[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1344648306-15619-16-git-send-email-cyril@ti.com>
Date: Fri, 10 Aug 2012 21:24:58 -0400
From: Cyril Chemparathy <cyril@...com>
To: <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
CC: <arnd@...db.de>, <catalin.marinas@....com>,
<grant.likely@...retlab.ca>, <nico@...aro.org>,
<linux@....linux.org.uk>, <will.deacon@....com>,
Cyril Chemparathy <cyril@...com>,
Vitaly Andrianov <vitalya@...com>
Subject: [PATCH v2 15/22] ARM: mm: use physical addresses in highmem sanity checks
This patch modifies the highmem sanity checking code to use physical addresses
instead. This change eliminates the wrap-around problems associated with the
original virtual address based checks, and this simplifies the code a bit.
The one constraint imposed here is that low physical memory must be mapped in
a monotonically increasing fashion if there are multiple banks of memory,
i.e., x < y must => pa(x) < pa(y).
Signed-off-by: Cyril Chemparathy <cyril@...com>
Signed-off-by: Vitaly Andrianov <vitalya@...com>
---
arch/arm/mm/mmu.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 53eeeb8..f764c03 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -895,6 +895,7 @@ phys_addr_t arm_lowmem_limit __initdata = 0;
void __init sanity_check_meminfo(void)
{
int i, j, highmem = 0;
+ phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
struct membank *bank = &meminfo.bank[j];
@@ -904,8 +905,7 @@ void __init sanity_check_meminfo(void)
highmem = 1;
#ifdef CONFIG_HIGHMEM
- if (__va(bank->start) >= vmalloc_min ||
- __va(bank->start) < (void *)PAGE_OFFSET)
+ if (bank->start >= vmalloc_limit)
highmem = 1;
bank->highmem = highmem;
@@ -914,8 +914,8 @@ void __init sanity_check_meminfo(void)
* Split those memory banks which are partially overlapping
* the vmalloc area greatly simplifying things later.
*/
- if (!highmem && __va(bank->start) < vmalloc_min &&
- bank->size > vmalloc_min - __va(bank->start)) {
+ if (!highmem && bank->start < vmalloc_limit &&
+ bank->size > vmalloc_limit - bank->start) {
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
"ignoring high memory\n");
@@ -924,12 +924,12 @@ void __init sanity_check_meminfo(void)
(meminfo.nr_banks - i) * sizeof(*bank));
meminfo.nr_banks++;
i++;
- bank[1].size -= vmalloc_min - __va(bank->start);
- bank[1].start = __pa(vmalloc_min - 1) + 1;
+ bank[1].size -= vmalloc_limit - bank->start;
+ bank[1].start = vmalloc_limit;
bank[1].highmem = highmem = 1;
j++;
}
- bank->size = vmalloc_min - __va(bank->start);
+ bank->size = vmalloc_limit - bank->start;
}
#else
bank->highmem = highmem;
@@ -949,8 +949,7 @@ void __init sanity_check_meminfo(void)
* Check whether this memory bank would entirely overlap
* the vmalloc area.
*/
- if (__va(bank->start) >= vmalloc_min ||
- __va(bank->start) < (void *)PAGE_OFFSET) {
+ if (bank->start >= vmalloc_limit) {
printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
"(vmalloc region overlap).\n",
(unsigned long long)bank->start,
@@ -962,9 +961,8 @@ void __init sanity_check_meminfo(void)
* Check whether this memory bank would partially overlap
* the vmalloc area.
*/
- if (__va(bank->start + bank->size) > vmalloc_min ||
- __va(bank->start + bank->size) < __va(bank->start)) {
- unsigned long newsize = vmalloc_min - __va(bank->start);
+ if (bank->start + bank->size > vmalloc_limit)
+ unsigned long newsize = vmalloc_limit - bank->start;
printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
"to -%.8llx (vmalloc region overlap).\n",
(unsigned long long)bank->start,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists