| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 21 Aug 2012 15:16:07 +0300 From: Felipe Balbi <balbi@...com> To: alan@...ux.intel.com Cc: Tony Lindgren <tony@...mide.com>, Kevin Hilman <khilman@...com>, Linux OMAP Mailing List <linux-omap@...r.kernel.org>, Linux ARM Kernel Mailing List <linux-arm-kernel@...ts.infradead.org>, linux-serial@...r.kernel.org, Linux Kernel Mailing List <linux-kernel@...r.kernel.org>, Santosh Shilimkar <santosh.shilimkar@...com>, Shubhrajyoti Datta <shubhrajyoti@...com>, Felipe Balbi <balbi@...com> Subject: [PATCH v2 09/13] serial: omap: stick to put_autosuspend Everytime we're done using our TTY, we want the pm timer to be reinitilized. By sticking to pm_runtime_pm_autosuspend() we make sure that this will always be the case. The idea behind this patch is to make sure we will always reinitialize the pm timer so that we don't fall into a situation where pm_runtime_put() expires right away (if timer was already about to expire when we made the call to pm_runtime_put()). While suspending right away wouldn't cause any issues, reinitializing the pm timer can help us avoiding unnecessary context save & restore operations (which are somewhat expensive) if there's another read/write/set_termios request coming right after. IOW, we are trying to make sure UART is still powered up while it's still under heavy usage. Acked-by: Santosh Shilimkar <santosh.shilimkar@...com> Signed-off-by: Felipe Balbi <balbi@...com> --- drivers/tty/serial/omap-serial.c | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index bb63dc9..c272ecc 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -164,7 +164,8 @@ static void serial_omap_enable_ms(struct uart_port *port) pm_runtime_get_sync(up->dev); up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); - pm_runtime_put(up->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static void serial_omap_stop_tx(struct uart_port *port) @@ -415,7 +416,8 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port) spin_lock_irqsave(&up->port.lock, flags); ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; spin_unlock_irqrestore(&up->port.lock, flags); - pm_runtime_put(up->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); return ret; } @@ -427,7 +429,8 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port) pm_runtime_get_sync(up->dev); status = check_modem_status(up); - pm_runtime_put(up->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line); @@ -463,7 +466,8 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) up->mcr = serial_in(up, UART_MCR); up->mcr |= mcr; serial_out(up, UART_MCR, up->mcr); - pm_runtime_put(up->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static void serial_omap_break_ctl(struct uart_port *port, int break_state) @@ -480,7 +484,8 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) up->lcr &= ~UART_LCR_SBC; serial_out(up, UART_LCR, up->lcr); spin_unlock_irqrestore(&up->port.lock, flags); - pm_runtime_put(up->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static int serial_omap_startup(struct uart_port *port) @@ -578,7 +583,8 @@ static void serial_omap_shutdown(struct uart_port *port) if (serial_in(up, UART_LSR) & UART_LSR_DR) (void) serial_in(up, UART_RX); - pm_runtime_put(up->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); free_irq(up->port.irq, up); } @@ -849,7 +855,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_omap_configure_xonxoff(up, termios); spin_unlock_irqrestore(&up->port.lock, flags); - pm_runtime_put(up->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line); } @@ -880,7 +887,8 @@ serial_omap_pm(struct uart_port *port, unsigned int state, pm_runtime_allow(up->dev); } - pm_runtime_put(up->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static void serial_omap_release_port(struct uart_port *port) @@ -962,7 +970,8 @@ static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch) pm_runtime_get_sync(up->dev); wait_for_xmitr(up); serial_out(up, UART_TX, ch); - pm_runtime_put(up->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); } static int serial_omap_poll_get_char(struct uart_port *port) @@ -976,7 +985,8 @@ static int serial_omap_poll_get_char(struct uart_port *port) return NO_POLL_CHAR; status = serial_in(up, UART_RX); - pm_runtime_put(up->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); return status; } @@ -1308,7 +1318,8 @@ static int serial_omap_probe(struct platform_device *pdev) if (ret != 0) goto err_add_port; - pm_runtime_put(&pdev->dev); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); platform_set_drvdata(pdev, up); return 0; -- 1.7.12.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists