| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1344564495-20346-1-git-send-email-myungjoo.ham@samsung.com>
Date: Fri, 10 Aug 2012 11:08:15 +0900
From: MyungJoo Ham <myungjoo.ham@...sung.com>
To: linux-kernel@...r.kernel.org
Cc: gregkh@...uxfoundation.org, cw00.choi@...sung.com,
kyungmin.park@...sung.com, lars@...afoo.de,
anish kumar <anish198519851985@...il.com>,
Peter Meerwald <pmeerw@...erw.net>
Subject: [PATCH] Extcon: renamed files to comply with the standard naming.
Replaced '_' with '-' in the extcon file names, which has been bogging
me since new drivers have been using the standard naming.
Signed-off-by: MyungJoo Ham <myungjoo.ham@...sung.com>
---
drivers/extcon/Makefile | 4 +-
drivers/extcon/extcon-class.c | 832 +++++++++++++++++++++++++++++++++++++++++
drivers/extcon/extcon-gpio.c | 164 ++++++++
drivers/extcon/extcon_class.c | 832 -----------------------------------------
drivers/extcon/extcon_gpio.c | 164 --------
5 files changed, 998 insertions(+), 998 deletions(-)
create mode 100644 drivers/extcon/extcon-class.c
create mode 100644 drivers/extcon/extcon-gpio.c
delete mode 100644 drivers/extcon/extcon_class.c
delete mode 100644 drivers/extcon/extcon_gpio.c
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index bc7111e..68d6944 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -2,8 +2,8 @@
# Makefile for external connector class (extcon) devices
#
-obj-$(CONFIG_EXTCON) += extcon_class.o
-obj-$(CONFIG_EXTCON_GPIO) += extcon_gpio.o
+obj-$(CONFIG_EXTCON) += extcon-class.o
+obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
new file mode 100644
index 0000000..e0373a1
--- /dev/null
+++ b/drivers/extcon/extcon-class.c
@@ -0,0 +1,832 @@
+/*
+ * drivers/extcon/extcon-class.c
+ *
+ * External connector (extcon) class driver
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Author: Donggeun Kim <dg77.kim@...sung.com>
+ * Author: MyungJoo Ham <myungjoo.ham@...sung.com>
+ *
+ * based on android/drivers/switch/switch_class.c
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@...roid.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/slab.h>
+
+/*
+ * extcon_cable_name suggests the standard cable names for commonly used
+ * cable types.
+ *
+ * However, please do not use extcon_cable_name directly for extcon_dev
+ * struct's supported_cable pointer unless your device really supports
+ * every single port-type of the following cable names. Please choose cable
+ * names that are actually used in your extcon device.
+ */
+const char *extcon_cable_name[] = {
+ [EXTCON_USB] = "USB",
+ [EXTCON_USB_HOST] = "USB-Host",
+ [EXTCON_TA] = "TA",
+ [EXTCON_FAST_CHARGER] = "Fast-charger",
+ [EXTCON_SLOW_CHARGER] = "Slow-charger",
+ [EXTCON_CHARGE_DOWNSTREAM] = "Charge-downstream",
+ [EXTCON_HDMI] = "HDMI",
+ [EXTCON_MHL] = "MHL",
+ [EXTCON_DVI] = "DVI",
+ [EXTCON_VGA] = "VGA",
+ [EXTCON_DOCK] = "Dock",
+ [EXTCON_LINE_IN] = "Line-in",
+ [EXTCON_LINE_OUT] = "Line-out",
+ [EXTCON_MIC_IN] = "Microphone",
+ [EXTCON_HEADPHONE_OUT] = "Headphone",
+ [EXTCON_SPDIF_IN] = "SPDIF-in",
+ [EXTCON_SPDIF_OUT] = "SPDIF-out",
+ [EXTCON_VIDEO_IN] = "Video-in",
+ [EXTCON_VIDEO_OUT] = "Video-out",
+ [EXTCON_MECHANICAL] = "Mechanical",
+
+ NULL,
+};
+
+static struct class *extcon_class;
+#if defined(CONFIG_ANDROID)
+static struct class_compat *switch_class;
+#endif /* CONFIG_ANDROID */
+
+static LIST_HEAD(extcon_dev_list);
+static DEFINE_MUTEX(extcon_dev_list_lock);
+
+/**
+ * check_mutually_exclusive - Check if new_state violates mutually_exclusive
+ * condition.
+ * @edev: the extcon device
+ * @new_state: new cable attach status for @edev
+ *
+ * Returns 0 if nothing violates. Returns the index + 1 for the first
+ * violated condition.
+ */
+static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state)
+{
+ int i = 0;
+
+ if (!edev->mutually_exclusive)
+ return 0;
+
+ for (i = 0; edev->mutually_exclusive[i]; i++) {
+ int count = 0, j;
+ u32 correspondants = new_state & edev->mutually_exclusive[i];
+ u32 exp = 1;
+
+ for (j = 0; j < 32; j++) {
+ if (exp & correspondants)
+ count++;
+ if (count > 1)
+ return i + 1;
+ exp <<= 1;
+ }
+ }
+
+ return 0;
+}
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int i, count = 0;
+ struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+ if (edev->print_state) {
+ int ret = edev->print_state(edev, buf);
+
+ if (ret >= 0)
+ return ret;
+ /* Use default if failed */
+ }
+
+ if (edev->max_supported == 0)
+ return sprintf(buf, "%u\n", edev->state);
+
+ for (i = 0; i < SUPPORTED_CABLE_MAX; i++) {
+ if (!edev->supported_cable[i])
+ break;
+ count += sprintf(buf + count, "%s=%d\n",
+ edev->supported_cable[i],
+ !!(edev->state & (1 << i)));
+ }
+
+ return count;
+}
+
+int extcon_set_state(struct extcon_dev *edev, u32 state);
+static ssize_t state_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 state;
+ ssize_t ret = 0;
+ struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+ ret = sscanf(buf, "0x%x", &state);
+ if (ret == 0)
+ ret = -EINVAL;
+ else
+ ret = extcon_set_state(edev, state);
+
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t name_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+ /* Optional callback given by the user */
+ if (edev->print_name) {
+ int ret = edev->print_name(edev, buf);
+ if (ret >= 0)
+ return ret;
+ }
+
+ return sprintf(buf, "%s\n", dev_name(edev->dev));
+}
+
+static ssize_t cable_name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+ attr_name);
+
+ return sprintf(buf, "%s\n",
+ cable->edev->supported_cable[cable->cable_index]);
+}
+
+static ssize_t cable_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+ attr_state);
+
+ return sprintf(buf, "%d\n",
+ extcon_get_cable_state_(cable->edev,
+ cable->cable_index));
+}
+
+static ssize_t cable_state_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+ attr_state);
+ int ret, state;
+
+ ret = sscanf(buf, "%d", &state);
+ if (ret == 0)
+ ret = -EINVAL;
+ else
+ ret = extcon_set_cable_state_(cable->edev, cable->cable_index,
+ state);
+
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+/**
+ * extcon_update_state() - Update the cable attach states of the extcon device
+ * only for the masked bits.
+ * @edev: the extcon device
+ * @mask: the bit mask to designate updated bits.
+ * @state: new cable attach status for @edev
+ *
+ * Changing the state sends uevent with environment variable containing
+ * the name of extcon device (envp[0]) and the state output (envp[1]).
+ * Tizen uses this format for extcon device to get events from ports.
+ * Android uses this format as well.
+ *
+ * Note that the notifier provides which bits are changed in the state
+ * variable with the val parameter (second) to the callback.
+ */
+int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
+{
+ char name_buf[120];
+ char state_buf[120];
+ char *prop_buf;
+ char *envp[3];
+ int env_offset = 0;
+ int length;
+ unsigned long flags;
+
+ spin_lock_irqsave(&edev->lock, flags);
+
+ if (edev->state != ((edev->state & ~mask) | (state & mask))) {
+ u32 old_state = edev->state;
+
+ if (check_mutually_exclusive(edev, (edev->state & ~mask) |
+ (state & mask))) {
+ spin_unlock_irqrestore(&edev->lock, flags);
+ return -EPERM;
+ }
+
+ edev->state &= ~mask;
+ edev->state |= state & mask;
+
+ raw_notifier_call_chain(&edev->nh, old_state, edev);
+
+ /* This could be in interrupt handler */
+ prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
+ if (prop_buf) {
+ length = name_show(edev->dev, NULL, prop_buf);
+ if (length > 0) {
+ if (prop_buf[length - 1] == '\n')
+ prop_buf[length - 1] = 0;
+ snprintf(name_buf, sizeof(name_buf),
+ "NAME=%s", prop_buf);
+ envp[env_offset++] = name_buf;
+ }
+ length = state_show(edev->dev, NULL, prop_buf);
+ if (length > 0) {
+ if (prop_buf[length - 1] == '\n')
+ prop_buf[length - 1] = 0;
+ snprintf(state_buf, sizeof(state_buf),
+ "STATE=%s", prop_buf);
+ envp[env_offset++] = state_buf;
+ }
+ envp[env_offset] = NULL;
+ /* Unlock early before uevent */
+ spin_unlock_irqrestore(&edev->lock, flags);
+
+ kobject_uevent_env(&edev->dev->kobj, KOBJ_CHANGE, envp);
+ free_page((unsigned long)prop_buf);
+ } else {
+ /* Unlock early before uevent */
+ spin_unlock_irqrestore(&edev->lock, flags);
+
+ dev_err(edev->dev, "out of memory in extcon_set_state\n");
+ kobject_uevent(&edev->dev->kobj, KOBJ_CHANGE);
+ }
+ } else {
+ /* No changes */
+ spin_unlock_irqrestore(&edev->lock, flags);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(extcon_update_state);
+
+/**
+ * extcon_set_state() - Set the cable attach states of the extcon device.
+ * @edev: the extcon device
+ * @state: new cable attach status for @edev
+ *
+ * Note that notifier provides which bits are changed in the state
+ * variable with the val parameter (second) to the callback.
+ */
+int extcon_set_state(struct extcon_dev *edev, u32 state)
+{
+ return extcon_update_state(edev, 0xffffffff, state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_state);
+
+/**
+ * extcon_find_cable_index() - Get the cable index based on the cable name.
+ * @edev: the extcon device that has the cable.
+ * @cable_name: cable name to be searched.
+ *
+ * Note that accessing a cable state based on cable_index is faster than
+ * cable_name because using cable_name induces a loop with strncmp().
+ * Thus, when get/set_cable_state is repeatedly used, using cable_index
+ * is recommended.
+ */
+int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name)
+{
+ int i;
+
+ if (edev->supported_cable) {
+ for (i = 0; edev->supported_cable[i]; i++) {
+ if (!strncmp(edev->supported_cable[i],
+ cable_name, CABLE_NAME_MAX))
+ return i;
+ }
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(extcon_find_cable_index);
+
+/**
+ * extcon_get_cable_state_() - Get the status of a specific cable.
+ * @edev: the extcon device that has the cable.
+ * @index: cable index that can be retrieved by extcon_find_cable_index().
+ */
+int extcon_get_cable_state_(struct extcon_dev *edev, int index)
+{
+ if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+ return -EINVAL;
+
+ return !!(edev->state & (1 << index));
+}
+EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
+
+/**
+ * extcon_get_cable_state() - Get the status of a specific cable.
+ * @edev: the extcon device that has the cable.
+ * @cable_name: cable name.
+ *
+ * Note that this is slower than extcon_get_cable_state_.
+ */
+int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name)
+{
+ return extcon_get_cable_state_(edev, extcon_find_cable_index
+ (edev, cable_name));
+}
+EXPORT_SYMBOL_GPL(extcon_get_cable_state);
+
+/**
+ * extcon_get_cable_state_() - Set the status of a specific cable.
+ * @edev: the extcon device that has the cable.
+ * @index: cable index that can be retrieved by extcon_find_cable_index().
+ * @cable_state: the new cable status. The default semantics is
+ * true: attached / false: detached.
+ */
+int extcon_set_cable_state_(struct extcon_dev *edev,
+ int index, bool cable_state)
+{
+ u32 state;
+
+ if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+ return -EINVAL;
+
+ state = cable_state ? (1 << index) : 0;
+ return extcon_update_state(edev, 1 << index, state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
+
+/**
+ * extcon_get_cable_state() - Set the status of a specific cable.
+ * @edev: the extcon device that has the cable.
+ * @cable_name: cable name.
+ * @cable_state: the new cable status. The default semantics is
+ * true: attached / false: detached.
+ *
+ * Note that this is slower than extcon_set_cable_state_.
+ */
+int extcon_set_cable_state(struct extcon_dev *edev,
+ const char *cable_name, bool cable_state)
+{
+ return extcon_set_cable_state_(edev, extcon_find_cable_index
+ (edev, cable_name), cable_state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_cable_state);
+
+/**
+ * extcon_get_extcon_dev() - Get the extcon device instance from the name
+ * @extcon_name: The extcon name provided with extcon_dev_register()
+ */
+struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
+{
+ struct extcon_dev *sd;
+
+ mutex_lock(&extcon_dev_list_lock);
+ list_for_each_entry(sd, &extcon_dev_list, entry) {
+ if (!strcmp(sd->name, extcon_name))
+ goto out;
+ }
+ sd = NULL;
+out:
+ mutex_unlock(&extcon_dev_list_lock);
+ return sd;
+}
+EXPORT_SYMBOL_GPL(extcon_get_extcon_dev);
+
+static int _call_per_cable(struct notifier_block *nb, unsigned long val,
+ void *ptr)
+{
+ struct extcon_specific_cable_nb *obj = container_of(nb,
+ struct extcon_specific_cable_nb, internal_nb);
+ struct extcon_dev *edev = ptr;
+
+ if ((val & (1 << obj->cable_index)) !=
+ (edev->state & (1 << obj->cable_index))) {
+ bool cable_state = true;
+
+ obj->previous_value = val;
+
+ if (val & (1 << obj->cable_index))
+ cable_state = false;
+
+ return obj->user_nb->notifier_call(obj->user_nb,
+ cable_state, ptr);
+ }
+
+ return NOTIFY_OK;
+}
+
+/**
+ * extcon_register_interest() - Register a notifier for a state change of a
+ * specific cable, not an entire set of cables of a
+ * extcon device.
+ * @obj: an empty extcon_specific_cable_nb object to be returned.
+ * @extcon_name: the name of extcon device.
+ * @cable_name: the target cable name.
+ * @nb: the notifier block to get notified.
+ *
+ * Provide an empty extcon_specific_cable_nb. extcon_register_interest() sets
+ * the struct for you.
+ *
+ * extcon_register_interest is a helper function for those who want to get
+ * notification for a single specific cable's status change. If a user wants
+ * to get notification for any changes of all cables of a extcon device,
+ * he/she should use the general extcon_register_notifier().
+ *
+ * Note that the second parameter given to the callback of nb (val) is
+ * "old_state", not the current state. The current state can be retrieved
+ * by looking at the third pameter (edev pointer)'s state value.
+ */
+int extcon_register_interest(struct extcon_specific_cable_nb *obj,
+ const char *extcon_name, const char *cable_name,
+ struct notifier_block *nb)
+{
+ if (!obj || !extcon_name || !cable_name || !nb)
+ return -EINVAL;
+
+ obj->edev = extcon_get_extcon_dev(extcon_name);
+ if (!obj->edev)
+ return -ENODEV;
+
+ obj->cable_index = extcon_find_cable_index(obj->edev, cable_name);
+ if (obj->cable_index < 0)
+ return -ENODEV;
+
+ obj->user_nb = nb;
+
+ obj->internal_nb.notifier_call = _call_per_cable;
+
+ return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb);
+}
+
+/**
+ * extcon_unregister_interest() - Unregister the notifier registered by
+ * extcon_register_interest().
+ * @obj: the extcon_specific_cable_nb object returned by
+ * extcon_register_interest().
+ */
+int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
+{
+ if (!obj)
+ return -EINVAL;
+
+ return raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
+}
+
+/**
+ * extcon_register_notifier() - Register a notifiee to get notified by
+ * any attach status changes from the extcon.
+ * @edev: the extcon device.
+ * @nb: a notifier block to be registered.
+ *
+ * Note that the second parameter given to the callback of nb (val) is
+ * "old_state", not the current state. The current state can be retrieved
+ * by looking at the third pameter (edev pointer)'s state value.
+ */
+int extcon_register_notifier(struct extcon_dev *edev,
+ struct notifier_block *nb)
+{
+ return raw_notifier_chain_register(&edev->nh, nb);
+}
+EXPORT_SYMBOL_GPL(extcon_register_notifier);
+
+/**
+ * extcon_unregister_notifier() - Unregister a notifiee from the extcon device.
+ * @edev: the extcon device.
+ * @nb: a registered notifier block to be unregistered.
+ */
+int extcon_unregister_notifier(struct extcon_dev *edev,
+ struct notifier_block *nb)
+{
+ return raw_notifier_chain_unregister(&edev->nh, nb);
+}
+EXPORT_SYMBOL_GPL(extcon_unregister_notifier);
+
+static struct device_attribute extcon_attrs[] = {
+ __ATTR(state, S_IRUGO | S_IWUSR, state_show, state_store),
+ __ATTR_RO(name),
+ __ATTR_NULL,
+};
+
+static int create_extcon_class(void)
+{
+ if (!extcon_class) {
+ extcon_class = class_create(THIS_MODULE, "extcon");
+ if (IS_ERR(extcon_class))
+ return PTR_ERR(extcon_class);
+ extcon_class->dev_attrs = extcon_attrs;
+
+#if defined(CONFIG_ANDROID)
+ switch_class = class_compat_register("switch");
+ if (WARN(!switch_class, "cannot allocate"))
+ return -ENOMEM;
+#endif /* CONFIG_ANDROID */
+ }
+
+ return 0;
+}
+
+static void extcon_cleanup(struct extcon_dev *edev, bool skip)
+{
+ mutex_lock(&extcon_dev_list_lock);
+ list_del(&edev->entry);
+ mutex_unlock(&extcon_dev_list_lock);
+
+ if (!skip && get_device(edev->dev)) {
+ int index;
+
+ if (edev->mutually_exclusive && edev->max_supported) {
+ for (index = 0; edev->mutually_exclusive[index];
+ index++)
+ kfree(edev->d_attrs_muex[index].attr.name);
+ kfree(edev->d_attrs_muex);
+ kfree(edev->attrs_muex);
+ }
+
+ for (index = 0; index < edev->max_supported; index++)
+ kfree(edev->cables[index].attr_g.name);
+
+ if (edev->max_supported) {
+ kfree(edev->extcon_dev_type.groups);
+ kfree(edev->cables);
+ }
+
+ device_unregister(edev->dev);
+ put_device(edev->dev);
+ }
+
+ kfree(edev->dev);
+}
+
+static void extcon_dev_release(struct device *dev)
+{
+ struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+ extcon_cleanup(edev, true);
+}
+
+static const char *muex_name = "mutually_exclusive";
+static void dummy_sysfs_dev_release(struct device *dev)
+{
+}
+
+/**
+ * extcon_dev_register() - Register a new extcon device
+ * @edev : the new extcon device (should be allocated before calling)
+ * @dev : the parent device for this extcon device.
+ *
+ * Among the members of edev struct, please set the "user initializing data"
+ * in any case and set the "optional callbacks" if required. However, please
+ * do not set the values of "internal data", which are initialized by
+ * this function.
+ */
+int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
+{
+ int ret, index = 0;
+
+ if (!extcon_class) {
+ ret = create_extcon_class();
+ if (ret < 0)
+ return ret;
+ }
+
+ if (edev->supported_cable) {
+ /* Get size of array */
+ for (index = 0; edev->supported_cable[index]; index++)
+ ;
+ edev->max_supported = index;
+ } else {
+ edev->max_supported = 0;
+ }
+
+ if (index > SUPPORTED_CABLE_MAX) {
+ dev_err(edev->dev, "extcon: maximum number of supported cables exceeded.\n");
+ return -EINVAL;
+ }
+
+ edev->dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+ if (!edev->dev)
+ return -ENOMEM;
+ edev->dev->parent = dev;
+ edev->dev->class = extcon_class;
+ edev->dev->release = extcon_dev_release;
+
+ dev_set_name(edev->dev, edev->name ? edev->name : dev_name(dev));
+
+ if (edev->max_supported) {
+ char buf[10];
+ char *str;
+ struct extcon_cable *cable;
+
+ edev->cables = kzalloc(sizeof(struct extcon_cable) *
+ edev->max_supported, GFP_KERNEL);
+ if (!edev->cables) {
+ ret = -ENOMEM;
+ goto err_sysfs_alloc;
+ }
+ for (index = 0; index < edev->max_supported; index++) {
+ cable = &edev->cables[index];
+
+ snprintf(buf, 10, "cable.%d", index);
+ str = kzalloc(sizeof(char) * (strlen(buf) + 1),
+ GFP_KERNEL);
+ if (!str) {
+ for (index--; index >= 0; index--) {
+ cable = &edev->cables[index];
+ kfree(cable->attr_g.name);
+ }
+ ret = -ENOMEM;
+
+ goto err_alloc_cables;
+ }
+ strcpy(str, buf);
+
+ cable->edev = edev;
+ cable->cable_index = index;
+ cable->attrs[0] = &cable->attr_name.attr;
+ cable->attrs[1] = &cable->attr_state.attr;
+ cable->attrs[2] = NULL;
+ cable->attr_g.name = str;
+ cable->attr_g.attrs = cable->attrs;
+
+ cable->attr_name.attr.name = "name";
+ cable->attr_name.attr.mode = 0444;
+ cable->attr_name.show = cable_name_show;
+
+ cable->attr_state.attr.name = "state";
+ cable->attr_state.attr.mode = 0644;
+ cable->attr_state.show = cable_state_show;
+ cable->attr_state.store = cable_state_store;
+ }
+ }
+
+ if (edev->max_supported && edev->mutually_exclusive) {
+ char buf[80];
+ char *name;
+
+ /* Count the size of mutually_exclusive array */
+ for (index = 0; edev->mutually_exclusive[index]; index++)
+ ;
+
+ edev->attrs_muex = kzalloc(sizeof(struct attribute *) *
+ (index + 1), GFP_KERNEL);
+ if (!edev->attrs_muex) {
+ ret = -ENOMEM;
+ goto err_muex;
+ }
+
+ edev->d_attrs_muex = kzalloc(sizeof(struct device_attribute) *
+ index, GFP_KERNEL);
+ if (!edev->d_attrs_muex) {
+ ret = -ENOMEM;
+ kfree(edev->attrs_muex);
+ goto err_muex;
+ }
+
+ for (index = 0; edev->mutually_exclusive[index]; index++) {
+ sprintf(buf, "0x%x", edev->mutually_exclusive[index]);
+ name = kzalloc(sizeof(char) * (strlen(buf) + 1),
+ GFP_KERNEL);
+ if (!name) {
+ for (index--; index >= 0; index--) {
+ kfree(edev->d_attrs_muex[index].attr.
+ name);
+ }
+ kfree(edev->d_attrs_muex);
+ kfree(edev->attrs_muex);
+ ret = -ENOMEM;
+ goto err_muex;
+ }
+ strcpy(name, buf);
+ edev->d_attrs_muex[index].attr.name = name;
+ edev->d_attrs_muex[index].attr.mode = 0000;
+ edev->attrs_muex[index] = &edev->d_attrs_muex[index]
+ .attr;
+ }
+ edev->attr_g_muex.name = muex_name;
+ edev->attr_g_muex.attrs = edev->attrs_muex;
+
+ }
+
+ if (edev->max_supported) {
+ edev->extcon_dev_type.groups =
+ kzalloc(sizeof(struct attribute_group *) *
+ (edev->max_supported + 2), GFP_KERNEL);
+ if (!edev->extcon_dev_type.groups) {
+ ret = -ENOMEM;
+ goto err_alloc_groups;
+ }
+
+ edev->extcon_dev_type.name = dev_name(edev->dev);
+ edev->extcon_dev_type.release = dummy_sysfs_dev_release;
+
+ for (index = 0; index < edev->max_supported; index++)
+ edev->extcon_dev_type.groups[index] =
+ &edev->cables[index].attr_g;
+ if (edev->mutually_exclusive)
+ edev->extcon_dev_type.groups[index] =
+ &edev->attr_g_muex;
+
+ edev->dev->type = &edev->extcon_dev_type;
+ }
+
+ ret = device_register(edev->dev);
+ if (ret) {
+ put_device(edev->dev);
+ goto err_dev;
+ }
+#if defined(CONFIG_ANDROID)
+ if (switch_class)
+ ret = class_compat_create_link(switch_class, edev->dev,
+ NULL);
+#endif /* CONFIG_ANDROID */
+
+ spin_lock_init(&edev->lock);
+
+ RAW_INIT_NOTIFIER_HEAD(&edev->nh);
+
+ dev_set_drvdata(edev->dev, edev);
+ edev->state = 0;
+
+ mutex_lock(&extcon_dev_list_lock);
+ list_add(&edev->entry, &extcon_dev_list);
+ mutex_unlock(&extcon_dev_list_lock);
+
+ return 0;
+
+err_dev:
+ if (edev->max_supported)
+ kfree(edev->extcon_dev_type.groups);
+err_alloc_groups:
+ if (edev->max_supported && edev->mutually_exclusive) {
+ for (index = 0; edev->mutually_exclusive[index]; index++)
+ kfree(edev->d_attrs_muex[index].attr.name);
+ kfree(edev->d_attrs_muex);
+ kfree(edev->attrs_muex);
+ }
+err_muex:
+ for (index = 0; index < edev->max_supported; index++)
+ kfree(edev->cables[index].attr_g.name);
+err_alloc_cables:
+ if (edev->max_supported)
+ kfree(edev->cables);
+err_sysfs_alloc:
+ kfree(edev->dev);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_dev_register);
+
+/**
+ * extcon_dev_unregister() - Unregister the extcon device.
+ * @edev: the extcon device instance to be unregistered.
+ *
+ * Note that this does not call kfree(edev) because edev was not allocated
+ * by this class.
+ */
+void extcon_dev_unregister(struct extcon_dev *edev)
+{
+ extcon_cleanup(edev, false);
+}
+EXPORT_SYMBOL_GPL(extcon_dev_unregister);
+
+static int __init extcon_class_init(void)
+{
+ return create_extcon_class();
+}
+module_init(extcon_class_init);
+
+static void __exit extcon_class_exit(void)
+{
+ class_destroy(extcon_class);
+}
+module_exit(extcon_class_exit);
+
+MODULE_AUTHOR("Mike Lockwood <lockwood@...roid.com>");
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@...sung.com>");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@...sung.com>");
+MODULE_DESCRIPTION("External connector (extcon) class driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
new file mode 100644
index 0000000..7e28d11
--- /dev/null
+++ b/drivers/extcon/extcon-gpio.c
@@ -0,0 +1,164 @@
+/*
+ * drivers/extcon/extcon-gpio.c
+ *
+ * Single-state GPIO extcon driver based on extcon class
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@...roid.com>
+ *
+ * Modified by MyungJoo Ham <myungjoo.ham@...sung.com> to support extcon
+ * (originally switch class is supported)
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/extcon.h>
+#include <linux/extcon/extcon_gpio.h>
+
+struct gpio_extcon_data {
+ struct extcon_dev edev;
+ unsigned gpio;
+ const char *state_on;
+ const char *state_off;
+ int irq;
+ struct delayed_work work;
+ unsigned long debounce_jiffies;
+};
+
+static void gpio_extcon_work(struct work_struct *work)
+{
+ int state;
+ struct gpio_extcon_data *data =
+ container_of(to_delayed_work(work), struct gpio_extcon_data,
+ work);
+
+ state = gpio_get_value(data->gpio);
+ extcon_set_state(&data->edev, state);
+}
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+ struct gpio_extcon_data *extcon_data = dev_id;
+
+ schedule_delayed_work(&extcon_data->work,
+ extcon_data->debounce_jiffies);
+ return IRQ_HANDLED;
+}
+
+static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf)
+{
+ struct gpio_extcon_data *extcon_data =
+ container_of(edev, struct gpio_extcon_data, edev);
+ const char *state;
+ if (extcon_get_state(edev))
+ state = extcon_data->state_on;
+ else
+ state = extcon_data->state_off;
+
+ if (state)
+ return sprintf(buf, "%s\n", state);
+ return -EINVAL;
+}
+
+static int __devinit gpio_extcon_probe(struct platform_device *pdev)
+{
+ struct gpio_extcon_platform_data *pdata = pdev->dev.platform_data;
+ struct gpio_extcon_data *extcon_data;
+ int ret = 0;
+
+ if (!pdata)
+ return -EBUSY;
+ if (!pdata->irq_flags) {
+ dev_err(&pdev->dev, "IRQ flag is not specified.\n");
+ return -EINVAL;
+ }
+
+ extcon_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
+ GFP_KERNEL);
+ if (!extcon_data)
+ return -ENOMEM;
+
+ extcon_data->edev.name = pdata->name;
+ extcon_data->gpio = pdata->gpio;
+ extcon_data->state_on = pdata->state_on;
+ extcon_data->state_off = pdata->state_off;
+ if (pdata->state_on && pdata->state_off)
+ extcon_data->edev.print_state = extcon_gpio_print_state;
+ extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce);
+
+ ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
+ pdev->name);
+ if (ret < 0)
+ goto err;
+
+ INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
+
+ extcon_data->irq = gpio_to_irq(extcon_data->gpio);
+ if (extcon_data->irq < 0) {
+ ret = extcon_data->irq;
+ goto err;
+ }
+
+ ret = request_any_context_irq(extcon_data->irq, gpio_irq_handler,
+ pdata->irq_flags, pdev->name,
+ extcon_data);
+ if (ret < 0)
+ goto err;
+
+ platform_set_drvdata(pdev, extcon_data);
+ /* Perform initial detection */
+ gpio_extcon_work(&extcon_data->work.work);
+
+ return 0;
+
+err:
+ extcon_dev_unregister(&extcon_data->edev);
+
+ return ret;
+}
+
+static int __devexit gpio_extcon_remove(struct platform_device *pdev)
+{
+ struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&extcon_data->work);
+ free_irq(extcon_data->irq, extcon_data);
+ extcon_dev_unregister(&extcon_data->edev);
+
+ return 0;
+}
+
+static struct platform_driver gpio_extcon_driver = {
+ .probe = gpio_extcon_probe,
+ .remove = __devexit_p(gpio_extcon_remove),
+ .driver = {
+ .name = "extcon-gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(gpio_extcon_driver);
+
+MODULE_AUTHOR("Mike Lockwood <lockwood@...roid.com>");
+MODULE_DESCRIPTION("GPIO extcon driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/extcon/extcon_class.c b/drivers/extcon/extcon_class.c
deleted file mode 100644
index fa56339..0000000
--- a/drivers/extcon/extcon_class.c
+++ /dev/null
@@ -1,832 +0,0 @@
-/*
- * drivers/extcon/extcon_class.c
- *
- * External connector (extcon) class driver
- *
- * Copyright (C) 2012 Samsung Electronics
- * Author: Donggeun Kim <dg77.kim@...sung.com>
- * Author: MyungJoo Ham <myungjoo.ham@...sung.com>
- *
- * based on android/drivers/switch/switch_class.c
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@...roid.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/err.h>
-#include <linux/extcon.h>
-#include <linux/slab.h>
-
-/*
- * extcon_cable_name suggests the standard cable names for commonly used
- * cable types.
- *
- * However, please do not use extcon_cable_name directly for extcon_dev
- * struct's supported_cable pointer unless your device really supports
- * every single port-type of the following cable names. Please choose cable
- * names that are actually used in your extcon device.
- */
-const char *extcon_cable_name[] = {
- [EXTCON_USB] = "USB",
- [EXTCON_USB_HOST] = "USB-Host",
- [EXTCON_TA] = "TA",
- [EXTCON_FAST_CHARGER] = "Fast-charger",
- [EXTCON_SLOW_CHARGER] = "Slow-charger",
- [EXTCON_CHARGE_DOWNSTREAM] = "Charge-downstream",
- [EXTCON_HDMI] = "HDMI",
- [EXTCON_MHL] = "MHL",
- [EXTCON_DVI] = "DVI",
- [EXTCON_VGA] = "VGA",
- [EXTCON_DOCK] = "Dock",
- [EXTCON_LINE_IN] = "Line-in",
- [EXTCON_LINE_OUT] = "Line-out",
- [EXTCON_MIC_IN] = "Microphone",
- [EXTCON_HEADPHONE_OUT] = "Headphone",
- [EXTCON_SPDIF_IN] = "SPDIF-in",
- [EXTCON_SPDIF_OUT] = "SPDIF-out",
- [EXTCON_VIDEO_IN] = "Video-in",
- [EXTCON_VIDEO_OUT] = "Video-out",
- [EXTCON_MECHANICAL] = "Mechanical",
-
- NULL,
-};
-
-static struct class *extcon_class;
-#if defined(CONFIG_ANDROID)
-static struct class_compat *switch_class;
-#endif /* CONFIG_ANDROID */
-
-static LIST_HEAD(extcon_dev_list);
-static DEFINE_MUTEX(extcon_dev_list_lock);
-
-/**
- * check_mutually_exclusive - Check if new_state violates mutually_exclusive
- * condition.
- * @edev: the extcon device
- * @new_state: new cable attach status for @edev
- *
- * Returns 0 if nothing violates. Returns the index + 1 for the first
- * violated condition.
- */
-static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state)
-{
- int i = 0;
-
- if (!edev->mutually_exclusive)
- return 0;
-
- for (i = 0; edev->mutually_exclusive[i]; i++) {
- int count = 0, j;
- u32 correspondants = new_state & edev->mutually_exclusive[i];
- u32 exp = 1;
-
- for (j = 0; j < 32; j++) {
- if (exp & correspondants)
- count++;
- if (count > 1)
- return i + 1;
- exp <<= 1;
- }
- }
-
- return 0;
-}
-
-static ssize_t state_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- int i, count = 0;
- struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
-
- if (edev->print_state) {
- int ret = edev->print_state(edev, buf);
-
- if (ret >= 0)
- return ret;
- /* Use default if failed */
- }
-
- if (edev->max_supported == 0)
- return sprintf(buf, "%u\n", edev->state);
-
- for (i = 0; i < SUPPORTED_CABLE_MAX; i++) {
- if (!edev->supported_cable[i])
- break;
- count += sprintf(buf + count, "%s=%d\n",
- edev->supported_cable[i],
- !!(edev->state & (1 << i)));
- }
-
- return count;
-}
-
-int extcon_set_state(struct extcon_dev *edev, u32 state);
-static ssize_t state_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- u32 state;
- ssize_t ret = 0;
- struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
-
- ret = sscanf(buf, "0x%x", &state);
- if (ret == 0)
- ret = -EINVAL;
- else
- ret = extcon_set_state(edev, state);
-
- if (ret < 0)
- return ret;
-
- return count;
-}
-
-static ssize_t name_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
-
- /* Optional callback given by the user */
- if (edev->print_name) {
- int ret = edev->print_name(edev, buf);
- if (ret >= 0)
- return ret;
- }
-
- return sprintf(buf, "%s\n", dev_name(edev->dev));
-}
-
-static ssize_t cable_name_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct extcon_cable *cable = container_of(attr, struct extcon_cable,
- attr_name);
-
- return sprintf(buf, "%s\n",
- cable->edev->supported_cable[cable->cable_index]);
-}
-
-static ssize_t cable_state_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct extcon_cable *cable = container_of(attr, struct extcon_cable,
- attr_state);
-
- return sprintf(buf, "%d\n",
- extcon_get_cable_state_(cable->edev,
- cable->cable_index));
-}
-
-static ssize_t cable_state_store(struct device *dev,
- struct device_attribute *attr, const char *buf,
- size_t count)
-{
- struct extcon_cable *cable = container_of(attr, struct extcon_cable,
- attr_state);
- int ret, state;
-
- ret = sscanf(buf, "%d", &state);
- if (ret == 0)
- ret = -EINVAL;
- else
- ret = extcon_set_cable_state_(cable->edev, cable->cable_index,
- state);
-
- if (ret < 0)
- return ret;
- return count;
-}
-
-/**
- * extcon_update_state() - Update the cable attach states of the extcon device
- * only for the masked bits.
- * @edev: the extcon device
- * @mask: the bit mask to designate updated bits.
- * @state: new cable attach status for @edev
- *
- * Changing the state sends uevent with environment variable containing
- * the name of extcon device (envp[0]) and the state output (envp[1]).
- * Tizen uses this format for extcon device to get events from ports.
- * Android uses this format as well.
- *
- * Note that the notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
- */
-int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
-{
- char name_buf[120];
- char state_buf[120];
- char *prop_buf;
- char *envp[3];
- int env_offset = 0;
- int length;
- unsigned long flags;
-
- spin_lock_irqsave(&edev->lock, flags);
-
- if (edev->state != ((edev->state & ~mask) | (state & mask))) {
- u32 old_state = edev->state;
-
- if (check_mutually_exclusive(edev, (edev->state & ~mask) |
- (state & mask))) {
- spin_unlock_irqrestore(&edev->lock, flags);
- return -EPERM;
- }
-
- edev->state &= ~mask;
- edev->state |= state & mask;
-
- raw_notifier_call_chain(&edev->nh, old_state, edev);
-
- /* This could be in interrupt handler */
- prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
- if (prop_buf) {
- length = name_show(edev->dev, NULL, prop_buf);
- if (length > 0) {
- if (prop_buf[length - 1] == '\n')
- prop_buf[length - 1] = 0;
- snprintf(name_buf, sizeof(name_buf),
- "NAME=%s", prop_buf);
- envp[env_offset++] = name_buf;
- }
- length = state_show(edev->dev, NULL, prop_buf);
- if (length > 0) {
- if (prop_buf[length - 1] == '\n')
- prop_buf[length - 1] = 0;
- snprintf(state_buf, sizeof(state_buf),
- "STATE=%s", prop_buf);
- envp[env_offset++] = state_buf;
- }
- envp[env_offset] = NULL;
- /* Unlock early before uevent */
- spin_unlock_irqrestore(&edev->lock, flags);
-
- kobject_uevent_env(&edev->dev->kobj, KOBJ_CHANGE, envp);
- free_page((unsigned long)prop_buf);
- } else {
- /* Unlock early before uevent */
- spin_unlock_irqrestore(&edev->lock, flags);
-
- dev_err(edev->dev, "out of memory in extcon_set_state\n");
- kobject_uevent(&edev->dev->kobj, KOBJ_CHANGE);
- }
- } else {
- /* No changes */
- spin_unlock_irqrestore(&edev->lock, flags);
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(extcon_update_state);
-
-/**
- * extcon_set_state() - Set the cable attach states of the extcon device.
- * @edev: the extcon device
- * @state: new cable attach status for @edev
- *
- * Note that notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
- */
-int extcon_set_state(struct extcon_dev *edev, u32 state)
-{
- return extcon_update_state(edev, 0xffffffff, state);
-}
-EXPORT_SYMBOL_GPL(extcon_set_state);
-
-/**
- * extcon_find_cable_index() - Get the cable index based on the cable name.
- * @edev: the extcon device that has the cable.
- * @cable_name: cable name to be searched.
- *
- * Note that accessing a cable state based on cable_index is faster than
- * cable_name because using cable_name induces a loop with strncmp().
- * Thus, when get/set_cable_state is repeatedly used, using cable_index
- * is recommended.
- */
-int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name)
-{
- int i;
-
- if (edev->supported_cable) {
- for (i = 0; edev->supported_cable[i]; i++) {
- if (!strncmp(edev->supported_cable[i],
- cable_name, CABLE_NAME_MAX))
- return i;
- }
- }
-
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(extcon_find_cable_index);
-
-/**
- * extcon_get_cable_state_() - Get the status of a specific cable.
- * @edev: the extcon device that has the cable.
- * @index: cable index that can be retrieved by extcon_find_cable_index().
- */
-int extcon_get_cable_state_(struct extcon_dev *edev, int index)
-{
- if (index < 0 || (edev->max_supported && edev->max_supported <= index))
- return -EINVAL;
-
- return !!(edev->state & (1 << index));
-}
-EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
-
-/**
- * extcon_get_cable_state() - Get the status of a specific cable.
- * @edev: the extcon device that has the cable.
- * @cable_name: cable name.
- *
- * Note that this is slower than extcon_get_cable_state_.
- */
-int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name)
-{
- return extcon_get_cable_state_(edev, extcon_find_cable_index
- (edev, cable_name));
-}
-EXPORT_SYMBOL_GPL(extcon_get_cable_state);
-
-/**
- * extcon_get_cable_state_() - Set the status of a specific cable.
- * @edev: the extcon device that has the cable.
- * @index: cable index that can be retrieved by extcon_find_cable_index().
- * @cable_state: the new cable status. The default semantics is
- * true: attached / false: detached.
- */
-int extcon_set_cable_state_(struct extcon_dev *edev,
- int index, bool cable_state)
-{
- u32 state;
-
- if (index < 0 || (edev->max_supported && edev->max_supported <= index))
- return -EINVAL;
-
- state = cable_state ? (1 << index) : 0;
- return extcon_update_state(edev, 1 << index, state);
-}
-EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
-
-/**
- * extcon_get_cable_state() - Set the status of a specific cable.
- * @edev: the extcon device that has the cable.
- * @cable_name: cable name.
- * @cable_state: the new cable status. The default semantics is
- * true: attached / false: detached.
- *
- * Note that this is slower than extcon_set_cable_state_.
- */
-int extcon_set_cable_state(struct extcon_dev *edev,
- const char *cable_name, bool cable_state)
-{
- return extcon_set_cable_state_(edev, extcon_find_cable_index
- (edev, cable_name), cable_state);
-}
-EXPORT_SYMBOL_GPL(extcon_set_cable_state);
-
-/**
- * extcon_get_extcon_dev() - Get the extcon device instance from the name
- * @extcon_name: The extcon name provided with extcon_dev_register()
- */
-struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
-{
- struct extcon_dev *sd;
-
- mutex_lock(&extcon_dev_list_lock);
- list_for_each_entry(sd, &extcon_dev_list, entry) {
- if (!strcmp(sd->name, extcon_name))
- goto out;
- }
- sd = NULL;
-out:
- mutex_unlock(&extcon_dev_list_lock);
- return sd;
-}
-EXPORT_SYMBOL_GPL(extcon_get_extcon_dev);
-
-static int _call_per_cable(struct notifier_block *nb, unsigned long val,
- void *ptr)
-{
- struct extcon_specific_cable_nb *obj = container_of(nb,
- struct extcon_specific_cable_nb, internal_nb);
- struct extcon_dev *edev = ptr;
-
- if ((val & (1 << obj->cable_index)) !=
- (edev->state & (1 << obj->cable_index))) {
- bool cable_state = true;
-
- obj->previous_value = val;
-
- if (val & (1 << obj->cable_index))
- cable_state = false;
-
- return obj->user_nb->notifier_call(obj->user_nb,
- cable_state, ptr);
- }
-
- return NOTIFY_OK;
-}
-
-/**
- * extcon_register_interest() - Register a notifier for a state change of a
- * specific cable, not an entire set of cables of a
- * extcon device.
- * @obj: an empty extcon_specific_cable_nb object to be returned.
- * @extcon_name: the name of extcon device.
- * @cable_name: the target cable name.
- * @nb: the notifier block to get notified.
- *
- * Provide an empty extcon_specific_cable_nb. extcon_register_interest() sets
- * the struct for you.
- *
- * extcon_register_interest is a helper function for those who want to get
- * notification for a single specific cable's status change. If a user wants
- * to get notification for any changes of all cables of a extcon device,
- * he/she should use the general extcon_register_notifier().
- *
- * Note that the second parameter given to the callback of nb (val) is
- * "old_state", not the current state. The current state can be retrieved
- * by looking at the third pameter (edev pointer)'s state value.
- */
-int extcon_register_interest(struct extcon_specific_cable_nb *obj,
- const char *extcon_name, const char *cable_name,
- struct notifier_block *nb)
-{
- if (!obj || !extcon_name || !cable_name || !nb)
- return -EINVAL;
-
- obj->edev = extcon_get_extcon_dev(extcon_name);
- if (!obj->edev)
- return -ENODEV;
-
- obj->cable_index = extcon_find_cable_index(obj->edev, cable_name);
- if (obj->cable_index < 0)
- return -ENODEV;
-
- obj->user_nb = nb;
-
- obj->internal_nb.notifier_call = _call_per_cable;
-
- return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb);
-}
-
-/**
- * extcon_unregister_interest() - Unregister the notifier registered by
- * extcon_register_interest().
- * @obj: the extcon_specific_cable_nb object returned by
- * extcon_register_interest().
- */
-int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
-{
- if (!obj)
- return -EINVAL;
-
- return raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
-}
-
-/**
- * extcon_register_notifier() - Register a notifiee to get notified by
- * any attach status changes from the extcon.
- * @edev: the extcon device.
- * @nb: a notifier block to be registered.
- *
- * Note that the second parameter given to the callback of nb (val) is
- * "old_state", not the current state. The current state can be retrieved
- * by looking at the third pameter (edev pointer)'s state value.
- */
-int extcon_register_notifier(struct extcon_dev *edev,
- struct notifier_block *nb)
-{
- return raw_notifier_chain_register(&edev->nh, nb);
-}
-EXPORT_SYMBOL_GPL(extcon_register_notifier);
-
-/**
- * extcon_unregister_notifier() - Unregister a notifiee from the extcon device.
- * @edev: the extcon device.
- * @nb: a registered notifier block to be unregistered.
- */
-int extcon_unregister_notifier(struct extcon_dev *edev,
- struct notifier_block *nb)
-{
- return raw_notifier_chain_unregister(&edev->nh, nb);
-}
-EXPORT_SYMBOL_GPL(extcon_unregister_notifier);
-
-static struct device_attribute extcon_attrs[] = {
- __ATTR(state, S_IRUGO | S_IWUSR, state_show, state_store),
- __ATTR_RO(name),
- __ATTR_NULL,
-};
-
-static int create_extcon_class(void)
-{
- if (!extcon_class) {
- extcon_class = class_create(THIS_MODULE, "extcon");
- if (IS_ERR(extcon_class))
- return PTR_ERR(extcon_class);
- extcon_class->dev_attrs = extcon_attrs;
-
-#if defined(CONFIG_ANDROID)
- switch_class = class_compat_register("switch");
- if (WARN(!switch_class, "cannot allocate"))
- return -ENOMEM;
-#endif /* CONFIG_ANDROID */
- }
-
- return 0;
-}
-
-static void extcon_cleanup(struct extcon_dev *edev, bool skip)
-{
- mutex_lock(&extcon_dev_list_lock);
- list_del(&edev->entry);
- mutex_unlock(&extcon_dev_list_lock);
-
- if (!skip && get_device(edev->dev)) {
- int index;
-
- if (edev->mutually_exclusive && edev->max_supported) {
- for (index = 0; edev->mutually_exclusive[index];
- index++)
- kfree(edev->d_attrs_muex[index].attr.name);
- kfree(edev->d_attrs_muex);
- kfree(edev->attrs_muex);
- }
-
- for (index = 0; index < edev->max_supported; index++)
- kfree(edev->cables[index].attr_g.name);
-
- if (edev->max_supported) {
- kfree(edev->extcon_dev_type.groups);
- kfree(edev->cables);
- }
-
- device_unregister(edev->dev);
- put_device(edev->dev);
- }
-
- kfree(edev->dev);
-}
-
-static void extcon_dev_release(struct device *dev)
-{
- struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
-
- extcon_cleanup(edev, true);
-}
-
-static const char *muex_name = "mutually_exclusive";
-static void dummy_sysfs_dev_release(struct device *dev)
-{
-}
-
-/**
- * extcon_dev_register() - Register a new extcon device
- * @edev : the new extcon device (should be allocated before calling)
- * @dev : the parent device for this extcon device.
- *
- * Among the members of edev struct, please set the "user initializing data"
- * in any case and set the "optional callbacks" if required. However, please
- * do not set the values of "internal data", which are initialized by
- * this function.
- */
-int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
-{
- int ret, index = 0;
-
- if (!extcon_class) {
- ret = create_extcon_class();
- if (ret < 0)
- return ret;
- }
-
- if (edev->supported_cable) {
- /* Get size of array */
- for (index = 0; edev->supported_cable[index]; index++)
- ;
- edev->max_supported = index;
- } else {
- edev->max_supported = 0;
- }
-
- if (index > SUPPORTED_CABLE_MAX) {
- dev_err(edev->dev, "extcon: maximum number of supported cables exceeded.\n");
- return -EINVAL;
- }
-
- edev->dev = kzalloc(sizeof(struct device), GFP_KERNEL);
- if (!edev->dev)
- return -ENOMEM;
- edev->dev->parent = dev;
- edev->dev->class = extcon_class;
- edev->dev->release = extcon_dev_release;
-
- dev_set_name(edev->dev, edev->name ? edev->name : dev_name(dev));
-
- if (edev->max_supported) {
- char buf[10];
- char *str;
- struct extcon_cable *cable;
-
- edev->cables = kzalloc(sizeof(struct extcon_cable) *
- edev->max_supported, GFP_KERNEL);
- if (!edev->cables) {
- ret = -ENOMEM;
- goto err_sysfs_alloc;
- }
- for (index = 0; index < edev->max_supported; index++) {
- cable = &edev->cables[index];
-
- snprintf(buf, 10, "cable.%d", index);
- str = kzalloc(sizeof(char) * (strlen(buf) + 1),
- GFP_KERNEL);
- if (!str) {
- for (index--; index >= 0; index--) {
- cable = &edev->cables[index];
- kfree(cable->attr_g.name);
- }
- ret = -ENOMEM;
-
- goto err_alloc_cables;
- }
- strcpy(str, buf);
-
- cable->edev = edev;
- cable->cable_index = index;
- cable->attrs[0] = &cable->attr_name.attr;
- cable->attrs[1] = &cable->attr_state.attr;
- cable->attrs[2] = NULL;
- cable->attr_g.name = str;
- cable->attr_g.attrs = cable->attrs;
-
- cable->attr_name.attr.name = "name";
- cable->attr_name.attr.mode = 0444;
- cable->attr_name.show = cable_name_show;
-
- cable->attr_state.attr.name = "state";
- cable->attr_state.attr.mode = 0644;
- cable->attr_state.show = cable_state_show;
- cable->attr_state.store = cable_state_store;
- }
- }
-
- if (edev->max_supported && edev->mutually_exclusive) {
- char buf[80];
- char *name;
-
- /* Count the size of mutually_exclusive array */
- for (index = 0; edev->mutually_exclusive[index]; index++)
- ;
-
- edev->attrs_muex = kzalloc(sizeof(struct attribute *) *
- (index + 1), GFP_KERNEL);
- if (!edev->attrs_muex) {
- ret = -ENOMEM;
- goto err_muex;
- }
-
- edev->d_attrs_muex = kzalloc(sizeof(struct device_attribute) *
- index, GFP_KERNEL);
- if (!edev->d_attrs_muex) {
- ret = -ENOMEM;
- kfree(edev->attrs_muex);
- goto err_muex;
- }
-
- for (index = 0; edev->mutually_exclusive[index]; index++) {
- sprintf(buf, "0x%x", edev->mutually_exclusive[index]);
- name = kzalloc(sizeof(char) * (strlen(buf) + 1),
- GFP_KERNEL);
- if (!name) {
- for (index--; index >= 0; index--) {
- kfree(edev->d_attrs_muex[index].attr.
- name);
- }
- kfree(edev->d_attrs_muex);
- kfree(edev->attrs_muex);
- ret = -ENOMEM;
- goto err_muex;
- }
- strcpy(name, buf);
- edev->d_attrs_muex[index].attr.name = name;
- edev->d_attrs_muex[index].attr.mode = 0000;
- edev->attrs_muex[index] = &edev->d_attrs_muex[index]
- .attr;
- }
- edev->attr_g_muex.name = muex_name;
- edev->attr_g_muex.attrs = edev->attrs_muex;
-
- }
-
- if (edev->max_supported) {
- edev->extcon_dev_type.groups =
- kzalloc(sizeof(struct attribute_group *) *
- (edev->max_supported + 2), GFP_KERNEL);
- if (!edev->extcon_dev_type.groups) {
- ret = -ENOMEM;
- goto err_alloc_groups;
- }
-
- edev->extcon_dev_type.name = dev_name(edev->dev);
- edev->extcon_dev_type.release = dummy_sysfs_dev_release;
-
- for (index = 0; index < edev->max_supported; index++)
- edev->extcon_dev_type.groups[index] =
- &edev->cables[index].attr_g;
- if (edev->mutually_exclusive)
- edev->extcon_dev_type.groups[index] =
- &edev->attr_g_muex;
-
- edev->dev->type = &edev->extcon_dev_type;
- }
-
- ret = device_register(edev->dev);
- if (ret) {
- put_device(edev->dev);
- goto err_dev;
- }
-#if defined(CONFIG_ANDROID)
- if (switch_class)
- ret = class_compat_create_link(switch_class, edev->dev,
- NULL);
-#endif /* CONFIG_ANDROID */
-
- spin_lock_init(&edev->lock);
-
- RAW_INIT_NOTIFIER_HEAD(&edev->nh);
-
- dev_set_drvdata(edev->dev, edev);
- edev->state = 0;
-
- mutex_lock(&extcon_dev_list_lock);
- list_add(&edev->entry, &extcon_dev_list);
- mutex_unlock(&extcon_dev_list_lock);
-
- return 0;
-
-err_dev:
- if (edev->max_supported)
- kfree(edev->extcon_dev_type.groups);
-err_alloc_groups:
- if (edev->max_supported && edev->mutually_exclusive) {
- for (index = 0; edev->mutually_exclusive[index]; index++)
- kfree(edev->d_attrs_muex[index].attr.name);
- kfree(edev->d_attrs_muex);
- kfree(edev->attrs_muex);
- }
-err_muex:
- for (index = 0; index < edev->max_supported; index++)
- kfree(edev->cables[index].attr_g.name);
-err_alloc_cables:
- if (edev->max_supported)
- kfree(edev->cables);
-err_sysfs_alloc:
- kfree(edev->dev);
- return ret;
-}
-EXPORT_SYMBOL_GPL(extcon_dev_register);
-
-/**
- * extcon_dev_unregister() - Unregister the extcon device.
- * @edev: the extcon device instance to be unregistered.
- *
- * Note that this does not call kfree(edev) because edev was not allocated
- * by this class.
- */
-void extcon_dev_unregister(struct extcon_dev *edev)
-{
- extcon_cleanup(edev, false);
-}
-EXPORT_SYMBOL_GPL(extcon_dev_unregister);
-
-static int __init extcon_class_init(void)
-{
- return create_extcon_class();
-}
-module_init(extcon_class_init);
-
-static void __exit extcon_class_exit(void)
-{
- class_destroy(extcon_class);
-}
-module_exit(extcon_class_exit);
-
-MODULE_AUTHOR("Mike Lockwood <lockwood@...roid.com>");
-MODULE_AUTHOR("Donggeun Kim <dg77.kim@...sung.com>");
-MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@...sung.com>");
-MODULE_DESCRIPTION("External connector (extcon) class driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/extcon/extcon_gpio.c b/drivers/extcon/extcon_gpio.c
deleted file mode 100644
index 71d3ab7..0000000
--- a/drivers/extcon/extcon_gpio.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * drivers/extcon/extcon_gpio.c
- *
- * Single-state GPIO extcon driver based on extcon class
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@...roid.com>
- *
- * Modified by MyungJoo Ham <myungjoo.ham@...sung.com> to support extcon
- * (originally switch class is supported)
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/gpio.h>
-#include <linux/extcon.h>
-#include <linux/extcon/extcon_gpio.h>
-
-struct gpio_extcon_data {
- struct extcon_dev edev;
- unsigned gpio;
- const char *state_on;
- const char *state_off;
- int irq;
- struct delayed_work work;
- unsigned long debounce_jiffies;
-};
-
-static void gpio_extcon_work(struct work_struct *work)
-{
- int state;
- struct gpio_extcon_data *data =
- container_of(to_delayed_work(work), struct gpio_extcon_data,
- work);
-
- state = gpio_get_value(data->gpio);
- extcon_set_state(&data->edev, state);
-}
-
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
-{
- struct gpio_extcon_data *extcon_data = dev_id;
-
- schedule_delayed_work(&extcon_data->work,
- extcon_data->debounce_jiffies);
- return IRQ_HANDLED;
-}
-
-static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf)
-{
- struct gpio_extcon_data *extcon_data =
- container_of(edev, struct gpio_extcon_data, edev);
- const char *state;
- if (extcon_get_state(edev))
- state = extcon_data->state_on;
- else
- state = extcon_data->state_off;
-
- if (state)
- return sprintf(buf, "%s\n", state);
- return -EINVAL;
-}
-
-static int __devinit gpio_extcon_probe(struct platform_device *pdev)
-{
- struct gpio_extcon_platform_data *pdata = pdev->dev.platform_data;
- struct gpio_extcon_data *extcon_data;
- int ret = 0;
-
- if (!pdata)
- return -EBUSY;
- if (!pdata->irq_flags) {
- dev_err(&pdev->dev, "IRQ flag is not specified.\n");
- return -EINVAL;
- }
-
- extcon_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
- GFP_KERNEL);
- if (!extcon_data)
- return -ENOMEM;
-
- extcon_data->edev.name = pdata->name;
- extcon_data->gpio = pdata->gpio;
- extcon_data->state_on = pdata->state_on;
- extcon_data->state_off = pdata->state_off;
- if (pdata->state_on && pdata->state_off)
- extcon_data->edev.print_state = extcon_gpio_print_state;
- extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce);
-
- ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
- if (ret < 0)
- return ret;
-
- ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
- pdev->name);
- if (ret < 0)
- goto err;
-
- INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
-
- extcon_data->irq = gpio_to_irq(extcon_data->gpio);
- if (extcon_data->irq < 0) {
- ret = extcon_data->irq;
- goto err;
- }
-
- ret = request_any_context_irq(extcon_data->irq, gpio_irq_handler,
- pdata->irq_flags, pdev->name,
- extcon_data);
- if (ret < 0)
- goto err;
-
- platform_set_drvdata(pdev, extcon_data);
- /* Perform initial detection */
- gpio_extcon_work(&extcon_data->work.work);
-
- return 0;
-
-err:
- extcon_dev_unregister(&extcon_data->edev);
-
- return ret;
-}
-
-static int __devexit gpio_extcon_remove(struct platform_device *pdev)
-{
- struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
-
- cancel_delayed_work_sync(&extcon_data->work);
- free_irq(extcon_data->irq, extcon_data);
- extcon_dev_unregister(&extcon_data->edev);
-
- return 0;
-}
-
-static struct platform_driver gpio_extcon_driver = {
- .probe = gpio_extcon_probe,
- .remove = __devexit_p(gpio_extcon_remove),
- .driver = {
- .name = "extcon-gpio",
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(gpio_extcon_driver);
-
-MODULE_AUTHOR("Mike Lockwood <lockwood@...roid.com>");
-MODULE_DESCRIPTION("GPIO extcon driver");
-MODULE_LICENSE("GPL");
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists