[ 0.000000] Linux version 3.6.0-rc1-00214-gf5addb9 (kbuild@snb) (gcc version 4.7.1 (Debian 4.7.1-6) ) #5 PREEMPT Thu Aug 9 15:20:18 CST 2012 [ 0.000000] Command line: trinity=3m hung_task_panic=1 branch=net/master log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2012-08-09-15-20-57-net:master:f5addb9-f5addb9-x86_64-randconfig-s040-7-waimea-retry-ant noapic nolapic BOOT_IMAGE=kernel-tests/kernels/x86_64-randconfig-s040/f5addb9/vmlinuz-3.6.0-rc1-00214-gf5addb9 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093bff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000093c00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff88000008d000] 8d000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x0fffdfff] [ 0.000000] [mem 0x00000000-0x0fffdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0xfffdfff @ [mem 0x0e854000-0x0e8d5fff] [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 128516(98%) [ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd930 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000fffff40 00040 [ 0.000000] ACPI: SSDT 000000000ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 000000000ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00092fff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65409 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3901 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 960 pages used for memmap [ 0.000000] DMA32 zone: 60478 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] No local APIC present [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000093000 - 0000000000094000 [ 0.000000] PM: Registered nosave memory: 0000000000094000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] e820: [mem 0x10000000-0xfffbffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64379 [ 0.000000] Kernel command line: trinity=3m hung_task_panic=1 branch=net/master log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2012-08-09-15-20-57-net:master:f5addb9-f5addb9-x86_64-randconfig-s040-7-waimea-retry-ant noapic nolapic BOOT_IMAGE=kernel-tests/kernels/x86_64-randconfig-s040/f5addb9/vmlinuz-3.6.0-rc1-00214-gf5addb9 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 183860k/262136k available (13477k kernel code, 500k absent, 77776k reserved, 13450k data, 764k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5823 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: using HPET reference calibration [ 0.000000] tsc: Detected 3192.005 MHz processor [ 0.037044] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.01 BogoMIPS (lpj=12768020) [ 0.041851] pid_max: default: 32768 minimum: 301 [ 0.061017] Mount-cache hash table entries: 256 [ 0.121847] mce: CPU supports 10 MCE banks [ 0.127608] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.127608] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.127608] tlb_flushall_shift is 0xffffffff [ 0.128329] CPU: AMD QEMU Virtual CPU version 1.1.0 stepping 03 [ 0.171506] ACPI: Core revision 20120711 [ 0.430358] ACPI: setting ELCR to 0200 (from 0c00) [ 0.467171] Performance Events: [ 0.468714] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.470544] no hardware sampling interrupt available. [ 0.472530] Broken PMU hardware detected, using software events only. [ 0.474097] Failed to access perfctr msr (MSR c0010004 is 0) [ 0.513632] Apic disabled [ 0.580957] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.585301] RTC time: 11:49:17, date: 08/09/12 [ 0.597684] NET: Registered protocol family 16 [ 0.660784] ACPI: bus type pci registered [ 0.673619] PCI: Using configuration type 1 for base access [ 1.298296] bio: create slab at 0 [ 1.324443] ACPI: Added _OSI(Module Device) [ 1.325759] ACPI: Added _OSI(Processor Device) [ 1.326917] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.328380] ACPI: Added _OSI(Processor Aggregator Device) [ 1.473864] ACPI: EC: Look up EC in DSDT [ 1.883813] ACPI: Interpreter enabled [ 1.884507] ACPI: (supports S0 S3 S4 S5) [ 1.892544] ACPI: Using PIC for interrupt routing [ 2.401987] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 2.416151] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.423052] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 2.424608] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 2.428592] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 2.430688] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 2.432928] PCI: root bus 00: using default resources [ 2.436870] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 2.447252] PCI host bridge to bus 0000:00 [ 2.449326] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 2.452627] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.454429] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.456468] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff] [ 2.458575] pci_bus 0000:00: scanning bus [ 2.464574] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 2.468154] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x11 [ 2.479268] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 2.486197] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 2.496905] pci 0000:00:01.1: reg 20: [io 0xc1c0-0xc1cf] [ 2.504824] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 2.506675] pci 0000:00:01.3: calling acpi_pm_check_blacklist+0x0/0x54 [ 2.513684] pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x1c6 [ 2.516969] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 2.519155] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 2.521116] pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0x17 [ 2.525492] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 2.528939] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 2.533787] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] [ 2.548863] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] [ 2.553648] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 2.557902] pci 0000:00:03.0: reg 10: [mem 0xfeba0000-0xfebbffff] [ 2.561788] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] [ 2.577779] pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 2.583294] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 2.586087] pci 0000:00:04.0: reg 10: [io 0xc040-0xc07f] [ 2.592736] pci 0000:00:04.0: reg 14: [mem 0xfebf1000-0xfebf1fff] [ 2.610840] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 2.614091] pci 0000:00:05.0: reg 10: [io 0xc080-0xc0bf] [ 2.620685] pci 0000:00:05.0: reg 14: [mem 0xfebf2000-0xfebf2fff] [ 2.638678] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 2.641998] pci 0000:00:06.0: reg 10: [io 0xc0c0-0xc0ff] [ 2.646921] pci 0000:00:06.0: reg 14: [mem 0xfebf3000-0xfebf3fff] [ 2.666628] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 2.670095] pci 0000:00:07.0: reg 10: [io 0xc100-0xc13f] [ 2.674737] pci 0000:00:07.0: reg 14: [mem 0xfebf4000-0xfebf4fff] [ 2.695058] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 2.698173] pci 0000:00:08.0: reg 10: [io 0xc140-0xc17f] [ 2.704689] pci 0000:00:08.0: reg 14: [mem 0xfebf5000-0xfebf5fff] [ 2.725833] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 2.728171] pci 0000:00:09.0: reg 10: [io 0xc180-0xc1bf] [ 2.728171] pci 0000:00:09.0: reg 14: [mem 0xfebf6000-0xfebf6fff] [ 2.740537] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 2.742530] pci 0000:00:0a.0: reg 10: [mem 0xfebf7000-0xfebf700f] [ 2.754061] pci_bus 0000:00: fixups for bus [ 2.755512] pci_bus 0000:00: bus scan returning with max=00 [ 2.756540] pci_bus 0000:00: on NUMA node 0 [ 2.758016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.817540] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 2.819241] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 3.624511] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 3.633118] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 3.640515] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 3.647447] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 3.654540] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 [ 3.667258] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 3.669214] vgaarb: loaded [ 3.669963] vgaarb: bridge control possible 0000:00:02.0 [ 3.697216] SCSI subsystem initialized [ 3.698468] ACPI: bus type scsi registered [ 3.702696] libata version 3.00 loaded. [ 3.707608] ACPI: bus type usb registered [ 3.710697] usbcore: registered new interface driver usbfs [ 3.714234] usbcore: registered new interface driver hub [ 3.718705] usbcore: registered new device driver usb [ 3.728091] Linux video capture interface: v2.00 [ 3.737646] PCI: Using ACPI for IRQ routing [ 3.739072] PCI: pci_cache_line_size set to 64 bytes [ 3.741766] pci 0000:00:01.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) [ 3.743444] pci 0000:00:01.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) [ 3.744505] pci 0000:00:01.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) [ 3.746075] pci 0000:00:01.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) [ 3.748477] pci 0000:00:01.1: BAR 4: reserving [io 0xc1c0-0xc1cf flags 0x40101] (d=0, p=0) [ 3.750395] pci 0000:00:02.0: BAR 0: reserving [mem 0xfc000000-0xfdffffff flags 0x42208] (d=0, p=0) [ 3.752626] pci 0000:00:02.0: BAR 1: reserving [mem 0xfebf0000-0xfebf0fff flags 0x40200] (d=0, p=0) [ 3.754503] pci 0000:00:03.0: BAR 0: reserving [mem 0xfeba0000-0xfebbffff flags 0x40200] (d=0, p=0) [ 3.756484] pci 0000:00:03.0: BAR 1: reserving [io 0xc000-0xc03f flags 0x40101] (d=0, p=0) [ 3.758267] pci 0000:00:04.0: BAR 0: reserving [io 0xc040-0xc07f flags 0x40101] (d=0, p=0) [ 3.760484] pci 0000:00:04.0: BAR 1: reserving [mem 0xfebf1000-0xfebf1fff flags 0x40200] (d=0, p=0) [ 3.762339] pci 0000:00:05.0: BAR 0: reserving [io 0xc080-0xc0bf flags 0x40101] (d=0, p=0) [ 3.764485] pci 0000:00:05.0: BAR 1: reserving [mem 0xfebf2000-0xfebf2fff flags 0x40200] (d=0, p=0) [ 3.766337] pci 0000:00:06.0: BAR 0: reserving [io 0xc0c0-0xc0ff flags 0x40101] (d=0, p=0) [ 3.768509] pci 0000:00:06.0: BAR 1: reserving [mem 0xfebf3000-0xfebf3fff flags 0x40200] (d=0, p=0) [ 3.770370] pci 0000:00:07.0: BAR 0: reserving [io 0xc100-0xc13f flags 0x40101] (d=0, p=0) [ 3.772461] pci 0000:00:07.0: BAR 1: reserving [mem 0xfebf4000-0xfebf4fff flags 0x40200] (d=0, p=0) [ 3.774319] pci 0000:00:08.0: BAR 0: reserving [io 0xc140-0xc17f flags 0x40101] (d=0, p=0) [ 3.775929] pci 0000:00:08.0: BAR 1: reserving [mem 0xfebf5000-0xfebf5fff flags 0x40200] (d=0, p=0) [ 3.776632] pci 0000:00:09.0: BAR 0: reserving [io 0xc180-0xc1bf flags 0x40101] (d=0, p=0) [ 3.778248] pci 0000:00:09.0: BAR 1: reserving [mem 0xfebf6000-0xfebf6fff flags 0x40200] (d=0, p=0) [ 3.780636] pci 0000:00:0a.0: BAR 0: reserving [mem 0xfebf7000-0xfebf700f flags 0x40200] (d=0, p=0) [ 3.786543] e820: reserve RAM buffer [mem 0x00093c00-0x0009ffff] [ 3.788593] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 3.818608] Bluetooth: Core ver 2.16 [ 3.820794] NET: Registered protocol family 31 [ 3.821773] Bluetooth: HCI device and connection manager initialized [ 3.823452] Bluetooth: HCI socket layer initialized [ 3.824648] Bluetooth: L2CAP socket layer initialized [ 3.827037] Bluetooth: SCO socket layer initialized [ 3.828650] NET: Registered protocol family 8 [ 3.829627] NET: Registered protocol family 20 [ 3.843312] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 3.864916] Switching to clocksource hpet [ 3.870992] FS-Cache: Loaded [ 3.873793] CacheFiles: Loaded [ 3.879481] pnp: PnP ACPI init [ 3.881151] ACPI: bus type pnp registered [ 3.886039] pnp 00:00: [bus 00-ff] [ 3.887573] pnp 00:00: [io 0x0cf8-0x0cff] [ 3.888660] pnp 00:00: [io 0x0000-0x0cf7 window] [ 3.889676] pnp 00:00: [io 0x0d00-0xffff window] [ 3.891285] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 3.892459] pnp 00:00: [mem 0xe0000000-0xfebfffff window] [ 3.901136] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 3.905082] pnp 00:01: [io 0x0070-0x0071] [ 3.907184] pnp 00:01: [irq 8] [ 3.908117] pnp 00:01: [io 0x0072-0x0077] [ 3.911399] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 3.916197] pnp 00:02: [io 0x0060] [ 3.917095] pnp 00:02: [io 0x0064] [ 3.917895] pnp 00:02: [irq 1] [ 3.921109] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 3.925244] pnp 00:03: [irq 12] [ 3.928591] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 3.933266] pnp 00:04: [io 0x03f2-0x03f5] [ 3.934704] pnp 00:04: [io 0x03f7] [ 3.935520] pnp 00:04: [irq 6] [ 3.936641] pnp 00:04: [dma 2] [ 3.939914] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 3.945353] pnp 00:05: [io 0x0378-0x037f] [ 3.946699] pnp 00:05: [irq 7] [ 3.949460] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 3.955181] pnp 00:06: [io 0x03f8-0x03ff] [ 3.956140] pnp 00:06: [irq 4] [ 3.959604] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 3.979583] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 3.985094] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 3.998647] pnp: PnP ACPI: found 8 devices [ 3.999688] ACPI: ACPI bus type pnp unregistered [ 4.131771] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 4.133059] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff] [ 4.136426] NET: Registered protocol family 1 [ 4.139196] pci 0000:00:00.0: calling quirk_natoma+0x0/0x40 [ 4.140411] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 4.141615] pci 0000:00:00.0: calling quirk_passive_release+0x0/0xb0 [ 4.143695] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 4.145685] pci 0000:00:01.0: calling quirk_isa_dma_hangs+0x0/0x43 [ 4.147391] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 4.149119] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x104 [ 4.150869] pci 0000:00:02.0: Boot video device [ 4.152139] pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x1cd [ 4.155194] PCI: CLS 0 bytes, default 64 [ 4.185609] Unpacking initramfs... [ 32.011678] debug: unmapping init [mem 0xffff88000e8d6000-0xffff88000ffeffff] [ 32.369191] DMA-API: preallocated 32768 debug entries [ 32.370877] DMA-API: debugging enabled by kernel config [ 32.388404] kvm: Nested Virtualization enabled [ 32.411520] Machine check injector initialized [ 32.426430] cryptomgr_test (16) used greatest stack depth: 7056 bytes left [ 32.432277] cryptomgr_test (17) used greatest stack depth: 6944 bytes left [ 32.438449] cryptomgr_test (18) used greatest stack depth: 6864 bytes left [ 32.463312] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 32.507465] Initializing RT-Tester: OK [ 32.511309] rcu-torture:--- Start of test: nreaders=2 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/1 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 32.560660] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 32.776745] VFS: Disk quotas dquot_6.5.2 [ 32.784581] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 32.821451] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 32.850772] ROMFS MTD (C) 2007 Red Hat, Inc. [ 32.857639] QNX6 filesystem 1.0.0 registered. [ 32.859219] fuse init (API version 7.19) [ 32.872285] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 32.918632] OCFS2 1.5.0 [ 32.927985] ocfs2: Registered cluster interface o2cb [ 32.929170] OCFS2 DLMFS 1.5.0 [ 32.935431] OCFS2 User DLM kernel interface loaded [ 32.936541] OCFS2 Node Manager 1.5.0 [ 32.956860] OCFS2 DLM 1.5.0 [ 33.068494] NET: Registered protocol family 38 [ 33.076444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 33.079543] io scheduler noop registered (default) [ 33.080649] start plist test [ 33.157796] end plist test [ 33.184099] xz_dec_test: module loaded [ 33.185101] xz_dec_test: Create a device node with 'mknod xz_dec_test c 250 0' and write .xz files to it. [ 33.215392] cr_bllcd: INTEL CARILLO RANCH LPC not found. [ 33.217805] cr_bllcd: Carillo Ranch Backlight Driver Initialized. [ 33.221287] i2c-core: driver [adp8860_bl] using legacy suspend method [ 33.223180] i2c-core: driver [adp8860_bl] using legacy resume method [ 33.237457] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 33.248492] vmlfb: initializing [ 33.256714] hgafb: HGA card not detected. [ 33.258697] hgafb: probe of hgafb.0 failed with error -22 [ 33.292884] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000 [ 33.304559] fbcon: CL Picasso4 (fb0) is primary device [ 33.403309] tsc: Refined TSC clocksource calibration: 3192.000 MHz [ 33.403739] Switching to clocksource tsc [ 33.646018] Console: switching to colour frame buffer device 80x30 [ 34.183425] usbcore: registered new interface driver udlfb [ 34.350892] usbcore: registered new interface driver smscufx [ 34.535193] kworker/u:0 (82) used greatest stack depth: 5448 bytes left [ 34.700861] uvesafb: failed to execute /sbin/v86d [ 34.855257] uvesafb: make sure that the v86d helper is installed and executable [ 35.171601] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 35.342828] uvesafb: vbe_init() failed with -22 [ 35.513680] uvesafb: probe of uvesafb.0 failed with error -22 [ 35.721273] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 36.373940] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 36.537520] enter max3107 init [ 36.712628] Non-volatile memory driver v1.3 [ 36.876524] smapi::smapi_init, ERROR invalid usSmapiID [ 37.039793] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 37.369262] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 37.703268] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 37.871716] Linux agpgart interface v0.103 [ 38.039091] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 38.381824] Hangcheck: Using getrawmonotonic(). [ 38.553880] [drm] Initialized drm 1.1.0 20060810 [ 38.734893] [drm] radeon defaulting to userspace modesetting. [ 39.076140] i2c-core: driver [ch7006] using legacy suspend method [ 39.243953] i2c-core: driver [ch7006] using legacy resume method [ 39.412933] Phantom Linux Driver, version n0.9.8, init OK [ 39.587367] i2c-core: driver [fsa9480] using legacy suspend method [ 39.742467] i2c-core: driver [fsa9480] using legacy resume method [ 39.893808] Driver for timberdale has been successfully registered. [ 40.050776] Uniform Multi-Platform E-IDE driver [ 40.219567] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [ 40.378769] piix 0000:00:01.1: not 100% native mode: will probe irqs later [ 40.532530] PIIX_IDE 0000:00:01.1: enabling bus mastering [ 40.686715] PIIX_IDE 0000:00:01.1: setting latency timer to 64 [ 40.835001] ide0: BM-DMA at 0xc1c0-0xc1c7 [ 40.985436] ide1: BM-DMA at 0xc1c8-0xc1cf [ 41.133547] Probing IDE interface ide0... [ 41.851934] Probing IDE interface ide1... [ 42.739974] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 43.565779] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 43.701841] hdc: MWDMA2 mode selected [ 43.835584] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 43.970812] ide1 at 0x170-0x177,0x376 on irq 15 [ 44.123364] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 44.381449] ide-gd driver 1.18 [ 44.514030] Loading iSCSI transport class v2.0-870. [ 44.650434] rdac: device handler registered [ 44.777761] emc: device handler registered [ 44.917441] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 45.051126] scsi: Detection failed (no card) [ 45.178384] Brocade BFA FC/FCOE SCSI driver - version: 3.0.23.0 [ 45.332429] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 45.462757] PCI: setting IRQ 11 as level-triggered [ 45.606767] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 45.751108] PCI: setting IRQ 10 as level-triggered [ 45.908618] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 46.066053] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 46.408819] DC390: clustering now enabled by default. If you get problems load [ 46.693038] with "disable_clustering=1" and report to maintainers [ 46.836192] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 47.052484] ipr: IBM Power RAID SCSI Device Driver version: 2.5.3 (March 10, 2012) [ 47.286705] RocketRAID 3xxx/4xxx Controller driver v1.6 (091225) [ 47.409431] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 47.534519] iscsi: registered transport (be2iscsi) [ 47.656244] VMware PVSCSI driver - version 1.0.2.0-k [ 47.773792] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 47.965225] osst :I: Tape driver with OnStream support version 0.99.4 [ 47.965225] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 48.229422] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) [ 48.487693] spi_ks8995: Micrel KS8995 Ethernet switch SPI driver version 0.1.1 [ 48.735905] tun: Universal TUN/TAP device driver, 1.6 [ 48.864447] tun: (C) 1999-2004 Max Krasnyansky [ 48.997016] arcnet loaded. [ 49.178948] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 49.327202] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 49.574499] arcnet: raw mode (`r') encapsulation support loaded. [ 49.705765] arcnet: cap mode (`c') encapsulation support loaded. [ 49.824010] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 49.938535] Copyright (c) 2007 Atheros Corporation. [ 50.055092] Brocade 10G Ethernet driver - version: 3.0.23.0 [ 50.174879] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 50.294770] e100: Copyright(c) 1999-2006 Intel Corporation [ 50.471081] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 50.580017] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 50.683623] e1000 0000:00:03.0: enabling bus mastering [ 50.783868] e1000 0000:00:03.0: setting latency timer to 64 [ 51.249891] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 51.401317] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection [ 51.554612] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 51.702795] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 51.854866] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.0.1-k [ 52.002567] igb: Copyright (c) 2007-2012 Intel Corporation. [ 52.148508] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.6.0-k [ 52.423169] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 52.569248] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 52.715137] sky2: driver version 1.30 [ 52.861338] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 53.010838] QLogic/NetXen Network Driver v4.0.80 [ 53.160617] PPP generic driver version 2.4.2 [ 53.303686] PPP BSD Compression module registered [ 53.434940] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). [ 53.565520] SLIP linefill/keepalive option. [ 53.699859] usbcore: registered new interface driver kaweth [ 53.836887] usbcore: registered new interface driver asix [ 53.972314] usbcore: registered new interface driver cdc_ether [ 54.113012] usbcore: registered new interface driver dm9601 [ 54.254718] usbcore: registered new interface driver smsc95xx [ 54.344759] usbcore: registered new interface driver cdc_subset [ 54.431266] usbcore: registered new interface driver zaurus [ 54.516307] usbcore: registered new interface driver int51x1 [ 54.628691] usbcore: registered new interface driver cdc_phonet [ 54.754884] usbcore: registered new interface driver kalmia [ 54.874692] usbcore: registered new interface driver cx82310_eth [ 54.995086] Madge ATM Horizon [Ultra] driver version 1.2.1 [ 55.116162] idt77252_init: at ffffffff82a97092 [ 55.231930] Fusion MPT base driver 3.04.20 [ 55.344648] Copyright (c) 1999-2008 LSI Corporation [ 55.448074] Fusion MPT SPI Host driver 3.04.20 [ 55.549093] Fusion MPT FC Host driver 3.04.20 [ 55.651028] Fusion MPT SAS Host driver 3.04.20 [ 55.762799] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 55.861101] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 55.963901] driver u132_hcd [ 56.075212] usbcore: registered new interface driver cdc_acm [ 56.183745] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 56.408232] usbcore: registered new interface driver usblp [ 56.527644] usbcore: registered new interface driver cdc_wdm [ 56.644204] Initializing USB Mass Storage driver... [ 56.764960] usbcore: registered new interface driver usb-storage [ 56.887102] USB Mass Storage support registered. [ 57.011899] usbcore: registered new interface driver ums-cypress [ 57.140934] usbcore: registered new interface driver ums-datafab [ 57.271027] usbcore: registered new interface driver ums-karma [ 57.401551] usbcore: registered new interface driver ums-onetouch [ 57.533248] usbcore: registered new interface driver ums-realtek [ 57.664818] usbcore: registered new interface driver ums-sddr09 [ 57.795781] usbcore: registered new interface driver ums-usbat [ 57.925242] usbcore: registered new interface driver mdc800 [ 58.051478] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 58.313589] usbcore: registered new interface driver microtekX6 [ 58.455681] usbcore: registered new interface driver adutux [ 58.596384] usbcore: registered new interface driver cypress_cy7c63 [ 58.735793] driver ftdi-elan [ 58.884221] usbcore: registered new interface driver ftdi-elan [ 59.028425] usbcore: registered new interface driver ldusb [ 59.169051] usbcore: registered new interface driver usbled [ 59.303585] usbcore: registered new interface driver ueagle-atm [ 59.428492] xusbatm: malformed module parameters [ 59.557091] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 59.810671] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 59.948398] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 60.097558] mousedev: PS/2 mouse device common for all mice [ 60.253373] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 60.524141] usbcore: registered new interface driver bcm5974 [ 60.666665] usbcore: registered new interface driver synaptics_usb [ 60.809172] usbcore: registered new interface driver iforce [ 60.952403] usbcore: registered new interface driver xpad [ 61.085725] usbcore: registered new interface driver aiptek [ 61.220741] usbcore: registered new interface driver kbtab [ 61.358979] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 61.504654] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 61.650700] rtc_cmos 00:01: RTC can wake from S4 [ 61.795205] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 61.927953] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 62.058996] hpet1: lost 7 rtc interrupts [ 62.229468] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 62.369833] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 62.537124] usbcore: registered new interface driver i2c-diolan-u2c [ 62.731784] i2c-parport-light: adapter type unspecified [ 62.887071] lirc_dev: IR Remote Control driver registered, major 243 [ 63.032978] IR NEC protocol handler initialized [ 63.174705] IR RC5(x) protocol handler initialized [ 63.308845] IR RC6 protocol handler initialized [ 63.433161] IR JVC protocol handler initialized [ 63.556064] IR Sony protocol handler initialized [ 63.675924] IR SANYO protocol handler initialized [ 63.791555] IR LIRC bridge handler initialized [ 63.903785] Driver for 1-wire Dallas network protocol. [ 64.018571] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 64.139585] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 64.418400] applesmc: supported laptop not found! [ 64.506868] applesmc: driver init failed (ret=-19)! [ 64.607647] pc87360: PC8736x not detected, module not inserted [ 64.695997] sch56xx_common: Unsupported device id: 0xff [ 64.785406] sch56xx_common: Unsupported device id: 0xff [ 64.880109] usbcore: registered new interface driver pcwd_usb [ 64.967139] acquirewdt: WDT driver for Acquire single board computer initialising [ 65.142513] acquirewdt: I/O address 0x0043 already in use [ 65.230599] acquirewdt: probe of acquirewdt failed with error -5 [ 65.323989] ib700wdt: WDT driver for IB700 single board computer initialising [ 65.469203] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05 [ 65.624758] i6300esb: cannot register miscdev on minor=130 (err=-16) [ 65.762950] i6300ESB timer: probe of 0000:00:0a.0 failed with error -16 [ 65.895314] sbc60xxwdt: I/O address 0x0443 already in use [ 66.031594] sbc8360: failed to register misc device [ 66.140735] cpu5wdt: misc_register failed [ 66.234037] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 66.433873] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 66.566862] w83697hf_wdt: WDT driver for W83697HF/HG initializing [ 66.739402] w83697hf_wdt: watchdog not found at address 0x2e [ 66.844674] w83697hf_wdt: No W83697HF/HG could be found [ 66.947052] w83977f_wdt: driver v1.00 [ 67.046546] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 67.147525] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 67.251138] Bluetooth: HCI UART driver ver 2.2 [ 67.355697] Bluetooth: HCI H4 protocol initialized [ 67.459961] Bluetooth: HCI BCSP protocol initialized [ 67.570038] usbcore: registered new interface driver bcm203x [ 67.688493] usbcore: registered new interface driver bfusb [ 67.836059] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0 [ 67.991318] cpuidle: using governor ladder [ 68.106645] sdhci: Secure Digital Host Controller Interface driver [ 68.213746] sdhci: Copyright(c) Pierre Ossman [ 68.327985] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 68.338366] usbcore: registered new interface driver vub300 [ 68.547878] sdhci-pltfm: SDHCI platform and OF driver helper [ 68.663493] leds_ss4200: no LED devices found [ 68.776732] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 69.010477] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 69.346889] usbcore: registered new interface driver usbhid [ 69.453145] usbhid: USB HID core driver [ 69.560624] usbcore: registered new interface driver lirc_sasem [ 69.676451] platform lirc_dev.0: lirc_dev: driver lirc_sir registered at minor = 0 Kernel freezed on [ 69.676451] platform lirc_dev.0: lirc_dev: driver lirc_sir registered at minor = 0