[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20120823073203.GH10057@shlinux2.ap.freescale.net>
Date: Thu, 23 Aug 2012 15:32:04 +0800
From: Dong Aisheng <b29396@...escale.com>
To: Stephen Warren <swarren@...dotorg.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linus.walleij@...ricsson.com" <linus.walleij@...ricsson.com>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"shawn.guo@...aro.org" <shawn.guo@...aro.org>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"grant.likely@...retlab.ca" <grant.likely@...retlab.ca>,
"rob.herring@...xeda.com" <rob.herring@...xeda.com>,
"sameo@...ux.intel.com" <sameo@...ux.intel.com>,
"lrg@...com" <lrg@...com>,
"broonie@...nsource.wolfsonmicro.com"
<broonie@...nsource.wolfsonmicro.com>,
Zhao Richard-B20223 <B20223@...escale.com>,
"devicetree-discuss@...ts.ozlabs.org"
<devicetree-discuss@...ts.ozlabs.org>,
"paul.liu@...aro.org" <paul.liu@...aro.org>
Subject: Re: [PATCH 4/7] regulator: anatop-regulator: convert to use
imx-syscon to access anatop register
On Thu, Aug 23, 2012 at 01:21:03PM +0800, Stephen Warren wrote:
> On 08/22/2012 01:18 AM, Dong Aisheng wrote:
> > Signed-off-by: Dong Aisheng <dong.aisheng@...aro.org>
>
> > diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
>
> > @@ -109,7 +110,11 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
> > rdesc->ops = &anatop_rops;
> > rdesc->type = REGULATOR_VOLTAGE;
> > rdesc->owner = THIS_MODULE;
> > - sreg->mfd = anatopmfd;
> > +
> > + sreg->anatop = of_parse_phandle(np, "fsl,anatop", 0);
> > + if (!sreg->anatop)
> > + return -ENODEV;
>
> In fact, that imx_syscon_lookup function I proposed could even do the
> of_parse_phandle() internally, so perhaps:
>
> foo->syscon_dev = imx_syscon_lookup(np, "fsl,anatop", 0);
> if (IS_ERR(foo->syscon_dev))
> return PTR_ERR(foo->syscon_dev);
>
> with imx_syscon_lookup() internally knowing when to return EPROBE_DEFER
> rather than any other permanent error code (e.g. for missing property,
> bad phandle, etc.)
>
This also looks reasonable to me.
btw, see my last reply to mark in another mail.
I'm not sure but Mark may want something slightly different as this one,
imx_syscon_lookup directly return regmap rather than dev, then we do not
need implement any register read/write API in imx-syscon driver, just
using the exist regmap r/w API is ok.
Regards
Dong Aisheng
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists