Message-Id: <1345048126-24054-1-git-send-email-swarren@wwwdotorg.org>
Date:	Wed, 15 Aug 2012 10:28:46 -0600
From:	Stephen Warren <swarren@...dotorg.org>
To:	Samuel Ortiz <sameo@...ux.intel.com>
Cc:	Mark Brown <broonie@...nsource.wolfsonmicro.com>,
	devicetree-discuss@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
	Gyungoh Yoo <jack.yoo@...im-ic.com>,
	Stephen Warren <swarren@...dia.com>
Subject: [PATCH V4] mfd: add MAX8907 core driver

From: Gyungoh Yoo <jack.yoo@...im-ic.com>

The MAX8907 is an I2C-based power-management IC containing voltage
regulators, a reset controller, a real-time clock, and a touch-screen
controller.

The original driver was written by:
* Gyungoh Yoo <jack.yoo@...im-ic.com>

Various fixes and enhancements by:
* Jin Park <jinyoungp@...dia.com>
* Tom Cherry <tcherry@...dia.com>
* Prashant Gaikwad <pgaikwad@...dia.com>
* Dan Willemsen <dwillemsen@...dia.com>
* Laxman Dewangan <ldewangan@...dia.com>

During upstreaming, I (swarren):
* Converted to regmap.
* Converted to regmap-irq.
* Allowed probing from device tree.
* Renamed from max8907c->max8907, since the driver covers at least the
  C and B revisions.
* General cleanup.

Signed-off-by: Gyungoh Yoo <jack.yoo@...im-ic.com>
Signed-off-by: Stephen Warren <swarren@...dia.com>
Reviewed-by: Mark Brown <broonie@...nsource.wolfsonmicro.com> #v3
---
v4:
Updates to match latest max8907c-regulator.c, which is now applied:
* Document mbatt-supply in DT bindings, modify example to add mbatt
  regulator and point *-supply properties it.
* Add MAX8907_MBATT define to max8907.h, increment all other regulator
  IDs by 1.
* Remove all references to WLED regulator and associated lxw-supply from
  DT binding documentation and header file, per review of the regulator
  driver.
* Add back IRQ definitions into header.
v3:
* Remove usage of new (dropped) regmap_add_irq_chips() API; the IRQ core
  handles sharing threaded interrupts, so there's no need to do anything
  much special to use them.
v2:
* Rework interrupt code to use regmap-irq. NOTE: This depends on new regmap
  feature/patches not yet checked in.
* Implement precious regmap callback to prevent debugfs reading clear-on-
  read IRQ status registers
* Fix devm_regmap_init_i2c() parameter
* Add *-supply properties to DT binding doc.
---
 .../devicetree/bindings/regulator/max8907.txt      |   71 +++++
 drivers/mfd/Kconfig                                |   12 +
 drivers/mfd/Makefile                               |    1 +
 drivers/mfd/max8907.c                              |  331 ++++++++++++++++++++
 include/linux/mfd/max8907.h                        |  250 +++++++++++++++
 5 files changed, 665 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/max8907.txt
 create mode 100644 drivers/mfd/max8907.c
 create mode 100644 include/linux/mfd/max8907.h

diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt
new file mode 100644
index 0000000..4fd847f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8907.txt
@@ -0,0 +1,71 @@
+MAX8907 regulator
+
+Required properties:
+- compatible: "maxim,max8907"
+- reg: I2C slave address
+- interrupts: The interrupt output of the controller
+- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC.
+- in-v1-supply: The input supply for SD1.
+- in-v2-supply: The input supply for SD2.
+- in-v3-supply: The input supply for SD3.
+- in1-supply: The input supply for LDO1.
+...
+- in20-supply: The input supply for LDO20.
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the regulator-compatible
+  property, with valid values listed below. The content of each sub-node
+  is defined by the standard binding for regulators; see regulator.txt.
+
+Valid regulator-compatible values are:
+
+  sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10,
+  ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v,
+  out33v, bbat, sdby, vrtc.
+
+Example:
+
+		max8907@3c {
+			compatible = "maxim,max8907";
+			reg = <0x3c>;
+			interrupts = <0 86 0x4>;
+
+			mbatt-supply = <&some_reg>;
+			in-v1-supply = <&mbatt_reg>;
+			...
+			in1-supply = <&mbatt_reg>;
+			...
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mbatt_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "mbatt";
+					regulator-name = "vbat_pmu";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sd1";
+					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sd2";
+					regulator-name = "nvvdd_sv2,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+...
+			};
+		};
+	};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d1facef..856ec00 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -476,6 +476,18 @@ config MFD_MAX77693
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_MAX8907
+	tristate "Maxim Semiconductor MAX8907 PMIC Support"
+	select MFD_CORE
+	depends on I2C=y && GENERIC_HARDIRQS
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  Say yes here to support for Maxim Semiconductor MAX8907. This is
+	  a Power Management IC. This driver provides common support for
+	  accessing the device; additional drivers must be enabled in order
+	  to use the functionality of the device.
+
 config MFD_MAX8925
 	bool "Maxim Semiconductor MAX8925 PMIC Support"
 	depends on I2C=y && GENERIC_HARDIRQS
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 79dd22d..2a4108d 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_MFD_DA9052_I2C)	+= da9052-i2c.o
 
 obj-$(CONFIG_MFD_MAX77686)	+= max77686.o max77686-irq.o
 obj-$(CONFIG_MFD_MAX77693)	+= max77693.o max77693-irq.o
+obj-$(CONFIG_MFD_MAX8907)	+= max8907.o
 max8925-objs			:= max8925-core.o max8925-i2c.o
 obj-$(CONFIG_MFD_MAX8925)	+= max8925.o
 obj-$(CONFIG_MFD_MAX8997)	+= max8997.o max8997-irq.o
diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c
new file mode 100644
index 0000000..5295276
--- /dev/null
+++ b/drivers/mfd/max8907.c
@@ -0,0 +1,331 @@
+/*
+ * max8907.c - mfd driver for MAX8907
+ *
+ * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@...im-ic.com>
+ * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max8907.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+static struct mfd_cell max8907_cells[] = {
+	{ .name = "max8907-regulator", },
+	{ .name = "max8907-rtc", },
+};
+
+static bool max8907_gen_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX8907_REG_ON_OFF_IRQ1:
+	case MAX8907_REG_ON_OFF_STAT:
+	case MAX8907_REG_ON_OFF_IRQ2:
+	case MAX8907_REG_CHG_IRQ1:
+	case MAX8907_REG_CHG_IRQ2:
+	case MAX8907_REG_CHG_STAT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool max8907_gen_is_precious_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX8907_REG_ON_OFF_IRQ1:
+	case MAX8907_REG_ON_OFF_IRQ2:
+	case MAX8907_REG_CHG_IRQ1:
+	case MAX8907_REG_CHG_IRQ2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool max8907_gen_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	return !max8907_gen_is_volatile_reg(dev, reg);
+}
+
+static const struct regmap_config max8907_regmap_gen_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = max8907_gen_is_volatile_reg,
+	.precious_reg = max8907_gen_is_precious_reg,
+	.writeable_reg = max8907_gen_is_writeable_reg,
+	.max_register = MAX8907_REG_LDO20VOUT,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static bool max8907_rtc_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	if (reg <= MAX8907_REG_RTC_YEAR2)
+		return true;
+
+	switch (reg) {
+	case MAX8907_REG_RTC_STATUS:
+	case MAX8907_REG_RTC_IRQ:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool max8907_rtc_is_precious_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX8907_REG_RTC_IRQ:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool max8907_rtc_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX8907_REG_RTC_STATUS:
+	case MAX8907_REG_RTC_IRQ:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_config max8907_regmap_rtc_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = max8907_rtc_is_volatile_reg,
+	.precious_reg = max8907_rtc_is_precious_reg,
+	.writeable_reg = max8907_rtc_is_writeable_reg,
+	.max_register = MAX8907_REG_MPL_CNTL,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static const struct regmap_irq max8907_chg_irqs[] = {
+	{ .reg_offset = 0, .mask = 1 << 0, },
+	{ .reg_offset = 0, .mask = 1 << 1, },
+	{ .reg_offset = 0, .mask = 1 << 2, },
+	{ .reg_offset = 1, .mask = 1 << 0, },
+	{ .reg_offset = 1, .mask = 1 << 1, },
+	{ .reg_offset = 1, .mask = 1 << 2, },
+	{ .reg_offset = 1, .mask = 1 << 3, },
+	{ .reg_offset = 1, .mask = 1 << 4, },
+	{ .reg_offset = 1, .mask = 1 << 5, },
+	{ .reg_offset = 1, .mask = 1 << 6, },
+	{ .reg_offset = 1, .mask = 1 << 7, },
+};
+
+static const struct regmap_irq_chip max8907_chg_irq_chip = {
+	.name = "max8907 chg",
+	.status_base = MAX8907_REG_CHG_IRQ1,
+	.mask_base = MAX8907_REG_CHG_IRQ1_MASK,
+	.wake_base = MAX8907_REG_CHG_IRQ1_MASK,
+	.irq_reg_stride = MAX8907_REG_CHG_IRQ2 - MAX8907_REG_CHG_IRQ1,
+	.num_regs = 2,
+	.irqs = max8907_chg_irqs,
+	.num_irqs = ARRAY_SIZE(max8907_chg_irqs),
+};
+
+static const struct regmap_irq max8907_on_off_irqs[] = {
+	{ .reg_offset = 0, .mask = 1 << 0, },
+	{ .reg_offset = 0, .mask = 1 << 1, },
+	{ .reg_offset = 0, .mask = 1 << 2, },
+	{ .reg_offset = 0, .mask = 1 << 3, },
+	{ .reg_offset = 0, .mask = 1 << 4, },
+	{ .reg_offset = 0, .mask = 1 << 5, },
+	{ .reg_offset = 0, .mask = 1 << 6, },
+	{ .reg_offset = 0, .mask = 1 << 7, },
+	{ .reg_offset = 1, .mask = 1 << 0, },
+	{ .reg_offset = 1, .mask = 1 << 1, },
+};
+
+static const struct regmap_irq_chip max8907_on_off_irq_chip = {
+	.name = "max8907 on_off",
+	.status_base = MAX8907_REG_ON_OFF_IRQ1,
+	.mask_base = MAX8907_REG_ON_OFF_IRQ1_MASK,
+	.irq_reg_stride = MAX8907_REG_ON_OFF_IRQ2 - MAX8907_REG_ON_OFF_IRQ1,
+	.num_regs = 2,
+	.irqs = max8907_on_off_irqs,
+	.num_irqs = ARRAY_SIZE(max8907_on_off_irqs),
+};
+
+static const struct regmap_irq max8907_rtc_irqs[] = {
+	{ .reg_offset = 0, .mask = 1 << 2, },
+	{ .reg_offset = 0, .mask = 1 << 3, },
+};
+
+static const struct regmap_irq_chip max8907_rtc_irq_chip = {
+	.name = "max8907 rtc",
+	.status_base = MAX8907_REG_RTC_IRQ,
+	.mask_base = MAX8907_REG_RTC_IRQ_MASK,
+	.num_regs = 1,
+	.irqs = max8907_rtc_irqs,
+	.num_irqs = ARRAY_SIZE(max8907_rtc_irqs),
+};
+
+static __devinit int max8907_i2c_probe(struct i2c_client *i2c,
+				       const struct i2c_device_id *id)
+{
+	struct max8907 *max8907;
+	int ret;
+
+	max8907 = devm_kzalloc(&i2c->dev, sizeof(struct max8907), GFP_KERNEL);
+	if (!max8907) {
+		ret = -ENOMEM;
+		goto err_alloc_drvdata;
+	}
+
+	max8907->dev = &i2c->dev;
+	dev_set_drvdata(max8907->dev, max8907);
+
+	max8907->i2c_gen = i2c;
+	i2c_set_clientdata(i2c, max8907);
+	max8907->regmap_gen = devm_regmap_init_i2c(i2c,
+						&max8907_regmap_gen_config);
+	if (IS_ERR(max8907->regmap_gen)) {
+		ret = PTR_ERR(max8907->regmap_gen);
+		dev_err(&i2c->dev, "gen regmap init failed: %d\n", ret);
+		goto err_regmap_gen;
+	}
+
+	max8907->i2c_rtc = i2c_new_dummy(i2c->adapter, MAX8907_RTC_I2C_ADDR);
+	if (!max8907->i2c_rtc) {
+		ret = -ENOMEM;
+		goto err_dummy_rtc;
+	}
+	i2c_set_clientdata(max8907->i2c_rtc, max8907);
+	max8907->regmap_rtc = devm_regmap_init_i2c(max8907->i2c_rtc,
+						&max8907_regmap_rtc_config);
+	if (IS_ERR(max8907->regmap_rtc)) {
+		ret = PTR_ERR(max8907->regmap_rtc);
+		dev_err(&i2c->dev, "rtc regmap init failed: %d\n", ret);
+		goto err_regmap_rtc;
+	}
+
+	irq_set_status_flags(max8907->i2c_gen->irq, IRQ_NOAUTOEN);
+
+	ret = regmap_add_irq_chip(max8907->regmap_gen, max8907->i2c_gen->irq,
+				  IRQF_ONESHOT | IRQF_SHARED, -1,
+				  &max8907_chg_irq_chip,
+				  &max8907->irqc_chg);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "failed to add chg irq chip: %d\n", ret);
+		goto err_irqc_chg;
+	}
+	ret = regmap_add_irq_chip(max8907->regmap_gen, max8907->i2c_gen->irq,
+				  IRQF_ONESHOT | IRQF_SHARED, -1,
+				  &max8907_on_off_irq_chip,
+				  &max8907->irqc_on_off);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "failed to add on off irq chip: %d\n", ret);
+		goto err_irqc_on_off;
+	}
+	ret = regmap_add_irq_chip(max8907->regmap_rtc, max8907->i2c_gen->irq,
+				  IRQF_ONESHOT | IRQF_SHARED, -1,
+				  &max8907_rtc_irq_chip,
+				  &max8907->irqc_rtc);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "failed to add rtc irq chip: %d\n", ret);
+		goto err_irqc_rtc;
+	}
+
+	enable_irq(max8907->i2c_gen->irq);
+
+	ret = mfd_add_devices(max8907->dev, -1, max8907_cells,
+			      ARRAY_SIZE(max8907_cells), NULL, 0);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "failed to add MFD devices %d\n", ret);
+		goto err_add_devices;
+	}
+
+	return 0;
+
+err_add_devices:
+	regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_rtc);
+err_irqc_rtc:
+	regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_on_off);
+err_irqc_on_off:
+	regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_chg);
+err_irqc_chg:
+err_regmap_rtc:
+	i2c_unregister_device(max8907->i2c_rtc);
+err_dummy_rtc:
+err_regmap_gen:
+err_alloc_drvdata:
+	return ret;
+}
+
+static __devexit int max8907_i2c_remove(struct i2c_client *i2c)
+{
+	struct max8907 *max8907 = i2c_get_clientdata(i2c);
+
+	mfd_remove_devices(max8907->dev);
+
+	regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_rtc);
+	regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_on_off);
+	regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_chg);
+
+	i2c_unregister_device(max8907->i2c_rtc);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id max8907_of_match[] = {
+	{ .compatible = "maxim,max8907" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, max8907_of_match);
+#endif
+
+static const struct i2c_device_id max8907_i2c_id[] = {
+	{"max8907", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max8907_i2c_id);
+
+static struct i2c_driver max8907_i2c_driver = {
+	.driver = {
+		.name = "max8907",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(max8907_of_match),
+	},
+	.probe = max8907_i2c_probe,
+	.remove = max8907_i2c_remove,
+	.id_table = max8907_i2c_id,
+};
+
+static int __init max8907_i2c_init(void)
+{
+	int ret = -ENODEV;
+
+	ret = i2c_add_driver(&max8907_i2c_driver);
+	if (ret != 0)
+		pr_err("Failed to register I2C driver: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(max8907_i2c_init);
+
+static void __exit max8907_i2c_exit(void)
+{
+	i2c_del_driver(&max8907_i2c_driver);
+}
+module_exit(max8907_i2c_exit);
+
+MODULE_DESCRIPTION("MAX8907 multi-function core driver");
+MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@...im-ic.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/max8907.h b/include/linux/mfd/max8907.h
new file mode 100644
index 0000000..283531f
--- /dev/null
+++ b/include/linux/mfd/max8907.h
@@ -0,0 +1,250 @@
+/*
+ * Functions to access MAX8907 power management chip.
+ *
+ * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@...im-ic.com>
+ * Copyright (C) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_MAX8907_H
+#define __LINUX_MFD_MAX8907_H
+
+#include <linux/mutex.h>
+#include <linux/pm.h>
+
+#define MAX8907_GEN_I2C_ADDR		(0x78 >> 1)
+#define MAX8907_ADC_I2C_ADDR		(0x8e >> 1)
+#define MAX8907_RTC_I2C_ADDR		(0xd0 >> 1)
+
+/* MAX8907 register map */
+#define MAX8907_REG_SYSENSEL		0x00
+#define MAX8907_REG_ON_OFF_IRQ1		0x01
+#define MAX8907_REG_ON_OFF_IRQ1_MASK	0x02
+#define MAX8907_REG_ON_OFF_STAT		0x03
+#define MAX8907_REG_SDCTL1		0x04
+#define MAX8907_REG_SDSEQCNT1		0x05
+#define MAX8907_REG_SDV1		0x06
+#define MAX8907_REG_SDCTL2		0x07
+#define MAX8907_REG_SDSEQCNT2		0x08
+#define MAX8907_REG_SDV2		0x09
+#define MAX8907_REG_SDCTL3		0x0A
+#define MAX8907_REG_SDSEQCNT3		0x0B
+#define MAX8907_REG_SDV3		0x0C
+#define MAX8907_REG_ON_OFF_IRQ2		0x0D
+#define MAX8907_REG_ON_OFF_IRQ2_MASK	0x0E
+#define MAX8907_REG_RESET_CNFG		0x0F
+#define MAX8907_REG_LDOCTL16		0x10
+#define MAX8907_REG_LDOSEQCNT16		0x11
+#define MAX8907_REG_LDO16VOUT		0x12
+#define MAX8907_REG_SDBYSEQCNT		0x13
+#define MAX8907_REG_LDOCTL17		0x14
+#define MAX8907_REG_LDOSEQCNT17		0x15
+#define MAX8907_REG_LDO17VOUT		0x16
+#define MAX8907_REG_LDOCTL1		0x18
+#define MAX8907_REG_LDOSEQCNT1		0x19
+#define MAX8907_REG_LDO1VOUT		0x1A
+#define MAX8907_REG_LDOCTL2		0x1C
+#define MAX8907_REG_LDOSEQCNT2		0x1D
+#define MAX8907_REG_LDO2VOUT		0x1E
+#define MAX8907_REG_LDOCTL3		0x20
+#define MAX8907_REG_LDOSEQCNT3		0x21
+#define MAX8907_REG_LDO3VOUT		0x22
+#define MAX8907_REG_LDOCTL4		0x24
+#define MAX8907_REG_LDOSEQCNT4		0x25
+#define MAX8907_REG_LDO4VOUT		0x26
+#define MAX8907_REG_LDOCTL5		0x28
+#define MAX8907_REG_LDOSEQCNT5		0x29
+#define MAX8907_REG_LDO5VOUT		0x2A
+#define MAX8907_REG_LDOCTL6		0x2C
+#define MAX8907_REG_LDOSEQCNT6		0x2D
+#define MAX8907_REG_LDO6VOUT		0x2E
+#define MAX8907_REG_LDOCTL7		0x30
+#define MAX8907_REG_LDOSEQCNT7		0x31
+#define MAX8907_REG_LDO7VOUT		0x32
+#define MAX8907_REG_LDOCTL8		0x34
+#define MAX8907_REG_LDOSEQCNT8		0x35
+#define MAX8907_REG_LDO8VOUT		0x36
+#define MAX8907_REG_LDOCTL9		0x38
+#define MAX8907_REG_LDOSEQCNT9		0x39
+#define MAX8907_REG_LDO9VOUT		0x3A
+#define MAX8907_REG_LDOCTL10		0x3C
+#define MAX8907_REG_LDOSEQCNT10		0x3D
+#define MAX8907_REG_LDO10VOUT		0x3E
+#define MAX8907_REG_LDOCTL11		0x40
+#define MAX8907_REG_LDOSEQCNT11		0x41
+#define MAX8907_REG_LDO11VOUT		0x42
+#define MAX8907_REG_LDOCTL12		0x44
+#define MAX8907_REG_LDOSEQCNT12		0x45
+#define MAX8907_REG_LDO12VOUT		0x46
+#define MAX8907_REG_LDOCTL13		0x48
+#define MAX8907_REG_LDOSEQCNT13		0x49
+#define MAX8907_REG_LDO13VOUT		0x4A
+#define MAX8907_REG_LDOCTL14		0x4C
+#define MAX8907_REG_LDOSEQCNT14		0x4D
+#define MAX8907_REG_LDO14VOUT		0x4E
+#define MAX8907_REG_LDOCTL15		0x50
+#define MAX8907_REG_LDOSEQCNT15		0x51
+#define MAX8907_REG_LDO15VOUT		0x52
+#define MAX8907_REG_OUT5VEN		0x54
+#define MAX8907_REG_OUT5VSEQ		0x55
+#define MAX8907_REG_OUT33VEN		0x58
+#define MAX8907_REG_OUT33VSEQ		0x59
+#define MAX8907_REG_LDOCTL19		0x5C
+#define MAX8907_REG_LDOSEQCNT19		0x5D
+#define MAX8907_REG_LDO19VOUT		0x5E
+#define MAX8907_REG_LBCNFG		0x60
+#define MAX8907_REG_SEQ1CNFG		0x64
+#define MAX8907_REG_SEQ2CNFG		0x65
+#define MAX8907_REG_SEQ3CNFG		0x66
+#define MAX8907_REG_SEQ4CNFG		0x67
+#define MAX8907_REG_SEQ5CNFG		0x68
+#define MAX8907_REG_SEQ6CNFG		0x69
+#define MAX8907_REG_SEQ7CNFG		0x6A
+#define MAX8907_REG_LDOCTL18		0x72
+#define MAX8907_REG_LDOSEQCNT18		0x73
+#define MAX8907_REG_LDO18VOUT		0x74
+#define MAX8907_REG_BBAT_CNFG		0x78
+#define MAX8907_REG_CHG_CNTL1		0x7C
+#define MAX8907_REG_CHG_CNTL2		0x7D
+#define MAX8907_REG_CHG_IRQ1		0x7E
+#define MAX8907_REG_CHG_IRQ2		0x7F
+#define MAX8907_REG_CHG_IRQ1_MASK	0x80
+#define MAX8907_REG_CHG_IRQ2_MASK	0x81
+#define MAX8907_REG_CHG_STAT		0x82
+#define MAX8907_REG_WLED_MODE_CNTL	0x84
+#define MAX8907_REG_ILED_CNTL		0x84
+#define MAX8907_REG_II1RR		0x8E
+#define MAX8907_REG_II2RR		0x8F
+#define MAX8907_REG_LDOCTL20		0x9C
+#define MAX8907_REG_LDOSEQCNT20		0x9D
+#define MAX8907_REG_LDO20VOUT		0x9E
+
+/* RTC register map */
+#define MAX8907_REG_RTC_SEC		0x00
+#define MAX8907_REG_RTC_MIN		0x01
+#define MAX8907_REG_RTC_HOURS		0x02
+#define MAX8907_REG_RTC_WEEKDAY		0x03
+#define MAX8907_REG_RTC_DATE		0x04
+#define MAX8907_REG_RTC_MONTH		0x05
+#define MAX8907_REG_RTC_YEAR1		0x06
+#define MAX8907_REG_RTC_YEAR2		0x07
+#define MAX8907_REG_ALARM0_SEC		0x08
+#define MAX8907_REG_ALARM0_MIN		0x09
+#define MAX8907_REG_ALARM0_HOURS	0x0A
+#define MAX8907_REG_ALARM0_WEEKDAY	0x0B
+#define MAX8907_REG_ALARM0_DATE		0x0C
+#define MAX8907_REG_ALARM0_MONTH	0x0D
+#define MAX8907_REG_ALARM0_YEAR1	0x0E
+#define MAX8907_REG_ALARM0_YEAR2	0x0F
+#define MAX8907_REG_ALARM1_SEC		0x10
+#define MAX8907_REG_ALARM1_MIN		0x11
+#define MAX8907_REG_ALARM1_HOURS	0x12
+#define MAX8907_REG_ALARM1_WEEKDAY	0x13
+#define MAX8907_REG_ALARM1_DATE		0x14
+#define MAX8907_REG_ALARM1_MONTH	0x15
+#define MAX8907_REG_ALARM1_YEAR1	0x16
+#define MAX8907_REG_ALARM1_YEAR2	0x17
+#define MAX8907_REG_ALARM0_CNTL		0x18
+#define MAX8907_REG_ALARM1_CNTL		0x19
+#define MAX8907_REG_RTC_STATUS		0x1A
+#define MAX8907_REG_RTC_CNTL		0x1B
+#define MAX8907_REG_RTC_IRQ		0x1C
+#define MAX8907_REG_RTC_IRQ_MASK	0x1D
+#define MAX8907_REG_MPL_CNTL		0x1E
+
+/* ADC and Touch Screen Controller register map */
+#define MAX8907_CTL			0
+#define MAX8907_SEQCNT			1
+#define MAX8907_VOUT			2
+
+/* mask bit fields */
+#define MAX8907_MASK_LDO_SEQ		0x1C
+#define MAX8907_MASK_LDO_EN		0x01
+#define MAX8907_MASK_VBBATTCV		0x03
+#define MAX8907_MASK_OUT5V_VINEN	0x10
+#define MAX8907_MASK_OUT5V_ENSRC	0x0E
+#define MAX8907_MASK_OUT5V_EN		0x01
+
+/* Regulator IDs */
+#define MAX8907_MBATT	0
+#define MAX8907_SD1	1
+#define MAX8907_SD2	2
+#define MAX8907_SD3	3
+#define MAX8907_LDO1	4
+#define MAX8907_LDO2	5
+#define MAX8907_LDO3	6
+#define MAX8907_LDO4	7
+#define MAX8907_LDO5	8
+#define MAX8907_LDO6	9
+#define MAX8907_LDO7	10
+#define MAX8907_LDO8	11
+#define MAX8907_LDO9	12
+#define MAX8907_LDO10	13
+#define MAX8907_LDO11	14
+#define MAX8907_LDO12	15
+#define MAX8907_LDO13	16
+#define MAX8907_LDO14	17
+#define MAX8907_LDO15	18
+#define MAX8907_LDO16	19
+#define MAX8907_LDO17	20
+#define MAX8907_LDO18	21
+#define MAX8907_LDO19	22
+#define MAX8907_LDO20	23
+#define MAX8907_OUT5V	24
+#define MAX8907_OUT33V	25
+#define MAX8907_BBAT	26
+#define MAX8907_SDBY	27
+#define MAX8907_VRTC	28
+#define MAX8907_NUM_REGULATORS (MAX8907_VRTC + 1)
+
+/* IRQ definitions */
+enum {
+	MAX8907_IRQ_VCHG_DC_OVP = 0,
+	MAX8907_IRQ_VCHG_DC_F,
+	MAX8907_IRQ_VCHG_DC_R,
+	MAX8907_IRQ_VCHG_THM_OK_R,
+	MAX8907_IRQ_VCHG_THM_OK_F,
+	MAX8907_IRQ_VCHG_MBATTLOW_F,
+	MAX8907_IRQ_VCHG_MBATTLOW_R,
+	MAX8907_IRQ_VCHG_RST,
+	MAX8907_IRQ_VCHG_DONE,
+	MAX8907_IRQ_VCHG_TOPOFF,
+	MAX8907_IRQ_VCHG_TMR_FAULT,
+
+	MAX8907_IRQ_GPM_RSTIN = 0,
+	MAX8907_IRQ_GPM_MPL,
+	MAX8907_IRQ_GPM_SW_3SEC,
+	MAX8907_IRQ_GPM_EXTON_F,
+	MAX8907_IRQ_GPM_EXTON_R,
+	MAX8907_IRQ_GPM_SW_1SEC,
+	MAX8907_IRQ_GPM_SW_F,
+	MAX8907_IRQ_GPM_SW_R,
+	MAX8907_IRQ_GPM_SYSCKEN_F,
+	MAX8907_IRQ_GPM_SYSCKEN_R,
+
+	MAX8907_IRQ_RTC_ALARM1 = 0,
+	MAX8907_IRQ_RTC_ALARM0,
+};
+
+struct max8907_platform_data {
+	struct regulator_init_data *init_data[MAX8907_NUM_REGULATORS];
+};
+
+struct regmap_irq_chips_data;
+
+struct max8907 {
+	struct device			*dev;
+	struct mutex			irq_lock;
+	struct i2c_client		*i2c_gen;
+	struct i2c_client		*i2c_rtc;
+	struct regmap			*regmap_gen;
+	struct regmap			*regmap_rtc;
+	struct regmap_irq_chip_data	*irqc_chg;
+	struct regmap_irq_chip_data	*irqc_on_off;
+	struct regmap_irq_chip_data	*irqc_rtc;
+};
+
+#endif
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists