linux-kernel - Re: [PATCH] Intel xhci: Only switch the switchable ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CADXHx7YQqvV6Jtn0ahhxtMbzqcmKPOntBKEzQh4htOTen6-S7A@mail.gmail.com>
Date:	Tue, 14 Aug 2012 15:14:08 +0800
From:	Keng-Yu Lin <kengyu@...onical.com>
To:	Sarah Sharp <sarah.a.sharp@...ux.intel.com>
Cc:	Greg Kroah-Hartman <gregkh@...e.de>, linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Jeremy Kerr <jeremy.kerr@...onical.com>
Subject: Re: [PATCH] Intel xhci: Only switch the switchable ports

Hi Sarah:
  This is the dmesg with CONFIG_USB_XHCI_HCD_DEBUGGING=y from a laptop
with the issue.
  I hope the log helps the analysis.

  cheers,
-kengyu

On Fri, Aug 10, 2012 at 3:38 AM, Sarah Sharp
<sarah.a.sharp@...ux.intel.com> wrote:
> On Fri, Aug 10, 2012 at 12:13:19AM +0800, Keng-Yu Lin wrote:
>> On Thu, Aug 9, 2012 at 10:24 PM, Sarah Sharp
>> <sarah.a.sharp@...ux.intel.com> wrote:
>> > On Thu, Aug 09, 2012 at 05:31:51PM +0800, Keng-Yu Lin wrote:
>> >> With a previous patch to enable the EHCI/XHCI port switching, it switches
>> >> all the available ports.
>> >>
>> >> The assumption is not correct because the BIOS may expect some ports
>> >> not switchable by the OS.
>> >
>> > Why would the BIOS expect some ports to not be switchable?  I know that
>> > we internally at Intel had discussed some theoretical reasons why it
>> > might not be good to switch some ports, but when I presented the
>> > original patch with this same code in it to Linux USB mailing list, both
>> > Alan and Greg said, "Why not unconditionally switch ports?"  I had no
>> > good examples at the time.
>> >
>> > Is this causing issues with some particular BIOS?
>> >
>>
>> Yes, this is causing the internal webcam missing on the USB bus as I
>> observed on some HM70-based laptops.
>
> Does anything show up in dmesg when you turn on
> CONFIG_USB_XHCI_HCD_DEBUGGING?  It would be good to know if it is
> totally not electrically present, or if there's some sort of xHCI
> hardware or software issue that's preventing the webcam from being
> enumerated.
>
>> The internal webcam is attached to one port that is controlled by the
>> xhci host.
>> But the other ports with the outer plugs work well after booting. I
>> cannot test the USB port of the internal webcam easily (without
>> tearing down the laptop :-/).
>>
>> I also tried some similar HM77-based models. HM77 has no this issue.
>> This could be some chipset mystery I am not aware now.
>
> Could be.  Can you use any SMBIOS information to change the port
> switchover only for those HM70-based laptops?  And is it a particular
> laptop vendor or all HM70 laptops?
>
> As Alan said, I would rather not trust the BIOS to provide the correct
> port mask.
>
> Sarah Sharp

Download attachment "dmesg.xhcidebug" of type "application/octet-stream" (78501 bytes)

Download attachment "dmesg.xhcidebug.3.5" of type "application/octet-stream" (78520 bytes)