2-fs (sda2): error: ext2_lookup: deleted inode referenced: 46240 <2>EXT2-fs (sda2): error: ext2_lookup: deleted inode referenced: 46240 <6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: <4> excluding 0x1f0-0x1ff 0x378-0x37f <6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: <4> excluding 0x3e0-0x407 0x410-0x417 0x420-0x47f 0x4a0-0x4cf 0x4e0-0x4ff <6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: <4> excluding 0x820-0x87f 0x8a0-0x8c7 0x8d0-0x8ef <6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: <4> excluding 0xc00-0xc6f 0xca0-0xcc7 0xcd0-0xcef <6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d2000-0x0dffff: <4> clean. <6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff: <4> clean. <6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff: <4> clean. <6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c8000-0x0cffff: <4> clean. <6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dffff: <4> clean. <6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c2000-0x0cffff: <4> clean. <6>pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: <4> clean. <6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: <4> clean. <6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: <4> excluding 0x1f0-0x1ff 0x378-0x37f <6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: <4> excluding 0x3e0-0x407 0x410-0x417 0x420-0x47f 0x4a0-0x4cf 0x4e0-0x4ff <6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: <4> excluding 0x820-0x87f 0x8a0-0x8c7 0x8d0-0x8ef <6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: <4> excluding 0xc00-0xc7f 0xca0-0xcc7 0xcd0-0xcef <6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d2000-0x0dffff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c8000-0x0cffff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d8000-0x0dffff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c2000-0x0cffff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff: <4> clean. <6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0de000-0x0dffff: <4> clean. <5>pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 3) <6>pcnet_cs 1.0: eth0: NE2000 Compatible: <4>io 0x300, irq 3, hw_addr 00:80:c8:81:32:c4 <6>Adding 10236k swap on /dev/zram0. Priority:16385 extents:1 across:10236k SS <6>dmesg[1735]: segfault at 807abd0 ip 0806551f sp bfb7b154 error 6