| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1346844964-24839-1-git-send-email-sourav.poddar@ti.com>
Date: Wed, 5 Sep 2012 17:06:04 +0530
From: Sourav Poddar <sourav.poddar@...com>
To: <devicetree-discuss@...ts.ozlabs.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-input@...r.kernel.org>, <sourav.poddar@...com>
CC: <b-cousson@...com>, <balbi@...com>, <santosh.shilimkar@...com>,
<sameo@...ux.intel.com>
Subject: [PATCHv2 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
smsc ece1099 is a keyboard scan or gpio expansion device.
The patch create keypad and gpio expander child for this
multi function smsc driver.
Cc: Samuel Ortiz <sameo@...ux.intel.com>
Cc: Benoit Cousson <b-cousson@...com>
Cc: Felipe Balbi <balbi@...com>
Cc: Santosh Shilimkar <santosh.shilimkar@...com>
Signed-off-by: Sourav Poddar <sourav.poddar@...com>
---
Changes since v1:
- Use Kconfig option correctly
- Add regmap_config paramters
- Modify formatting of logs for devid
- Move read/write function to headed file as an inline
function.
Documentation/smsc_ece1099.txt | 56 ++++++++++++++++++++
drivers/mfd/Kconfig | 12 ++++
drivers/mfd/Makefile | 1 +
drivers/mfd/smsc-ece1099.c | 110 +++++++++++++++++++++++++++++++++++++++
include/linux/mfd/smsc.h | 111 ++++++++++++++++++++++++++++++++++++++++
5 files changed, 290 insertions(+), 0 deletions(-)
create mode 100644 Documentation/smsc_ece1099.txt
create mode 100644 drivers/mfd/smsc-ece1099.c
create mode 100644 include/linux/mfd/smsc.h
diff --git a/Documentation/smsc_ece1099.txt b/Documentation/smsc_ece1099.txt
new file mode 100644
index 0000000..6b492e8
--- /dev/null
+++ b/Documentation/smsc_ece1099.txt
@@ -0,0 +1,56 @@
+What is smsc-ece1099?
+----------------------
+
+The ECE1099 is a 40-Pin 3.3V Keyboard Scan Expansion
+or GPIO Expansion device. The device supports a keyboard
+scan matrix of 23x8. The device is connected to a Master
+via the SMSC BC-Link interface or via the SMBus.
+Keypad scan Input(KSI) and Keypad Scan Output(KSO) signals
+are multiplexed with GPIOs.
+
+Interrupt generation
+--------------------
+
+Interrupts can be generated by an edge detection on a GPIO
+pin or an edge detection on one of the bus interface pins.
+Interrupts can also be detected on the keyboard scan interface.
+The bus interrupt pin (BC_INT# or SMBUS_INT#) is asserted if
+any bit in one of the Interrupt Status registers is 1 and
+the corresponding Interrupt Mask bit is also 1.
+
+In order for software to determine which device is the source
+of an interrupt, it should first read the Group Interrupt Status Register
+to determine which Status register group is a source for the interrupt.
+Software should read both the Status register and the associated Mask register,
+then AND the two values together. Bits that are 1 in the result of the AND
+are active interrupts. Software clears an interrupt by writing a 1 to the
+corresponding bit in the Status register.
+
+Communication Protocol
+----------------------
+
+- SMbus slave Interface
+ The host processor communicates with the ECE1099 device
+ through a series of read/write registers via the SMBus
+ interface. SMBus is a serial communication protocol between
+ a computer host and its peripheral devices. The SMBus data
+ rate is 10KHz minimum to 400 KHz maximum
+
+- Slave Bus Interface
+ The ECE1099 device SMBus implementation is a subset of the
+ SMBus interface to the host. The device is a slave-only SMBus device.
+ The implementation in the device is a subset of SMBus since it
+ only supports four protocols.
+
+ The Write Byte, Read Byte, Send Byte, and Receive Byte protocols are the
+ only valid SMBus protocols for the device.
+
+- BC-LinkTM Interface
+ The BC-Link is a proprietary bus that allows communication
+ between a Master device and a Companion device. The Master
+ device uses this serial bus to read and write registers
+ located on the Companion device. The bus comprises three signals,
+ BC_CLK, BC_DAT and BC_INT#. The Master device always provides the
+ clock, BC_CLK, and the Companion device is the source for an
+ independent asynchronous interrupt signal, BC_INT#. The ECE1099
+ supports BC-Link speeds up to 24MHz.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d1facef..991ef15 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -385,6 +385,18 @@ config MFD_T7L66XB
help
Support for Toshiba Mobile IO Controller T7L66XB
+config MFD_SMSC
+ bool "Support for the SMSC ECE1099 series chips"
+ depends on I2C=y
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the
+ ece1099 chips from SMSC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called smsc.
+
config MFD_TC6387XB
bool "Support Toshiba TC6387XB"
depends on ARM && HAVE_CLK
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 79dd22d..f587d91 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o
obj-$(CONFIG_MCP) += mcp-core.o
obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o
obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o
+obj-$(CONFIG_MFD_SMSC) += smsc.o
obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o
ifeq ($(CONFIG_SA1100_ASSABET),y)
diff --git a/drivers/mfd/smsc-ece1099.c b/drivers/mfd/smsc-ece1099.c
new file mode 100644
index 0000000..73a6cb7
--- /dev/null
+++ b/drivers/mfd/smsc-ece1099.c
@@ -0,0 +1,110 @@
+/*
+ * TI SMSC MFD Driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Sourav Poddar <sourav.poddar@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; GPL v2.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/irq.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/smsc.h>
+#include <linux/of_platform.h>
+
+static struct regmap_config smsc_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = SMSC_MAX_REGISTER - 1;
+ .cache_type = REGCACHE_COMPRESSED,
+};
+
+static const struct of_device_id of_smsc_match[] = {
+ { .compatible = "smsc,ece1099", },
+ { },
+};
+
+static int smsc_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct device_node *node = i2c->dev.of_node;
+ struct smsc *smsc;
+ int ret = 0;
+
+ smsc = devm_kzalloc(&i2c->dev, sizeof(struct smsc),
+ GFP_KERNEL);
+
+ smsc->regmap = devm_regmap_init_i2c(i2c, &smsc_regmap_config);
+ if (IS_ERR(smsc->regmap)) {
+ ret = PTR_ERR(smsc->regmap);
+ goto err;
+ }
+
+ i2c_set_clientdata(i2c, smsc);
+ smsc->dev = &i2c->dev;
+
+#ifdef CONFIG_OF
+ of_property_read_u32(node, "clock", &smsc->clk);
+#endif
+
+ regmap_read(smsc->regmap, SMSC_DEV_ID, &devid);
+ regmap_read(smsc->regmap, SMSC_DEV_REV, &rev);
+ regmap_read(smsc->regmap, SMSC_VEN_ID_L, &venid_l);
+ regmap_read(smsc->regmap, SMSC_VEN_ID_H, &venid_h);
+
+ dev_info(&i2c->dev, "SMSCxxx devid: %02x rev: %02x venid: %02x\n",
+ devid, rev, (venid_h << 8) | venid_l);
+
+ ret = regmap_write(smsc->regmap, SMSC_CLK_CTRL, smsc->clk);
+ if (ret)
+ goto err;
+
+ if (node)
+ ret = of_platform_populate(node, NULL, NULL, &i2c->dev);
+
+ return ret;
+
+err:
+ return ret;
+}
+
+static int smsc_i2c_remove(struct i2c_client *i2c)
+{
+ return 0;
+}
+
+static const struct i2c_device_id smsc_i2c_id[] = {
+ { "smscece1099", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, smsc_i2c_id);
+
+static struct i2c_driver smsc_i2c_driver = {
+ .driver = {
+ .name = "smsc",
+ .of_match_table = of_smsc_match,
+ .owner = THIS_MODULE,
+ },
+ .probe = smsc_i2c_probe,
+ .remove = smsc_i2c_remove,
+ .id_table = smsc_i2c_id,
+};
+
+module_i2c_driver(smsc_i2c_driver);
+
+MODULE_AUTHOR("Sourav Poddar <sourav.poddar@...com>");
+MODULE_DESCRIPTION("SMSC chip multi-function driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/smsc.h b/include/linux/mfd/smsc.h
new file mode 100644
index 0000000..adfaec2
--- /dev/null
+++ b/include/linux/mfd/smsc.h
@@ -0,0 +1,111 @@
+/*
+ * SMSC ECE1099
+ *
+ * Copyright 2012 Texas Instruments Inc.
+ *
+ * Author: Sourav Poddar <sourav.poddar@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_SMSC_H
+#define __LINUX_MFD_SMSC_H
+
+#include <linux/regmap.h>
+
+#define SMSC_ID_ECE1099 1
+#define SMSC_NUM_CLIENTS 2
+
+#define SMSC_BASE_ADDR 0x38
+#define OMAP_GPIO_SMSC_IRQ 151
+
+#define SMSC_MAXGPIO 32
+#define SMSC_BANK(offs) ((offs) >> 3)
+#define SMSC_BIT(offs) (1u << ((offs) & 0x7))
+
+struct smsc {
+ struct device *dev;
+ struct i2c_client *i2c_clients[SMSC_NUM_CLIENTS];
+ struct regmap *regmap;
+ int clk;
+ /* Stored chip id */
+ int id;
+};
+
+struct smsc_gpio;
+struct smsc_keypad;
+
+static inline int smsc_read(struct device *child, unsigned int reg,
+ unsigned int *dest)
+{
+ struct smsc *smsc = dev_get_drvdata(child->parent);
+
+ return regmap_read(smsc->regmap, reg, dest);
+}
+
+static inline int smsc_write(struct device *child, unsigned int reg,
+ unsigned int value)
+{
+ struct smsc *smsc = dev_get_drvdata(child->parent);
+
+ return regmap_write(smsc->regmap, reg, value);
+}
+
+/* Registers for SMSC */
+#define SMSC_RESET 0xF5
+#define SMSC_GRP_INT 0xF9
+#define SMSC_CLK_CTRL 0xFA
+#define SMSC_WKUP_CTRL 0xFB
+#define SMSC_DEV_ID 0xFC
+#define SMSC_DEV_REV 0xFD
+#define SMSC_VEN_ID_L 0xFE
+#define SMSC_VEN_ID_H 0xFF
+
+#define SMSC_MAX_REG (SMSC_VEN_ID_H + 1)
+
+/* CLK VALUE */
+#define SMSC_CLK_VALUE 0x13
+
+/* Registers for function GPIO INPUT */
+#define SMSC_GPIO_DATA_IN_START 0x00
+
+/* Registers for function GPIO OUPUT */
+#define SMSC_GPIO_DATA_OUT_START 0x05
+
+/* Definitions for SMSC GPIO CONFIGURATION REGISTER*/
+#define SMSC_GPIO_INPUT_LOW 0x01
+#define SMSC_GPIO_INPUT_RISING 0x09
+#define SMSC_GPIO_INPUT_FALLING 0x11
+#define SMSC_GPIO_INPUT_BOTH_EDGE 0x19
+#define SMSC_GPIO_OUTPUT_PP 0x21
+#define SMSC_GPIO_OUTPUT_OP 0x31
+
+#define GRP_INT_STAT 0xf9
+#define SMSC_GPI_INT 0x0f
+#define SMSC_CFG_START 0x0A
+
+/* Registers for SMSC GPIO INTERRUPT STATUS REGISTER*/
+#define SMSC_GPIO_INT_STAT_START 0x32
+
+/* Registers for SMSC GPIO INTERRUPT MASK REGISTER*/
+#define SMSC_GPIO_INT_MASK_START 0x37
+
+/* Registers for SMSC function KEYPAD*/
+#define SMSC_KP_OUT 0x40
+#define SMSC_KP_IN 0x41
+#define SMSC_KP_INT_STAT 0x42
+#define SMSC_KP_INT_MASK 0x43
+
+/* Definitions for keypad */
+#define SMSC_KP_KSO 0x70
+#define SMSC_KP_KSI 0x51
+#define SMSC_KSO_ALL_LOW 0x20
+#define SMSC_KP_SET_LOW_PWR 0x0B
+#define SMSC_KP_SET_HIGH 0xFF
+#define SMSC_KSO_EVAL 0x00
+
+#endif /* __LINUX_MFD_SMSC_H */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists