ed greatest stack depth: 5872 bytes left [ 0.334003] node 0 link 0: io port [1000, ffffff] [ 0.334003] node 0 link 0: io port [1000, 1fff] [ 0.334003] TOM: 0000000080000000 aka 2048M [ 0.334003] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.334003] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.334003] node 0 link 0: mmio [a0000, bffff] [ 0.334003] node 0 link 0: mmio [80000000, fe0bffff] ==> [80000000, dfffffff] and [f0000000, fe0bffff] [ 0.334003] bus: [00, 07] on node 0 link 0 [ 0.334003] bus: 00 index 0 [io 0x0000-0xffff] [ 0.334003] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.334003] bus: 00 index 2 [mem 0x80000000-0xdfffffff] [ 0.334003] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff] [ 0.334003] Extended Config Space enabled on 1 nodes [ 0.334003] ACPI: bus type pci registered [ 0.334003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.334003] PCI: not using MMCONFIG [ 0.334003] PCI: Using configuration type 1 for base access [ 0.336647] PCI: Using configuration type 1 for extended access [ 0.340057] bio: create slab at 0 [ 0.340190] ACPI: Added _OSI(Module Device) [ 0.340190] ACPI: Added _OSI(Processor Device) [ 0.340263] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.340399] ACPI: Added _OSI(Processor Aggregator Device) [ 0.341428] ACPI: EC: Look up EC in DSDT [ 0.341428] ACPI: Executed 1 blocks of module-level executable AML code [ 0.400181] ACPI: Interpreter enabled [ 0.400316] ACPI: (supports S0 S1 S3 S5) [ 0.400596] ACPI: Using IOAPIC for interrupt routing [ 0.400747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.401554] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.423360] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.423682] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.423885] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.423885] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.423885] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.423922] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.424151] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff] [ 0.424380] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.424643] pci 0000:00:00.0: [10de:0754] type 0 class 0x000500 [ 0.424893] pci 0000:00:01.0: [10de:075d] type 0 class 0x000601 [ 0.424899] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff] [ 0.424930] pci 0000:00:01.1: [10de:0752] type 0 class 0x000c05 [ 0.424940] pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f] [ 0.424953] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f] [ 0.424958] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f] [ 0.424985] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.424990] pci 0000:00:01.1: PME# disabled [ 0.424998] pci 0000:00:01.2: [10de:0751] type 0 class 0x000500 [ 0.425040] pci 0000:00:01.3: [10de:0753] type 0 class 0x000b40 [ 0.425055] pci 0000:00:01.3: reg 10: [mem 0xdff80000-0xdfffffff] [ 0.425055] pci 0000:00:01.4: [10de:0568] type 0 class 0x000500 [ 0.425055] pci 0000:00:02.0: [10de:077b] type 0 class 0x000c03 [ 0.425055] pci 0000:00:02.0: reg 10: [mem 0xdff7e000-0xdff7efff] [ 0.425055] pci 0000:00:02.0: supports D1 D2 [ 0.425055] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425055] pci 0000:00:02.0: PME# disabled [ 0.425055] pci 0000:00:02.1: [10de:077c] type 0 class 0x000c03 [ 0.425055] pci 0000:00:02.1: reg 10: [mem 0xdff7fc00-0xdff7fcff] [ 0.425055] pci 0000:00:02.1: supports D1 D2 [ 0.425055] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425055] pci 0000:00:02.1: PME# disabled [ 0.425055] pci 0000:00:04.0: [10de:077d] type 0 class 0x000c03 [ 0.425055] pci 0000:00:04.0: reg 10: [mem 0xdff7d000-0xdff7dfff] [ 0.425055] pci 0000:00:04.0: supports D1 D2 [ 0.425055] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425055] pci 0000:00:04.0: PME# disabled [ 0.425055] pci 0000:00:04.1: [10de:077e] type 0 class 0x000c03 [ 0.425055] pci 0000:00:04.1: reg 10: [mem 0xdff7f800-0xdff7f8ff] [ 0.425055] pci 0000:00:04.1: supports D1 D2 [ 0.425055] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425055] pci 0000:00:04.1: PME# disabled [ 0.425055] pci 0000:00:06.0: [10de:0759] type 0 class 0x000101 [ 0.425055] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf] [ 0.425055] pci 0000:00:07.0: [10de:0774] type 0 class 0x000403 [ 0.425055] pci 0000:00:07.0: reg 10: [mem 0xdff78000-0xdff7bfff] [ 0.425055] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.425055] pci 0000:00:07.0: PME# disabled [ 0.425055] pci 0000:00:08.0: [10de:075a] type 1 class 0x000604 [ 0.425055] pci 0000:00:09.0: [10de:0ad4] type 0 class 0x000106 [ 0.425055] pci 0000:00:09.0: reg 10: [io 0xb080-0xb087] [ 0.425055] pci 0000:00:09.0: reg 14: [io 0xb000-0xb003] [ 0.425055] pci 0000:00:09.0: reg 18: [io 0xac00-0xac07] [ 0.425055] pci 0000:00:09.0: reg 1c: [io 0xa880-0xa883] [ 0.425055] pci 0000:00:09.0: reg 20: [io 0xa800-0xa80f] [ 0.425055] pci 0000:00:09.0: reg 24: [mem 0xdff76000-0xdff77fff] [ 0.425055] pci 0000:00:0a.0: [10de:0760] type 0 class 0x000200 [ 0.425055] pci 0000:00:0a.0: reg 10: [mem 0xdff7c000-0xdff7cfff] [ 0.425055] pci 0000:00:0a.0: reg 14: [io 0xa480-0xa487] [ 0.425055] pci 0000:00:0a.0: reg 18: [mem 0xdff7f400-0xdff7f4ff] [ 0.425055] pci 0000:00:0a.0: reg 1c: [mem 0xdff7f000-0xdff7f00f] [ 0.425055] pci 0000:00:0a.0: supports D1 D2 [ 0.425055] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425055] pci 0000:00:0a.0: PME# disabled [ 0.425055] pci 0000:00:10.0: [10de:0778] type 1 class 0x000604 [ 0.425055] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425055] pci 0000:00:10.0: PME# disabled [ 0.425055] pci 0000:00:13.0: [10de:077a] type 1 class 0x000604 [ 0.425055] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425055] pci 0000:00:13.0: PME# disabled [ 0.425055] pci 0000:00:14.0: [10de:077a] type 1 class 0x000604 [ 0.425055] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425055] pci 0000:00:14.0: PME# disabled [ 0.425055] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.425055] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.425055] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.425055] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.425055] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.425055] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.425055] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.425055] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.425055] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.425055] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.425055] pci 0000:00:08.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode) [ 0.425055] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.425200] pci 0000:02:00.0: [10de:05b1] type 1 class 0x000604 [ 0.425234] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.425237] pci 0000:02:00.0: PME# disabled [ 0.425856] pci 0000:00:10.0: PCI bridge to [bus 02-06] [ 0.426005] pci 0000:00:10.0: bridge window [io 0xc000-0xefff] [ 0.426012] pci 0000:00:10.0: bridge window [mem 0xf0000000-0xfbffffff] [ 0.426025] pci 0000:00:10.0: bridge window [mem 0x90000000-0xcfffffff 64bit pref] [ 0.426049] pci 0000:03:00.0: [10de:05b1] type 1 class 0x000604 [ 0.426080] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.426082] pci 0000:03:00.0: PME# disabled [ 0.426094] pci 0000:03:02.0: [10de:05b1] type 1 class 0x000604 [ 0.426124] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold [ 0.426126] pci 0000:03:02.0: PME# disabled [ 0.426138] pci 0000:03:03.0: [10de:05b1] type 1 class 0x000604 [ 0.426168] pci 0000:03:03.0: PME# supported from D0 D3hot D3cold [ 0.426170] pci 0000:03:03.0: PME# disabled [ 0.426189] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.426330] pci 0000:02:00.0: bridge window [io 0xc000-0xefff] [ 0.426332] pci 0000:02:00.0: bridge window [mem 0xf0000000-0xfbffffff] [ 0.426336] pci 0000:02:00.0: bridge window [mem 0x90000000-0xcfffffff 64bit pref] [ 0.426361] pci 0000:04:00.0: [10de:0193] type 0 class 0x000300 [ 0.426370] pci 0000:04:00.0: reg 10: [mem 0xf3000000-0xf3ffffff] [ 0.426380] pci 0000:04:00.0: reg 14: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.426389] pci 0000:04:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit] [ 0.426396] pci 0000:04:00.0: reg 24: [io 0xcc00-0xcc7f] [ 0.426402] pci 0000:04:00.0: reg 30: [mem 0xf2fe0000-0xf2ffffff pref] [ 0.426440] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.429977] pci 0000:03:00.0: PCI bridge to [bus 04-04] [ 0.430118] pci 0000:03:00.0: bridge window [io 0xc000-0xcfff] [ 0.430120] pci 0000:03:00.0: bridge window [mem 0xf0000000-0xf3ffffff] [ 0.430124] pci 0000:03:00.0: bridge window [mem 0x90000000-0x9fffffff 64bit pref] [ 0.430151] pci 0000:05:00.0: [10de:0640] type 0 class 0x000300 [ 0.430160] pci 0000:05:00.0: reg 10: [mem 0xf7000000-0xf7ffffff] [ 0.430170] pci 0000:05:00.0: reg 14: [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.430180] pci 0000:05:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit] [ 0.430187] pci 0000:05:00.0: reg 24: [io 0xdc00-0xdc7f] [ 0.430193] pci 0000:05:00.0: reg 30: [mem 0xf6f80000-0xf6ffffff pref] [ 0.436646] pci 0000:03:02.0: PCI bridge to [bus 05-05] [ 0.436787] pci 0000:03:02.0: bridge window [io 0xd000-0xdfff] [ 0.436789] pci 0000:03:02.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.436792] pci 0000:03:02.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.436821] pci 0000:06:00.0: [10de:0611] type 0 class 0x000300 [ 0.436830] pci 0000:06:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.436840] pci 0000:06:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.436850] pci 0000:06:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.436857] pci 0000:06:00.0: reg 24: [io 0xec00-0xec7f] [ 0.436864] pci 0000:06:00.0: reg 30: [mem 0xfafe0000-0xfaffffff pref] [ 0.443311] pci 0000:03:03.0: PCI bridge to [bus 06-06] [ 0.443452] pci 0000:03:03.0: bridge window [io 0xe000-0xefff] [ 0.443454] pci 0000:03:03.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.443457] pci 0000:03:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.443614] pci 0000:00:13.0: PCI bridge to [bus 07-07] [ 0.443925] pci 0000:00:14.0: PCI bridge to [bus 08-08] [ 0.444127] pci_bus 0000:00: on NUMA node 0 [ 0.444129] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.444258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.444294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.444313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0.BR20._PRT] [ 0.444359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0.BR20.BR21._PRT] [ 0.444382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0.BR20.BR23._PRT] [ 0.444402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0.BR20.BR24._PRT] [ 0.444422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.444440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.444521] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.444771] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c [ 0.445004] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.453528] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.453842] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.454318] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.454793] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.456692] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.457128] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.457605] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *10 [ 0.458042] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *10 [ 0.458042] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.458042] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.458042] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.458112] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.458586] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled. [ 0.459062] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.459536] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.460020] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.460496] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11 [ 0.460932] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.461407] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.461882] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.462360] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15 [ 0.462797] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.463271] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.467057] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.467532] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.468007] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.468481] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.468956] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.469431] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.469906] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.470390] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.470865] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.471340] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.471815] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.472290] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.472764] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.473240] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15 [ 0.473687] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.474124] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15 [ 0.474561] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 0.474997] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled. [ 0.475474] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.475912] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7 [ 0.476352] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.476814] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.477291] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 0.477729] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 [ 0.478164] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.478164] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none [ 0.478164] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=none,locks=none [ 0.478164] vgaarb: loaded [ 0.478164] vgaarb: bridge control possible 0000:06:00.0 [ 0.478164] vgaarb: bridge control possible 0000:05:00.0 [ 0.478164] vgaarb: bridge control possible 0000:04:00.0 [ 0.478164] SCSI subsystem initialized [ 0.478164] libata version 3.00 loaded. [ 0.479995] usbcore: registered new interface driver usbfs [ 0.480131] usbcore: registered new interface driver hub [ 0.480131] usbcore: registered new device driver usb [ 0.480131] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.480131] PCI: Using ACPI for IRQ routing [ 0.483537] PCI: pci_cache_line_size set to 64 bytes [ 0.483609] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.483611] reserve RAM buffer: 000000007ff90000 - 000000007fffffff [ 0.486683] NetLabel: Initializing [ 0.486779] NetLabel: domain hash size = 128 [ 0.486913] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.487057] NetLabel: unlabeled traffic allowed by default [ 0.487199] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.487349] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.487626] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.503332] Switching to clocksource hpet [ 0.505586] pnp: PnP ACPI init [ 0.505604] ACPI: bus type pnp registered [ 0.505812] pnp 00:00: [bus 00-ff] [ 0.505814] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.505816] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.505817] pnp 00:00: [io 0x0d00-0xffff window] [ 0.505819] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.505820] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.505821] pnp 00:00: [mem 0x80000000-0xdfffffff window] [ 0.505822] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.505927] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.505946] pnp 00:01: [dma 4] [ 0.505947] pnp 00:01: [io 0x0000-0x000f] [ 0.505949] pnp 00:01: [io 0x0081-0x0083] [ 0.505950] pnp 00:01: [io 0x0087] [ 0.505951] pnp 00:01: [io 0x0089-0x008b] [ 0.505952] pnp 00:01: [io 0x008f] [ 0.505953] pnp 00:01: [io 0x00c0-0x00df] [ 0.505994] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.505999] pnp 00:02: [io 0x0061] [ 0.506038] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.506043] pnp 00:03: [io 0x00f0-0x00ff] [ 0.506053] pnp 00:03: [irq 13] [ 0.506092] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.506295] pnp 00:04: [mem 0x000d0000-0x000d3fff window] [ 0.506296] pnp 00:04: [mem 0x000d4000-0x000d7fff window] [ 0.506297] pnp 00:04: [mem 0x000de000-0x000dffff window] [ 0.506299] pnp 00:04: [io 0x0010-0x001f] [ 0.506300] pnp 00:04: [io 0x0022-0x003f] [ 0.506301] pnp 00:04: [io 0x0044-0x004d] [ 0.506302] pnp 00:04: [io 0x0050-0x005f] [ 0.506303] pnp 00:04: [io 0x0062-0x0063] [ 0.506304] pnp 00:04: [io 0x0065-0x006f] [ 0.506305] pnp 00:04: [io 0x0072-0x007f] [ 0.506306] pnp 00:04: [io 0x0080] [ 0.506307] pnp 00:04: [io 0x0084-0x0086] [ 0.506308] pnp 00:04: [io 0x0088] [ 0.506309] pnp 00:04: [io 0x008c-0x008e] [ 0.506310] pnp 00:04: [io 0x0090-0x009f] [ 0.506312] pnp 00:04: [io 0x00a2-0x00bf] [ 0.506313] pnp 00:04: [io 0x00e0-0x00ef] [ 0.506314] pnp 00:04: [io 0x04d0-0x04d1] [ 0.506315] pnp 00:04: [io 0x0800-0x080f] [ 0.506316] pnp 00:04: [io 0x0500-0x057f] [ 0.506317] pnp 00:04: [io 0x0580-0x05ff] [ 0.506318] pnp 00:04: [io 0x0800-0x087f] [ 0.506319] pnp 00:04: [io 0x0880-0x08ff] [ 0.506321] pnp 00:04: [io 0x0d00-0x0d7f] [ 0.506322] pnp 00:04: [io 0x0d80-0x0dff] [ 0.506324] pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.506325] pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.506326] pnp 00:04: [mem 0xfed04000-0xfed04fff] [ 0.506328] pnp 00:04: [mem 0xfee01000-0xfeefffff] [ 0.506423] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.506565] system 00:04: [io 0x0800-0x080f] has been reserved [ 0.506736] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.506879] system 00:04: [io 0x0580-0x05ff] has been reserved [ 0.507021] system 00:04: [io 0x0800-0x087f] could not be reserved [ 0.507164] system 00:04: [io 0x0880-0x08ff] has been reserved [ 0.507306] system 00:04: [io 0x0d00-0x0d7f] has been reserved [ 0.507448] system 00:04: [io 0x0d80-0x0dff] has been reserved [ 0.507590] system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.507818] system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.508047] system 00:04: [mem 0x000de000-0x000dffff window] has been reserved [ 0.508277] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.508422] system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.508567] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.508634] pnp 00:05: [mem 0xfed00000-0xfed00fff] [ 0.508636] pnp 00:05: [irq 2 disabled] [ 0.508642] pnp 00:05: [irq 8] [ 0.508723] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.508737] pnp 00:06: [io 0x0070-0x0071] [ 0.508788] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.508834] pnp 00:07: [mem 0xfec00000-0xfec00fff] [ 0.508835] pnp 00:07: [mem 0xfee00000-0xfee00fff] [ 0.508897] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.509044] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.509189] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.509205] pnp 00:08: [io 0x0060] [ 0.509207] pnp 00:08: [io 0x0064] [ 0.509213] pnp 00:08: [irq 1] [ 0.509269] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.509379] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] [ 0.509380] pnp 00:09: [io 0x0230-0x023f] [ 0.509381] pnp 00:09: [io 0x0290-0x029f] [ 0.509382] pnp 00:09: [io 0x0a00-0x0a0f] [ 0.509383] pnp 00:09: [io 0x0a10-0x0a1f] [ 0.509446] system 00:09: [io 0x0230-0x023f] has been reserved [ 0.509588] system 00:09: [io 0x0290-0x029f] has been reserved [ 0.509730] system 00:09: [io 0x0a00-0x0a0f] has been reserved [ 0.509872] system 00:09: [io 0x0a10-0x0a1f] has been reserved [ 0.510031] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.510216] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.510294] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.510440] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.510531] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.510533] pnp 00:0b: [mem 0x000c0000-0x000cffff] [ 0.510534] pnp 00:0b: [mem 0x000e0000-0x000fffff] [ 0.510535] pnp 00:0b: [mem 0x00100000-0x7fffffff] [ 0.510536] pnp 00:0b: [mem 0xfec00000-0xffffffff] [ 0.510606] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.510753] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.510899] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.511045] system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.511192] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.511338] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.511712] pnp: PnP ACPI: found 12 devices [ 0.511846] ACPI: ACPI bus type pnp unregistered [ 0.521429] PCI: max bus depth: 3 pci_try_num: 4 [ 0.521498] pci 0000:00:08.0: PCI bridge to [bus 01-01] [ 0.521642] pci 0000:03:00.0: PCI bridge to [bus 04-04] [ 0.521781] pci 0000:03:00.0: bridge window [io 0xc000-0xcfff] [ 0.521925] pci 0000:03:00.0: bridge window [mem 0xf0000000-0xf3ffffff] [ 0.522072] pci 0000:03:00.0: bridge window [mem 0x90000000-0x9fffffff 64bit pref] [ 0.522305] pci 0000:03:02.0: PCI bridge to [bus 05-05] [ 0.522444] pci 0000:03:02.0: bridge window [io 0xd000-0xdfff] [ 0.522587] pci 0000:03:02.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.522734] pci 0000:03:02.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.522967] pci 0000:03:03.0: PCI bridge to [bus 06-06] [ 0.523107] pci 0000:03:03.0: bridge window [io 0xe000-0xefff] [ 0.523250] pci 0000:03:03.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.523426] pci 0000:03:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.523659] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.523798] pci 0000:02:00.0: bridge window [io 0xc000-0xefff] [ 0.523942] pci 0000:02:00.0: bridge window [mem 0xf0000000-0xfbffffff] [ 0.524089] pci 0000:02:00.0: bridge window [mem 0x90000000-0xcfffffff 64bit pref] [ 0.524322] pci 0000:00:10.0: PCI bridge to [bus 02-06] [ 0.524463] pci 0000:00:10.0: bridge window [io 0xc000-0xefff] [ 0.524612] pci 0000:00:10.0: bridge window [mem 0xf0000000-0xfbffffff] [ 0.524763] pci 0000:00:10.0: bridge window [mem 0x90000000-0xcfffffff 64bit pref] [ 0.525003] pci 0000:00:13.0: PCI bridge to [bus 07-07] [ 0.525164] pci 0000:00:14.0: PCI bridge to [bus 08-08] [ 0.525328] pci 0000:00:08.0: setting latency timer to 64 [ 0.525437] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.525587] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.525824] pci 0000:00:10.0: setting latency timer to 64 [ 0.525830] pci 0000:02:00.0: setting latency timer to 64 [ 0.525834] pci 0000:03:00.0: setting latency timer to 64 [ 0.525838] pci 0000:03:02.0: setting latency timer to 64 [ 0.525842] pci 0000:03:03.0: setting latency timer to 64 [ 0.525936] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18 [ 0.526083] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18 [ 0.526320] pci 0000:00:13.0: setting latency timer to 64 [ 0.526412] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17 [ 0.526559] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17 [ 0.526832] pci 0000:00:14.0: setting latency timer to 64 [ 0.526837] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.526838] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.526840] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.526841] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.526843] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff] [ 0.526844] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.526846] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.526847] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.526848] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.526850] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.526851] pci_bus 0000:01: resource 8 [mem 0x80000000-0xdfffffff] [ 0.526853] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.526854] pci_bus 0000:02: resource 0 [io 0xc000-0xefff] [ 0.526856] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xfbffffff] [ 0.526857] pci_bus 0000:02: resource 2 [mem 0x90000000-0xcfffffff 64bit pref] [ 0.526859] pci_bus 0000:03: resource 0 [io 0xc000-0xefff] [ 0.526860] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xfbffffff] [ 0.526862] pci_bus 0000:03: resource 2 [mem 0x90000000-0xcfffffff 64bit pref] [ 0.526863] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.526864] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff] [ 0.526866] pci_bus 0000:04: resource 2 [mem 0x90000000-0x9fffffff 64bit pref] [ 0.526868] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.526869] pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.526870] pci_bus 0000:05: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.526872] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.526873] pci_bus 0000:06: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.526875] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.526897] NET: Registered protocol family 2 [ 0.527065] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.527430] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.528591] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.528977] TCP: Hash tables configured (established 262144 bind 65536) [ 0.529122] TCP reno registered [ 0.529252] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.529405] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.529602] NET: Registered protocol family 1 [ 0.529839] RPC: Registered named UNIX socket transport module. [ 0.529983] RPC: Registered udp transport module. [ 0.530145] RPC: Registered tcp transport module. [ 0.530281] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.530589] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 0.530740] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 0.616945] pci 0000:00:02.0: PCI INT A disabled [ 0.617207] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.617357] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.617598] pci 0000:00:02.1: PCI INT B disabled [ 0.617824] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21 [ 0.617971] pci 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21 [ 0.683604] pci 0000:00:04.0: PCI INT A disabled [ 0.683860] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20 [ 0.684009] pci 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20 [ 0.684249] pci 0000:00:04.1: PCI INT B disabled [ 0.684480] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.684710] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.684946] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.685278] pci 0000:04:00.0: Boot video device [ 0.685297] PCI: CLS 64 bytes, default 64 [ 0.686714] IBS: LVT offset 1 assigned [ 0.686864] perf: AMD IBS detected (0x0000001f) [ 0.687581] microcode: CPU0: patch_level=0x01000086 [ 0.687722] microcode: CPU1: patch_level=0x01000086 [ 0.687871] microcode: CPU2: patch_level=0x01000086 [ 0.688021] microcode: CPU3: patch_level=0x01000086 [ 0.688241] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.688718] audit: initializing netlink socket (disabled) [ 0.688864] type=2000 audit(1344547905.686:1): initialized [ 0.708327] VFS: Disk quotas dquot_6.5.2 [ 0.710127] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.710807] Registering the id_resolver key type [ 0.711360] fuse init (API version 7.17) [ 0.711648] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 0.712415] SGI XFS Quota Management subsystem [ 0.712554] msgmni has been set to 4003 [ 0.712783] SELinux: Registering netfilter hooks [ 0.713434] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.713664] io scheduler noop registered [ 0.713796] io scheduler deadline registered [ 0.714019] io scheduler cfq registered (default) [ 0.714932] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.715166] ACPI: Power Button [PWRB] [ 0.715394] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.715624] ACPI: Power Button [PWRF] [ 0.715888] ACPI: processor limited to max C-state 1 [ 0.718806] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.907581] ahci 0000:00:09.0: version 3.0 [ 0.907683] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.907827] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.908082] ahci 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.908086] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP [ 0.908272] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.908506] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh [ 0.908651] ahci 0000:00:09.0: setting latency timer to 64 [ 0.909781] scsi0 : ahci [ 0.910059] scsi1 : ahci [ 0.910313] scsi2 : ahci [ 0.910566] scsi3 : ahci [ 0.910819] scsi4 : ahci [ 0.911074] scsi5 : ahci [ 0.911349] ata1: SATA max UDMA/133 abar m8192@0xdff76000 port 0xdff76100 irq 40 [ 0.911578] ata2: SATA max UDMA/133 abar m8192@0xdff76000 port 0xdff76180 irq 40 [ 0.911807] ata3: SATA max UDMA/133 abar m8192@0xdff76000 port 0xdff76200 irq 40 [ 0.912037] ata4: SATA max UDMA/133 abar m8192@0xdff76000 port 0xdff76280 irq 40 [ 0.912266] ata5: SATA max UDMA/133 abar m8192@0xdff76000 port 0xdff76300 irq 40 [ 0.912496] ata6: SATA max UDMA/133 abar m8192@0xdff76000 port 0xdff76380 irq 40 [ 0.913152] pata_amd 0000:00:06.0: version 0.4.1 [ 0.913174] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.913646] scsi6 : pata_amd [ 0.913892] scsi7 : pata_amd [ 0.914654] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.914801] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.915402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.915547] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.915557] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.915799] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.915801] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.916045] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.916278] ehci_hcd 0000:00:02.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6 [ 0.916284] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 [ 0.916286] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park [ 0.916295] ehci_hcd 0000:00:02.1: park 0 [ 0.916299] ehci_hcd 0000:00:02.1: debug port 1 [ 0.916436] ehci_hcd 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 0.916442] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.916444] ehci_hcd 0000:00:02.1: supports USB remote wakeup [ 0.916458] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdff7fc00 [ 0.916600] ehci_hcd 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 0.916605] ehci_hcd 0000:00:02.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 0.923607] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.923767] usb usb1: default language 0x0409 [ 0.923771] usb usb1: udev 1, busnum 1, minor = 0 [ 0.923773] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.923918] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.924147] usb usb1: Product: EHCI Host Controller [ 0.924284] usb usb1: Manufacturer: Linux 3.2.23 ehci_hcd [ 0.924423] usb usb1: SerialNumber: 0000:00:02.1 [ 0.924679] usb usb1: usb_probe_device [ 0.924681] usb usb1: configuration #1 chosen from 1 choice [ 0.924686] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.924733] hub 1-0:1.0: usb_probe_interface [ 0.924734] hub 1-0:1.0: usb_probe_interface - got id [ 0.924736] hub 1-0:1.0: USB hub found [ 0.924870] hub 1-0:1.0: 6 ports detected [ 0.925003] hub 1-0:1.0: standalone hub [ 0.925004] hub 1-0:1.0: no power switching (usb 1.0) [ 0.925005] hub 1-0:1.0: individual port over-current protection [ 0.925006] hub 1-0:1.0: power on to power good time: 20ms [ 0.925009] hub 1-0:1.0: local power source is good [ 0.925010] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.925048] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20 [ 0.925287] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.925288] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.925521] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.925753] ehci_hcd 0000:00:04.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6 [ 0.925759] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 0 [ 0.925761] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park [ 0.925769] ehci_hcd 0000:00:04.1: park 0 [ 0.925773] ehci_hcd 0000:00:04.1: debug port 1 [ 0.925909] ehci_hcd 0000:00:04.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 0.925915] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.925916] ehci_hcd 0000:00:04.1: supports USB remote wakeup [ 0.925929] ehci_hcd 0000:00:04.1: irq 20, io mem 0xdff7f800 [ 0.926071] ehci_hcd 0000:00:04.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 0.926076] ehci_hcd 0000:00:04.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 0.933623] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.933784] usb usb2: default language 0x0409 [ 0.933787] usb usb2: udev 1, busnum 2, minor = 128 [ 0.933789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.933934] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.934162] usb usb2: Product: EHCI Host Controller [ 0.934299] usb usb2: Manufacturer: Linux 3.2.23 ehci_hcd [ 0.934438] usb usb2: SerialNumber: 0000:00:04.1 [ 0.934686] usb usb2: usb_probe_device [ 0.934687] usb usb2: configuration #1 chosen from 1 choice [ 0.934690] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.934736] hub 2-0:1.0: usb_probe_interface [ 0.934737] hub 2-0:1.0: usb_probe_interface - got id [ 0.934738] hub 2-0:1.0: USB hub found [ 0.934872] hub 2-0:1.0: 6 ports detected [ 0.935005] hub 2-0:1.0: standalone hub [ 0.935006] hub 2-0:1.0: no power switching (usb 1.0) [ 0.935007] hub 2-0:1.0: individual port over-current protection [ 0.935008] hub 2-0:1.0: power on to power good time: 20ms [ 0.935010] hub 2-0:1.0: local power source is good [ 0.935011] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.935082] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.935226] ohci_hcd: block sizes: ed 80 td 96 [ 0.935235] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 0.935475] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.935477] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.935709] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.935951] ohci_hcd 0000:00:02.0: created debug files [ 0.935952] ohci_hcd 0000:00:02.0: supports USB remote wakeup [ 0.935966] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdff7e000 [ 0.988962] ohci_hcd 0000:00:02.0: OHCI controller state [ 0.988964] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers [ 0.988966] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 0.988968] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 [ 0.988971] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF [ 0.988973] ohci_hcd 0000:00:02.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 0.988977] ohci_hcd 0000:00:02.0: hcca frame #0003 [ 0.988979] ohci_hcd 0000:00:02.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6) [ 0.988982] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 0.988984] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE [ 0.988987] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS [ 0.988989] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS [ 0.988992] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS [ 0.988994] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS [ 0.988996] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS [ 0.988999] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS [ 0.989003] usb usb3: default language 0x0409 [ 0.989007] usb usb3: udev 1, busnum 3, minor = 256 [ 0.989008] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.989153] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.989381] usb usb3: Product: OHCI Host Controller [ 0.989518] usb usb3: Manufacturer: Linux 3.2.23 ohci_hcd [ 0.989658] usb usb3: SerialNumber: 0000:00:02.0 [ 0.989909] usb usb3: usb_probe_device [ 0.989910] usb usb3: configuration #1 chosen from 1 choice [ 0.989913] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.989959] hub 3-0:1.0: usb_probe_interface [ 0.989960] hub 3-0:1.0: usb_probe_interface - got id [ 0.989962] hub 3-0:1.0: USB hub found [ 0.990125] hub 3-0:1.0: 6 ports detected [ 0.990259] hub 3-0:1.0: standalone hub [ 0.990260] hub 3-0:1.0: no power switching (usb 1.0) [ 0.990261] hub 3-0:1.0: no over-current protection [ 0.990262] hub 3-0:1.0: power on to power good time: 2ms [ 0.990264] hub 3-0:1.0: local power source is good [ 0.990266] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.990290] ehci_hcd 0000:00:02.1: HS companion for 0000:00:02.0 [ 0.990302] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21 [ 0.990540] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.990542] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.990773] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.991009] ohci_hcd 0000:00:04.0: created debug files [ 0.991010] ohci_hcd 0000:00:04.0: supports USB remote wakeup [ 0.991023] ohci_hcd 0000:00:04.0: irq 21, io mem 0xdff7d000 [ 1.023608] ehci_hcd 0000:00:02.1: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.023611] hub 1-0:1.0: port 1: status 0501 change 0001 [ 1.033605] ehci_hcd 0000:00:04.1: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT [ 1.033607] hub 2-0:1.0: port 2: status 0501 change 0001 [ 1.045610] ohci_hcd 0000:00:04.0: OHCI controller state [ 1.045612] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers [ 1.045614] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 1.045616] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0 [ 1.045618] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF [ 1.045620] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.045624] ohci_hcd 0000:00:04.0: hcca frame #0003 [ 1.045626] ohci_hcd 0000:00:04.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6) [ 1.045629] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.045631] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE [ 1.045633] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS [ 1.045636] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS [ 1.045638] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS [ 1.045641] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS [ 1.045643] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS [ 1.045646] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS [ 1.045650] usb usb4: default language 0x0409 [ 1.045653] usb usb4: udev 1, busnum 4, minor = 384 [ 1.045654] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.045800] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.046028] usb usb4: Product: OHCI Host Controller [ 1.046165] usb usb4: Manufacturer: Linux 3.2.23 ohci_hcd [ 1.046304] usb usb4: SerialNumber: 0000:00:04.0 [ 1.046556] usb usb4: usb_probe_device [ 1.046558] usb usb4: configuration #1 chosen from 1 choice [ 1.046561] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.046607] hub 4-0:1.0: usb_probe_interface [ 1.046608] hub 4-0:1.0: usb_probe_interface - got id [ 1.046609] hub 4-0:1.0: USB hub found [ 1.046775] hub 4-0:1.0: 6 ports detected [ 1.046908] hub 4-0:1.0: standalone hub [ 1.046909] hub 4-0:1.0: no power switching (usb 1.0) [ 1.046910] hub 4-0:1.0: no over-current protection [ 1.046912] hub 4-0:1.0: power on to power good time: 2ms [ 1.046914] hub 4-0:1.0: local power source is good [ 1.046915] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.046940] ehci_hcd 0000:00:04.1: HS companion for 0000:00:04.0 [ 1.047038] usbcore: registered new interface driver libusual [ 1.047266] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.047412] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.047895] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.048165] mousedev: PS/2 mouse device common for all mice [ 1.048570] rtc_cmos 00:06: RTC can wake from S4 [ 1.048916] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.049107] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.049304] cpuidle: using governor ladder [ 1.049438] cpuidle: using governor menu [ 1.049571] EFI Variables Facility v0.08 2004-May-17 [ 1.049892] usbcore: registered new interface driver usbhid [ 1.050063] usbhid: USB HID core driver [ 1.050574] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0 [ 1.050723] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0 [ 1.050966] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 1.051109] snd_hda_intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 1.051344] hda_intel: Disabling MSI [ 1.051484] snd_hda_intel 0000:00:07.0: setting latency timer to 64 [ 1.069309] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.090284] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.123602] hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 1.123607] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.129968] ata7.00: ATA-7: ST3500630A, 3.AAE, max UDMA/100 [ 1.130155] ata7.00: 976773168 sectors, multi 16: LBA48 [ 1.130299] ata7.01: ATAPI: L-D-TV-O D8162B, 0015, max UDMA/33 [ 1.130446] ata7: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15) [ 1.130449] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15) [ 1.177130] ehci_hcd 0000:00:02.1: port 1 high speed [ 1.177133] ehci_hcd 0000:00:02.1: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.196513] ata7.00: configured for UDMA/100 [ 1.210507] ata7.01: configured for UDMA/33 [ 1.230271] ata3: SATA link down (SStatus 0 SControl 300) [ 1.230421] ata1: SATA link down (SStatus 0 SControl 300) [ 1.230572] ata5: SATA link down (SStatus 0 SControl 300) [ 1.230722] ata6: SATA link down (SStatus 0 SControl 300) [ 1.230731] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.283830] ehci_hcd 0000:00:02.1: port 1 high speed [ 1.283833] ehci_hcd 0000:00:02.1: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.354627] usb 1-1: udev 2, busnum 1, minor = 1 [ 1.354629] usb 1-1: New USB device found, idVendor=0409, idProduct=005a [ 1.354774] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.355034] usb 1-1: usb_probe_device [ 1.355036] usb 1-1: configuration #1 chosen from 1 choice [ 1.355379] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 1.355432] hub 1-1:1.0: usb_probe_interface [ 1.355433] hub 1-1:1.0: usb_probe_interface - got id [ 1.355435] hub 1-1:1.0: USB hub found [ 1.355903] hub 1-1:1.0: 4 ports detected [ 1.356036] hub 1-1:1.0: standalone hub [ 1.356038] hub 1-1:1.0: individual port power switching [ 1.356039] hub 1-1:1.0: individual port over-current protection [ 1.356040] hub 1-1:1.0: Single TT [ 1.356041] hub 1-1:1.0: TT requires at most 16 FS bit times (1332 ns) [ 1.356042] hub 1-1:1.0: Port indicators are supported [ 1.356043] hub 1-1:1.0: power on to power good time: 0ms [ 1.356739] hub 1-1:1.0: local power source is good [ 1.356740] hub 1-1:1.0: enabling power on all ports [ 1.358243] hub 2-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 1.358246] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 1.358251] ehci_hcd 0000:00:04.1: port 2 low speed --> companion [ 1.410259] ehci_hcd 0000:00:04.1: GetStatus port:2 status 003402 0 ACK POWER OWNER sig=k CSC [ 1.410269] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0004 [ 1.410273] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS [ 1.410275] hub 4-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 1.458356] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.530251] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 1.556917] usb 1-1: link qh256-0001/ffff88007c9c9380 start 1 [1/0 us] [ 1.580251] hda_codec: ALC1200: BIOS auto-probing. [ 1.636930] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS [ 1.686945] Refined TSC clocksource calibration: 3173.333 MHz. [ 1.687091] Switching to clocksource tsc [ 1.690568] usb 4-2: new low-speed USB device number 2 using ohci_hcd [ 1.796904] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS [ 1.875851] usb 4-2: skipped 1 descriptor after interface [ 1.878843] usb 4-2: default language 0x0409 [ 1.886853] usb 4-2: udev 2, busnum 4, minor = 385 [ 1.886854] usb 4-2: New USB device found, idVendor=045e, idProduct=00cb [ 1.887002] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.887149] usb 4-2: Product: Microsoft Basic Optical Mouse v2.0 [ 1.887291] usb 4-2: Manufacturer: Microsoft [ 1.887513] usb 4-2: usb_probe_device [ 1.887515] usb 4-2: configuration #1 chosen from 1 choice [ 1.889852] usb 4-2: adding 4-2:1.0 (config #1, interface 0) [ 1.889892] usbhid 4-2:1.0: usb_probe_interface [ 1.889893] usbhid 4-2:1.0: usb_probe_interface - got id [ 1.896989] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input3 [ 1.897353] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:04.0-2/input0 [ 1.897628] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004 [ 1.897633] hub 1-1:1.0: state 7 ports 4 chg 0010 evt 0000 [ 1.898010] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.910977] hub 1-1:1.0: port 4 not reset yet, waiting 10ms [ 1.923571] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.923723] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.924740] ata2.00: ATA-7: Maxtor 6Y160M0, YAR51EW0, max UDMA/133 [ 1.924884] ata2.00: 320173056 sectors, multi 0: LBA48 [ 1.925027] ata4.00: ATA-7: Maxtor 6Y160M0, YAR51EW0, max UDMA/133 [ 1.925171] ata4.00: 320173056 sectors, multi 0: LBA48 [ 1.926317] ata2.00: configured for UDMA/133 [ 1.926555] scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y160M0 YAR5 PQ: 0 ANSI: 5 [ 1.926802] ata4.00: configured for UDMA/133 [ 1.926939] sd 1:0:0:0: [sda] 320173056 512-byte logical blocks: (163 GB/152 GiB) [ 1.926997] sd 1:0:0:0: [sda] Write Protect is off [ 1.926999] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.927019] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.927646] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.927901] scsi 3:0:0:0: Direct-Access ATA Maxtor 6Y160M0 YAR5 PQ: 0 ANSI: 5 [ 1.928280] sd 3:0:0:0: [sdb] 320173056 512-byte logical blocks: (163 GB/152 GiB) [ 1.928565] sd 3:0:0:0: [sdb] Write Protect is off [ 1.928608] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 1.928714] scsi 6:0:0:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5 [ 1.928839] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.928880] sd 6:0:0:0: [sdc] Write Protect is off [ 1.928882] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.928902] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.928909] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1.931376] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.931387] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.943599] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device [ 1.948560] sda: sda1 sda2 sda3 sda4 [ 1.948994] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.951260] sdb: sdb1 sdb2 [ 1.951562] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.963192] scsi 6:0:1:0: CD-ROM H - T-S D D-R M G R8162 0015 PQ: 0 ANSI: 5 [ 1.977916] usb 1-1.4: new full-speed USB device number 3 using ehci_hcd [ 1.990599] hub 1-1:1.0: port 4 not reset yet, waiting 10ms [ 1.991904] sr0: scsi-1 drive [ 1.992046] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.992282] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 1.992354] sr 6:0:1:0: Attached scsi generic sg3 type 5 [ 1.992550] ata8: port disabled--ignoring [ 2.034390] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 > [ 2.034929] sd 6:0:0:0: [sdc] Attached SCSI disk [ 2.078726] usb 1-1.4: udev 3, busnum 1, minor = 2 [ 2.078728] usb 1-1.4: New USB device found, idVendor=0a21, idProduct=8001 [ 2.078875] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.079190] usb 1-1.4: usb_probe_device [ 2.079191] usb 1-1.4: configuration #1 chosen from 1 choice [ 2.079728] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 2.079781] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0004 [ 2.079785] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0010 [ 2.433914] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input4 [ 2.467011] ALSA device list: [ 2.467139] #0: HDA NVidia at 0xdff78000 irq 22 [ 2.467332] Netfilter messages via NETLINK v0.30. [ 2.467480] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.467919] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.468081] TCP cubic registered [ 2.468210] Initializing XFRM netlink socket [ 2.468518] NET: Registered protocol family 10 [ 2.468923] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.469091] IPv6 over IPv4 tunneling driver [ 2.469552] NET: Registered protocol family 17 [ 2.469693] Registering the dns_resolver key type [ 2.469991] registered taskstats version 1 [ 2.470475] Magic number: 8:394:550 [ 2.470644] pci_link PNP0C0F:01: hash matches [ 2.470812] powernow-k8: Found 1 AMD Phenom(tm) II X4 920 Processor (4 cpu cores) (version 2.20.00) [ 2.471069] powernow-k8: 0 : pstate 0 (2800 MHz) [ 2.471206] powernow-k8: 1 : pstate 1 (2100 MHz) [ 2.471343] powernow-k8: 2 : pstate 2 (1600 MHz) [ 2.471480] powernow-k8: 3 : pstate 3 (800 MHz) [ 2.636549] XFS (sdc6): Mounting Filesystem [ 2.802132] XFS (sdc6): Starting recovery (logdev: internal) [ 3.340348] hub 3-0:1.0: hub_suspend [ 3.340360] usb usb3: bus auto-suspend, wakeup 1 [ 3.340366] ohci_hcd 0000:00:02.0: suspend root hub [ 3.488158] XFS (sdc6): Ending recovery (logdev: internal) [ 3.488329] VFS: Mounted root (xfs filesystem) readonly on device 8:38. [ 3.523763] devtmpfs: mounted [ 3.525622] Freeing unused kernel memory: 464k freed [ 3.525959] Write protecting the kernel read-only data: 8192k [ 3.528304] Freeing unused kernel memory: 252k freed [ 3.529461] Freeing unused kernel memory: 108k freed [ 4.320321] hub 2-0:1.0: hub_suspend [ 4.320333] usb usb2: bus auto-suspend, wakeup 1 [ 4.320339] ehci_hcd 0000:00:04.1: suspend root hub [ 4.410547] cat used greatest stack depth: 5096 bytes left [ 4.520837] setfont used greatest stack depth: 4888 bytes left [ 4.574209] init-early.sh used greatest stack depth: 4728 bytes left [ 12.982749] systemd-udevd[1005]: starting version 186 [ 13.869278] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 13.869283] ACPI: resource nForce2_smbus [io 0x0700-0x073f] conflicts with ACPI region SM00 [io 0x700-0x73f] [ 13.869284] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.016948] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 14.017351] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 14.017363] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 14.017372] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 14.081979] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:6b:67:2a [ 14.081988] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim desc-v3 [ 15.698337] nvidia: module license 'NVIDIA' taints kernel. [ 15.698349] nvidia: module license 'NVIDIA' taints kernel. [ 15.698361] nvidia: module license 'NVIDIA' taints kernel. [ 15.698371] Disabling lock debugging due to kernel taint [ 15.758893] nvidia 0000:04:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 15.758901] nvidia 0000:04:00.0: setting latency timer to 64 [ 15.758905] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 15.758907] vgaarb: transferring owner from PCI:0000:04:00.0 to PCI:0000:06:00.0 [ 15.759017] nvidia 0000:05:00.0: enabling device (0000 -> 0003) [ 15.759157] ACPI: PCI Interrupt Link [LN0C] enabled at IRQ 16 [ 15.759169] nvidia 0000:05:00.0: PCI INT A -> Link[LN0C] -> GSI 16 (level, low) -> IRQ 16 [ 15.759174] nvidia 0000:05:00.0: setting latency timer to 64 [ 15.759184] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=none [ 15.759285] nvidia 0000:06:00.0: enabling device (0000 -> 0003) [ 15.759377] ACPI: PCI Interrupt Link [LN0D] enabled at IRQ 19 [ 15.759379] nvidia 0000:06:00.0: PCI INT A -> Link[LN0D] -> GSI 19 (level, low) -> IRQ 19 [ 15.759384] nvidia 0000:06:00.0: setting latency timer to 64 [ 15.759393] vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=none [ 15.759481] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012 [ 43.423732] forcedeth 0000:00:0a.0: PCI INT A disabled [ 108.216066] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 108.216099] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 108.216109] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 108.275280] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:6b:67:2a [ 108.275289] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim desc-v3 [ 565.745883] runscript.sh used greatest stack depth: 4600 bytes left [ 566.286734] Adding 3204932k swap on /dev/sdc8. Priority:-1 extents:1 across:3204932k [ 566.300503] Adding 2000056k swap on /dev/sda1. Priority:-2 extents:1 across:2000056k [ 566.311912] Adding 2000056k swap on /dev/sdb1. Priority:-3 extents:1 across:2000056k [ 566.864647] EXT4-fs (sdc7): mounting ext2 file system using the ext4 subsystem [ 566.883104] EXT4-fs (sdc7): warning: mounting unchecked fs, running e2fsck is recommended [ 566.886446] EXT4-fs (sdc7): mounted filesystem without journal. Opts: (null) [ 566.924474] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 566.933486] EXT4-fs (sda3): warning: mounting unchecked fs, running e2fsck is recommended [ 566.935350] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null) [ 839.328806] tar used greatest stack depth: 4560 bytes left [ 852.730225] CE: hpet increased min_delta_ns to 11520 nsec [ 864.125742] collect2 used greatest stack depth: 4328 bytes left [ 1005.876668] forcedeth 0000:00:0a.0: PCI INT A disabled [ 1043.115823] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1043.115858] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 1043.115868] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1043.178529] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:6b:67:2a [ 1043.178539] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim desc-v3 [ 1470.133551] flush-8:32 used greatest stack depth: 3728 bytes left [ 2247.149862] forcedeth 0000:00:0a.0: PCI INT A disabled [ 2250.284833] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2250.284872] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 2250.284882] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 2250.345054] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:6b:67:2a [ 2250.345064] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim desc-v3 [ 3565.993069] forcedeth 0000:00:0a.0: PCI INT A disabled [ 3569.296204] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 3569.296244] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 3569.296254] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 3569.358267] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:6b:67:2a [ 3569.358276] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim desc-v3 [ 4520.699646] forcedeth 0000:00:0a.0: PCI INT A disabled [ 4929.427672] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 4929.427706] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 4929.427716] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 4929.488136] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:6b:67:2a [ 4929.488145] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim desc-v3 [ 5020.399580] forcedeth 0000:00:0a.0: PCI INT A disabled [ 5042.561695] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 5042.561729] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 5042.561739] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 5042.621450] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:6b:67:2a [ 5042.621459] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 5071.049589] forcedeth 0000:00:0a.0: PCI INT A disabled [ 5077.585933] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 5077.585966] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 5077.585976] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 5077.648100] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:6b:67:2a [ 5077.648109] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim desc-v3 [ 5397.079798] flush-8:32 used greatest stack depth: 3616 bytes left