| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1344330980-9064-1-git-send-email-virupax.sadashivpetimath@stericsson.com>
Date: Tue, 7 Aug 2012 14:46:20 +0530
From: Virupax Sadashivpetimath <virupax.sadashivpetimath@...ricsson.com>
To: <balbi@...com>, <gregkh@...uxfoundation.org>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<stern@...land.harvard.edu>, <linus.walleij@...aro.org>,
<praveen.nadahally@...ricsson.com>,
<ragupathy.rajaram@...ricsson.com>, <vikrant.bapat@...ricsson.com>
Subject: [PATCH v2] usb:musb:musb_host: Handle highmem in PIO mode
In case of USB bulk transfer, when himem page
is received, the usb_sg_init function sets the
urb transfer buffer to NULL. When such URB
transfer is handled, kernel crashes in PIO mode.
Handle this by mapping the highmem buffer in PIO mode.
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@...ricsson.com>
Signed-off-by: Praveena NADAHALLY <praveen.nadahally@...ricsson.com>
Acked-by: Linus Walleij <linus.walleij@...aro.org>
---
drivers/usb/musb/musb_host.c | 98 +++++++++++++++++++++++++++++++++++++++--
drivers/usb/musb/musb_host.h | 3 +
2 files changed, 96 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 4bb717d..199bf1a 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -813,9 +813,28 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
if (load_count) {
/* PIO to load FIFO */
qh->segsize = load_count;
- musb_write_fifo(hw_ep, load_count, buf);
+ if (!buf) {
+ sg_miter_start(&qh->sg_miter, urb->sg, 1,
+ SG_MITER_ATOMIC
+ | SG_MITER_FROM_SG);
+ if (!sg_miter_next(&qh->sg_miter)) {
+ dev_err(musb->controller,
+ "error: sg"
+ "list empty\n");
+ sg_miter_stop(&qh->sg_miter);
+ goto finish;
+ }
+ buf = qh->sg_miter.addr + urb->sg->offset +
+ urb->actual_length;
+ load_count = min_t(u32, load_count,
+ qh->sg_miter.length);
+ musb_write_fifo(hw_ep, load_count, buf);
+ qh->sg_miter.consumed = load_count;
+ sg_miter_stop(&qh->sg_miter);
+ } else
+ musb_write_fifo(hw_ep, load_count, buf);
}
-
+finish:
/* re-enable interrupt */
musb_writew(mbase, MUSB_INTRTXE, int_txe);
@@ -1116,6 +1135,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
bool transfer_pending = false;
+ static bool use_sg;
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1163,6 +1183,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
return;
}
+done:
if (status) {
if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
dma->status = MUSB_DMA_STATUS_CORE_ABORT;
@@ -1332,9 +1353,38 @@ void musb_host_tx(struct musb *musb, u8 epnum)
length = qh->maxpacket;
/* Unmap the buffer so that CPU can use it */
usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
- musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+
+ /*
+ * We need to map sg if the transfer_buffer is
+ * NULL.
+ */
+ if (!urb->transfer_buffer)
+ use_sg = true;
+
+ if (use_sg) {
+ /* sg_miter_start is already done in musb_ep_program */
+ if (!sg_miter_next(&qh->sg_miter)) {
+ dev_err(musb->controller, "error: sg list empty\n");
+ sg_miter_stop(&qh->sg_miter);
+ status = -EINVAL;
+ goto done;
+ }
+ urb->transfer_buffer = qh->sg_miter.addr;
+ length = min_t(u32, length, qh->sg_miter.length);
+ musb_write_fifo(hw_ep, length, urb->transfer_buffer);
+ qh->sg_miter.consumed = length;
+ sg_miter_stop(&qh->sg_miter);
+ } else {
+ musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+ }
+
qh->segsize = length;
+ if (use_sg) {
+ if (offset + length >= urb->transfer_buffer_length)
+ use_sg = false;
+ }
+
musb_ep_select(mbase, epnum);
musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
@@ -1442,6 +1492,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
bool done = false;
u32 status;
struct dma_channel *dma;
+ static bool use_sg;
+ unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG;
musb_ep_select(mbase, epnum);
@@ -1756,10 +1808,43 @@ void musb_host_rx(struct musb *musb, u8 epnum)
#endif /* Mentor DMA */
if (!dma) {
+ unsigned int received_len;
+
/* Unmap the buffer so that CPU can use it */
usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
- done = musb_host_packet_rx(musb, urb,
- epnum, iso_err);
+
+ /*
+ * We need to map sg if the transfer_buffer is
+ * NULL.
+ */
+ if (!urb->transfer_buffer) {
+ use_sg = true;
+ sg_miter_start(&qh->sg_miter, urb->sg, 1,
+ sg_flags);
+ }
+
+ if (use_sg) {
+ if (!sg_miter_next(&qh->sg_miter)) {
+ dev_err(musb->controller, "error: sg list empty\n");
+ sg_miter_stop(&qh->sg_miter);
+ status = -EINVAL;
+ done = true;
+ goto finish;
+ }
+ urb->transfer_buffer = qh->sg_miter.addr;
+ received_len = urb->actual_length;
+ qh->offset = 0x0;
+ done = musb_host_packet_rx(musb, urb, epnum,
+ iso_err);
+ /* Calculate the number of bytes received */
+ received_len = urb->actual_length -
+ received_len;
+ qh->sg_miter.consumed = received_len;
+ sg_miter_stop(&qh->sg_miter);
+ } else {
+ done = musb_host_packet_rx(musb, urb,
+ epnum, iso_err);
+ }
dev_dbg(musb->controller, "read %spacket\n", done ? "last " : "");
}
}
@@ -1768,6 +1853,9 @@ finish:
urb->actual_length += xfer_len;
qh->offset += xfer_len;
if (done) {
+ if (use_sg)
+ use_sg = false;
+
if (urb->status == -EINPROGRESS)
urb->status = status;
musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 622d09f..5a9c8fe 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -35,6 +35,8 @@
#ifndef _MUSB_HOST_H
#define _MUSB_HOST_H
+#include <linux/scatterlist.h>
+
static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
{
return container_of((void *) musb, struct usb_hcd, hcd_priv);
@@ -71,6 +73,7 @@ struct musb_qh {
u16 maxpacket;
u16 frame; /* for periodic schedule */
unsigned iso_idx; /* in urb->iso_frame_desc[] */
+ struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */
};
/* map from control or bulk queue head to the first qh on that ring */
--
1.7.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists