lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1346317203-7357-2-git-send-email-myungjoo.ham@samsung.com>
Date:	Thu, 30 Aug 2012 18:00:02 +0900
From:	MyungJoo Ham <myungjoo.ham@...sung.com>
To:	linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:	myungjoo.ham@...il.com, rjw@...k.pl, kyungmin.park@...sung.com,
	khilman@...com, markgross@...gnar.org, jean.pihet@...oldbits.com,
	mturquette@...com, jonghwa3.lee@...sung.com
Subject: [PATCH v3 1/2] PM / devfreq: add global PM QoS support

Even if the performance of a device is controlled properly with devfreq,
sometimes, we still need to get PM-QoS inputs in order to meet the
required performance.

In our testbed of Exynos4412, which has on-chip various DMA devices, the
memory interface and system bus are controlled according to their
utilization by devfreq. However, in some multimedia applications
including video-playing with MFC (multi-function codec) H/W and
photo/video-capturing with FIMC H/W, we have observed issues due to
insufficient DMA throughput or latency.

In such applications, there are deadlines: less than 16.6ms with 60Hz.
With shorter polling intervals (5 ~ 15ms), the frequencies fluctuate
within a frame and we get missing frames and distorted pictures.
With longer polling intervals (20 ~ 100ms), the response time is not
sufficient and we get distorted or broken images. In other words,
regardless of polling interval, we get poor results with hard-deadline
H/Ws. They, in fact, have a preset requirement on DMA throughput.

Thus, we need PM-QoS capabilities in devfreq. (Note that for general
user applications, devfreq for bus/memory works fine. They are not so
sensitive to tens of ms in performance increasing responses in general.

In order to express how to handle QoS requests in devfreq devices,
the devfreq device drivers only need to express the mappings of
QoS value and frequency pairs with QoS class along with
devfreq_add_device() call.

As a side effect of the implementation, which happens to be positive,
min/max freq is now enforced regardless of governor implementation.

Tested on Exynos4412 machines with memory/bus frequencies and multimedia
H/W blocks. (camera, video decoding, and video encoding)

Signed-off-by: MyungJoo Ham <myungjoo.ham@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>

---
Changed from V2-resend
- Removed dependencies on global pm-qos class definitions
- Revised data structure handling pm-qos (being ready for dev-pm-qos)

Changes from V2
- Rebased

Changes from V1
- Error handling at devfreq_add_device()
- Handling pm_qos_max information
- Styly update
---
 drivers/devfreq/devfreq.c |  127 +++++++++++++++++++++++++++++++++++++++++++--
 include/linux/devfreq.h   |   41 ++++++++++++++
 2 files changed, 164 insertions(+), 4 deletions(-)

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 00e326c..d74b382 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -25,6 +25,7 @@
 #include <linux/list.h>
 #include <linux/printk.h>
 #include <linux/hrtimer.h>
+#include <linux/pm_qos.h>
 #include "governor.h"
 
 static struct class *devfreq_class;
@@ -136,8 +137,13 @@ int update_devfreq(struct devfreq *devfreq)
 	 * List from the highest proiority
 	 * max_freq (probably called by thermal when it's too hot)
 	 * min_freq
+	 * qos_min_freq
 	 */
 
+	if (devfreq->qos_min_freq && freq < devfreq->qos_min_freq) {
+		freq = devfreq->qos_min_freq;
+		flags &= ~DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use GLB */
+	}
 	if (devfreq->min_freq && freq < devfreq->min_freq) {
 		freq = devfreq->min_freq;
 		flags &= ~DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use GLB */
@@ -164,12 +170,12 @@ int update_devfreq(struct devfreq *devfreq)
  * devfreq_notifier_call() - Notify that the device frequency requirements
  *			   has been changed out of devfreq framework.
  * @nb		the notifier_block (supposed to be devfreq->nb)
- * @type	not used
+ * @val		not used.
  * @devp	not used
  *
  * Called by a notifier that uses devfreq->nb.
  */
-static int devfreq_notifier_call(struct notifier_block *nb, unsigned long type,
+static int devfreq_notifier_call(struct notifier_block *nb, unsigned long val,
 				 void *devp)
 {
 	struct devfreq *devfreq = container_of(nb, struct devfreq, nb);
@@ -183,6 +189,49 @@ static int devfreq_notifier_call(struct notifier_block *nb, unsigned long type,
 }
 
 /**
+ * devfreq_qos_notifier_call() -
+ */
+static int devfreq_qos_notifier_call(struct notifier_block *nb,
+				     unsigned long value, void *devp)
+{
+	struct devfreq *devfreq = container_of(nb, struct devfreq, qos_nb);
+	int ret;
+	int i;
+	s32 default_value = PM_QOS_DEFAULT_VALUE;
+	struct devfreq_pm_qos_table *qos_list = devfreq->profile->qos_list;
+	bool qos_use_max = devfreq->profile->qos_use_max;
+
+	if (!qos_list)
+		return NOTIFY_DONE;
+
+	mutex_lock(&devfreq->lock);
+
+	if (value == default_value) {
+		devfreq->qos_min_freq = 0;
+		goto update;
+	}
+
+	for (i = 0; qos_list[i].freq; i++) {
+		/* QoS Met */
+		if ((qos_use_max && qos_list[i].qos_value >= value) ||
+		    (!qos_use_max && qos_list[i].qos_value <= value)) {
+			devfreq->qos_min_freq = qos_list[i].freq;
+			goto update;
+		}
+	}
+
+	/* Use the highest QoS freq */
+	if (i > 0)
+		devfreq->qos_min_freq = qos_list[i - 1].freq;
+
+update:
+	ret = update_devfreq(devfreq);
+	mutex_unlock(&devfreq->lock);
+
+	return ret;
+}
+
+/**
  * _remove_devfreq() - Remove devfreq from the device.
  * @devfreq:	the devfreq struct
  * @skip:	skip calling device_unregister().
@@ -219,6 +268,10 @@ static void _remove_devfreq(struct devfreq *devfreq, bool skip)
 
 	devfreq->being_removed = true;
 
+	if (devfreq->profile->qos_type)
+		pm_qos_remove_notifier(devfreq->profile->qos_type,
+				       &devfreq->qos_nb);
+
 	if (devfreq->profile->exit)
 		devfreq->profile->exit(devfreq->dev.parent);
 
@@ -390,7 +443,7 @@ struct devfreq *devfreq_add_device(struct device *dev,
 				   void *data)
 {
 	struct devfreq *devfreq;
-	int err = 0;
+	int err = 0, i;
 
 	if (!dev || !profile || !governor) {
 		dev_err(dev, "%s: Invalid parameters.\n", __func__);
@@ -429,6 +482,61 @@ struct devfreq *devfreq_add_device(struct device *dev,
 	devfreq->next_polling = devfreq->polling_jiffies
 			      = msecs_to_jiffies(devfreq->profile->polling_ms);
 	devfreq->nb.notifier_call = devfreq_notifier_call;
+	devfreq->qos_nb.notifier_call = devfreq_qos_notifier_call;
+
+	/* Check the sanity of qos_list/qos_type */
+	if (profile->qos_type || profile->qos_list) {
+
+		if (WARN(!profile->qos_type || !profile->qos_list,
+			 "QoS requirement partially omitted for %s.\n",
+			 dev_name(dev))) {
+
+			err = -EINVAL;
+			goto err_dev;
+		}
+
+		if (WARN(!profile->qos_list[0].freq,
+			 "The first QoS requirement is the end of list for %s.\n",
+			 dev_name(dev))) {
+
+			err = -EINVAL;
+			goto err_dev;
+		}
+
+		for (i = 1; profile->qos_list[i].freq; i++) {
+			if (WARN(profile->qos_list[i].freq <=
+				 profile->qos_list[i - 1].freq,
+				 "%s's qos_list[].freq not sorted in the ascending order. ([%d]=%lu, [%d]=%lu)\n",
+				 dev_name(dev), i - 1,
+				 profile->qos_list[i - 1].freq, i,
+				 profile->qos_list[i].freq)) {
+
+				err = -EINVAL;
+				goto err_dev;
+			}
+
+			/*
+			 * If QoS type is throughput(PM_QOS_MAX)-like, qos_value
+			 * should be sorted in the ascending order.
+			 * If QoS type is latency(PM_QOS_MIN)-like, qos_value
+			 * should be sorted in the descending order.
+			 */
+			if (WARN((profile->qos_use_max &&
+				  profile->qos_list[i - 1].qos_value >
+				  profile->qos_list[i].qos_value) ||
+				 (!profile->qos_use_max &&
+				  profile->qos_list[i - 1].qos_value <
+				  profile->qos_list[i].qos_value),
+				 "%s's qos_list[].qos_value is not sorted according to its QoS class.\n",
+				 dev_name(dev))) {
+
+				err = -EINVAL;
+				goto err_dev;
+			}
+		}
+
+		pm_qos_add_notifier(profile->qos_type, &devfreq->qos_nb);
+	}
 
 	devfreq->trans_table =	devm_kzalloc(dev, sizeof(unsigned int) *
 						devfreq->profile->max_state *
@@ -443,7 +551,7 @@ struct devfreq *devfreq_add_device(struct device *dev,
 	err = device_register(&devfreq->dev);
 	if (err) {
 		put_device(&devfreq->dev);
-		goto err_dev;
+		goto err_qos_add;
 	}
 
 	if (governor->init)
@@ -471,6 +579,9 @@ out:
 
 err_init:
 	device_unregister(&devfreq->dev);
+err_qos_add:
+	if (profile->qos_type || profile->qos_list)
+		pm_qos_remove_notifier(profile->qos_type, &devfreq->qos_nb);
 err_dev:
 	mutex_unlock(&devfreq->lock);
 	kfree(devfreq);
@@ -568,6 +679,13 @@ static ssize_t show_central_polling(struct device *dev,
 		       !to_devfreq(dev)->governor->no_central_polling);
 }
 
+static ssize_t show_qos_min_freq(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	return sprintf(buf, "%lu\n", to_devfreq(dev)->qos_min_freq);
+}
+
 static ssize_t store_min_freq(struct device *dev, struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
@@ -685,6 +803,7 @@ static struct device_attribute devfreq_attrs[] = {
 	       store_polling_interval),
 	__ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq),
 	__ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq),
+	__ATTR(qos_min_freq, S_IRUGO, show_qos_min_freq, NULL),
 	__ATTR(trans_stat, S_IRUGO, show_trans_table, NULL),
 	{ },
 };
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 30dc0d8..d11db17 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -53,6 +53,21 @@ struct devfreq_dev_status {
 #define DEVFREQ_FLAG_LEAST_UPPER_BOUND		0x1
 
 /**
+ * struct devfreq_pm_qos_table - An PM QoS requiement entry for devfreq dev.
+ * @freq		Lowest frequency to meet the QoS requirement
+ *			represented by qos_value. If freq=0, it means that
+ *			this element is the last in the array.
+ * @qos_value		The qos value defined in pm_qos_params.h
+ *
+ * Note that the array of devfreq_pm_qos_table should be sorted by freq
+ * in the ascending order except for the last element, which should be 0.
+ */
+struct devfreq_pm_qos_table {
+	unsigned long freq; /* 0 if this is the last element */
+	s32 qos_value;
+};
+
+/**
  * struct devfreq_dev_profile - Devfreq's user device profile
  * @initial_freq	The operating frequency when devfreq_add_device() is
  *			called.
@@ -71,11 +86,33 @@ struct devfreq_dev_status {
  *			from devfreq_remove_device() call. If the user
  *			has registered devfreq->nb at a notifier-head,
  *			this is the time to unregister it.
+ * @qos_type		QoS Type (defined in pm_qos_params.h)
+ *			0 (PM_QOS_RESERVED) if not used.
+ * @qos_use_max		True: the highest QoS value is used (for QoS
+ *			requirement of throughput, bandwidth, or similar)
+ *			False: the lowest QoS value is used (for QoS
+ *			requirement of latency, delay, or similar)
+ * @enable_dev_pm_qos	dev_pm_qos is enabled using the qos_list.
+ * @qos_list		Array of QoS requirements ending with .freq = 0
+ *			NULL if not used. It should be either NULL or
+ *			have a length > 1 with a first element effective.
+ *			This QoS specification is shared by the global
+ *			PM QoS (qos_type) and the per-dev PM QoS
+ *			(enable_dev_pm_qos).
+ *
+ * Note that the array of qos_list should be sorted by freq
+ * in the ascending order.
  */
 struct devfreq_dev_profile {
 	unsigned long initial_freq;
 	unsigned int polling_ms;
 
+	/* Optional QoS Handling Specification */
+	int qos_type; /* 0: No global PM-QoS support */
+	bool qos_use_max; /* true if "bandwidth"/"throughput"-like values */
+	bool enable_dev_pm_qos; /* False: No per-dev PM-QoS support */
+	struct devfreq_pm_qos_table *qos_list; /* QoS handling specification */
+
 	int (*target)(struct device *dev, unsigned long *freq, u32 flags);
 	int (*get_dev_status)(struct device *dev,
 			      struct devfreq_dev_status *stat);
@@ -139,6 +176,8 @@ struct devfreq_governor {
  *			order to prevent trying to remove the object multiple times.
  * @min_freq	Limit minimum frequency requested by user (0: none)
  * @max_freq	Limit maximum frequency requested by user (0: none)
+ * @qos_nb	notifier block used to notify pm qos requests
+ * @qos_min_freq	Limit minimum frequency requested by QoS
  *
  * This structure stores the devfreq information for a give device.
  *
@@ -167,6 +206,8 @@ struct devfreq {
 
 	unsigned long min_freq;
 	unsigned long max_freq;
+	struct notifier_block qos_nb;
+	unsigned long qos_min_freq;
 
 	/* information for device freqeuncy transition */
 	unsigned int total_trans;
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ