| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1346684762-8008-1-git-send-email-justinmattock@gmail.com>
Date: Mon, 3 Sep 2012 08:06:02 -0700
From: "Justin P. Mattock" <justinmattock@...il.com>
To: pavel@....cz
Cc: gregkh@...uxfoundation.org, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org,
"Justin P. Mattock" <justinmattock@...il.com>
Subject: [PATCH]NEXT:staging "winbond" Fix typos.
From: "Justin P. Mattock" <justinmattock@...il.com>
Signed-off-by: Justin P. Mattock <justinmattock@...il.com>
---
The below patch fixes typos found while reading through staging "winbond".
drivers/staging/winbond/localpara.h | 4 ++--
drivers/staging/winbond/mds.c | 2 +-
drivers/staging/winbond/mto.c | 2 +-
drivers/staging/winbond/phy_calibration.c | 14 +++++++-------
drivers/staging/winbond/reg.c | 2 +-
drivers/staging/winbond/sme_api.h | 2 +-
drivers/staging/winbond/wb35reg.c | 4 ++--
drivers/staging/winbond/wb35tx.c | 8 ++++----
drivers/staging/winbond/wb35tx_s.h | 2 +-
9 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/winbond/localpara.h b/drivers/staging/winbond/localpara.h
index d798057..84effc4 100644
--- a/drivers/staging/winbond/localpara.h
+++ b/drivers/staging/winbond/localpara.h
@@ -137,7 +137,7 @@ struct wb_local_para {
u8 iPowerSaveMode; /* 0 indicates on, 1 indicates off */
u8 ATIMmode;
u8 ExcludeUnencrypted;
- /* Unit ime count for the decision to enter PS mode */
+ /* Unit time count for the decision to enter PS mode */
u16 CheckCountForPS;
u8 boHasTxActivity;/* tx activity has occurred */
u8 boMacPsValid; /* Power save mode obtained from H/W is valid or not */
@@ -187,7 +187,7 @@ struct wb_local_para {
u8 reserved7[3];
struct chan_info CurrentChan; /* Current channel no. and channel band. It may be changed by scanning. */
- u8 boHandover; /* Roaming, Hnadover to other AP. */
+ u8 boHandover; /* Roaming, Handover to other AP. */
u8 boCCAbusy;
u16 CWMax; /* It may not be the real value that H/W used */
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index c9f0e8f..1b8b8ac 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -569,7 +569,7 @@ Mds_SendComplete(struct wbsoft_priv *adapter, struct T02_descriptor *pT02)
unsigned char SendOK = true;
u8 RetryCount, TxRate;
- if (pT02->T02_IgnoreResult) /* Don't care the result */
+ if (pT02->T02_IgnoreResult) /* Don't care about the result */
return;
if (pT02->T02_IsLastMpdu) {
/* TODO: DTO -- get the retry count and fragment count */
diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c
index 1b52ebd..560c0ab 100644
--- a/drivers/staging/winbond/mto.c
+++ b/drivers/staging/winbond/mto.c
@@ -23,7 +23,7 @@
#include "core.h"
/* Declare SQ3 to rate and fragmentation threshold table */
-/* Declare fragmentation thresholds table */
+/* Declare fragmentation threshold table */
#define MTO_MAX_FRAG_TH_LEVELS 5
#define MTO_MAX_DATA_RATE_LEVELS 12
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index 77a3fff..cabae34 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -399,7 +399,7 @@ void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequen
val |= MASK_ADC_DC_CAL_STR;
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val);
- /* e. The result are shown in "adc_dc_cal_i[8:0] and adc_dc_cal_q[8:0]" */
+ /* e. The results are shown in "adc_dc_cal_i[8:0] and adc_dc_cal_q[8:0]" */
#ifdef _DEBUG
hw_get_dxx_reg(phw_data, REG_OFFSET_READ, &val);
PHY_DEBUG(("[CAL] REG_OFFSET_READ = 0x%08X\n", val));
@@ -720,7 +720,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
for (capture_time = 0; capture_time < 10; capture_time++) {
/*
* a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to
- * enable "IQ alibration Mode II"
+ * enable "IQ calibration Mode II"
*/
reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
reg_mode_ctrl &= ~MASK_IQCAL_MODE;
@@ -750,7 +750,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
/*
* d. Set iqcal_mode[1:0] to 0x3 and set "calib_start" to 0x1 to
- * enable "IQ alibration Mode II"
+ * enable "IQ calibration Mode II"
*/
/* hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val); */
hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl);
@@ -980,7 +980,7 @@ void _tx_iq_calibration_winbond(struct hw_data *phw_data)
phy_set_rf_data(phw_data, 0, (0<<24)|0xFDF1C0);
/* ; [BB-chip]: Calibration (6f).Send test pattern */
/* ; [BB-chip]: Calibration (6g). Search RXGCL optimal value */
- /* ; [BB-chip]: Calibration (6h). Caculate TX-path IQ imbalance and setting TX path IQ compensation table */
+ /* ; [BB-chip]: Calibration (6h). Calculate TX-path IQ imbalance and setting TX path IQ compensation table */
/* phy_set_rf_data(phw_data, 3, (3<<24)|0x025586); */
msleep(30); /* 20060612.1.a 30ms delay. Add the follow 2 lines */
@@ -1373,7 +1373,7 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
/***************************************************************/
void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency)
{
-/* figo 20050523 marked this flag for can't compile for relesase */
+/* figo 20050523 marked this flag for can't compile for release */
#ifdef _DEBUG
s32 rx_cal_reg[4];
u32 val;
@@ -1397,7 +1397,7 @@ void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency)
/* ; [BB-chip]: Calibration (7f). Send test pattern */
/* ; [BB-chip]: Calibration (7g). Search RXGCL optimal value */
- /* ; [BB-chip]: Calibration (7h). Caculate RX-path IQ imbalance and setting RX path IQ compensation table */
+ /* ; [BB-chip]: Calibration (7h). Calculate RX-path IQ imbalance and setting RX path IQ compensation table */
result = _rx_iq_calibration_loop_winbond(phw_data, 12589, frequency);
@@ -1454,7 +1454,7 @@ void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency)
_rxadc_dc_offset_cancellation_winbond(phw_data, frequency);
/* _txidac_dc_offset_cancellation_winbond(phw_data); */
- /* _txqdac_dc_offset_cacellation_winbond(phw_data); */
+ /* _txqdac_dc_offset_cancellation_winbond(phw_data); */
_tx_iq_calibration_winbond(phw_data);
_rx_iq_calibration_winbond(phw_data, frequency);
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index 1b38d6d..5ecf9a1 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -693,7 +693,7 @@ u32 w89rf242_rf_data[] = {
(0x0E << 24) | 0x5557DC, /* 1555F ; IBSC (0x0E) -- IRLNA & IRLNB (PTAT & Const current)=01/01; FA5976B_1.3F */
(0x10 << 24) | 0x000C20, /* 00030 ; TMODA (0x10) -- LNA_gain_step=0011 ; LNA=15/16dB */
(0x11 << 24) | 0x0C0022, /* 03000 ; TMODB (0x11) -- Turn ON RX-Q path Test Switch; To improve IQ path group delay (FA5976A_1.3C) */
- (0x12 << 24) | 0x000024 /* TMODC (0x12) -- Turn OFF Tempearure sensor */
+ (0x12 << 24) | 0x000024 /* TMODC (0x12) -- Turn OFF Temperature sensor */
};
u32 w89rf242_channel_data_24[][2] = {
diff --git a/drivers/staging/winbond/sme_api.h b/drivers/staging/winbond/sme_api.h
index 8f4596c..712331b 100644
--- a/drivers/staging/winbond/sme_api.h
+++ b/drivers/staging/winbond/sme_api.h
@@ -107,7 +107,7 @@ s8 sme_set_bssid_list_scan(void *pcore_data, void *pscan_para);
s8 sme_set_reload_defaults(void *pcore_data, u8 reload_type);
-/*------------------------- none-standard ----------------------------------*/
+/*------------------------- non-standard ----------------------------------*/
s8 sme_get_connect_status(void *pcore_data, u8 *pstatus);
/*--------------------------------------------------------------------------*/
diff --git a/drivers/staging/winbond/wb35reg.c b/drivers/staging/winbond/wb35reg.c
index da595f1..1bff7d1 100644
--- a/drivers/staging/winbond/wb35reg.c
+++ b/drivers/staging/winbond/wb35reg.c
@@ -217,7 +217,7 @@ unsigned char Wb35Reg_Write(struct hw_data *pHwData, u16 RegisterNo, u32 Registe
* This command will be executed with a user defined value. When it completes,
* this value is useful. For example, hal_set_current_channel will use it.
* true : read command process successfully
- * false : register not support
+ * false : register not supported
*/
unsigned char Wb35Reg_WriteWithCallbackValue(struct hw_data *pHwData,
u16 RegisterNo,
@@ -631,7 +631,7 @@ unsigned char Wb35Reg_initial(struct hw_data *pHwData)
* CardComputeCrc --
*
* Description:
- * Runs the AUTODIN II CRC algorithm on buffer Buffer of length, Length.
+ * Runs the AUTODIN II CRC algorithm on the buffers Buffer length.
*
* Arguments:
* Buffer - the input buffer
diff --git a/drivers/staging/winbond/wb35tx.c b/drivers/staging/winbond/wb35tx.c
index 5df39d4..0f870da 100644
--- a/drivers/staging/winbond/wb35tx.c
+++ b/drivers/staging/winbond/wb35tx.c
@@ -149,14 +149,14 @@ void Wb35Tx_stop(struct hw_data * pHwData)
{
struct wb35_tx *pWb35Tx = &pHwData->Wb35Tx;
- // Trying to canceling the Trp of EP2
+ // Try to cancel the Trp of EP2
if (pWb35Tx->EP2vm_state == VM_RUNNING)
- usb_unlink_urb( pWb35Tx->Tx2Urb ); // Only use unlink, let Wb35Tx_destrot to free them
+ usb_unlink_urb( pWb35Tx->Tx2Urb ); // Only use unlink, let Wb35Tx_destroy to free them
pr_debug("EP2 Tx stop\n");
- // Trying to canceling the Irp of EP4
+ // Try to cancel the Irp of EP4
if (pWb35Tx->EP4vm_state == VM_RUNNING)
- usb_unlink_urb( pWb35Tx->Tx4Urb ); // Only use unlink, let Wb35Tx_destrot to free them
+ usb_unlink_urb( pWb35Tx->Tx4Urb ); // Only use unlink, let Wb35Tx_destroy to free them
pr_debug("EP4 Tx stop\n");
}
diff --git a/drivers/staging/winbond/wb35tx_s.h b/drivers/staging/winbond/wb35tx_s.h
index f70f433..9186526 100644
--- a/drivers/staging/winbond/wb35tx_s.h
+++ b/drivers/staging/winbond/wb35tx_s.h
@@ -41,7 +41,7 @@ struct wb35_tx {
int EP4VM_status;
u32 TxFillCount; // 20060928
- u32 TxTimer; // 20060928 Add if sending packet not great than 13
+ u32 TxTimer; // 20060928 Add if sending packet is greater than 13
};
#endif
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists