| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1344354229-8526-4-git-send-email-joerg.roedel@amd.com>
Date: Tue, 7 Aug 2012 17:43:33 +0200
From: Joerg Roedel <joerg.roedel@....com>
To: <x86@...nel.org>
CC: Suresh Siddha <suresh.b.siddha@...el.com>,
Yinghai Lu <yinghai@...nel.org>,
<linux-kernel@...r.kernel.org>, Joerg Roedel <joerg.roedel@....com>
Subject: [PATCH 03/19] x86, io_apic: Introduce x86_io_apic_ops.disable()
This function pointer is used to call a system-specific
function for disabling the IO-APIC. Currently this is used
for IRQ remapping which has its own disable routine.
Signed-off-by: Joerg Roedel <joerg.roedel@....com>
---
arch/x86/include/asm/io_apic.h | 1 +
arch/x86/include/asm/x86_init.h | 9 +++++----
arch/x86/kernel/apic/io_apic.c | 41 ++++++++++++++++++---------------------
arch/x86/kernel/x86_init.c | 9 +++++----
drivers/iommu/irq_remapping.c | 31 ++++++++++++++++++++++++++++-
5 files changed, 60 insertions(+), 31 deletions(-)
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 73d8c53..57e5917 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -179,6 +179,7 @@ extern void __init native_io_apic_init_mappings(void);
extern unsigned int native_io_apic_read(unsigned int apic, unsigned int reg);
extern void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int val);
extern void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int val);
+extern void native_disable_io_apic(void);
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
{
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 38155f6..8e1b44c 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -189,10 +189,11 @@ struct x86_msi_ops {
};
struct x86_io_apic_ops {
- void (*init) (void);
- unsigned int (*read) (unsigned int apic, unsigned int reg);
- void (*write) (unsigned int apic, unsigned int reg, unsigned int value);
- void (*modify)(unsigned int apic, unsigned int reg, unsigned int value);
+ void (*init) (void);
+ unsigned int (*read) (unsigned int apic, unsigned int reg);
+ void (*write) (unsigned int apic, unsigned int reg, unsigned int value);
+ void (*modify) (unsigned int apic, unsigned int reg, unsigned int value);
+ void (*disable)(void);
};
extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 406eee7..3b77b60 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1925,30 +1925,14 @@ void __init enable_IO_APIC(void)
clear_IO_APIC();
}
-/*
- * Not an __init, needed by the reboot code
- */
-void disable_IO_APIC(void)
+void native_disable_io_apic(void)
{
/*
- * Clear the IO-APIC before rebooting:
- */
- clear_IO_APIC();
-
- if (!legacy_pic->nr_legacy_irqs)
- return;
-
- /*
* If the i8259 is routed through an IOAPIC
* Put that IOAPIC in virtual wire mode
* so legacy interrupts can be delivered.
- *
- * With interrupt-remapping, for now we will use virtual wire A mode,
- * as virtual wire B is little complex (need to configure both
- * IOAPIC RTE as well as interrupt-remapping table entry).
- * As this gets called during crash dump, keep this simple for now.
*/
- if (ioapic_i8259.pin != -1 && !irq_remapping_enabled) {
+ if (ioapic_i8259.pin != -1) {
struct IO_APIC_route_entry entry;
memset(&entry, 0, sizeof(entry));
@@ -1968,12 +1952,25 @@ void disable_IO_APIC(void)
ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
}
+ if (cpu_has_apic || apic_from_smp_config())
+ disconnect_bsp_APIC(ioapic_i8259.pin != -1);
+
+}
+
+/*
+ * Not an __init, needed by the reboot code
+ */
+void disable_IO_APIC(void)
+{
/*
- * Use virtual wire A mode when interrupt remapping is enabled.
+ * Clear the IO-APIC before rebooting:
*/
- if (cpu_has_apic || apic_from_smp_config())
- disconnect_bsp_APIC(!irq_remapping_enabled &&
- ioapic_i8259.pin != -1);
+ clear_IO_APIC();
+
+ if (!legacy_pic->nr_legacy_irqs)
+ return;
+
+ x86_io_apic_ops.disable();
}
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 9f3167e..3ea56c2 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -120,8 +120,9 @@ struct x86_msi_ops x86_msi = {
};
struct x86_io_apic_ops x86_io_apic_ops = {
- .init = native_io_apic_init_mappings,
- .read = native_io_apic_read,
- .write = native_io_apic_write,
- .modify = native_io_apic_modify,
+ .init = native_io_apic_init_mappings,
+ .read = native_io_apic_read,
+ .write = native_io_apic_write,
+ .modify = native_io_apic_modify,
+ .disable = native_disable_io_apic,
};
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 283a43f..f72a5e8 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -1,3 +1,4 @@
+#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/cpumask.h>
@@ -6,6 +7,9 @@
#include <asm/hw_irq.h>
#include <asm/irq_remapping.h>
+#include <asm/processor.h>
+#include <asm/x86_init.h>
+#include <asm/apic.h>
#include "irq_remapping.h"
@@ -17,6 +21,24 @@ int no_x2apic_optout;
static struct irq_remap_ops *remap_ops;
+static void irq_remapping_disable_io_apic(void)
+{
+ /*
+ * With interrupt-remapping, for now we will use virtual wire A
+ * mode, as virtual wire B is little complex (need to configure
+ * both IOAPIC RTE as well as interrupt-remapping table entry).
+ * As this gets called during crash dump, keep this simple for
+ * now.
+ */
+ if (cpu_has_apic || apic_from_smp_config())
+ disconnect_bsp_APIC(0);
+}
+
+static void __init irq_remapping_modify_x86_ops(void)
+{
+ x86_io_apic_ops.disable = irq_remapping_disable_io_apic;
+}
+
static __init int setup_nointremap(char *str)
{
disable_irq_remap = 1;
@@ -74,10 +96,17 @@ int __init irq_remapping_prepare(void)
int __init irq_remapping_enable(void)
{
+ int ret;
+
if (!remap_ops || !remap_ops->enable)
return -ENODEV;
- return remap_ops->enable();
+ ret = remap_ops->enable();
+
+ if (irq_remapping_enabled)
+ irq_remapping_modify_x86_ops();
+
+ return ret;
}
void irq_remapping_disable(void)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists