Date:	Tue, 21 Aug 2012 14:48:35 +0900
From:	Namjae Jeon <linkinjeon@...il.com>
To:	"J. Bruce Fields" <bfields@...ldses.org>
Cc:	Dave Chinner <david@...morbit.com>,
	Fengguang Wu <fengguang.wu@...el.com>,
	akpm@...ux-foundation.org, linux-kernel@...r.kernel.org,
	Namjae Jeon <namjae.jeon@...sung.com>,
	linux-fsdevel@...r.kernel.org, linux-nfs@...r.kernel.org
Subject: Re: [PATCH 3/3] writeback: add dirty_ratio_time per bdi variable (NFS
 write performance)

2012/8/21, J. Bruce Fields <bfields@...ldses.org>:
> On Mon, Aug 20, 2012 at 12:00:04PM +1000, Dave Chinner wrote:
>> On Sun, Aug 19, 2012 at 10:57:24AM +0800, Fengguang Wu wrote:
>> > On Sat, Aug 18, 2012 at 05:50:02AM -0400, Namjae Jeon wrote:
>> > > From: Namjae Jeon <namjae.jeon@...sung.com>
>> > >
>> > > This patch is based on suggestion by Wu Fengguang:
>> > > https://lkml.org/lkml/2011/8/19/19
>> > >
>> > > kernel has mechanism to do writeback as per dirty_ratio and
>> > > dirty_background
>> > > ratio. It also maintains per task dirty rate limit to keep balance of
>> > > dirty pages at any given instance by doing bdi bandwidth estimation.
>> > >
>> > > Kernel also has max_ratio/min_ratio tunables to specify percentage of
>> > > writecache
>> > > to control per bdi dirty limits and task throtelling.
>> > >
>> > > However, there might be a usecase where user wants a writeback tuning
>> > > parameter to flush dirty data at desired/tuned time interval.
>> > >
>> > > dirty_background_time provides an interface where user can tune
>> > > background
>> > > writeback start time using /sys/block/sda/bdi/dirty_background_time
>> > >
>> > > dirty_background_time is used alongwith average bdi write bandwidth
>> > > estimation
>> > > to start background writeback.
>> >
>> > Here lies my major concern about dirty_background_time: the write
>> > bandwidth estimation is an _estimation_ and will sure become wildly
>> > wrong in some cases. So the dirty_background_time implementation based
>> > on it will not always work to the user expectations.
>> >
>> > One important case is, some users (eg. Dave Chinner) explicitly take
>> > advantage of the existing behavior to quickly create & delete a big
>> > 1GB temp file without worrying about triggering unnecessary IOs.
>>
>> It's a fairly common use case - short term temp files are used by
>> lots of applications and avoiding writing them - especially on NFS -
>> is a big performance win. Forcing immediate writeback will
>> definitely cause unprdictable changes in performance for many
>> people...
>>
>> > > Results are:-
>> > > ==========================================================
>> > > Case:1 - Normal setup without any changes
>> > > ./performancetest_arm ./100MB write
>> > >
>> > >  RecSize  WriteSpeed   RanWriteSpeed
>> > >
>> > >  10485760  7.93MB/sec   8.11MB/sec
>> > >   1048576  8.21MB/sec   7.80MB/sec
>> > >    524288  8.71MB/sec   8.39MB/sec
>> > >    262144  8.91MB/sec   7.83MB/sec
>> > >    131072  8.91MB/sec   8.95MB/sec
>> > >     65536  8.95MB/sec   8.90MB/sec
>> > >     32768  8.76MB/sec   8.93MB/sec
>> > >     16384  8.78MB/sec   8.67MB/sec
>> > >      8192  8.90MB/sec   8.52MB/sec
>> > >      4096  8.89MB/sec   8.28MB/sec
>> > >
>> > > Average speed is near 8MB/seconds.
>> > >
>> > > Case:2 - Modified the dirty_background_time
>> > > ./performancetest_arm ./100MB write
>> > >
>> > >  RecSize  WriteSpeed   RanWriteSpeed
>> > >
>> > >  10485760  10.56MB/sec  10.37MB/sec
>> > >   1048576  10.43MB/sec  10.33MB/sec
>> > >    524288  10.32MB/sec  10.02MB/sec
>> > >    262144  10.52MB/sec  10.19MB/sec
>> > >    131072  10.34MB/sec  10.07MB/sec
>> > >     65536  10.31MB/sec  10.06MB/sec
>> > >     32768  10.27MB/sec  10.24MB/sec
>> > >     16384  10.54MB/sec  10.03MB/sec
>> > >      8192  10.41MB/sec  10.38MB/sec
>> > >      4096  10.34MB/sec  10.12MB/sec
>> > >
>> > > we can see, average write speed is increased to ~10-11MB/sec.
>> > > ============================================================
>> >
>> > The numbers are impressive!
>>
>> All it shows is that avoiding the writeback delay writes a file a
>> bit faster. i.e. 5s delay + 10s @ 10MB/s vs no delay and 10s
>> @10MB/s. That's pretty obvious, really, and people have been trying
>> to make this "optimisation" for NFS clients for years in the
>> misguided belief that short-cutting writeback caching is beneficial
>> to application performance.
>>
>> What these numbers don't show that is whether over-the-wire
>> writeback speed has improved at all. Or what happens when you have a
>> network that is faster than the server disk, or even faster than the
>> client can write into memory? What about when there are multiple
>> threads, or the network is congested, or the server overloaded? In
>> those cases the performance differential will disappear and
>> there's a good chance that the existing code will be significantly
>> faster because it places less imediate load on the server and
>> network.D...
>>
>> If you need immediate dispatch of your data for single threaded
>> performance then sync_file_range() is your friend.
>>
>> > FYI, I tried another NFS specific approach
>> > to avoid big NFS COMMITs, which achieved similar performance gains:
>> >
>> > nfs: writeback pages wait queue
>> > https://lkml.org/lkml/2011/10/20/235
>>
>> Which is basically controlling the server IO latency when commits
>> occur - smaller ranges mean the commit (fsync) is faster, and more
>> frequent commits mean the data goes to disk sooner. This is
>> something that will have a positive impact on writeback speeds
>> because it modifies the NFs client writeback behaviour to be more
>> server friendly and not stall over the wire. i.e. improving NFS
>> writeback performance is all about keeping the wire full and the
>> server happy, not about reducing the writeback delay before we start
>> writing over the wire.
>
> Wait, aren't we confusing client and server side here?
>
> If I read Namjae Jeon's post correctly, I understood that it was the
> *server* side he was modifying to start writeout sooner, to improve
> response time to eventual expected commits from the client.  The
> responses above all seem to be about the client.
>
> Maybe it's all the same at some level, but: naively, starting writeout
> early would seem a better bet on the server side.  By the time we get
> writes, the client has already decided they're worth sending to disk.
Hi Bruce.

Yes, right, I have not changed writeback setting on NFS client, It was
changed on NFS Server.
So writeback behaviour on NFS client will work at default. So There
will be no change in data caching behaviour
at NFS client. It will reduce server side wait time for NFS COMMIT by
starting early writeback.
>
> And changes to make clients and applications friendlier to the server
> are great, but we don't always have that option--there are more clients
> out there than servers and the latter may be easier to upgrade than the
> former.
I agree about your opinion..

Thanks.
>
> --b.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists