lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAKdam573NqiCd2=CQ2kg1g+VqjS6z8g=QbPfMZZbm8P98yDP_A@mail.gmail.com>
Date:	Fri, 31 Aug 2012 15:51:20 +0530
From:	"Poddar, Sourav" <sourav.poddar@...com>
To:	Benoit Cousson <b-cousson@...com>
Cc:	devicetree-discuss@...ts.ozlabs.org,
	linux-arm-kernel@...ts.infradead.org, linux-omap@...r.kernel.org,
	linux-kernel@...r.kernel.org, Felipe Balbi <balbi@...com>,
	Santosh Shilimkar <santosh.shilimkar@...com>
Subject: Re: [PATCHv3 0/4] Add device tree data for omap5

Hi Benoit,

On Fri, Aug 31, 2012 at 3:02 PM, Benoit Cousson <b-cousson@...com> wrote:
> Hi Sourav,
>
> While rebasing your series on top of Tony's lo/devel-dt, I realized that the keypad nodes are not located at the correct place :-(
>
> At the moment they are just floating at the top level of the dts while they belong to the ocp bus and thus should be put there.
>
My bad, never realised always used it at the top level. Sorry for the
inconvenience.
> I fixed that since it was trivial and cleaned as well the changelog and the comments to aligned then properly. I added as well the physical address to the node name and a label for easy reference at board level.
>
Thanks for fixing it up.
> I did some basic test on my OMAP4 sdp, but that all I can do so far.
>
> Could you just check if this is still fine for OMAP5 before I ask Tony to pull that.
>
I just booted the below mentioned branch and its booting fine on omap5. Did
some keypad functionality test also and keypad seems to be working
fine on omap5.
> I based that on top of Tony's DT patches due to conflict with the existing MMC patch in it.
>
>
>
> The following changes since commit 85d7ff9b907685b6469058888f1d961b3e8d47ad:
>   Olof Johansson (1):
>         ARM: omap: add dtb targets
>
> are available in the git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.7/dts
>
> Sourav Poddar (6):
>       arm/dts: omap5-evm: Add I2C support
>       arm/dts: omap5-evm: Add tmp102 sensor support
>       arm/dts: omap5-evm: Add keypad data
>       arm/dts: omap5-evm: Add bmp085 sensor support
>       arm/dts: omap4-sdp: Add keypad data
>       Documentation: dt: i2c: trivial-devices: Update for tmp102
>
>  .../devicetree/bindings/i2c/trivial-devices.txt    |    1 +
>  arch/arm/boot/dts/omap4-sdp.dts                    |   70 ++++++++++++++++++++
>  arch/arm/boot/dts/omap4.dtsi                       |    5 ++
>  arch/arm/boot/dts/omap5-evm.dts                    |   33 +++++++++
>  arch/arm/boot/dts/omap5.dtsi                       |   40 +++++++++++
>  5 files changed, 149 insertions(+), 0 deletions(-)
>
> Regards,
> Benoit
>

Thanks,
Sourav
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ