linux-kernel - Re: [RFT] xhci: Switch PPT ports to EHCI on shutdown.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5023C9D3.8030605@compulab.co.il>
Date:	Thu, 09 Aug 2012 17:31:47 +0300
From:	Denis Turischev <denis@...pulab.co.il>
To:	Sarah Sharp <sarah.a.sharp@...ux.intel.com>
CC:	linux-usb@...r.kernel.org, Greg KH <gregkh@...uxfoundation.org>,
	linux-kernel@...r.kernel.org
Subject: Re: [RFT] xhci: Switch PPT ports to EHCI on shutdown.

Hi Sarah,

Yes, it fixes unexpected wake-up on Intense-PC.
Thanks!

Denis.

On 08/07/2012 08:39 PM, Sarah Sharp wrote:
> The Intel desktop boards DH77EB and DH77DF have a hardware issue that
> can be worked around by BIOS.  If the USB ports are switched to xHCI on
> shutdown, the xHCI host will send a spurious interrupt, which will wake
> the system.  Some BIOS will work around this, but not all.
> 
> The bug can be avoided if the USB ports are switched back to EHCI on
> shutdown.  The Intel Windows driver switches the ports back to EHCI, so
> change the Linux xHCI driver to do the same.
> 
> Unfortunately, we can't tell the two effected boards apart from other
> working motherboards, because the vendors will change the DMI strings
> for the DH77EB and DH77DF boards to their own custom names.  One example
> is Compulab's mini-desktop, the Intense-PC.  Instead, key off the
> Panther Point xHCI host PCI vendor and device ID, and switch the ports
> over for all PPT xHCI hosts.
> 
> The only impact this will have on non-effected boards is to add a couple
> hundred milliseconds delay on boot when the BIOS has to switch the ports
> over from EHCI to xHCI.
> 
> This patch should be backported to kernels as old as 3.0, that contain
> the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
> EHCI/xHCI port switching."
> 
> Signed-off-by: Sarah Sharp <sarah.a.sharp@...ux.intel.com>
> Reported-by: Denis Turischev <denis@...pulab.co.il>
> Cc: stable@...r.kernel.org
> ---
>  drivers/usb/host/pci-quirks.c |    7 +++++++
>  drivers/usb/host/pci-quirks.h |    1 +
>  drivers/usb/host/xhci-pci.c   |    9 +++++++++
>  drivers/usb/host/xhci.c       |    3 +++
>  drivers/usb/host/xhci.h       |    1 +
>  5 files changed, 21 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
> index df0828c..c5e9e4a 100644
> --- a/drivers/usb/host/pci-quirks.c
> +++ b/drivers/usb/host/pci-quirks.c
> @@ -800,6 +800,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
>  }
>  EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
>  
> +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
> +{
> +	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
> +	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
> +}
> +EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
> +
>  /**
>   * PCI Quirks for xHCI.
>   *
> diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
> index b1002a8..ef004a5 100644
> --- a/drivers/usb/host/pci-quirks.h
> +++ b/drivers/usb/host/pci-quirks.h
> @@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void);
>  void usb_amd_quirk_pll_enable(void);
>  bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
>  void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
> +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
>  #else
>  static inline void usb_amd_quirk_pll_disable(void) {}
>  static inline void usb_amd_quirk_pll_enable(void) {}
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index 92eaff6..9bfd4ca11 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -94,6 +94,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
>  		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
>  		xhci->limit_active_eps = 64;
>  		xhci->quirks |= XHCI_SW_BW_CHECKING;
> +		/*
> +		 * PPT desktop boards DH77EB and DH77DF will power back on after
> +		 * a few seconds of being shutdown.  The fix for this is to
> +		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
> +		 * DMI information to find those particular boards (since each
> +		 * vendor will change the board name), so we have to key off all
> +		 * PPT chipsets.
> +		 */
> +		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
>  	}
>  	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
>  			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 95394e5..81aa10c 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -659,6 +659,9 @@ void xhci_shutdown(struct usb_hcd *hcd)
>  {
>  	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>  
> +	if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
> +		usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
> +
>  	spin_lock_irq(&xhci->lock);
>  	xhci_halt(xhci);
>  	spin_unlock_irq(&xhci->lock);
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index 96f49db..c713256 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1494,6 +1494,7 @@ struct xhci_hcd {
>  #define XHCI_TRUST_TX_LENGTH	(1 << 10)
>  #define XHCI_LPM_SUPPORT	(1 << 11)
>  #define XHCI_INTEL_HOST		(1 << 12)
> +#define XHCI_SPURIOUS_REBOOT	(1 << 13)
>  	unsigned int		num_active_eps;
>  	unsigned int		limit_active_eps;
>  	/* There are two roothubs to keep track of bus suspend info for */
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/