lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1343975435-25469-4-git-send-email-ying.huang@intel.com>
Date:	Fri,  3 Aug 2012 14:30:34 +0800
From:	Huang Ying <ying.huang@...el.com>
To:	Bjorn Helgaas <bhelgaas@...gle.com>
Cc:	linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
	linux-pm@...r.kernel.org, "Rafael J. Wysocki" <rjw@...k.pl>,
	Huang Ying <ying.huang@...el.com>
Subject: [BUGFIX 3/4] PCI/PM: Fix config reg access for D3cold and bridge suspending

This patch fixes the following bug:

http://marc.info/?l=linux-pci&m=134338059022620&w=2

Where lspci does not work properly if a device and the corresponding
parent bridge (such as PCIe port) is suspended.  This is because the
device configuration space registers will be not accessible if the
corresponding parent bridge is suspended or the device is put into
D3cold state.

To solve the issue, the bridge/PCIe port connected to the device is
put into active state before read/write configuration space registers.
If the device is in D3cold state, it will be put into active state
too.

To avoid resume/suspend PCIe port for each configuration register
read/write, a small delay is added before the PCIe port to go
suspended.

Reported-by: Bjorn Mork <bjorn@...k.no>
Signed-off-by: Huang Ying <ying.huang@...el.com>
---
 drivers/pci/pci-sysfs.c        |   37 +++++++++++++++++++++++++++++++++++++
 drivers/pci/pcie/portdrv_pci.c |    9 +++++++++
 2 files changed, 46 insertions(+)

--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -458,6 +458,35 @@ boot_vga_show(struct device *dev, struct
 }
 struct device_attribute vga_attr = __ATTR_RO(boot_vga);
 
+static void
+pci_config_pm_runtime_get(struct pci_dev *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *parent = dev->parent;
+
+	if (parent)
+		pm_runtime_get_sync(parent);
+	pm_runtime_get_noresume(dev);
+	/*
+	 * pdev->current_state is set to PCI_D3cold during suspending,
+	 * so wait until suspending completes
+	 */
+	pm_runtime_barrier(dev);
+	if (pdev->current_state == PCI_D3cold)
+		pm_runtime_resume(dev);
+}
+
+static void
+pci_config_pm_runtime_put(struct pci_dev *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *parent = dev->parent;
+
+	pm_runtime_put(dev);
+	if (parent)
+		pm_runtime_put(parent);
+}
+
 static ssize_t
 pci_read_config(struct file *filp, struct kobject *kobj,
 		struct bin_attribute *bin_attr,
@@ -484,6 +513,8 @@ pci_read_config(struct file *filp, struc
 		size = count;
 	}
 
+	pci_config_pm_runtime_get(dev);
+
 	if ((off & 1) && size) {
 		u8 val;
 		pci_user_read_config_byte(dev, off, &val);
@@ -529,6 +560,8 @@ pci_read_config(struct file *filp, struc
 		--size;
 	}
 
+	pci_config_pm_runtime_put(dev);
+
 	return count;
 }
 
@@ -549,6 +582,8 @@ pci_write_config(struct file* filp, stru
 		count = size;
 	}
 	
+	pci_config_pm_runtime_get(dev);
+
 	if ((off & 1) && size) {
 		pci_user_write_config_byte(dev, off, data[off - init_off]);
 		off++;
@@ -587,6 +622,8 @@ pci_write_config(struct file* filp, stru
 		--size;
 	}
 
+	pci_config_pm_runtime_put(dev);
+
 	return count;
 }
 
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -140,9 +140,17 @@ static int pcie_port_runtime_resume(stru
 {
 	return 0;
 }
+
+static int pcie_port_runtime_idle(struct device *dev)
+{
+	/* Delay for a short while to prevent too frequent suspend/resume */
+	pm_schedule_suspend(dev, 10);
+	return -EBUSY;
+}
 #else
 #define pcie_port_runtime_suspend	NULL
 #define pcie_port_runtime_resume	NULL
+#define pcie_port_runtime_idle		NULL
 #endif
 
 static const struct dev_pm_ops pcie_portdrv_pm_ops = {
@@ -155,6 +163,7 @@ static const struct dev_pm_ops pcie_port
 	.resume_noirq	= pcie_port_resume_noirq,
 	.runtime_suspend = pcie_port_runtime_suspend,
 	.runtime_resume = pcie_port_runtime_resume,
+	.runtime_idle	= pcie_port_runtime_idle,
 };
 
 #define PCIE_PORTDRV_PM_OPS	(&pcie_portdrv_pm_ops)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ