| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <503BA2DB.9080704@gmail.com> Date: Mon, 27 Aug 2012 18:39:55 +0200 From: Arvydas Sidorenko <asido4@...il.com> To: Jeff Garzik <jgarzik@...ox.com> CC: linux-kernel@...r.kernel.org, IDE/ATA development list <linux-ide@...r.kernel.org> Subject: Re: Storage related regression in linux-next 20120824 > Can you pastebin 'dmesg' and 'lspci'? Did this occur only once, or is > it reproducible? > > Jeff It does happen every time when booting into -next 20120824. #lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Universal Host Controller #5 (rev 05) 00:1a.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Universal Host Controller #1 (rev 05) 00:1d.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet PCIe (rev 10) 02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10) 03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev 02) 04:00.0 PCI bridge: Texas Instruments XIO2213A/B/XIO2221 PCI Express to PCI Bridge [Cheetah Express] (rev 01) 05:00.0 FireWire (IEEE 1394): Texas Instruments XIO2213A/B/XIO2221 IEEE-1394b OHCI Controller [Cheetah Express] (rev 01) #dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-rc3-next-20120824 (asido@...cker) (gcc version 4.6.3 (Gentoo 4.6.3 p1.5, pie-0.5.2) ) #9 SMP Sun Aug 26 15:54:31 CEST 2012 [ 0.000000] Command line: root=/dev/sda4 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000008ad33fff] usable [ 0.000000] BIOS-e820: [mem 0x000000008ad34000-0x000000008ad5efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008ad5f000-0x000000008afa1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000008afa2000-0x000000008affefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Apple Inc. Macmini5,1/Mac-8ED6AF5B48C039E1, BIOS MM51.88Z.0077.B0F.1110201309 10/20/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x26fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 0A0000000 mask FE0000000 uncachable [ 0.000000] 2 base 090000000 mask FF0000000 uncachable [ 0.000000] 3 base 08C000000 mask FFC000000 uncachable [ 0.000000] 4 base 08B800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x8ad34 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x8ad33fff] [ 0.000000] [mem 0x00000000-0x8abfffff] page 2M [ 0.000000] [mem 0x8ac00000-0x8ad33fff] page 4k [ 0.000000] kernel direct mapping tables up to 0x8ad33fff @ [mem 0x1fba5000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x26fdfffff] [ 0.000000] [mem 0x100000000-0x26fdfffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x26fdfffff @ [mem 0x8ad29000-0x8ad33fff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE ) [ 0.000000] ACPI: XSDT 000000008ad8e1c0 000B4 (v01 APPLE Apple00 00000060 01000013) [ 0.000000] ACPI: FACP 000000008ad8c000 000F4 (v04 APPLE Apple00 00000060 Loki 0000005F) [ 0.000000] ACPI: DSDT 000000008ad81000 0500C (v01 APPLE Macmini 00050001 INTL 20100915) [ 0.000000] ACPI: FACS 000000008ad3e000 00040 [ 0.000000] ACPI: HPET 000000008ad8b000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: APIC 000000008ad8a000 000BC (v02 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SBST 000000008ad88000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ECDT 000000008ad87000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SSDT 000000008ad7d000 00024 (v01 APPLE SmcDppt 00001000 INTL 20100915) [ 0.000000] ACPI: SSDT 000000008ad7a000 00643 (v01 APPLE UsbNoRmh 00001000 INTL 20100915) [ 0.000000] ACPI: SSDT 000000008ad78000 0013F (v01 APPLE SataPrt1 00001000 INTL 20100915) [ 0.000000] ACPI: SSDT 000000008ad77000 00159 (v02 APPLE IGHda 00001000 INTL 20100915) [ 0.000000] ACPI: SSDT 000000008ad73000 01580 (v02 APPLE SsdtIGPU 00001000 INTL 20100915) [ 0.000000] ACPI: SSDT 000000008ad72000 0060E (v01 PmRef Cpu0Ist 00003000 INTL 20100915) [ 0.000000] ACPI: SSDT 000000008ad71000 009B1 (v01 PmRef CpuPm 00003000 INTL 20100915) [ 0.000000] ACPI: SSDT 000000008ad70000 00315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915) [ 0.000000] ACPI: SSDT 000000008ad6f000 0037A (v01 PmRef ApTst 00003000 INTL 20100915) [ 0.000000] ACPI: MCFG 000000008ad89000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SSDT 000000008ad80000 000FA (v01 SataRe SataPri 00001000 INTL 20100915) [ 0.000000] ACPI: SSDT 000000008ad7f000 000FA (v01 SataRe SataSec 00001000 INTL 20100915) [ 0.000000] ACPI: SSDT 000000008ad7e000 00032 (v01 Apple SsdtS3 00001000 INTL 20100915) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x26fdfffff] [ 0.000000] NODE_DATA [mem 0x26fdfc000-0x26fdfffff] [ 0.000000] [ffffea0000000000-ffffea0009bfffff] PMD -> [ffff880267400000-ffff88026f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x26fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0008efff] [ 0.000000] node 0: [mem 0x00090000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0x8ad33fff] [ 0.000000] node 0: [mem 0x100000000-0x26fdfffff] [ 0.000000] On node 0 totalpages: 2074306 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 547188 pages, LIFO batch:31 [ 0.000000] Normal zone: 23544 pages used for memmap [ 0.000000] Normal zone: 1483272 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: 8 Processors exceeds NR_CPUS limit of 4 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 000000008ad34000 - 000000008ad5f000 [ 0.000000] PM: Registered nosave memory: 000000008ad5f000 - 000000008afa2000 [ 0.000000] PM: Registered nosave memory: 000000008afa2000 - 000000008afff000 [ 0.000000] PM: Registered nosave memory: 000000008afff000 - 000000008b000000 [ 0.000000] PM: Registered nosave memory: 000000008b000000 - 000000008fa00000 [ 0.000000] PM: Registered nosave memory: 000000008fa00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000 [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] e820: [mem 0x8fa00000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88026fa00000 s78272 r8192 d24128 u524288 [ 0.000000] pcpu-alloc: s78272 r8192 d24128 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2034372 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8084852k/10221568k available (7059k kernel code, 1924344k absent, 212372k reserved, 5915k data, 600k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2294.757 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.51 BogoMIPS (lpj=2294757) [ 0.000152] pid_max: default: 32768 minimum: 301 [ 0.000246] Security Framework initialized [ 0.000319] SELinux: Initializing. [ 0.000396] SELinux: Starting in permissive mode [ 0.000848] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002653] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003478] Mount-cache hash table entries: 256 [ 0.003706] Initializing cgroup subsys cpuacct [ 0.003780] Initializing cgroup subsys freezer [ 0.003871] CPU: Physical Processor ID: 0 [ 0.003944] CPU: Processor Core ID: 0 [ 0.004020] mce: CPU supports 7 MCE banks [ 0.004102] CPU0: Thermal monitoring enabled (TM1) [ 0.004180] process: using mwait in idle threads [ 0.004266] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.004266] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.004266] tlb_flushall_shift: 5 [ 0.004526] Freeing SMP alternatives: 24k freed [ 0.004606] ACPI: Core revision 20120711 [ 0.010917] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.021489] smpboot: CPU0: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz stepping 07 [ 0.123160] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.123429] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.123535] ... version: 3 [ 0.123607] ... bit width: 48 [ 0.123680] ... generic registers: 4 [ 0.123752] ... value mask: 0000ffffffffffff [ 0.123827] ... max period: 000000007fffffff [ 0.123902] ... fixed-purpose events: 3 [ 0.123975] ... event mask: 000000070000000f [ 0.124217] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.164119] Brought up 4 CPUs [ 0.164196] smpboot: Total of 4 processors activated (18358.05 BogoMIPS) [ 0.167186] devtmpfs: initialized [ 0.167382] PM: Registering ACPI NVS region [mem 0x8ad34000-0x8ad5efff] (176128 bytes) [ 0.167533] RTC time: 16:13:27, date: 08/27/12 [ 0.167640] NET: Registered protocol family 16 [ 0.167774] kworker/u:0 (28) used greatest stack depth: 6536 bytes left [ 0.167856] kworker/u:0 (29) used greatest stack depth: 5544 bytes left [ 0.168081] ACPI: bus type pci registered [ 0.168236] PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem 0xe0000000-0xe9cfffff] (base 0xe0000000) [ 0.168345] PCI: MMCONFIG at [mem 0xe0000000-0xe9cfffff] reserved in E820 [ 0.184749] PCI: Using configuration type 1 for base access [ 0.190640] bio: create slab <bio-0> at 0 [ 0.190938] ACPI: Added _OSI(Module Device) [ 0.191013] ACPI: Added _OSI(Processor Device) [ 0.191087] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.191165] ACPI: Added _OSI(Processor Aggregator Device) [ 0.192359] ACPI: EC: EC description table is found, configuring boot EC [ 0.196071] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.195270] ACPI: SSDT 000000008ad39190 00781 (v01 PmRef Cpu0Cst 00003001 INTL 20100915) [ 2.195742] ACPI: Dynamic OEM Table Load: [ 2.195897] ACPI: SSDT (null) 00781 (v01 PmRef Cpu0Cst 00003001 INTL 20100915) [ 2.201116] ACPI: SSDT 000000008ad3a710 003A4 (v01 PmRef ApIst 00003000 INTL 20100915) [ 2.201625] ACPI: Dynamic OEM Table Load: [ 2.201776] ACPI: SSDT (null) 003A4 (v01 PmRef ApIst 00003000 INTL 20100915) [ 2.205988] ACPI: SSDT 000000008ad38d90 00119 (v01 PmRef ApCst 00003000 INTL 20100915) [ 2.206454] ACPI: Dynamic OEM Table Load: [ 2.206606] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100915) [ 2.211315] ACPI: Interpreter enabled [ 2.211390] ACPI: (supports S0 S3 S4 S5) [ 2.211635] ACPI: Using IOAPIC for interrupt routing [ 2.219475] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 2.219707] ACPI: No dock devices found. [ 2.219781] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.220163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.220678] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9c] only partially covers this bridge [ 2.220829] PCI host bridge to bus 0000:00 [ 2.220905] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 2.220907] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.220983] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 2.221061] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.221138] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.221216] pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff] [ 2.221294] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 2.221379] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 2.221416] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 2.221447] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.221459] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400 [ 2.221488] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 2.221505] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 2.221515] pci 0000:00:02.0: reg 10: [mem 0xa0000000-0xa03fffff 64bit] [ 2.221521] pci 0000:00:02.0: reg 18: [mem 0x90000000-0x9fffffff 64bit pref] [ 2.221525] pci 0000:00:02.0: reg 20: [io 0x2000-0x203f] [ 2.221579] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 2.221601] pci 0000:00:16.0: reg 10: [mem 0xa0907100-0xa090710f 64bit] [ 2.221680] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.221708] pci 0000:00:1a.0: [8086:1c2c] type 00 class 0x0c0300 [ 2.221751] pci 0000:00:1a.0: reg 20: [io 0x2120-0x213f] [ 2.221817] pci 0000:00:1a.7: [8086:1c2d] type 00 class 0x0c0320 [ 2.221837] pci 0000:00:1a.7: reg 10: [mem 0xa0906c00-0xa0906fff] [ 2.221928] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 2.221956] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 2.221970] pci 0000:00:1b.0: reg 10: [mem 0xa0900000-0xa0903fff 64bit] [ 2.222041] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.222064] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 2.222144] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.222169] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 2.222249] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.222273] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 2.222353] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 2.222383] pci 0000:00:1d.0: [8086:1c27] type 00 class 0x0c0300 [ 2.222430] pci 0000:00:1d.0: reg 20: [io 0x20c0-0x20df] [ 2.222504] pci 0000:00:1d.7: [8086:1c26] type 00 class 0x0c0320 [ 2.222525] pci 0000:00:1d.7: reg 10: [mem 0xa0906800-0xa0906bff] [ 2.222617] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.222643] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 2.222765] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f [ 2.222780] pci 0000:00:1f.2: reg 10: [io 0x2148-0x214f] [ 2.222788] pci 0000:00:1f.2: reg 14: [io 0x215c-0x215f] [ 2.222796] pci 0000:00:1f.2: reg 18: [io 0x2140-0x2147] [ 2.222808] pci 0000:00:1f.2: reg 1c: [io 0x2158-0x215b] [ 2.222816] pci 0000:00:1f.2: reg 20: [io 0x2060-0x206f] [ 2.222824] pci 0000:00:1f.2: reg 24: [io 0xffe0-0xffef] [ 2.222872] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 2.222888] pci 0000:00:1f.3: reg 10: [mem 0xa0907000-0xa09070ff 64bit] [ 2.222909] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 2.222959] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff] [ 2.222961] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.223040] pci 0000:00:01.0: bridge window [mem 0xa0800000-0xa08fffff] [ 2.223062] pci_bus 0000:06: busn_res: [bus 06-9c] is inserted under [bus 00-ff] [ 2.223065] pci 0000:00:01.1: PCI bridge to [bus 06-9c] [ 2.223140] pci 0000:00:01.1: bridge window [io 0x3000-0x3fff] [ 2.223142] pci 0000:00:01.1: bridge window [mem 0xa0a00000-0xa4efffff] [ 2.223145] pci 0000:00:01.1: bridge window [mem 0xa4f00000-0xa8efffff 64bit pref] [ 2.223188] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff] [ 2.223255] pci 0000:02:00.0: [14e4:16b4] type 00 class 0x020000 [ 2.223288] pci 0000:02:00.0: reg 10: [mem 0xa0400000-0xa040ffff 64bit pref] [ 2.223316] pci 0000:02:00.0: reg 18: [mem 0xa0410000-0xa041ffff 64bit pref] [ 2.223468] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 2.223540] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501 [ 2.223573] pci 0000:02:00.1: reg 10: [mem 0xa0420000-0xa042ffff 64bit pref] [ 2.223753] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 2.225875] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.225980] pci 0000:00:1c.0: bridge window [mem 0xa0700000-0xa07fffff] [ 2.225986] pci 0000:00:1c.0: bridge window [mem 0xa0400000-0xa04fffff 64bit pref] [ 2.226034] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff] [ 2.226103] pci 0000:03:00.0: [14e4:4331] type 00 class 0x028000 [ 2.226149] pci 0000:03:00.0: reg 10: [mem 0xa0600000-0xa0603fff 64bit] [ 2.226417] pci 0000:03:00.0: supports D1 D2 [ 2.226419] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 2.227841] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 2.227953] pci 0000:00:1c.1: bridge window [mem 0xa0600000-0xa06fffff] [ 2.228002] pci_bus 0000:04: busn_res: [bus 04-05] is inserted under [bus 00-ff] [ 2.228039] pci 0000:04:00.0: [104c:823e] type 01 class 0x060400 [ 2.228223] pci 0000:04:00.0: supports D1 D2 [ 2.229828] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 2.229945] pci 0000:00:1c.2: bridge window [mem 0xa0500000-0xa05fffff] [ 2.230062] pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 04-05] [ 2.230086] pci 0000:05:00.0: [104c:823f] type 00 class 0x0c0010 [ 2.230119] pci 0000:05:00.0: reg 10: [mem 0xa0504000-0xa05047ff] [ 2.230140] pci 0000:05:00.0: reg 14: [mem 0xa0500000-0xa0503fff] [ 2.230297] pci 0000:05:00.0: supports D1 D2 [ 2.230299] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot [ 2.230399] pci 0000:04:00.0: PCI bridge to [bus 05] [ 2.230490] pci 0000:04:00.0: bridge window [mem 0xa0500000-0xa05fffff] [ 2.230532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.230614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 2.230646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] [ 2.230684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 2.230714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 2.230740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 2.230830] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 2.230974] pci0000:00: ACPI _OSC control (0x1d) granted [ 2.234433] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 2.235086] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 2.235673] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 2.236332] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 2.236920] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 2.237613] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 2.238263] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 2.238914] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 2.239591] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.239702] vgaarb: loaded [ 2.239773] vgaarb: bridge control possible 0000:00:02.0 [ 2.239950] SCSI subsystem initialized [ 2.240026] ACPI: bus type scsi registered [ 2.240170] libata version 3.00 loaded. [ 2.240255] ACPI: bus type usb registered [ 2.240375] usbcore: registered new interface driver usbfs [ 2.240477] usbcore: registered new interface driver hub [ 2.240583] usbcore: registered new device driver usb [ 2.240827] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 2.240905] PCI: Using ACPI for IRQ routing [ 2.242412] PCI: pci_cache_line_size set to 64 bytes [ 2.242581] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 2.242582] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 2.242584] e820: reserve RAM buffer [mem 0x8ad34000-0x8bffffff] [ 2.242586] e820: reserve RAM buffer [mem 0x26fe00000-0x26fffffff] [ 2.242804] cfg80211: Calling CRDA to update world regulatory domain [ 2.242916] NetLabel: Initializing [ 2.242991] NetLabel: domain hash size = 128 [ 2.243065] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.243156] NetLabel: unlabeled traffic allowed by default [ 2.243308] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.243744] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.245835] Switching to clocksource hpet [ 2.248152] pnp: PnP ACPI init [ 2.248232] ACPI: bus type pnp registered [ 2.248570] pnp 00:00: [bus 00-ff] [ 2.248573] pnp 00:00: [io 0x0000-0x0cf7 window] [ 2.248574] pnp 00:00: [io 0x0cf8-0x0cff] [ 2.248576] pnp 00:00: [io 0x0d00-0xffff window] [ 2.248578] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 2.248580] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 2.248581] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 2.248583] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 2.248584] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 2.248586] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 2.248587] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 2.248589] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 2.248591] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 2.248592] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 2.248594] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 2.248595] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 2.248597] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 2.248598] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 2.248600] pnp 00:00: [mem 0x8fa00000-0xfeafffff window] [ 2.248602] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 2.248683] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 2.248754] pnp 00:01: [io 0x0000-0x001f] [ 2.248756] pnp 00:01: [io 0x0081-0x0091] [ 2.248757] pnp 00:01: [io 0x0093-0x009f] [ 2.248758] pnp 00:01: [io 0x00c0-0x00df] [ 2.248760] pnp 00:01: [dma 4] [ 2.248811] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.248819] pnp 00:02: [mem 0xff000000-0xffffffff] [ 2.248864] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 2.248929] pnp 00:03: [irq 0 disabled] [ 2.248938] pnp 00:03: [irq 8] [ 2.248939] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 2.249002] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved [ 2.249081] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 2.249090] pnp 00:04: [io 0x00f0] [ 2.249095] pnp 00:04: [irq 13] [ 2.249144] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.249152] pnp 00:05: [io 0x002e-0x002f] [ 2.249154] pnp 00:05: [io 0x004e-0x004f] [ 2.249155] pnp 00:05: [io 0x0061] [ 2.249157] pnp 00:05: [io 0x0063] [ 2.249158] pnp 00:05: [io 0x0065] [ 2.249160] pnp 00:05: [io 0x0067] [ 2.249161] pnp 00:05: [io 0x0080] [ 2.249162] pnp 00:05: [io 0x0092] [ 2.249165] pnp 00:05: [io 0x00b2-0x00b3] [ 2.249167] pnp 00:05: [io 0x1000-0x100f] [ 2.249168] pnp 00:05: [io 0x0400-0x047f] [ 2.249170] pnp 00:05: [io 0x0500-0x057f] [ 2.249228] system 00:05: [io 0x1000-0x100f] has been reserved [ 2.249314] system 00:05: [io 0x0400-0x047f] has been reserved [ 2.249391] system 00:05: [io 0x0500-0x057f] has been reserved [ 2.249469] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.249476] pnp 00:06: [io 0x0070-0x0077] [ 2.249522] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.249531] pnp 00:07: [io 0x0300-0x031f] [ 2.249537] pnp 00:07: [irq 6] [ 2.249583] pnp 00:07: Plug and Play ACPI device, IDs APP0001 (active) [ 2.249593] pnp 00:08: [io 0x0700-0x07fe] [ 2.249644] pnp 00:08: Plug and Play ACPI device, IDs APP000b (active) [ 2.249763] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 2.249765] pnp 00:09: [mem 0xfed10000-0xfed17fff] [ 2.249767] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 2.249768] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 2.249770] pnp 00:09: [mem 0xe0000000-0xefffffff] [ 2.249771] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 2.249773] pnp 00:09: [mem 0xfed90000-0xfed93fff] [ 2.249774] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 2.249775] pnp 00:09: [mem 0xff000000-0xffffffff] [ 2.249777] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 2.249779] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled] [ 2.249843] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.249921] system 00:09: [mem 0xfed10000-0xfed17fff] could not be reserved [ 2.249999] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.250077] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.250155] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 2.250232] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.250318] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.250395] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.250473] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 2.250552] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.250630] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.250755] pnp 00:0a: [mem 0x20000000-0x201fffff] [ 2.250757] pnp 00:0a: [mem 0x40000000-0x401fffff] [ 2.250825] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved [ 2.250903] system 00:0a: [mem 0x40000000-0x401fffff] has been reserved [ 2.250981] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.250988] pnp: PnP ACPI: found 11 devices [ 2.251061] ACPI: ACPI bus type pnp unregistered [ 2.259213] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.259301] pci 0000:00:01.0: bridge window [mem 0xa0800000-0xa08fffff] [ 2.259381] pci 0000:00:01.1: PCI bridge to [bus 06-9c] [ 2.259457] pci 0000:00:01.1: bridge window [io 0x3000-0x3fff] [ 2.259534] pci 0000:00:01.1: bridge window [mem 0xa0a00000-0xa4efffff] [ 2.259614] pci 0000:00:01.1: bridge window [mem 0xa4f00000-0xa8efffff 64bit pref] [ 2.259721] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.259799] pci 0000:00:1c.0: bridge window [mem 0xa0700000-0xa07fffff] [ 2.259878] pci 0000:00:1c.0: bridge window [mem 0xa0400000-0xa04fffff 64bit pref] [ 2.259987] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 2.260065] pci 0000:00:1c.1: bridge window [mem 0xa0600000-0xa06fffff] [ 2.260151] pci 0000:04:00.0: PCI bridge to [bus 05] [ 2.260233] pci 0000:04:00.0: bridge window [mem 0xa0500000-0xa05fffff] [ 2.260332] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 2.260410] pci 0000:00:1c.2: bridge window [mem 0xa0500000-0xa05fffff] [ 2.260496] pci 0000:00:01.0: enabling device (0000 -> 0002) [ 2.260607] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.260609] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.260611] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.260613] pci_bus 0000:00: resource 7 [mem 0x8fa00000-0xfeafffff] [ 2.260614] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 2.260616] pci_bus 0000:01: resource 1 [mem 0xa0800000-0xa08fffff] [ 2.260618] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff] [ 2.260619] pci_bus 0000:06: resource 1 [mem 0xa0a00000-0xa4efffff] [ 2.260621] pci_bus 0000:06: resource 2 [mem 0xa4f00000-0xa8efffff 64bit pref] [ 2.260623] pci_bus 0000:02: resource 1 [mem 0xa0700000-0xa07fffff] [ 2.260625] pci_bus 0000:02: resource 2 [mem 0xa0400000-0xa04fffff 64bit pref] [ 2.260627] pci_bus 0000:03: resource 1 [mem 0xa0600000-0xa06fffff] [ 2.260629] pci_bus 0000:04: resource 1 [mem 0xa0500000-0xa05fffff] [ 2.260630] pci_bus 0000:05: resource 1 [mem 0xa0500000-0xa05fffff] [ 2.260655] NET: Registered protocol family 2 [ 2.261300] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.262626] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.262833] TCP: Hash tables configured (established 524288 bind 65536) [ 2.262923] TCP: reno registered [ 2.263003] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.263109] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.263273] NET: Registered protocol family 1 [ 2.263418] RPC: Registered named UNIX socket transport module. [ 2.263495] RPC: Registered udp transport module. [ 2.263569] RPC: Registered tcp transport module. [ 2.263643] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.263736] pci 0000:00:02.0: Boot video device [ 2.263760] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.263761] pci 0000:00:1a.0: Performing full reset [ 2.263935] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.263936] pci 0000:00:1d.0: Performing full reset [ 2.264160] PCI: CLS mismatch (256 != 64), using 64 bytes [ 2.264200] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.264294] software IO TLB [mem 0x86d29000-0x8ad28fff] (64MB) mapped at [ffff880086d29000-ffff88008ad28fff] [ 2.265018] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a [ 2.265098] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a [ 2.265179] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a [ 2.265265] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a [ 2.265396] microcode: Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter Oruba [ 2.265714] audit: initializing netlink socket (disabled) [ 2.265795] type=2000 audit(1346084009.161:1): initialized [ 2.286766] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.289578] VFS: Disk quotas dquot_6.5.2 [ 2.289713] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.290644] NFS: Registering the id_resolver key type [ 2.290727] Key type id_resolver registered [ 2.290800] Key type id_legacy registered [ 2.290937] msgmni has been set to 15790 [ 2.291083] SELinux: Registering netfilter hooks [ 2.291459] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.291565] io scheduler noop registered [ 2.292133] io scheduler deadline registered [ 2.292263] io scheduler cfq registered (default) [ 2.292437] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 2.292547] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X [ 2.292681] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X [ 2.292803] pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X [ 2.292929] pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X [ 2.293077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.293344] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.293453] ACPI: Power Button [PWRB] [ 2.293578] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 2.293686] ACPI: Sleep Button [SLPB] [ 2.293808] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.293914] ACPI: Power Button [PWRF] [ 2.294084] ACPI: Requesting acpi_cpufreq [ 2.296175] Monitor-Mwait will be used to enter C-1 state [ 2.296203] Monitor-Mwait will be used to enter C-2 state [ 2.296234] Monitor-Mwait will be used to enter C-3 state [ 2.296249] ACPI: acpi_idle registered with cpuidle [ 2.300198] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.300895] Non-volatile memory driver v1.3 [ 2.300971] Linux agpgart interface v0.103 [ 2.301174] [drm] Initialized drm 1.1.0 20060810 [ 2.302841] brd: module loaded [ 2.303781] loop: module loaded [ 2.304078] ata_piix 0000:00:1f.2: version 2.13 [ 2.304092] ata_piix 0000:00:1f.2: MAP [ [ 2.304165] P0 P2 P1 P3 ] [ 2.455212] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.455616] scsi0 : ata_piix [ 2.455862] scsi1 : ata_piix [ 2.456073] ata1: SATA max UDMA/133 cmd 0x2148 ctl 0x215c bmdma 0x2060 irq 19 [ 2.456164] ata2: SATA max UDMA/133 cmd 0x2140 ctl 0x2158 bmdma 0x2068 irq 19 [ 2.456433] tg3.c:v3.124 (March 21, 2012) [ 2.475283] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM957765) rev 57785100] (PCI Express) MAC address 3c:07:54:6f:0e:4c [ 2.475396] tg3 0000:02:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.475506] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.475612] tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 2.475844] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.475920] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.476031] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.476109] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.476230] sky2: driver version 1.30 [ 2.476537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.476615] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 2.476639] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.476642] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.476773] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.476883] ehci_hcd 0000:00:1a.7: reset hcs_params 0x203206 dbg=2 cc=3 pcc=2 ordered !ppc ports=6 [ 2.476886] ehci_hcd 0000:00:1a.7: reset hcc_params 36881 caching frame 1024 64 bit addr [ 2.476896] ehci_hcd 0000:00:1a.7: support lpm [ 2.476903] ehci_hcd 0000:00:1a.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT [ 2.480779] ehci_hcd 0000:00:1a.7: debug port 2 [ 2.480859] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 2.480860] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 2.480876] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xa0906c00 [ 2.480954] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 2.486147] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.486276] usb usb1: default language 0x0409 [ 2.486281] usb usb1: udev 1, busnum 1, minor = 0 [ 2.486283] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.486361] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.486466] usb usb1: Product: EHCI Host Controller [ 2.486541] usb usb1: Manufacturer: Linux 3.6.0-rc3-next-20120824 ehci_hcd [ 2.486619] usb usb1: SerialNumber: 0000:00:1a.7 [ 2.486781] usb usb1: usb_probe_device [ 2.486784] usb usb1: configuration #1 chosen from 1 choice [ 2.486790] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.486831] hub 1-0:1.0: usb_probe_interface [ 2.486833] hub 1-0:1.0: usb_probe_interface - got id [ 2.486835] hub 1-0:1.0: USB hub found [ 2.486909] hub 1-0:1.0: 6 ports detected [ 2.486983] hub 1-0:1.0: standalone hub [ 2.486985] hub 1-0:1.0: no power switching (usb 1.0) [ 2.486986] hub 1-0:1.0: individual port over-current protection [ 2.486987] hub 1-0:1.0: power on to power good time: 20ms [ 2.486990] hub 1-0:1.0: local power source is good [ 2.486992] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 2.487048] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.487051] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.487189] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.487299] ehci_hcd 0000:00:1d.7: reset hcs_params 0x204208 dbg=2 cc=4 pcc=2 ordered !ppc ports=8 [ 2.487302] ehci_hcd 0000:00:1d.7: reset hcc_params 36881 caching frame 1024 64 bit addr [ 2.487311] ehci_hcd 0000:00:1d.7: support lpm [ 2.487316] ehci_hcd 0000:00:1d.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT [ 2.491211] ehci_hcd 0000:00:1d.7: debug port 2 [ 2.491291] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 2.491293] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 2.491304] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xa0906800 [ 2.491383] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 2.497144] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.497272] usb usb2: default language 0x0409 [ 2.497277] usb usb2: udev 1, busnum 2, minor = 128 [ 2.497279] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.497357] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.497461] usb usb2: Product: EHCI Host Controller [ 2.497536] usb usb2: Manufacturer: Linux 3.6.0-rc3-next-20120824 ehci_hcd [ 2.497614] usb usb2: SerialNumber: 0000:00:1d.7 [ 2.497769] usb usb2: usb_probe_device [ 2.497771] usb usb2: configuration #1 chosen from 1 choice [ 2.497777] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.497816] hub 2-0:1.0: usb_probe_interface [ 2.497817] hub 2-0:1.0: usb_probe_interface - got id [ 2.497818] hub 2-0:1.0: USB hub found [ 2.497893] hub 2-0:1.0: 8 ports detected [ 2.497967] hub 2-0:1.0: standalone hub [ 2.497968] hub 2-0:1.0: no power switching (usb 1.0) [ 2.497969] hub 2-0:1.0: individual port over-current protection [ 2.497970] hub 2-0:1.0: power on to power good time: 20ms [ 2.497973] hub 2-0:1.0: local power source is good [ 2.497975] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.498049] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.498136] ohci_hcd: block sizes: ed 80 td 96 [ 2.498173] uhci_hcd: USB Universal Host Controller Interface driver [ 2.498271] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.498274] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.498402] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.498512] uhci_hcd 0000:00:1a.0: detected 2 ports [ 2.498589] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.498590] uhci_hcd 0000:00:1a.0: Performing full reset [ 2.498616] uhci_hcd 0000:00:1a.0: irq 21, io base 0x00002120 [ 2.498714] usb usb3: default language 0x0409 [ 2.498719] usb usb3: udev 1, busnum 3, minor = 256 [ 2.498721] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.498799] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.498903] usb usb3: Product: UHCI Host Controller [ 2.498978] usb usb3: Manufacturer: Linux 3.6.0-rc3-next-20120824 uhci_hcd [ 2.499056] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.499208] usb usb3: usb_probe_device [ 2.499210] usb usb3: configuration #1 chosen from 1 choice [ 2.499215] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 2.499254] hub 3-0:1.0: usb_probe_interface [ 2.499256] hub 3-0:1.0: usb_probe_interface - got id [ 2.499257] hub 3-0:1.0: USB hub found [ 2.499332] hub 3-0:1.0: 2 ports detected [ 2.499406] hub 3-0:1.0: standalone hub [ 2.499407] hub 3-0:1.0: no power switching (usb 1.0) [ 2.499408] hub 3-0:1.0: individual port over-current protection [ 2.499410] hub 3-0:1.0: power on to power good time: 2ms [ 2.499412] hub 3-0:1.0: local power source is good [ 2.499414] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 2.499437] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 2.499454] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.499457] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.499582] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 2.499692] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.499769] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.499770] uhci_hcd 0000:00:1d.0: Performing full reset [ 2.499787] uhci_hcd 0000:00:1d.0: irq 19, io base 0x000020c0 [ 2.499883] usb usb4: default language 0x0409 [ 2.499887] usb usb4: udev 1, busnum 4, minor = 384 [ 2.499889] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.499967] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.500072] usb usb4: Product: UHCI Host Controller [ 2.500166] usb usb4: Manufacturer: Linux 3.6.0-rc3-next-20120824 uhci_hcd [ 2.500245] usb usb4: SerialNumber: 0000:00:1d.0 [ 2.500388] usb usb4: usb_probe_device [ 2.500390] usb usb4: configuration #1 chosen from 1 choice [ 2.500394] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 2.500432] hub 4-0:1.0: usb_probe_interface [ 2.500433] hub 4-0:1.0: usb_probe_interface - got id [ 2.500435] hub 4-0:1.0: USB hub found [ 2.500510] hub 4-0:1.0: 2 ports detected [ 2.500583] hub 4-0:1.0: standalone hub [ 2.500584] hub 4-0:1.0: no power switching (usb 1.0) [ 2.500586] hub 4-0:1.0: individual port over-current protection [ 2.500587] hub 4-0:1.0: power on to power good time: 2ms [ 2.500590] hub 4-0:1.0: local power source is good [ 2.500591] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 2.500616] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 2.500653] Initializing USB Mass Storage driver... [ 2.500772] usbcore: registered new interface driver usb-storage [ 2.500848] USB Mass Storage support registered. [ 2.500966] usbcore: registered new interface driver libusual [ 2.501178] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.502142] i8042: No controller found [ 2.502267] mousedev: PS/2 mouse device common for all mice [ 2.502588] rtc_cmos 00:06: RTC can wake from S4 [ 2.502798] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.502901] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.503124] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@...hat.com [ 2.503331] cpuidle: using governor ladder [ 2.503470] cpuidle: using governor menu [ 2.503544] EFI Variables Facility v0.08 2004-May-17 [ 2.504494] usbcore: registered new interface driver usbhid [ 2.504570] usbhid: USB HID core driver [ 2.505257] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 2.586181] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.586198] hub 1-0:1.0: port 1: status 0501 change 0001 [ 2.597173] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.597189] hub 2-0:1.0: port 1: status 0501 change 0001 [ 2.599139] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 2.600131] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00 [ 2.686150] hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 2.686187] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 2.737352] ehci_hcd 0000:00:1a.7: port 1 reset complete, port enabled [ 2.737358] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.788081] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.839297] ehci_hcd 0000:00:1a.7: port 1 reset complete, port enabled [ 2.839304] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.902223] ehci_hcd 0000:00:1a.7: set dev address 2 for port 1 [ 2.902235] ehci_hcd 0000:00:1a.7: LPM: no device attached [ 2.902596] usb 1-1: udev 2, busnum 1, minor = 1 [ 2.902606] usb 1-1: New USB device found, idVendor=0424, idProduct=2513 [ 2.902710] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.903108] usb 1-1: usb_probe_device [ 2.903112] usb 1-1: configuration #1 chosen from 1 choice [ 2.903374] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 2.903623] hub 1-1:1.0: usb_probe_interface [ 2.903626] hub 1-1:1.0: usb_probe_interface - got id [ 2.903628] hub 1-1:1.0: USB hub found [ 2.903834] hub 1-1:1.0: 3 ports detected [ 2.903953] hub 1-1:1.0: compound device; port removable status: FRR [ 2.903955] hub 1-1:1.0: individual port power switching [ 2.903956] hub 1-1:1.0: individual port over-current protection [ 2.904125] hub 1-1:1.0: TT per port [ 2.904128] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.904130] hub 1-1:1.0: power on to power good time: 100ms [ 2.904424] hub 1-1:1.0: local power source is good [ 2.904430] hub 1-1:1.0: enabling power on all ports [ 2.904805] hub 2-0:1.0: state 7 ports 8 chg 0002 evt 0000 [ 2.904818] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 2.955112] ehci_hcd 0000:00:1d.7: port 1 reset complete, port enabled [ 2.955119] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 3.004169] hub 1-1:1.0: port 1: status 0101 change 0001 [ 3.005952] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 3.026624] Netfilter messages via NETLINK v0.30. [ 3.026711] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.026941] ctnetlink v0.93: registering with nfnetlink. [ 3.027111] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.027211] TCP: cubic registered [ 3.027283] Initializing XFRM netlink socket [ 3.027555] NET: Registered protocol family 10 [ 3.027765] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.027874] sit: IPv6 over IPv4 tunneling driver [ 3.028140] NET: Registered protocol family 17 [ 3.028230] Key type dns_resolver registered [ 3.028744] PM: Hibernation image not present or could not be loaded. [ 3.028753] registered taskstats version 1 [ 3.029428] Magic number: 8:905:237 [ 3.029546] console [netcon0] enabled [ 3.029618] netconsole: network logging started [ 3.030266] ALSA device list: [ 3.030338] #0: HDA Intel PCH at 0xa0900000 irq 45 [ 3.057058] ehci_hcd 0000:00:1d.7: port 1 reset complete, port enabled [ 3.057063] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 3.103927] usb 1-1: link qh256-0001/ffff8802650cf600 start 1 [1/0 us] [ 3.120112] ehci_hcd 0000:00:1d.7: set dev address 2 for port 1 [ 3.120124] ehci_hcd 0000:00:1d.7: LPM: no device attached [ 3.120439] usb 2-1: udev 2, busnum 2, minor = 129 [ 3.120448] usb 2-1: New USB device found, idVendor=0424, idProduct=2513 [ 3.120543] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.120919] usb 2-1: usb_probe_device [ 3.120923] usb 2-1: configuration #1 chosen from 1 choice [ 3.121120] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 3.121351] hub 2-1:1.0: usb_probe_interface [ 3.121354] hub 2-1:1.0: usb_probe_interface - got id [ 3.121356] hub 2-1:1.0: USB hub found [ 3.121596] hub 2-1:1.0: 3 ports detected [ 3.121704] hub 2-1:1.0: compound device; port removable status: FRR [ 3.121705] hub 2-1:1.0: individual port power switching [ 3.121707] hub 2-1:1.0: individual port over-current protection [ 3.121895] hub 2-1:1.0: TT per port [ 3.121898] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 3.121900] hub 2-1:1.0: power on to power good time: 100ms [ 3.122221] hub 2-1:1.0: local power source is good [ 3.122231] hub 2-1:1.0: enabling power on all ports [ 3.122639] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.122648] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.122655] hub 1-1:1.0: state 7 ports 3 chg 0002 evt 0000 [ 3.122850] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 3.134100] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 3.196073] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd [ 3.207064] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 3.222056] hub 2-1:1.0: port 1: status 0301 change 0001 [ 3.222295] hub 2-1:1.0: port 2: status 0301 change 0001 [ 3.222545] hub 2-1:1.0: port 3: status 0101 change 0001 [ 3.266842] tsc: Refined TSC clocksource calibration: 2294.786 MHz [ 3.266946] Switching to clocksource tsc [ 3.280798] usb 1-1.1: ep0 maxpacket = 8 [ 3.282521] usb 1-1.1: default language 0x0409 [ 3.283021] usb 1-1.1: udev 3, busnum 1, minor = 2 [ 3.283031] usb 1-1.1: New USB device found, idVendor=0a5c, idProduct=4500 [ 3.283144] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.283248] usb 1-1.1: Product: BRCM20702 Hub [ 3.283318] usb 1-1.1: Manufacturer: Apple Inc. [ 3.283673] usb 1-1.1: usb_probe_device [ 3.283677] usb 1-1.1: configuration #1 chosen from 1 choice [ 3.283907] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [ 3.284113] hub 1-1.1:1.0: usb_probe_interface [ 3.284116] hub 1-1.1:1.0: usb_probe_interface - got id [ 3.284118] hub 1-1.1:1.0: USB hub found [ 3.284384] hub 1-1.1:1.0: 3 ports detected [ 3.284494] hub 1-1.1:1.0: compound device; port removable status: FFF [ 3.284495] hub 1-1.1:1.0: ganged power switching [ 3.284496] hub 1-1.1:1.0: global over-current protection [ 3.284498] hub 1-1.1:1.0: power on to power good time: 100ms [ 3.285035] hub 1-1.1:1.0: local power source is good [ 3.285043] hub 1-1.1:1.0: no over-current condition exists [ 3.285049] hub 1-1.1:1.0: enabling power on all ports [ 3.285530] hub 1-1:1.0: state 7 ports 3 chg 0000 evt 0002 [ 3.321803] usb 2-1: link qh256-0001/ffff8802650cf780 start 1 [1/0 us] [ 3.321869] hub 2-1:1.0: state 7 ports 3 chg 000e evt 0000 [ 3.322000] hub 2-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 3.332994] hub 2-1:1.0: port 1 not reset yet, waiting 10ms [ 3.384967] hub 1-1.1:1.0: port 1: status 0101 change 0001 [ 3.385468] hub 1-1.1:1.0: port 2: status 0101 change 0001 [ 3.385969] hub 1-1.1:1.0: port 3: status 0101 change 0001 [ 3.394976] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd [ 3.406958] hub 2-1:1.0: port 1 not reset yet, waiting 10ms [ 3.484225] usb 2-1.1: skipped 1 descriptor after interface [ 3.484672] usb 2-1.1: default language 0x0409 [ 3.485688] usb 1-1.1: link qh128-0601/ffff8802650cf880 start 2 [1/2 us] [ 3.487212] usb 2-1.1: udev 3, busnum 2, minor = 130 [ 3.487223] usb 2-1.1: New USB device found, idVendor=05ac, idProduct=8242 [ 3.487325] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.487428] usb 2-1.1: Product: IR Receiver [ 3.487502] usb 2-1.1: Manufacturer: Apple Computer, Inc. [ 3.487833] usb 2-1.1: usb_probe_device [ 3.487836] usb 2-1.1: configuration #1 chosen from 1 choice [ 3.489715] usb 2-1.1: adding 2-1.1:1.0 (config #1, interface 0) [ 3.489964] usbhid 2-1.1:1.0: usb_probe_interface [ 3.489968] usbhid 2-1.1:1.0: usb_probe_interface - got id [ 3.494139] usbhid 2-1.1:1.0: looking for a minor, starting at 96 [ 3.494495] apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.7-1.1/input0 [ 3.494729] hub 2-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 3.505776] hub 2-1:1.0: port 2 not reset yet, waiting 10ms [ 3.567714] usb 2-1.2: new low-speed USB device number 4 using ehci_hcd [ 3.580865] hub 2-1:1.0: port 2 not reset yet, waiting 10ms [ 3.666301] usb 2-1.2: skipped 1 descriptor after interface [ 3.666312] usb 2-1.2: skipped 1 descriptor after interface [ 3.667199] usb 2-1.2: default language 0x0409 [ 3.676757] usb 2-1.2: udev 4, busnum 2, minor = 131 [ 3.676768] usb 2-1.2: New USB device found, idVendor=045e, idProduct=00db [ 3.676868] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.676972] usb 2-1.2: Product: Natural® Ergonomic Keyboard 4000 [ 3.677049] usb 2-1.2: Manufacturer: Microsoft [ 3.677422] usb 2-1.2: usb_probe_device [ 3.677426] usb 2-1.2: configuration #1 chosen from 1 choice [ 3.678110] usb 2-1.2: adding 2-1.2:1.0 (config #1, interface 0) [ 3.678334] usbhid 2-1.2:1.0: usb_probe_interface [ 3.678337] usbhid 2-1.2:1.0: usb_probe_interface - got id [ 3.685822] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.0/input/input3 [ 3.685943] usb 2-1.2: link qh8-0601/ffff8802650cfb80 start 2 [1/2 us] [ 3.686145] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.7-1.2/input0 [ 3.686274] usb 2-1.2: adding 2-1.2:1.1 (config #1, interface 1) [ 3.686334] usbhid 2-1.2:1.1: usb_probe_interface [ 3.686336] usbhid 2-1.2:1.1: usb_probe_interface - got id [ 3.697654] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.1/input/input4 [ 3.697778] usb 2-1.2: link qh8-0601/ffff8802650cfc80 start 3 [1/2 us] [ 3.698205] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.7-1.2/input1 [ 3.698519] hub 2-1:1.0: port 3, status 0101, change 0000, 12 Mb/s [ 3.709798] hub 2-1:1.0: port 3 not reset yet, waiting 10ms [ 3.767546] ata2.01: failed to resume link (SControl 0) [ 3.779208] ata2.00: SATA link down (SStatus 0 SControl 300) [ 3.779291] ata2.01: SATA link down (SStatus 0 SControl 0) [ 3.779376] usb 2-1.3: new full-speed USB device number 5 using ehci_hcd [ 3.779396] ata1.01: failed to resume link (SControl 0) [ 3.790757] hub 2-1:1.0: port 3 not reset yet, waiting 10ms [ 3.806519] usb usb3: suspend_rh (auto-stop) [ 3.806556] usb usb4: suspend_rh (auto-stop) [ 3.864502] usb 2-1.3: ep0 maxpacket = 8 [ 3.866873] usb 2-1.3: skipped 1 descriptor after interface [ 3.866884] usb 2-1.3: skipped 1 descriptor after interface [ 3.867084] usb 2-1.3: default language 0x0409 [ 3.867992] usb 2-1.3: udev 5, busnum 2, minor = 132 [ 3.868002] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c245 [ 3.868111] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.868214] usb 2-1.3: Product: Gaming Mouse G400 [ 3.868792] usb 2-1.3: Manufacturer: Logitech [ 3.869109] usb 2-1.3: usb_probe_device [ 3.869112] usb 2-1.3: configuration #1 chosen from 1 choice [ 3.869780] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0) [ 3.869954] usbhid 2-1.3:1.0: usb_probe_interface [ 3.869955] usbhid 2-1.3:1.0: usb_probe_interface - got id [ 3.871376] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/input/input5 [ 3.871920] hid-generic 0003:046D:C245.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:1d.7-1.3/input0 [ 3.872047] usb 2-1.3: adding 2-1.3:1.1 (config #1, interface 1) [ 3.872101] usbhid 2-1.3:1.1: usb_probe_interface [ 3.872103] usbhid 2-1.3:1.1: usb_probe_interface - got id [ 3.873705] usbhid 2-1.3:1.1: looking for a minor, starting at 96 [ 3.874106] hid-generic 0003:046D:C245.0005: hiddev0,hidraw4: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:1d.7-1.3/input1 [ 3.874239] hub 1-1.1:1.0: state 7 ports 3 chg 000e evt 0000 [ 3.874403] hub 1-1.1:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 3.930629] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.930723] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3.934157] ata1.00: ATA-9: INTEL SSDSC2CT120A3, 300i, max UDMA/133 [ 3.934266] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.936547] usb 1-1.1.1: new full-speed USB device number 4 using ehci_hcd [ 3.954145] ata1.00: configured for UDMA/133 [ 3.954441] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CT12 300i PQ: 0 ANSI: 5 [ 3.955233] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 3.955381] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.955396] sd 0:0:0:0: [sda] Write Protect is off [ 3.955397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 10 [ 3.955409] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.957034] sda: sda1 sda2 sda3 sda4 [ 3.957520] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.957647] md: Waiting for all devices to be available before autodetect [ 3.957766] md: If you don't use raid, use raid=noautodetect [ 3.958021] md: Autodetecting RAID arrays. [ 3.958133] md: Scanned 0 and added 0 devices. [ 3.958244] md: autorun ... [ 3.958353] md: ... autorun DONE. [ 3.958829] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities [ 3.959174] EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities [ 3.962387] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 3.962539] VFS: Mounted root (ext4 filesystem) readonly on device 8:4. [ 3.963506] Freeing unused kernel memory: 600k freed [ 3.963687] Write protecting the kernel read-only data: 12288k [ 3.966849] Freeing unused kernel memory: 1120k freed [ 3.971946] Freeing unused kernel memory: 1908k freed [ 4.010363] usb 1-1.1.1: ep0 maxpacket = 8 [ 4.013335] usb 1-1.1.1: skipped 1 descriptor after interface [ 4.013412] usb 1-1.1.1: udev 4, busnum 1, minor = 3 [ 4.013462] usb 1-1.1.1: New USB device found, idVendor=05ac, idProduct=820a [ 4.013575] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.013902] usb 1-1.1.1: usb_probe_device [ 4.013950] usb 1-1.1.1: configuration #1 chosen from 1 choice [ 4.014102] usb 1-1.1.1: adding 1-1.1.1:1.0 (config #1, interface 0) [ 4.014297] usbhid 1-1.1.1:1.0: usb_probe_interface [ 4.014404] usbhid 1-1.1.1:1.0: usb_probe_interface - got id [ 4.015734] input: HID 05ac:820a as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input6 [ 4.015890] usb 1-1.1.1: link qh8-0601/ffff8802650cfb00 start 3 [1/2 us] [ 4.016064] hid-generic 0003:05AC:820A.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1a.7-1.1.1/input0 [ 4.016606] hub 1-1.1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 4.030312] kbd_mode (1031) used greatest stack depth: 5280 bytes left [ 4.036584] loadkeys (1032) used greatest stack depth: 5120 bytes left [ 4.036878] init-early.sh (1024) used greatest stack depth: 4728 bytes left [ 4.078435] usb 1-1.1.2: new full-speed USB device number 5 using ehci_hcd [ 4.152281] usb 1-1.1.2: ep0 maxpacket = 8 [ 4.154884] usb 1-1.1.2: skipped 1 descriptor after interface [ 4.154945] usb 1-1.1.2: udev 5, busnum 1, minor = 4 [ 4.155003] usb 1-1.1.2: New USB device found, idVendor=05ac, idProduct=820b [ 4.155119] usb 1-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.155414] usb 1-1.1.2: usb_probe_device [ 4.155455] usb 1-1.1.2: configuration #1 chosen from 1 choice [ 4.155643] usb 1-1.1.2: adding 1-1.1.2:1.0 (config #1, interface 0) [ 4.155829] usbhid 1-1.1.2:1.0: usb_probe_interface [ 4.155870] usbhid 1-1.1.2:1.0: usb_probe_interface - got id [ 4.157461] input: HID 05ac:820b as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input7 [ 4.157851] hid-generic 0003:05AC:820B.0007: input,hidraw6: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1a.7-1.1.2/input0 [ 4.158256] hub 1-1.1:1.0: port 3, status 0101, change 0000, 12 Mb/s [ 4.220347] usb 1-1.1.3: new full-speed USB device number 6 using ehci_hcd [ 4.269619] systemd-udevd[1139]: starting version 189 [ 4.269915] start-stop-daem (1137) used greatest stack depth: 4328 bytes left [ 4.296678] usb 1-1.1.3: skipped 1 descriptor after interface [ 4.296922] usb 1-1.1.3: default language 0x0409 [ 4.297434] usb 1-1.1.3: udev 6, busnum 1, minor = 5 [ 4.297439] usb 1-1.1.3: New USB device found, idVendor=05ac, idProduct=8281 [ 4.297442] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.297445] usb 1-1.1.3: Product: Bluetooth USB Host Controller [ 4.297448] usb 1-1.1.3: Manufacturer: Apple Inc. [ 4.297593] usb 1-1.1.3: usb_probe_device [ 4.297597] usb 1-1.1.3: configuration #1 chosen from 1 choice [ 4.297691] usb 1-1.1.3: adding 1-1.1.3:1.0 (config #1, interface 0) [ 4.297750] usb 1-1.1.3: adding 1-1.1.3:1.1 (config #1, interface 1) [ 4.297779] usb 1-1.1.3: adding 1-1.1.3:1.2 (config #1, interface 2) [ 4.297806] usb 1-1.1.3: adding 1-1.1.3:1.3 (config #1, interface 3) [ 4.297833] hub 2-1:1.0: state 7 ports 3 chg 0000 evt 0008 [ 4.297926] hub 1-1.1:1.0: state 7 ports 3 chg 0000 evt 0008 [ 4.314332] bcma: bus0: Found chip with id 0x4331, rev 0x02 and package 0x09 [ 4.314367] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 4.314393] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 4.314442] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0) [ 4.316581] pci 0000:00:00.0: Intel Sandybridge Chipset [ 4.316689] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 4.317734] pci 0000:00:00.0: detected 65536K stolen memory [ 4.317796] i915 0000:00:02.0: setting latency timer to 64 [ 4.364945] bcma: bus0: Bus registered [ 4.396878] i915 0000:00:02.0: irq 46 for MSI/MSI-X [ 4.396890] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.396891] [drm] Driver supports precise vblank timestamp query. [ 4.396975] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.401954] b43-phy0: Broadcom 4331 WLAN found (core revision 29) [ 4.402409] b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1 [ 4.402745] Broadcom 43xx driver loaded [ Features: PNL ] [ 4.444000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.444475] Registered led device: b43-phy0::tx [ 4.444583] Registered led device: b43-phy0::rx [ 4.444687] Registered led device: b43-phy0::radio [ 4.452710] Bluetooth: Core ver 2.16 [ 4.452726] NET: Registered protocol family 31 [ 4.452727] Bluetooth: HCI device and connection manager initialized [ 4.452735] Bluetooth: HCI socket layer initialized [ 4.452739] Bluetooth: L2CAP socket layer initialized [ 4.452746] Bluetooth: SCO socket layer initialized [ 4.453955] btusb 1-1.1.3:1.0: usb_probe_interface [ 4.453960] btusb 1-1.1.3:1.0: usb_probe_interface - got id [ 4.454152] btusb 1-1.1.3:1.2: usb_probe_interface [ 4.454155] btusb 1-1.1.3:1.2: usb_probe_interface - got id [ 4.454164] btusb 1-1.1.3:1.3: usb_probe_interface [ 4.454167] btusb 1-1.1.3:1.3: usb_probe_interface - got id [ 4.454185] usbcore: registered new interface driver btusb [ 4.454373] usb 1-1.1.3: link qh1-3008/ffff88026362e500 start 0 [1/2 us] [ 4.475260] usb 1-1.1.1: unlink qh8-0601/ffff8802650cfb00 start 3 [1/2 us] [ 4.488133] ehci_hcd 0000:00:1a.7: reused qh ffff8802650cfb00 schedule [ 4.488145] usb 1-1.1.1: link qh8-0601/ffff8802650cfb00 start 3 [1/2 us] [ 4.489146] [drm:intel_disable_transcoder] *ERROR* failed to disable transcoder 1 [ 4.507214] usb 1-1.1.1: unlink qh8-0601/ffff8802650cfb00 start 3 [1/2 us] [ 4.522768] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 4.530220] hub 1-1.1:1.0: state 7 ports 3 chg 0000 evt 0006 [ 4.530751] hub 1-1.1:1.0: port 1, status 0100, change 0001, 12 Mb/s [ 4.530761] usb 1-1.1.1: USB disconnect, device number 4 [ 4.530766] usb 1-1.1.1: unregistering device [ 4.530771] usb 1-1.1.1: unregistering interface 1-1.1.1:1.0 [ 4.556329] usb 1-1.1.1: usb_disable_device nuking all URBs [ 4.614105] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [ 4.669136] hub 1-1.1:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 4.669384] hub 1-1.1:1.0: port 2, status 0100, change 0001, 12 Mb/s [ 4.669388] usb 1-1.1.2: USB disconnect, device number 5 [ 4.669389] usb 1-1.1.2: unregistering device [ 4.669392] usb 1-1.1.2: unregistering interface 1-1.1.2:1.0 [ 4.713270] usb 1-1.1.2: usb_disable_device nuking all URBs [ 4.815542] fbcon: inteldrmfb (fb0) is primary device [ 4.817230] hub 1-1.1:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [ 4.817237] hub 1-1.1:1.0: state 7 ports 3 chg 0000 evt 0000 [ 3.955741] ACPI: Invalid Power Resource to register! [ 5.138954] Console: switching to colour frame buffer device 240x67 [ 5.143838] fb0: inteldrmfb frame buffer device [ 5.143839] drm: registered panic notifier [ 5.144679] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 5.144721] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 5.144821] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.144853] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251) [ 5.144859] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.150594] systemd-udevd (1150) used greatest stack depth: 3296 bytes left [ 5.777001] vboxdrv: Found 4 processor cores. [ 5.777182] vboxdrv: fAsync=0 offMin=0x20f offMax=0x126b [ 5.777227] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 5.777229] vboxdrv: Successfully loaded version 4.1.20 (interface 0x00190000). [ 5.838256] EXT4-fs (sda4): re-mounted. Opts: discard [ 6.468583] usb 2-1.3: link qh1-0601/ffff880265c25e80 start 0 [1/2 us] [ 6.498242] tg3 0000:02:00.0: irq 47 for MSI/MSI-X [ 6.498248] tg3 0000:02:00.0: irq 48 for MSI/MSI-X [ 6.498253] tg3 0000:02:00.0: irq 49 for MSI/MSI-X [ 6.498258] tg3 0000:02:00.0: irq 50 for MSI/MSI-X [ 6.498263] tg3 0000:02:00.0: irq 51 for MSI/MSI-X [ 6.793668] usb 1-1.1.3: unlink qh1-3008/ffff88026362e500 start 0 [1/2 us] [ 6.793689] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.895972] usb 1-1: clear tt buffer port 1, a6 ep2 t04048d82 [ 6.945967] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) [ 6.985379] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.213293] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex [ 10.213297] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX [ 10.213298] tg3 0000:02:00.0: eth0: EEE is disabled [ 10.214309] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.035530] sd 0:0:0:0: [sda] [ 11.035533] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 11.035535] sd 0:0:0:0: [sda] [ 11.035536] Sense Key : Illegal Request [current] [ 11.035539] sd 0:0:0:0: [sda] [ 11.035541] Add. Sense: Invalid field in cdb [ 11.035543] sd 0:0:0:0: [sda] CDB: [ 11.035544] Write(10): 2a 08 0b ad d1 78 00 00 08 00 [ 11.035550] end_request: critical target error, dev sda, sector 195940728 [ 11.035552] end_request: critical target error, dev sda, sector 195940728 [ 11.035557] Aborting journal on device sda4-8. [ 11.046413] EXT4-fs error (device sda4): ext4_journal_start_sb:348: Detected aborted journal [ 11.046418] EXT4-fs (sda4): Remounting filesystem read-only [ 18.737844] tty_init_dev: 26 callbacks suppressed -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists