| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1346233691-10294-1-git-send-email-hvaibhav@ti.com>
Date: Wed, 29 Aug 2012 15:18:11 +0530
From: Vaibhav Hiremath <hvaibhav@...com>
To: <linux-omap@...r.kernel.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<devicetree-discuss@...ts.ozlabs.org>,
<linux-kernel@...r.kernel.org>, Vaibhav Hiremath <hvaibhav@...com>,
Benoit Cousson <b-cousson@...com>,
Tony Lindgren <tony@...mide.com>,
Paul Walmsley <paul@...an.com>, Kevin Hilman <khilman@...com>
Subject: [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer
With the new devices (like, AM33XX and OMAP5) we now only support
DT boot mode of operation and now it is the time to start killing
slowly the dependency on hwmod, so with this patch, we are starting
with device resources.
The idea here is implemented considering to both boot modes -
- DT boot mode
OF framework will construct the resource structure (currently
does for MEM & IRQ resource) and we should respect/use these
resources, killing hwmod dependency.
If pdev->num_resources > 0, we assume that MEM & IRQ resources
have been allocated by OF layer already (through DTB).
Once DMA resource is available from OF layer, we should
kill filling any resources from hwmod.
- Non-DT boot mode
Here, pdev->num_resources = 0, and we should get all the
resources from hwmod (following existing steps)
Signed-off-by: Vaibhav Hiremath <hvaibhav@...com>
Cc: Benoit Cousson <b-cousson@...com>
Cc: Tony Lindgren <tony@...mide.com>
Cc: Paul Walmsley <paul@...an.com>
Cc: Kevin Hilman <khilman@...com>
---
This patch is tested on BeagleBone and AM37xEVM.
Why RFC?
Still we have function duplication omap_device_fill_resources() and
omap_device_fill_dma_resources(), we can actually split the function
into 3 resources and avoid duplication -
- omap_device_fill_dma_resources()
- omap_device_fill_mem_resources()
- omap_device_fill_irq_resources()
Actually I wanted to clean it further but thought of getting
feedback first and then proceed further.
arch/arm/mach-omap2/omap_hwmod.c | 27 ++++++++++
arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 +
arch/arm/plat-omap/omap_device.c | 72 +++++++++++++++++++++----
3 files changed, 88 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 31ec283..edabfb3 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3330,6 +3330,33 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
}
/**
+ * omap_hwmod_fill_dma_resources - fill struct resource array with dma data
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the array of struct resource to fill
+ *
+ * Fill the struct resource array @res with dma resource data from the
+ * omap_hwmod @oh. Intended to be called by code that registers
+ * omap_devices. See also omap_hwmod_count_resources(). Returns the
+ * number of array elements filled.
+ */
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res)
+{
+ int i, sdma_reqs_cnt;
+ int r = 0;
+
+ sdma_reqs_cnt = _count_sdma_reqs(oh);
+ for (i = 0; i < sdma_reqs_cnt; i++) {
+ (res + r)->name = (oh->sdma_reqs + i)->name;
+ (res + r)->start = (oh->sdma_reqs + i)->dma_req;
+ (res + r)->end = (oh->sdma_reqs + i)->dma_req;
+ (res + r)->flags = IORESOURCE_DMA;
+ r++;
+ }
+
+ return r;
+}
+
+/**
* omap_hwmod_get_resource_byname - fetch IP block integration data by name
* @oh: struct omap_hwmod * to operate on
* @type: one of the IORESOURCE_* constants from include/linux/ioport.h
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 9b9646c..0533073 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -615,6 +615,7 @@ int omap_hwmod_softreset(struct omap_hwmod *oh);
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
const char *name, struct resource *res);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index c490240..fd15a3a 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -486,6 +486,33 @@ static int omap_device_fill_resources(struct omap_device *od,
}
/**
+ * omap_device_fill_dma_resources - fill in array of struct resource with dma resources
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the dma resource data for this omap_device @od. Used by
+ * omap_device_alloc() after calling omap_device_count_resources().
+ *
+ * Ideally this function would not be needed at all. If we have
+ * mechanism to get dma resources from DT.
+ *
+ * Returns 0.
+ */
+static int omap_device_fill_dma_resources(struct omap_device *od,
+ struct resource *res)
+{
+ int i, r;
+
+ for (i = 0; i < od->hwmods_cnt; i++) {
+ r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
+ res += r;
+ }
+
+ return 0;
+}
+
+/**
* omap_device_alloc - allocate an omap_device
* @pdev: platform_device that will be included in this omap_device
* @oh: ptr to the single omap_hwmod that backs this omap_device
@@ -524,24 +551,45 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev,
od->hwmods = hwmods;
od->pdev = pdev;
+ res_count = omap_device_count_resources(od);
/*
- * HACK: Ideally the resources from DT should match, and hwmod
- * should just add the missing ones. Since the name is not
- * properly populated by DT, stick to hwmod resources only.
+ * DT Boot:
+ * OF framework will construct the resource structure (currently
+ * does for MEM & IRQ resource) and we should respect/use these
+ * resources, killing hwmod dependency.
+ * If pdev->num_resources > 0, we assume that MEM & IRQ resources
+ * have been allocated by OF layer already (through DTB).
+ *
+ * Non-DT Boot:
+ * Here, pdev->num_resources = 0, and we should get all the
+ * resources from hwmod.
+ *
+ * TODO: Once DMA resource is available from OF layer, we should
+ * kill filling any resources from hwmod.
*/
- if (pdev->num_resources && pdev->resource)
- dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
- __func__, pdev->num_resources);
-
- res_count = omap_device_count_resources(od);
- if (res_count > 0) {
- dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
- __func__, res_count);
+ if (res_count > pdev->num_resources) {
+ /* Allocate resources memory to account for new resources */
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
if (!res)
goto oda_exit3;
- omap_device_fill_resources(od, res);
+ /*
+ * If pdev->num_resources > 0, then assume that,
+ * MEM and IRQ resources will only come from DT and only
+ * fill DMA resource from hwmod layer.
+ */
+ if (pdev->num_resources && pdev->resource) {
+ dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, res_count);
+ memcpy(res, pdev->resource,
+ sizeof(struct resource) * pdev->num_resources);
+ omap_device_fill_dma_resources(od,
+ &res[pdev->num_resources]);
+ } else {
+ dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
+ __func__, res_count);
+ omap_device_fill_resources(od, res);
+ }
ret = platform_device_add_resources(pdev, res, res_count);
kfree(res);
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists